1
Positioning the unit
Before setting up, remove
the fixing tape on the bottom
which is securing the power
supply cord, then take out
the power supply cord.
Power supply cord
Fixing tape (blue)
Pointers for good positioning
• Choose a position from where airow can reach all areas of the
room.
• Place on a stable surface. If the unit is placed on an unstable
surface, vibrations from the unit may be amplied.
• If interference from the power circuit inside the unit or cables
causes disturbance of TV screen images or the emission of
static noise from nearby radios or stereos, move the unit to at
least 2m away from the device.
Keep cordless phones and radio-controlled clocks away from
the unit also.
Attention
• To avoid staining of walls, position the unit in accordance with
the positioning measurements in the illustration. However, note
that since this unit draws in dirty air, certain types of wall may
become stained even if the measurements are adhered to.
In such cases, be sure to maintain sufcient distance between
the unit and the wall.
• When used for a prolonged period in the same location, the
oor and surrounding walls may become stained as air is drawn
into air inlets near the base of the unit. Periodic cleaning is
recommended.
At least 100cm
away from ceiling
At least 30cm
away from wall
Air ow
At least 10cm
away from wall
At least 30cm
away from wall
Do not use in the following places
Places exposed to direct sunlight
(A decline in the receptivity of the signal from the remote
controller or discolouration may result)
Positions near combustion-based heating and other
high temperature devices
(Discolouration/deformation due to overheating may
result)
Places where chemicals and pharmaceuticals are
used such as hospitals, factories, laboratories, beauty
salons, and photographic laboratories
(Volatilised chemicals and solvents may degrade
mechanical parts and lead to malfunction)
Places with high levels of electromagnetic waves such
as near an electromagnetic cooker, speakers, etc.
The unit may not function correctly.
Places exposed to soot (conductive dust) released by
candles, aromatic candles, etc.
The performance of the lters may be impaired, causing
the room to become dirty due to the build-up of dust that
is not captured.
Do not use cosmetics etc., containing silicone* near
the unit.
* Hair care products (split ends coating agents, hair
mousse, hair treatment agents etc.), cosmetics,
antiperspirants, antistatic agents, waterproof sprays,
lustering agents, glass cleaners, chemical wiping
cloths, wax, etc.
• Insulators such as silicone may adhere to the needle
ofthe streamer unit, and the streamer discharge may
not be generated.
• The dust collection lter may become clogged up,
resulting in loss of air purifying capacity.
Do not use an ultrasonic humidier or similar
appliance near the unit.
The dust collection lter may become clogged up,
resulting in loss of air purifying capacity.
Keep out of
direct sunlight
Do not block air
inlets or air outlet
Do not expose to direct airow
Keep TVs and radios
at least 2m away
