(after 1/2 hour, 1 hour, 2 hours).
• Press the OK icon (B9) to confirm.
• Press the icon (B6) to exit.
Setting the clock
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"SET CLOCK" is displayed.
• Press the OK icon (B9).
• Use the icons (B7) and (B8) to set the
hour, then press the OK icon (B9) to confirm.
• Use the icons (B7) and (B8) to set the
minutes, then press the OK icon (B9) to con-
firm.
• Press the icon (B6) to exit the menu.
Setting auto-start time
This function programmes the time the machine
will come on automatically.
• Make sure the clock on the appliance has
been set.
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"START TIME" is displayed.
• Press the OK icon (B9).
• Use the icons (B7) and (B8) to set the
auto-start time, then press the OK icon (B9)
to confirm.
• Use the icons (B7) and (B8) to set the
minutes, then press the OK icon (B9) to con-
firm.
Auto-start
• Press the icons (B7) and (B8) to acti-
vate the auto-start function until "AUTO
START" is displayed.
• Press the OK icon (B9) to confirm.
The symbol appears on the display.
• Press the icon (B6) to exit the menu.
• To deactivate the automatic start-up function,
press the SET (B2) icon, then press the
(B7) and (B8) icons until the appliance
displays the message AUTO START. Press
the OK (B9) icon. CONFIRM will appear on
the display.
Press to deactivate and the symbol
will disappear.
Changing coffee temperature
To change coffee temperature, proceed as fol-
lows:
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"TEMPERATURE" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) to se-
lect the required coffee temperature from
low, medium and high.
• Press the OK button (B9) to confirm the tem-
perature selected.
• Press the icon (B6) to exit the menu.
Setting water hardness
The operating period can be extended if required,
making descaling less frequent by programming
the machine on the basis of the real lime content
in the water used.
Proceed as follows:
• Remove the "Total Hardness Test" strip (atta-
ched to page 2) from its packaging then dip
it fully in the water for a few seconds,
Then remove and wait about 30 seconds
(until it changes colour and forms red squa-
res).
• Turn the appliance on by pressing the On-
Off/stand-by button (A7).
• Press the SET icon (B2) to enter the menu
and then the icons (B7) and (B8) until
"WATER HARDNESS" is displayed.
• Press the OK icon (B9).
• Press the icons (B7) and (B8) until
the number coincides with the number of red
squares on the test strip (for example, if there
are 3 red squares on the test strip, select the
message "WATER HARDNESS 3" .
• Press the OK icon (B9) to confirm.
The coffee maker is now programmed to pro-
vide the descale warning when actually ne-
cessary.
Programming coffee
For instructions on programming coffee, see the
21
EN
