2.5.13 Setting Gravity Sensor Sensitivity. (G-Sensor)
The dash camera will automatically lock the video recording when it is shaken. This is
important in a crash as you may become disorientated or not be able to lock the file which
has recorded the incident. The level of sensitivity is set by selecting the required amount of
G Force required to cause the video to lock.
In the menu select ‘G-Sensor’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm. (2G/ 2.5G/ 3G/ 3.5G/ 4G/ 4.5G/
OFF )
2.5.14 Setting Buttons Beep Volume.
In the menu select ‘Key Beep’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm. (ON / OFF)
2.5.15 Select Language
In the menu select ‘Language’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm. (English / Russian / …)
2.5.16 Reset to Default Settings
This function allows the device to be reset to factory setting.
In the menu select ‘Default Setting’, then press OK button to enter, use the UP and DOWN
buttons to scroll through options and press OK to confirm. (Yes / No)
2.5.17 Format the microSD card
This is to format the memory card, which will remove all the data.
In the menu select ‘Format’, then press OK button to enter, use the UP and DOWN buttons
to scroll through options and press OK to confirm. (Yes / No)
2.5.18 Firmware Version
This shows the software version installed on the dash camera
2.5.19 Setting Video Stamp
This is the information that will be printed onto the video recording. There is the options to
show the Date, Time, GPS speed, Driver Number or Off. Not all the information will fit onto
the video stamp so the decision needs to be made as to which information is deemed most
relevant.
In the menu select ‘Stamp’, then press OK button to enter, use the UP and DOWN buttons
to scroll through options and press OK to confirm.
