Your oven has 3 pyrolysis symbols that correspond to 1 two-hour pyro (non-
adjustable).
You can select the two other cycles ( 1h45, or 1h30) non-adjustable, by
pressing the - or +.
The oven cannot be used for 2h, 2h15 or 2h30. This length of time includes the
required cooling time until the door unlocks.
d) Press the START/STOP touch control.
The door is locked during pyro-cleaning (after about 6 minutes).
You can consult the finishing time for the pyro-clean cycle by pressing touch control
. At the end of pyro-cleaning the symbol remains lit until the door is
automatically unlocked.
e) Stop the oven by pressing the START/STOP touch control.
f) Use a damp cloth for removing the white ash after the oven has cooled down.
The oven is now ready for use.
Note: The pyro-cleaning temperature cannot be altered. During the cleaning cycle
the light is switched off. If your oven is still not clean after pyro-cleaning you have
delayed cleaning too long. Repeat the pyro-clean program.
2) How to program your pyro-clean to start when you want
Follow the instructions given in the section entitled “How to use the pyro-clean
program”, then:
a) Press touch control , the finishing time for the pyro-clean program
flashes and the symbol also flashes to show that this time can be modified.
b) Set the time the program is due to finish by pressing the + or
-.
Example: End of the pyro-clean program at 5h00.
When the pyro-clean program is over, press the START/STOP touch control.
