13
WHILE THE OVEN IS OPERATING :
• You may stop or start the turntable revolving during a programme by pressing the TURN-
TABLE
SSTTOOPP
kkeeyy
.
• To change a programme, press the
CC
//
SSTTOOPP
key twice and programme again.
• If you open the door before the end of the programme, shut the door and press the
SSTTAARRTT
key to continue the programme.
• When using the defrost function
(150W), turn the food midway through the programme to
obtain the best results. Close the door and press the
START key to continue the second
half of the programme.
• If you remove a dish before the end of the programme, press the
CC
//
SSTTOOPP
key twice to
erase the programme.
4 / USING THE OVEN EN
5/ MAINTAINING AND CLEANING YOUR APPLIANCE
We recommend that you clean the oven regularly and remove any deposits of food inside
and outside of the appliance. Use a damp sponge and a little soap. If the appliance is not
cleaned regularly, its surface could become damaged, permanently affecting the
appliance’s lifespan and possibly causing a safety hazard. If the door or door seal are
damaged, the oven should not be used until it has been repaired by a qualified person.
Do not clean the appliance with a steam cleaner.
The use of abrasive products, alcohol or thinners is not recommended as they are likely to
damage the appliance.
Do not use abrasive maintenance products or hard metal scrapers to clean the oven door
as they may scratch the surface or break the glass.
If the oven smells bad or is dirty, boil a cup of water with lemon juice for 2 minutes and
clean the walls with a small amount of washing up liquid.
The turntable can be removed for easy cleaning. To remove it, pick it up using the access
zones provided for this purpose. If you take out the support with the drive spindle, make
sure you do not let water get into the motor spindle orifice.
Remember to put back the support, the support wheels and the turntable.
