670274

Dahua IPC-PFW8601-A180 Handleiding

135
Verklein
Vergroot
Pagina terug
1/144
Pagina verder
Dahua Network Camera Web 3.0 Operation Manual
i
Dahua Network Camera Web3.0 Operation Manual
Version 1.0.1
Dahua Vision Technology CO., LTD
Dahua Network Camera Web 3.0 Operation Manual
ii
Table of Contents
1 Network Config ............................................................................................................................ 1
1.1 Network Connection ..................................................................................................... 1
1.2 Log in .............................................................................................................................. 1
2 Live ................................................................................................................................................ 6
2.1 Encode Setup ................................................................................................................ 6
2.2 System Menu ................................................................................................................. 7
2.3 Video Window Function Option .................................................................................. 7
2.4 Video Window Setup .................................................................................................... 8
2.4.1 Image Adjustment ..................................................................................................... 8
2.4.2 Original Size ............................................................................................................. 9
2.4.3 Full Screen ................................................................................................................ 9
2.4.4 Width and Height Ratio .......................................................................................... 10
2.4.5 Fluency Adjustment ................................................................................................ 10
2.4.6 Rules Info ............................................................................................................... 10
2.4.7 Zoom and Focus ..................................................................................................... 10
2.4.8 Fisheye/Trigger Track ............................................................................................ 10
3 PTZ Control ................................................................................................................................ 15
3.1 Scan .............................................................................................................................. 16
3.2 Preset ............................................................................................................................ 17
3.3 Tour ............................................................................................................................... 17
3.4 Pattern .......................................................................................................................... 18
3.5 Assistant ....................................................................................................................... 19
3.6 Light Wiper ................................................................................................................... 19
4 Playback ..................................................................................................................................... 20
4.1 Playback ....................................................................................................................... 20
4.1.1 Function of Play ...................................................................................................... 21
4.1.2 Playback File .......................................................................................................... 22
4.1.3 Playback Cut ........................................................................................................... 24
4.1.4 Record Type ........................................................................................................... 24
4.1.5 Progress Bar ............................................................................................................ 24
4.1.6 Assistant Function .................................................................................................. 25
4.2 Picture Playback ......................................................................................................... 25
4.2.1 Play ......................................................................................................................... 26
4.2.2 Playback File .......................................................................................................... 26
4.2.3 Snapshot Type ........................................................................................................ 28
5 Setup ........................................................................................................................................... 30
5.1 Camera ......................................................................................................................... 30
Dahua Network Camera Web 3.0 Operation Manual
iii
5.1.1 Conditions ............................................................................................................... 30
5.1.2 Video ...................................................................................................................... 42
5.1.3 Audio ...................................................................................................................... 54
5.2 Network ......................................................................................................................... 56
5.2.1 TCP/IP .................................................................................................................... 56
5.2.2 Connection .............................................................................................................. 59
5.2.3 PPPoE ..................................................................................................................... 61
5.2.4 DDNS ..................................................................................................................... 62
5.2.5 IP filter .................................................................................................................... 64
5.2.6 SMTP （e-mail) ..................................................................................................... 64
5.2.7 UPnP ....................................................................................................................... 66
5.2.8 SNMP ..................................................................................................................... 67
5.2.9 Bonjour ................................................................................................................... 69
5.2.10 Multicast ................................................................................................................. 70
5.2.11 4G ........................................................................................................................... 70
5.2.12 WIFI ........................................................................................................................ 72
5.2.13 802.1x ..................................................................................................................... 75
5.2.14 QoS ......................................................................................................................... 76
5.2.15 HTTPs ..................................................................................................................... 77
5.3 Event ............................................................................................................................. 86
5.3.1 Video detection ....................................................................................................... 86
5.3.2 Audio Detection ...................................................................................................... 93
5.3.3 Smart Plan ............................................................................................................... 95
5.3.4 Intelligence Behavior Analytics ............................................................................. 95
5.3.5 Face Detection ...................................................................................................... 103
5.3.6 People Counting ................................................................................................... 105
5.3.7 Heat Map .............................................................................................................. 107
5.3.8 Alarm .................................................................................................................... 110
5.3.9 Abnormity ............................................................................................................. 114
5.4 Storage Management ............................................................................................... 117
5.4.1 Schedule ................................................................................................................ 117
5.4.2 Destination ............................................................................................................ 121
5.4.3 Record control ...................................................................................................... 124
5.5 System ........................................................................................................................ 125
5.5.1 General .................................................................................................................. 125
5.5.2 Account ................................................................................................................. 127
5.5.3 PTZ ....................................................................................................................... 130
5.5.4 Default .................................................................................................................. 131
5.5.5 Import/Export ....................................................................................................... 132
Dahua Network Camera Web 3.0 Operation Manual
iv
5.5.6 Remote control ........................................................................................................ 132
5.5.6 Auto Maintenance ................................................................................................. 133
5.5.7 Upgrade ................................................................................................................ 134
5.6 Information ................................................................................................................. 134
5.6.1 Version .................................................................................................................. 134
5.6.2 Log ........................................................................................................................ 135
5.6.3 Online User ........................................................................................................... 135
6 Alarm ......................................................................................................................................... 137
7 Log out ...................................................................................................................................... 139
Dahua Network Camera Web 3.0 Operation Manual
v
Important
The following functions are for reference only. Some series products may not
support all the functions listed below.
Dahua Network Camera Web 3.0 Operation Manual
1
1 Network Config
1.1 Network Connection
Network camera and PC connection mainly has two ways, see Figure 1- 1 and Figure 1-2.
Figure 1- 1
Figure 1-2
Before you access network camera via the Internet, you need to have its IP address. User can use
Config Tool to search IP of the network camera. Please refer to Config Tool manual.
1.2 Log in
It needs to install WEB plug-in when you use WEB client for the first time, the exact operation steps are
shown as follows:
Open IE and input network camera address in the address bar. (The factory default IP address is
192.168.1.108).
Dahua Network Camera Web 3.0 Operation Manual
2
After successful connection, the login interface is shown as in Figure 1-3; input your user name and
password. Default factory username is admin and password is admin.
Figure 1-3
The system will display “Update Password” prompt box for your first login, users need to modify the
password and save it properly.
Figure 1-4
After successful login, you may see the interface shown as in Figure 1-5.
Dahua Network Camera Web 3.0 Operation Manual
3
Figure 1-5
Click on “Please click here to download and install the plug-in”. The system pops up warning information
to ask you whether run or save this plug-in. See Figure 1-6.
Dahua Network Camera Web 3.0 Operation Manual
4
Figure 1-6
You must either run or save the file to local and install it. Follow the following steps. Click on run, you
will see Figure 1-7and Figure 1-8.
Figure 1-7
Dahua Network Camera Web 3.0 Operation Manual
5
Figure 1-8
When plug-in installation completes, the installation page closes automatically. The web-end will refresh
automatically, and then you can view video captured by the camera.
Figure 1-9
Dahua Network Camera Web 3.0 Operation Manual
6
2 Live
After you logged in, you can see the live monitor window. See Figure 2-1.
Figure 2-1
There are four sections:
Section 1: Encode setup bar
Section 2: System menu
Section 3: Window function option bar
Section 4: Window adjust bar
2.1 Encode Setup
Note: Some series don’t support sub stream 2.
The encode setup interface is shown as in Figure 2-2.
Figure 2-2
Please refer to the following sheet for detailed information.
2
3
1
4
Dahua Network Camera Web 3.0 Operation Manual
7
Parameter
Function
Main stream
Click it to enable main stream video monitoring and click again
to disable it. Generally for storage and monitor.
Sub Stream 1
Click it to enable Sub Stream1 video monitoring and click again
to disable it. When network bandwidth is insufficient, it
substitutes main stream for monitoring.
Sub Stream 2
Click it to enable Sub Stream 2 video monitoring and click again
to disable it. When network bandwidth is insufficient, it
substitutes main stream for monitoring.
Protocol
You can select stream media protocol from the dropdown list.
There are three options: TCP/UDP/Multicast
2.2 System Menu
System menu is shown as in Figure 2-3.
Please refer to chapter 2 Live, chapter 3 PTZ, chapter 4 Playback, chapter 5 Setup, chapter 6 Alarm,
chapter 7 Log out for detailed information.
Figure 2-3
2.3 Video Window Function Option
The interface is shown as below. See Figure 2-4.
Figure 2-4
Please refer to the following sheet for detailed information.
SN
Parameter
Function
1
Relay-out
It shows if there is any alarm output, status description is as
follows:
Red: means there is alarm output.
Grey: means alarm is over.
Click on the button to force alarm to be on or off.
1 2 3 4 5 6 7 8 9
Dahua Network Camera Web 3.0 Operation Manual
8
2
Digital
Zoom
When the video is in the original status, click it you can
select any zone to zoom in. In the non-original status,
you can drag the zoom-in zone in specified range. Right
click mouse to restore previous status.
Click it; you can use the middle button of the mouse to
zoom in/out the video size.
3
Snapshot
Click on the button to snapshot, save picture to path in Ch
5.1.2.5.
4
Triple
Snapshot
Click it to take snapshot upon the video at the frequency of
one picture per second. All images are saved to path in Ch
5.1.2.5.
5
Record
Click it to record the video. All videos are saved to path in
Chapter 5.1.2.5.
6
Easy focus
Click it, you can see there are two parameters on the preview
video：AF Peak and AF Max.
AF Peak: It is to display the video definition during the focus
process.
AF Max: It is the most suitable value for the video definition.
The close the AF Peak and AF Max is, the better the focus
effect is.
7
Audio
Turn on or off audio when you are monitoring.
8
Talk
Click it to start or end bidirectional talk.
9
Help
Click it to open help file.
2.4 Video Window Setup
The interface is shown as in Figure 2-5.
Figure 2-5
2.4.1 Image Adjustment
See Figure 2-6 for image adjustment.
Dahua Network Camera Web 3.0 Operation Manual
9
Figure 2-6
Click this button to display/hide image control interface. Click it to open picture setup interface. This
interface is on the top right pane.
Please refer to the following sheet for detailed information.
Parameter
Function
Video
setup
It is to adjust monitor video
brightness.
Note:
All the operations here apply
to WEB end only.
Please go to Setup-
>Camera->Conditions to
adjust corresponding items.
It is to adjust monitor video
contrastness.
It is to adjust monitor video
hue.
It is to adjust monitor video
saturation.
Reset
R
e
Restore brightness,
contrastness saturation and
hue to system default setup.
2.4.2 Original Size
Click this button to go to original size. It is to display the actual size of the video stream. It depends on
the resolution of the bit stream.
2.4.3 Full Screen
Click it to go to full-screen mode. Double click the mouse or click the Esc button to exit the full screen.
Dahua Network Camera Web 3.0 Operation Manual
10
2.4.4 Width and Height Ratio
Click it to restore original ratio or suitable window.
2.4.5 Fluency Adjustment
There are three levels of fluency for you to select (Realtime, Normal, and Fluency). The default is
normal.
2.4.6 Rules Info
Click the button, preview image will display intelligent rules after enabling; it is “enable” by default.
2.4.7 Zoom and Focus
Click this button and the focus zooming interface appears on the right of preview interface, as shown in
Figure 2-7, click left mouse button to adjust focus zooming configuration.
Note:
· The product series which support motorized zoom, synchronous focus and back focus have this
button.
· Auto-focus after zoom and focus adjustment.
2.4.8 Fisheye/Trigger Track
Click the button, installation mode and display mode interface will show up on the right of the preview
interface, see Figure 2-8 and Figure 2-9, single click to switch different installation mode and display
mode, or different display modes, it is enabled by default.
Note:
It is only supported by some models.
Figure 2-7
Dahua Network Camera Web 3.0 Operation Manual
11
Parameter
Function
Zoom
Adjust the focal length of the lens by clicking or long pressing “+”“-”buttons.
Step length is used to adjust the length of one step with one click.
Focus
Adjust the sharpness of the lens by clicking or long pressing“+”、“-” buttons.
Step length is used to adjust the length of one step with one click.
Auto-
focus
Click to adjust the image definition automatically.
Note:
Other lens operations are not allowed during the process of auto-focus.
Reset All
Reset the lens to zero position to eliminate the accumulative error of lens.
Note:
Please reset when the image adjustment is not clear or operating zoom focus many
times.
Refresh
Synchronize the location of drag slider of lens and zoom focus after hardware zoom
focusing.
Regional
Focus
Click it and use the mouse to select a zone, then the device can auto focus within the
specific region.
In-ceiling Mount Wall Mount Ground Mount
Dahua Network Camera Web 3.0 Operation Manual
12
Figure 2-8
parameter
Note
Installation Mode
Three modes which are ceiling mount, wall mount and ground mount.
Display Mode
It represents the display mode of the current image (default supports original
image mode), the display modes may be different according to different
installation modes. It is shown as follows:
Ceiling: 1P+1、2P、1+2、1+3、1+4、1P+6、1+8。
Wall: 1P、1P+3、1P+4、1P+8。
Ground: 1P+1、2P、1+3、1+4、1P+6、1+8。
Note:
The default displays original image mode when switching installation mode.
In-ceiling/Wall/Ground
Original
image
It menas the original image without de-warpping
In-ceiling/Ground
1P+1
360°expanded rectangular panorama + independent
sub image, the sub image and the subbox in the
expanded rectangular panorama support zoom and
movement, for the expanded rectangular panorama
also supports left and right starting point movement.
2P
Two related 180° expanded rectangular pictures, two
subwindows form 360° panorama anytime, which is
also called “dual panorama”. Two expanded
rectangular pictures both support left and right
movement starting point, which are also linked by
eachother.
1+2
Original image + 2 independent sub images, both the
sub image and the subbox in the original image
support zoom and movement. The original image also
supports changing starting point by rotation (no such
display mode for ground installation).
1+3
Original image + 2 independent sub images, both the
sub image and the subbox in the original image
support zoom and movement. The original image also
supports changing starting point by rotation
1+4
Original image + 4 independent sub images, both the
sub image and the subbox in the original image
support zoom and movement. The original image also
supports changing starting point by rotation
Dahua Network Camera Web 3.0 Operation Manual
13
parameter
Note
1P+6
360°expanded rectangular panorama +6 independent
sub image, both the sub image and the subbox in the
expanded rectangular panorama support zoom and
movement, for the expanded rectangular panorama
also supports left and right starting point movement.
1+8
Original image + 8 independent sub images, both the
sub image and the subbox in the original image
support zoom and movement. The original image also
supports changing starting point by rotation
Wall
1P
From left to right 180° expanded rectangular
panorama, which supports up and down movement
and changes vertical angle of view.
1P+3
180° expanded rectangular panorama+3 independent
sub images, both the sub images and the sub box in
the expanded rectangular panorama support zoom
and movement, expanded rectangular panorama
supports up and down movement and changes vertical
angle of view.
1P+4
180° expanded rectangular panorama+4 independent
sub images, both the sub images and the sub box in
the expanded rectangular panorama support zoom
and movement, expanded rectangular panorama
supports up and down movement and changes vertical
angle of view.
1P+8
180° expanded rectangular panorama+8 independent
sub images, both the sub images and the sub box in
the expanded rectangular panorama support zoom
and movement, expanded rectangular panorama
supports up and down movement and changes vertical
angle of view.
Figure 2-9
Enable the trigger track on the interface of tripwire or intrusion, and draw the rule of tripwire or intrusion,
the scene of trigger track window will change according to the moving object when it triggers rule alarm
until the moving object disappears from the view range of the camera. Please refer to “5.3.4 IVS” for
more details about the rules drawing and parameter config of tripwire and intrusion.
Trigger track includes three modes which are 1P, 1P+3 and 1P+5.
Dahua Network Camera Web 3.0 Operation Manual
14
1P: Original picture
1P+3: Original picture and three trigger track windows, it can adjust the location and size of
three trigger track windows on the original picture.
1P+5: Original picture and five trigger track windows, it can adjust the location and size of
five trigger track windows on the original picture.
Dahua Network Camera Web 3.0 Operation Manual
15
3 PTZ Control
Here you can view direction keys, speed, zoom, focus, iris, preset, tour, scan, pattern, aux on, off and
PTZ setup button. See Figure 3-1.
Note:
Before PTZ operation, please make sure you have properly set PTZ protocol. (Please refer to Ch 5.5.3).
Currently only IPC-HFXXXX series and –PT series products can support PTZ function.
Parameter
Note
PTZ direction
PTZ supports eight directions: left/right/up/down/upper left/upper
right/bottom left/bottom right.
Speed
It controls rotation speed. The longer the step length, the higher the speed.
Step length control PTZ, zoom, focus and iris.
Quick Position
Use mouse to draw a box in monitoring video, PTZ will rotate and focus to
quickly positioning.
Figure 3-1
Dahua Network Camera Web 3.0 Operation Manual
16
Figure 3-2
PTZ setting interface is shown as in Figure 3-3.
Here you can set scan, preset, tour, pattern, assistant function and light and wiper plus view coordinate.
Figure 3-3
3.1 Scan
Scan interface is shown in Figure 3-4.
Dahua Network Camera Web 3.0 Operation Manual
17
Figure 3-4
Steps to scan are:
Step 1. Click on Set button, display icon.
Step 2. Move via direction key to select left, click on Set Left to set left border of camera
Step 3. Move via direction key to select right, click on Set Right to set right border of camera.
Step 4. Complete scan path setup.
3.2 Preset
Preset interface is shown in Figure 3-5.
Figure 3-5
Steps to preset are:
Step 1. In preset box, input preset value.
Step 2. Click on Go to, camera rotates to preset position.
Step 3. Use direction key to rotate camera, and in preset box input preset value.
Step 4. Click on Add to add a preset. Range of preset relates to PTZ protocol.
3.3 Tour
Tour interface is shown in Figure 3-6.
Dahua Network Camera Web 3.0 Operation Manual
18
Figure 3-6
Steps to tour are:
Step 1. In tour box, input tour path value.
Step 2. Click on Add. Range of tour relates to PTZ protocol.
Step 3. In preset box, input preset value.
Step 4. Click on Add as to add a preset in this tour. If click on Del, it deletes this preset in tour.
Note:
You can add more than one preset here, or delete more than one preset.
3.4 Pattern
Pattern interface is shown in Figure 3-7.
Figure 3-7
Steps to set pattern are shown as follows:
Step 1
Input pattern serial number value in the box, click “Add” and it will display “Start Rec” and “Stop Rec”.
Step 2
Click “Start Rec” to implement a series of operations such as zoom, focus, iris, direction and so on.
Step 3
Click “Stop Rec” to complete the setting of a pattern path.
Step 4
Dahua Network Camera Web 3.0 Operation Manual
19
Click “Start” and it will start pattern according to the pattern spot which has been set; click “Stop” and
the pattern ends.
3.5 Assistant
Assistant interface is shown in Figure 3-8.
Figure 3-8
Steps to assistant are:
Step 1. In assistant box input assistant value.
Step 2. Click on Aux On to turn on aux function.
Click on Aux off to turn off aux function.
3.6 Light Wiper
Light wiper interface is shown in Figure 3-9.
Figure 3-9
Steps to light wiper are:
Click on Enable to enable light wiper function.
Click on Disable to disable light wiper function.
Dahua Network Camera Web 3.0 Operation Manual
20
4 Playback
Web client playback supports video playback and picture playback.
Note:
Before playback, user shall set storage management as in Ch. 5.4.
4.1 Playback
The playback interface is shown as in Figure 4-1.
Figure 4-1
There are four sections:
Section 1: Function of play
Section 2: Playback file
Section 3: Play time cut
Section 4: Record type
Section 5: Progress bar
Section 6: Assistant function
2
3
4
1
6
5
Dahua Network Camera Web 3.0 Operation Manual
21
4.1.1 Function of Play
The function of play is shown as in Figure 4-2 and Figure 4-3.
Figure 4-2
Figure 4-3
Parameter
Function
① Play
When you see this button, it means pause or not played record. Click on this
button, switch to normal play status.
② Stop
Click this button to stop playing.
③ Play by frame
Click on this button to go to next frame.
Note:
You shall pause record when you use this function.
④ Slow
Click on this button to play slowly.
⑤ Quick
Click on this button to play quickly.
⑥ Silent
When this button displays, it means audio is silent. Click on this button to
switch back to normal.
⑦ Volume
Click on left mouse to adjust volume.
⑧ -1 Fisheye
Click this button and fisheye device can adjust display mode according to
different installation mode during the process of playback.
⑧ -2 Rule Info
Click the button and it will playback and display intelligent rules and object
detection box if the video is equipped with intelligent rule info after the
function is enabled, it is off by default.
Dahua Network Camera Web 3.0 Operation Manual
22
4.1.2 Playback File
In calendar, blue date represents data currently has video record or snapshot. See Figure 4-4.
Figure 4-4
Parameter
Function
File Type
Select “dav”, as video playback.
Select “jpg” as picture playback.
Data Source
Default is SD card.
Step 1. Click on data in blue, time axis displays record file progress bar in color. While, green represents
normal record, yellow represents motion detect record, red represents alarm record, and blue
represents manual record.
Step 2. Click on certain time on progress bar, playback starts from this time. See Figure 4-5.
Figure 4-5
Step 3. Click on file list , select date file will be displayed in list.
Step 4. Double click on file in list, playback this file and display file size, start time and end time.
See Figure 4-6..
Dahua Network Camera Web 3.0 Operation Manual
23
Figure 4-6
Parameter
Function
Search
It means records within searched start time and end time on the date.
Download
Format
There are two formats: dav, mp4.
Dahua Network Camera Web 3.0 Operation Manual
24
Parameter
Function
Download
click the download button and download file to path in Ch. 5.1.2.5.
System does not support download and playback at the same time.
Back
Click on back button to go to calendar interface.
4.1.3 Playback Cut
Note:
Playback cut function will automatically pause playing record as playback cut and playback cannot be at
the same time.
Step 1. Click on start time to cut on time axis. This time must be within progress bar range.
Step 2. Move mouse to cut icon . You will be ask to select start time. Click on cur icon as
finish cutting.
Step 3. Click on playback cut end time on time axis. This time must be within progress bar range.
Step 4. Move mouse to cut icon you will be asked to select end time. Click on cut icon as
finish cutting.
Step 5. Click on Save button to save file cut to path in Ch 5.1.2.5. See Figure 4-7.
Figure 4-7
4.1.4 Record Type
After checking record file type, only selected file will be displayed in progress bar and file list. Users can
also select the record type to be displayed via the dropdown box which is above the file list. See Figure
4-8.
Figure 4-8
4.1.5 Progress Bar
Dahua Network Camera Web 3.0 Operation Manual
25
Figure 4-9
Parameter
Function
24 hours
Click on it, means video in past 24 hours.
2 hours
Click on it, means video in past 2 hours.
1 hour
Click on it, means video in past 1 hour.
30 min
Click on it, means video in past 30 min.
4.1.6 Assistant Function
Video playback assistant function is shown in Figure 4-10.
Figure 4-10
Parameter
Function
Digital Zoom
Click on it, video in playback status if is in original size, user can
zoom in any area, If it is not in its original size, Right mouse click to
restore its original size.
Click on this button, you can scroll to zoom in.
Snapshot
Click on this button, you can snapshot video under playback status.
Snapshot will be saved to path in Ch. 5.1.2.5.
4.2 Picture Playback
Web client picture playback interface has the following three functions:
Parameter
Function
1
Play function bar
2
Playback file bar
3
Snapshot type bar
Dahua Network Camera Web 3.0 Operation Manual
26
See Figure 4-11.
Figure 4-11
4.2.1 Play
Figure 4-12
Default icon is and it means pause or not played picture. Click on play button to switch to
normal play status. Icon become
Click on it to pause.
4.2.2 Playback File
Dahua Network Camera Web 3.0 Operation Manual
27
Figure 4-13
Step 1. Click on file list , select snapshot file of the date.
Step 2. Double click on file in list, to play this snapshot.
Parameter
Function
Search
It means all snapshot files within the start time and end time of selected date.
Dahua Network Camera Web 3.0 Operation Manual
28
Parameter
Function
Download
Click the download button to open snapshot file or directly download to local
according to the browser types.
Back
Click the back button to return to calendar interface and re-select time.
Figure 4-14
4.2.3 Snapshot Type
Dahua Network Camera Web 3.0 Operation Manual
29
After checking snapshot file type, in file list only display file of selected type. Users can also select the
snapshot type to be displayed via the dropdown box above the file list. See Figure 4-15.
Figure 4-15
Dahua Network Camera Web 3.0 Operation Manual
30
5 Setup
Web client setup support camera, network, time, storage, system and system info view.
5.1 Camera
The camera setting includes conditions, profile management, zoom and focus.
5.1.1 Conditions
Note:
The camera parameter may be different according to different models, please refer to the actual product
for more details.
5.1.1.1 Picture
Note:
The device which supports true WDR fails to support long exposure when true WDR is enabled.
Step 1
Select “Setup > Camera > Conditions > Picture” and the system will display the “Picture” image which is
shown in Figure 5-1.
Figure 5-1
Step 2
Set picture parameters; please refer to the following sheet for more details about parameter setting.
Parameter
Note
Style
It is to set the picture style, which includes standard, soft and vivid.
Dahua Network Camera Web 3.0 Operation Manual
31
Parameter
Note
Brightness
It is to adjust the image overall brightness via linear adjustment mode.
The larger the number is, the brighter the picture is, and on the contrary it
is opposite. The picture get blurry easily when the value is set too big.
Contrast
It is to adjust the picture contrast. The bigger the value is, the bigger the
bright contrast becomes, and on the contrary it is smaller. The dark area
becomes darker and the bright area becomes overexposed easily when
the value is set too big. The picture becomes blurry when the value is set
too small.
Saturation
It is to adjust the color darkness and lightness. The color becomes darker
when the value is bigger; on the contrary it becomes lighter. The value
causes no influence to the overall brightness of the image.
Sharpness
It is to adjust the sharpness level of the picture edge. The bigger the
sharpness value is, the more obvious the image edge becomes, the image
is likely to generate noise more easily when the value is set too big.
Gamma
It is to change image brightness and improve the dynamic display range of
the image via nonlinear adjustment mode. The bigger the value is, the
brighter the picture becomes, and on the contrary it is opposite.
Mirror
After mirror is enabled, the monitoring image will be displayed invertedly.
Flip
It is to change the display direction of the monitoring image.
It includes following options:
Normal: The monitoring picture is normally displayed.
Flip mode 1: The monitoring picture is displayed with clockwise
rotation 90°
Flip mode 2: The monitoring picture is displayed with anticlockwise
rotation 90°
180°: The monitoring picture is displayed upside down.
Note:
Please set the video resolution as 1080P or lower when applying flip mode
for some devices.
EIS
It can realize electronic anti-flicker function via comparison algorithm of
image difference, which can effectively solve the problem of image jittering
during application and it can make the image clearer.
Step 3
Click “Save” and complete the image parameter config of the camera.
Dahua Network Camera Web 3.0 Operation Manual
32
5.1.1.2 Exposure
Step 1
Select “Setup > Camera > Conditions > Exposure”. The system will display the “Exposure” interface
which is shown in Figure 5-2.
Figure 5-2
Step 2
It is to set the exposure parameter, please refer to the following sheet for more details.
Parameter
Note
Anti-flicker
You can switch to exposure mode when it is in outdoor
mode, it can realize the result in the corresponding exposure
mode.
50Hz: When the current is 50Hz, system can auto adjust the
exposure according to the environment brightness in case
there is any stripe.
60Hz: When the current is 60Hz, system can auto adjust the
exposure according to the environment brightness in case
there is any stripe.
Dahua Network Camera Web 3.0 Operation Manual
33
Parameter
Note
Mode
It is the camera exposure mode.
Note:
When “Anti-flicker” is “Outdor”, the “exposure mode” can be
set as “gain priority” or “shutter priority” mode.
Different devices have different exposure modes; please
refer to the actual interface.
It includes the following options:
Auto: It can auto adjust the image brightness according to
the environment.
Gain priority: The device can auto adjust according to the
gain range which is set by priority during normal exposure
range according to the different scene brightness. The device
will auto adjust shutter value if the image brightness fails to
reach the effect and the gain value has reached to upper limit
or lower limit, which is to make the image reach the best
brightness.
Shutter priority: The device can auto adjust according to the
shutter range which is set by priority during normal exposure
range according to the different scene brightness. The device
will auto adjust shutter value if the image brightness fails to
reach the effect and the shutter value has reached to upper
limit or lower limit, which is to make the image reach the best
brightness.
Iris priority: Iris value is fixed, the device can auto adjust the
shutter value if the image brightness fails to reach effect and
the shutter value has reached the upper limit or lower limit,
the device can auto adjust the gain value to make the image
reach the best brightness.
Manual: It is to manually set gain value and shutter value,
adjust the the displayed brightness of the image.
Auto Iris
It can set the parameter when the camera installs auto iris.
The lens iris can auto adjust the size according to the
environment after auto iris is enabled, then the image
brightness will change accordingly.
The iris value reaches the max when disabling auto iris, the
lens iris will not change according to the environment
brightness.
3D NR
It is to process the image with multiframe (at least two frames), it
can realize noise reduction of the image by using the interframe
information between the previous and latter frame.
Grade
It can set the parameter when “3D NR” is enabled.
The bigger the grade is, the better NR effect it can realize.
Dahua Network Camera Web 3.0 Operation Manual
34
Step 3
Click “Save” to complete the parameter config of camera exposure.
5.1.1.3 Backlight
Backlight mode can be divided into BLC, WDR and HLS.
BLC: it can avoid cucoloris phenomenon of the darker area in the backlight environment.
WDR: It can suppress the overbright area and compensate darker area by enabling WDR, which can
make the overall image clear.
HLC: It is to weaken the high light, which can be applied in the areas such as toll gate, entrance and exit
of the parking lot and etc. As for extreme light, it can snapshot the human face in the dark environment
and it can realize better effect for the details of the plate number.
Step 1
Select “Setup > Camera > Condition > Backlight”, the system will display the interface of “Backlight”
which is shown in Figure 5-3.
Figure 5-3
Step 2
Set the backlight parameter.
When the “Mode” is set as “Scene Self-adaptation”, the system will auto adjust the image
brightness according to the environmental brightness, which is to make the object display clearly in
the scene.
When the “Mode” is set as “BLC”, it can select default mode or customized mode.
When selecting “Default” mode, the system can realize auto exposure according to the
environment, which is to make the image in the darkest area clear to be seen.
Dahua Network Camera Web 3.0 Operation Manual
35
When selecting “Customized” mode, the system can realize exposure upon the selected area
after it set customized area, which is to make the image of the selected area reach
appropriate brightness.
When the “Mode” is set as “WDR”, it will lower the brightness of the area with high brightness and
enhance the brightness of the area with low brightness, which is to make the objects in both high
brightness and low brightness area display clearly.
Note:
There may be video loss of a few seconds when the camera is switched from non WDR mode to WDR
mode.
When the “Mode” is set as “HLC”, the system will constrain the brightness of the area with high
brightness and decrease the size of the halo area, which is to lower the brightness of the whole
image.
Step 3
Click “Save” to complete the config of the backlight mode.
5.1.1.4 WB
WB is used to restore the white object in the scene by the camera, after WB mode is set, it can make
the white object look white in different environments.
Step 1
Select “Setup > Camera > Conditions > WB”, the system will display the interface of “WB”, which is
shown in Figure 5-4.
Figure 5-4
Step 2
Set WB mode.
Dahua Network Camera Web 3.0 Operation Manual
36
When the “Mode” is set as “Auto”, the system can auto compensate white balance upon different
color temperatures, which is to make the image color normal.
When the “Mode” is set as “Natural”, the system can auto compensate white balance to the scene
without artificial light, which is to make the image color normal.
When the “Mode” is set as “Street Lamp”, the system can auto compensate white balance to the
outdoor scene at night, which is to make the image color normal.
When the “Mode” is set as “Outdoor”, the system can auto compensate white balance to the most
outdoor scenes with natural light and artificial light, which is to make the image color normal.
When the “Mode” is set as “Manual”, it can manually set the value of red gain and blue gain; the
system can compensate the different color temperatures in the environment according to the
settings.
When the “Mode” is set as “Regional Custom”, it is to set customized area, the system can
compensate white balance to different color temperature of the images in the area, which is to
make the image color normal.
Step 3
Click “Save” to complete the config of WB mode.
5.1.1.5 Day & Night
It is to set the switch between color mode and black & white mode.
Step 1
Select “Setup > Camera > Conditions > Day & Night” and the system will display the interface of “Day &
Night”, which is shown in Figure 5-5.
Figure 5-5
Dahua Network Camera Web 3.0 Operation Manual
37
Step 2
Set day & night parameter; please refer to the following sheet for more details.
Parameter
Note
Mode
It is to set the camera image displayed as color or black & white mode.
Note:
The setting of “Day/Night Mode” is not affected by the setting of “Profile
Management”.
It includes the following options:
Color: The camera image is displayed as color image.
Auto: The camera can auto select color image or black & white image
to be displayed according to the environmental brightness.
Black & white: The camera image is displayed as black & white image.
Sensitivity
The parameter can be set when the “Day/Night Mode” is “Auto”.
It is to set the sensitivity of the switch between image color display and
black & white display.
Delay
The parameter can be set when the “Day/Night Mode” is “Auto”.
It is to set the switch delay between image color display and white & black
display. The smaller the delay is, the faster of the switch becomes between
color display and black & white display.
Step 3
Click “Save” to complete the config of day/night mode.
5.1.1.6 Defog
The image quality will become weak when the device is in the environment with fog or haze, you can
enable defog function to adjust the image definition.
Step 1
Select “Setup > Camera > Conditions > Defog” and the system will display the interface of “Defog”
which is shown in Figure 5-6.
Dahua Network Camera Web 3.0 Operation Manual
38
Figure 5-6
Step 2
It is to set defog mode according to the actual scene.
When the “Mode” is set as “Manual”, it is to manually set intensity and air light mode, the system
will adjust the image definition according to the intensity and air light mode which have been set
previously. As for air light mode, you can set manual or auto.
When the “Mode” is set as “Auto”, the system will auto adjust the image definition according to the
actual scene.
When the “Mode” is set as “Off”, then the defog function is disabled.
Step 3
Click “Save” to complete the config of defog mode.
5.1.1.7 IR Light
You can directly set the mode of IR light if the device is equipped with IR light.
Step 1
Select “Setup > Camera > Conditions > IR Light” and the system will display the interface of “IR Light”
which is shown in Figure 5-7.
Dahua Network Camera Web 3.0 Operation Manual
39
Figure 5-7
Step 2
It is to set IR light mode according to the actual scene.
When the “Mode” is set as “Manual”, it can manually set the brightness of IR light; the system will
realize light compensation to the image according to the IR light intensity.
When the “Mode” is set as “Smart IR”, the system can adjust the light brightness according to the
actual scene.
When the “Mode” is set as “Zoomprio”, the system can auto adjust the IR light according to the
brightness change of the actual scene.
The system will enable near light by priority when the actual scene becomes dark, the system
will enable the far light when the near light fails to meet the requirement of scene brightness
even if it is adjusted to the brightest.
The system will adjust far light brightness by priority to off and then adjust the brightness of
near light when the actual scene becomes bright. The system will always disable far light
when the focal length of the lens is adjusted to a certain wide angle, which is to avoid near
overexposure. Meanwhile, it can manually set light compensation to slightly adjust the
brightness of IR light.
When the “mode” is set as “Off”, it will not enable the IR light.
Step 3
Click “Save” and complete the config of IR light.
Dahua Network Camera Web 3.0 Operation Manual
40
5.1.1.8 Profile Management
Step 1
Select “Setup > Camera > Conditions > Profile Management” and the system will display the interface of
“Profile Management”.
Step 2
Set profile management.
When the “Profile Management” is set as “Normal”, the system will monitor according to the normal
config.
Figure 5-8
When the “Profile Management” is set as “Full Time”, you can select “Always Enable” in “Day” or
“Night’, the system will monitor according to the config of “always enable”.
Figure 5-9
When the “Profile Management” is set as “Schedule”, you can set some period as day and another
period as night, for example, if it sets 0:00~12:00 as day, 12:00~24:00 as night, then the system will
monitor by adopting corresponding config in different periods.
Dahua Network Camera Web 3.0 Operation Manual
41
Figure 5-10
Step 3
Click “Save” to complete the settings of profile management.
Note:
Click “Default” to restore the device to default config; click “Refresh” to check the latest config file of the
device.
5.1.1.9 Zoom and Focus
Note:
Only motorized vari-focal devices support focus and zoom function.
Step 1
Select “Setup > Camera > Conditions > Zoom and Focus” and the system will display the interface of
“Zoom and Focus” which is shown in Figure 5-11.
Figure 5-11
Dahua Network Camera Web 3.0 Operation Manual
42
Step 2
Adjust the focal length of the lens.
After it is zoomed, set “Speed” and press “+”, “-“or drag the sliding block directly to adjust.
Step 3
Adjust the lens definition.
After it is focused, set “Speed” and press “+”, “-“or drag the sliding block directly to adjust.
Note:
Speed is used to set the length by pressing “+” and “-“.
After adjusting the focal length of the lens or click “Auto Focus”, the device will auto adjust the
image definition, it is not allowed to implement other lens operation during auto focus.
After several times of zoom and focus, the image fails to be adjusted clear, click “Restore All’ to
reset the lens to zero and remove the accumulative error of the lens.
Click “Refresh” and the device will automatically synchronize the hardware to the location of sliding
block of lens zoom and focus.
5.1.2 Video
5.1.2.1 Video
Step 1
Select “Setup > Camera > Video > Video” and the system will display the interface of “Video” which is
shown in Figure 5-12 or Figure 5-13.
Figure 5-12 (Non fisheye)
Dahua Network Camera Web 3.0 Operation Manual
43
Figure 5-13 (Fisheye)
Step 2
Set video bit stream, please refer to the following sheet for more details about the parameters.
Parameter
Function
Installation Mode
It will display the parameter when the device is fisheye.
There are three installation modes for fisheye which are
ceiling, wall mount and ground installation, please
select installation mode according to the actual
installation scene of the fisheye.
The system will begin to switch after switching
installation mode, it will prompt successfully saved after
it is switched successfully.
Note:
The device end will output the dewarped video stream
after configuring installation and record mode, when the
device is accessed to third-party platform, it will directly
display the dewarped image on the third-party platform.
Dahua Network Camera Web 3.0 Operation Manual
44
Parameter
Function
Record Mode
It will display the parameter when the device is fisheye.
The system will begin to switch after record mode is
switched, it will prompt saved successfully after it is
switched successfully.
The record mode will change according to the different
installation modes.
1O: the original picture which is not dewarped.
1P: 360°rectangular panorama.
2P: The mode can be set when the “Installation
Mode” is set as “Ceiling” or “Ground”. It is the 2
related 180°rectangular image, the two
subwindows can both form 360°panorama
anytime.
1O+3R: original image + 3 independent sub
images, both the sub image and sub boxes in the
original image can support zoom and movement.
1R: Original image + independent sub image, the
sub boxes of the original image support zoom and
movement.
4R: original image + 4 independent sub images,
both the sub image and sub boxes in the original
image support zoom and movement.
2R: Original image + 2 independent sub images,
the sub boxes of the original image can support
zoom and movement, the sub image supports up
and down movement, which can change the
vertical angle of view.
Note:
The device end will output dewarped video stream after
configuring installation and record mode, when the
device is accessed to the third-party platform, it will
directly display the dewarped image on the third-party
platform.
Sub Stream Enable
Select “Enable” to enable sub stream.
The device supports enabling sub stream 1 and sub
stream 2 at the same time.
Smart Codec
It can enhance image compression performance and
reduce storage space by enabling intelligent encoding.
Note:
After intelligent encoding is enabled, the device will not
support third stream, ROI or intelligent event detection,
please refer to the actual interface for more details.
Dahua Network Camera Web 3.0 Operation Manual
45
Parameter
Function
Encode mode
There are five options: H.264 (main profile standard,
H.264H (high profile standard), H.264B (Baseline
Profile), H.265 (main profile standard) and MJPEG
encode.
The H.264, H.264H both are H264 bit stream.
H.264 is the Main Profile encode and you need to
enable the sub stream function in your camera and
set the resolution as CIF. Then you can monitor via
the Blackberry cell phone.
The H.265 is the main profile encode mode.
MJPEG: In this encode mode, the video needs to
large bit stream to guarantee the video definition.
You can use the max bit stream value in the
recommend bit to get the better video output effect.
Resolution
There are multiple resolutions. You can select from the
dropdown list.
For each resolution, the recommended bit stream value
is different.
Note: When video is under rotating status, you cannot
set resolution higher than 1080P (excluding 1080P).
Video Clip
The function is only supported by sub stream 2, please
refer to “Video Clip” for more details below the sheet.
Frame Rate (FPS)
PAL: 1～25f/s，1-50f/s NTSC: 1～30f/s or 1~60f/s.
The frame rate may vary due to different resolutions.
Bit Rate Type
There are two options: VBR and CBR.
Please note, you can set video quality in VBR mode.
Under MJPEG mode, only CBR is available.
Recommended Bit
Recommended bit rate value according to the resolution
and frame rate you have set.
Bit Rate
In CBR, the bit rate here is the max value. In
dynamic video, system needs to low frame rate or
video quality to guarantee the value.
The value is null in VBR mode.
Please refer to recommend bit rate for the detailed
information.
SVC
Frame rate can be encoded by layer. It is a flexible
encoding method. By default, it is 1 as 1 layer. You also
can set 2/3/4 layers.
I Frame
Here you can set the P frame amount between two I
frames. The value ranges from 1 to 150. Default value
is 50.
Recommended value is frame rate *2.
Dahua Network Camera Web 3.0 Operation Manual
46
Parameter
Function
Watermark Settings
Select “Watermark Setting” and enable watermark
function. After the watermark function is enabled, you
can check if the video is tampered via verifying
watermark character.
Watermark Character
It is the character of watermark verification, it is
DigitalCCTV by default.
Video Clip
1. Select “Sub Stream 2” in the drop-down box, click “Enable”.
2. Enable “Video Clip”, click .
The system will display the interface of “Area”, which is shown in Figure 5-14.
Figure 5-14
Dahua Network Camera Web 3.0 Operation Manual
47
3. Select the needed resolution and clip the needed image on the interface, which is shown in Figure
5-15.
4. Click “Save”. You can check the clipped video in the preview interface (the sub stream 2 preview
interface only displays the clipped area), which is shown in Figure 5-15.
Figure 5-15
Step 3
Click “Save” to complete video stream setup.
5.1.2.2 Snapshot
The snapshot interface is shown as in Figure 5-16.
Figure 5-16
Dahua Network Camera Web 3.0 Operation Manual
48
Please refer to the following sheet for detailed information.
Parameter
Function
Snapshot type
There are two modes: general (schedule) and Event (activation).
Image size
It is the same as the resolution of main stream.
Quality
It is to set the image quality. There are six levels.
Interval
It is to set snapshot frequency. Optional1~7s/picture, customized.
5.1.2.3 Video Overlay
The video overlay interface is shown as in Figure 5-17.
Figure 5-17
Dahua Network Camera Web 3.0 Operation Manual
49
Figure 5-18
Figure 5-19
Dahua Network Camera Web 3.0 Operation Manual
50
Figure 5-20
Figure 5-21
Dahua Network Camera Web 3.0 Operation Manual
51
Figure 5-22
Please refer to the following sheet for detailed information.
Parameter
Function
Privacy Masking
Here you can privacy mask the specified video in the
monitor video.
System max supports 4 privacy mask zones.
Time Title
You can enable this function so that system overlays time
information in video window.
You can use the mouse to drag the time tile position.
Channel Title
You can enable this function so that system overlays
channel information in video window.
You can use the mouse to drag the channel tile position.
Text Overlay
You can enable this function to overlay text in video
window.
Private protocol is connected to mobile NVR, support GPS
information overlay.
You can use the mouse to drag location box to adjust its
position. Alignment include align left and align right.
Picture Overlay
You can enable this function to display overlay picture.
Click on disable to turn it off.
Click on Upload Picture to overlay local picture into
monitoring window. You can drag the yellow box to move
it.
Note:
You cannot enable text and picture overlay at the same time.
Dahua Network Camera Web 3.0 Operation Manual
52
Counting
Check “Enable” to display the counting statistics data in
the video monitoring window; check “Disable” not to
display.
There are enter number and leave number for statistics
type and left align and right align for OSD info.
Refresh
Set privacy mask, channel title, time title, location, overlay
and save the change. You can click on Refresh to see
effect.
Default
Click it to restore default config.
Save
Click it to complete video settings.
5.1.2.4 ROI
Note: Some series don’t support ROI setup function.
Figure 5-23
Dahua Network Camera Web 3.0 Operation Manual
53
Figure 5-24
Parameters
Note
Enable
Check “Enable”, then it will display the ROI in the video monitoring window;
Check “Disable”, then it won’t display.
Image
Quality
Set the image quality of ROI, ranging from 1～6, default is 6.
Note:
For fisheye device, it ranges from 1~6 (best), default is 6 (best)
Able to set area block, max 4 areas.
5.1.2.5 Path
The storage path interface is shown as in Figure 5-25.
Here you can set snap image saved path and the record storage path.
The default monitor image path is C:\Users\admin\WebDownload\LiveSnapshot.
The default monitor record path is C:\Users\admin\WebDownload\LiveRecord.
The default playback snapshot path is C:\Users\admin\WebDownload\PlaybackSnapshot.
The default playback download path is C:\Users\admin\WebDownload\PlaybackRecord.
The default playback cut path is: C:\Users\admin\WebDownload\VideoClips.
Note:
Admin is locally logged in PC account.
Please click the Save button to save current setup.
Dahua Network Camera Web 3.0 Operation Manual
54
Figure 5-25
5.1.3 Audio
Please note some series devices do not support audio function.
5.1.3.1 Audio
The audio interface is shown as below. See Figure 5-26.
Figure 5-26
Please refer to the following sheet for detailed information.
Dahua Network Camera Web 3.0 Operation Manual
55
Parameter
Function
Enable
You can enable audio only when video is enabled.
After selecting the “Enable” of main stream or sub stream, the
network transmission stream is the audio/video composite
stream, otherwise it only includes video image.
Encode mode
The encode mode of the main stream and extra stream include
G.711A, G.711Mu, G.726 and ACC. The default mode is
G.711A.
The setup here is for audio encode mode and the bidirectional
talk encode both.
Sampling
Frequency
The sampling frequency of audio. It includes the following
options:
8K
16K
32K
48K
64K
AudioIn Type
Two modes to select: LineIn, Mic.
Device needs to connect external audio input source under
LineIn mode, and it doesn’t need to connect external audio
input source under Mic mode.
Noise Filter
Enable the function and it can filter relevant noise.
Microphone
Volume
Adjust microphone volume from 0～100.
Note:
Supported by some devices.
Speaker Volume
Adjust speaker volume from 0～100.
Note:
Supported by some devices.
5.1.3.2 Alarm audio
Dahua Network Camera Web 3.0 Operation Manual
56
Figure 5-27
Figure 5-28
Audio management currently supports PCM format to record and PCM, wav two forms to upload，
and can select an audio file for the audio alarm linkage.
The way to download the web alarm playback audio file into local is as follows:
Step 1 Use the left mouse button to click the hollow circle in the “choice” column on the left,
and shows ，which means effective choice of alarm audio.
Step 2 Use the right mouse button to click ，select “save target as” to download.
5.2 Network
5.2.1 TCP/IP
The TCP/IP interface is shown as in Figure 5-29. It supports IPv4 and IPv6. IPv4 supports static IP and
DHCP. IPv6 supports static IP only. When users manually modify IP address, WEB will automatically
jump to the new IP address.
Dahua Network Camera Web 3.0 Operation Manual
57
Figure 5-29
Please refer to the following sheet for detailed information.
Parameter
Function
Host Name
It is to set current host device name. It max supports 15
characters.
Ethernet Card
Please select the Ethernet port. Default is wired.
Please note you can modify the default Ethernet card if there is
more than one card.
Mode
There are two modes: static mode and the DHCP mode. Select
DHCP mode, it auto searches IP, and you cannot set IP/subnet
mask/gateway. Select static mode, you must manually set
IP/subnet mask/gateway.
Mac Address
It is to display hose Mac address.
IP Version
It is to select IP version. IPV4 or IPV6.
You can access the IP address of these two versions.
IP Address
Please use the keyboard to input the corresponding number to
modify the IP address and then set the corresponding subnet
mask and the default gateway.
Preferred DNS
DNS IP address.
Alternate DNS
Alternate DNS IP address.
Dahua Network Camera Web 3.0 Operation Manual
58
Enable
ARP/Ping set
device IP
address service.
You can use ARP/Ping command to modify or set the device IP
address if you know the device MAC address.
Before the operation, please make sure the network camera
and the PC in the same LAN. This function is on by default.
You can refer to the steps listed below.
Step 1: Get an IP address. Set the network camera and the PC
in the same LAN.
Step 2: Get the physical address from the label of the network
camera.
Step 3: Go to the Run interface and then input the following
commands.
arp –s <IP Address> <MAC>
ping –l 480 –t <IP Address>
Such as：arp -s 192.168.0.125 11-40-8c-18-10-11
ping -l 480 -t 192.168.0.125
Step 4: Reboot the device.
Step 5: You can see the setup is OK if you can see there are
output information such as “Reply from 192.168.0.125 …” from
the command output lines. Now you can close the command
line.
Step 6: Open the browse and then input http://<IP address>.
Click the Enter button, you can access now.
5.2.1.1 Easy4ip
Click “Enable” to connect the device to network, and then you can connect to the device via mobile
client of Easy4ip after “Online” is displayed on the interface (connection mode: add device serial number
or scan QR code). See Figure 5-30.
Figure 5-30
Dahua Network Camera Web 3.0 Operation Manual
59
5.2.2 Connection
5.2.2.1 Connection
The connection interface is shown as in Figure 5-31.
Figure 5-31
Please refer to the following sheet for detailed information.
Parameter
Function
Max
connection
It is the max Web connection for the same device. The value ranges from 1
to 20. Default connection amount is 10.
TCP port
Port range is 1025~65534. The default value is 37777. You can input the
actual port number if necessary.
UDP port
Port range is 1025~65534. The default value is 37778. You can input the
actual port number if necessary.
HTTP port
Port range is 1025~65524. The default value is 80. You can input the
actual port number if necessary.
Dahua Network Camera Web 3.0 Operation Manual
60
RTSP port
The default value is 554. Please leave blank if use default. User uses
QuickTime or VLC can play the following formats. BlackBerry can play
too.
Real-time monitoring URL format, please require real-time RTSP
media server, require channel no., bit stream type in URL. You may
need username and password.
User uses BlackBerry need to set encode mode to H.264B, resolution
to CIF and turn off audio.
URL format is:
rtsp://username:password@ip:port/cam/realmonitor?channel=1&subtype=0
Username/password/IP and port.
The IP is device IP and the port default value is 554. You can leave it in
blank if it is the default value.
Follow standard RTP protocol and when encode mode is MJPEG, the max
resolution only supports 2040*2040.
HTTPs
Port
HTTPs communication port, range is 1025~65534, default is 443.
Note:
0～1024, 37780～37880, 1900, 3800, 5000, 5050, 9999, 37776, 39999, 42323 are all special ports.
User cannot modify them.
Avoid using default port value of other ports.
5.2.2.2 ONVIF
ONVIF（Open Network Video Interface Forum），this standard describes network video mode,
interface, data type and data interaction mode. ONVIF Standard’s aim is to achieve a network video
frame agreement and makes the network video products (including video front-end, video equipment,
etc.) from different manufacturers completely compatible.
ONVIF function is on by default.
Dahua Network Camera Web 3.0 Operation Manual
61
Figure 5-32
5.2.3 PPPoE
The PPPoE interface is shown as in Figure 5-33.
Enter the PPPoE username and password which are provided by ISP (Internet Service Provider), and
click “Enable”. The network camera will automatically establish network connection in the mode of
PPPoE after it is enabled, after it is successful, the IP of the “IP Address” will be automatically modified
into the dynamic IP address of the acquired WAN.
Note:
After PPPoE dial-up is successful, it needs to log in the device via the IP which is set before dial-up; in
the PPPoE setup interface, it will display the registered IP address, and then it can visit the IP address
via client.
Please disable UPnP when clicking PPPoE enable, which is to avoid causing influence to PPPoE dial-
up.
Dahua Network Camera Web 3.0 Operation Manual
62
Figure 5-33
5.2.4 DDNS
The DDNS interface is shown as in Figure 5-34.
The DDNS is to set to connect the various servers so that you can access the system via the server.
Please go to the corresponding service website to apply a domain name and then access the system
via the domain. It works even your IP address has changed. When the device connects to WLAN, you
should disable UPnP.
Figure 5-34
Please refer to the following sheet for detailed information.
Dahua Network Camera Web 3.0 Operation Manual
63
Parameter
Function
Server Type
You can select DDNS protocol from the dropdown list: CN99
DDNS, NO-IP DDNS, Dyndns DDNS, Dahua DDNS, the default
is Dahua DDNS.
Server Address
DDNS server IP address
CN99 DDNS
Server address: www.3322.org
NO-IP DDNS
Server address: dynupdate.no-ip.com
Dyndns DDNS
Server address: members.dyndns.org
Dahua DDNS
Server address：www.dahuaddns.com
Mode
Default is auto, able to choose manual
Domain Name
Both auto and manual are “MAC addresss.dahuaddns.com”by
default, able to set prefix manually.
Username
The user name you input to log in the server, optional.
The CN99 DDNS interface is shown as in Figure 5-35.
Figure 5-35
Dahua Network Camera Web 3.0 Operation Manual
64
Parameter
Function
Server Type
You can select CN99 DDNS protocol
Server Address
Under CN99 DDNS the default server address is “www.3322.org”
Domain Name
Self-defined domain name
Username
The user name you input to log in the server.
Password
The password you input to log in the server
Refresh Period
The refresh period of the connection between the device IP and the server, default
is 10 minutes.
5.2.5 IP filter
The IP filter interface is shown as in Figure 5-36.
You can enable IP filter function so that some specified IP/MAC user can access the network camera.
You can add IP address or IP segment.
If you do not check the box here, it means there is on access limit.
Here you can add IP address and MAC address. You must add these addresses before enabling the
trusted sites.
Please note: You must set MAC address in the same network segment.
Figure 5-36
5.2.6 SMTP （e-mail)
The SMTP interface is shown as in Figure 5-37.
Dahua Network Camera Web 3.0 Operation Manual
65
Figure 5-37
Please refer to the following sheet for detailed information.
Parameter
Function
SMTP Server
Input server address and then enable this function.
Port
Default value is 25. You can modify it if necessary.
Anonymity
For the server which supports the anonymity email function, it
won’t display the information of the sender.
User Name
The user name of the sender email account.
Password
The password of sender email account.
Sender
Sender email address.
Authentication
(Encryption
mode)
You can select SSL, TLS or none.
Title (Subject)
Input email subject here.
Attachment
System can send out the email of the snapshot picture once
you check the box here.
Mail receiver
Input receiver email address here. Max three addresses.
Dahua Network Camera Web 3.0 Operation Manual
66
Parameter
Function
Interval
The send interval ranges from 0 to 3600 seconds. 0 means
there is no interval.
Please note system will not send out the email immediately
when the alarm occurs. When the alarm, motion detection or
the abnormity event activates the email, system sends out the
email according to the interval you specified here. This
function is very useful when there are too many emails
activated by the abnormity events, which may result in heavy
load for the email server.
Health mail
enable
Please check the box here to enable this function.
Email test
The system will automatically sent out a email once to test the
connection is OK or not .Before the email test, please save
the email setup information.
5.2.7 UPnP
It allows you to establish the mapping relationship between the LAN and the public network.
Here you can also add, modify or remove UPnP item. For UPnP on different routers, you must disable
UPnP function. See Figure 5-38.
In the Windows OS, From Start->Control Panel->Add or remove programs. Click the “Add/Remove
Windows Components” and then select the “Network Services” from the Windows Components Wizard.
Click the Details button and then check the “Internet Gateway Device Discovery and Control client” and
“UPnP User Interface”. Please click OK to begin installation.
Enable UPnP from the Web. If your UPnP is enabled in the Windows OS, the network camera can auto
detect it via the “My Network Places”.
Under manual mode, you can modify external port. Under auto mode, select idle port for auto port
mapping without user modification.
Dahua Network Camera Web 3.0 Operation Manual
67
Figure 5-38
5.2.8 SNMP
The SNMP interface is shown as in Figure 5-39 and Figure 5-40.
The SNMP allows the communication between the network management work station software and the
proxy of the managed device. Please install the software such as MG MibBrowser 8.0c software or
establish the SNMP service before you use this function. You need to reboot the device to activate the
new setup.
Figure 5-39
Please refer to the following sheet for detailed information.
Dahua Network Camera Web 3.0 Operation Manual
68
Parameter
Function
SNMP Version
Check SNMP v1, device only process v1 info.
Check SNMP v2, device only process v2 info.
Check SNMP v3, can set username, password and
encryption method. Server calibrate corresponding
username, password and encryption method too access
device and v1/v2 are unavailable.
SNMP port
The listening port of the proxy program of the device. It is a
UDP port not a TCP port. The value ranges from 1 to 65535.
The default value is 161
Community
It is a string, as command between management and proxy, ,
defining a proxy, and a manager’s authentication.
Read community
Read-only access to all SNMP targets, default is public.
Note: Only number, letter, _, and – supported.
Write community
Read/write access to all SNMP targets, default is private.
Note: Only number, letter, _, and – supported.
Trap address
The destination address of the Trap information from the
proxy program of the device.
Trap Address
Address where to send Trap message.
Trap Port
Port which send Trap message, default is 162, range
1~65535.
Figure 5-40
Dahua Network Camera Web 3.0 Operation Manual
69
Check SNMP v3 version and SNMP port, read community, write community, Trap address, Trap port
are same with SNMP v1 and SNMP v2 versions. Only when SNMP version is SNMP v3, users need to
configure parameter in chart.
Parameter
Function
SNMP Version
SNMP v3
Read-only
Username
Default is public.
Note:
Name only can be number, letter and underline.
Read/Write
Username
Default is private.
Note:
Name only can be number, letter and underline.
Authentication
You may select MD5 or SHA, default is MD5.
Authentication
Password
Password not less than 8 characters.
Encryption
Default is CBC-DES.
Encryption
Password
Password not less than 8 characters.
5.2.9 Bonjour
The Bonjour interface is shown as below. See Figure 5-41.
Bonjour is based on the multicast DNS service from the Apple. The Bonjour device can automatically
broadcast its service information and listen to the service information from other device.
You can use the browse of the Bonjour service in the same LAN to search the network camera device
and then access if you do not know the network camera information such as IP address.
You can view the server name when the network camera is detected by the Bonjour. Please note the
safari browse support this function. Click the “Display All Bookmarks: and open the Bonjour, system can
auto detect the network camera of the Bonjour function in the LAN.
Dahua Network Camera Web 3.0 Operation Manual
70
Figure 5-41
5.2.10 Multicast
The multicast interface is shown as in Figure 5-42.
Multicast is a transmission mode of data packet. When there is multiple-host to receive the same data
packet, multiple-cast is the best option to reduce the broad width and the CPU load. The source host
can just send out one data to transit. This function also depends on the relationship of the group
member and group of the outer.
Note:
Open preview, streaming media protocol, select multicast, and monitor via multicast format.
Here you can set multicast address and port. You also need to go to Live interface to set the
protocol as Multicast.
Figure 5-42
Please refer to the following sheet for detailed information.
5.2.11 4G
Parameter
Function
Enable
Select to enable multicast function. Main stream and sub stream cannot be
used at the same time.
Multicast address
Main/sub stream multicast default address is 224.1.2.4 and its range is
224.0.0.0～239.255.255.255.
Port
Multicast port. Main stream is 40000, sub stream1 is 40016,sub stream2 is
40032 and the range is 1025～65534.
Dahua Network Camera Web 3.0 Operation Manual
71
Note: This function is only for series with 4G module.
4G is a mobile communication system which makes wireless communication integrates with Internet
and multimedia communication.
5.2.11.1 Dialing Setting
Figure 5-43
Parameter
Function
Wireless Net Type
Auto, WCDMA, FDD-LTE optional, you can select according
to the operator.
Enable
Check to enable 4G module.
APN
It shall be acquired from the operator according to the setup
of operator.
Authentication Mode
Auto, PAP and CHAP, the authentication algorithm is
different according to different operators.
Dial-up Number
The number is different according to different operator, it can
be acquired from operator.
User name
It shall be acquired from the operator.
Password
It shall be acquired from the operator.
Update Period
It is the period beyond the dial-up period which has been
set, it is 30s by default, which means the device can auto
acquire 4G dial-up status, cut off dial-up to save flow.
Dahua Network Camera Web 3.0 Operation Manual
72
Time Range
It is the time period to set dial-up. It can activate the function
via message to enable/disable dial-up function if it is
beyond the time period.
IP Address
It will display the acquired IP after the dial-up is successful
via 4G.
5.2.11.2 Mobile Setting
Figure 5-44
Please refer to the following sheet for detailed information.
Parameter
Function
Message Send
In the event, after the corresponding message activation is
enabled, it will send message to the phone of receiver when
event happens. It needs to enable the function of message
activation function in the event interface when using the
function.
Message
Activation
It can send message ON/OFF to the SIM card inside the device by
the mobile phone in the list, which is to enable /disable the dial-up
function and send REBOOT to restart the device.
Phone Activation
You can use the mobile phone in the calling list to call the SIM card
inside the device to enable dial-up function.
5.2.12 WIFI
Dahua Network Camera Web 3.0 Operation Manual
73
Note:
Some series devices don’t support WIFI and WPS function.
WPS function is supported by the devices with WPS button.
5.2.12.1 WIFI
WIFI info can show the name, status, IP information of the Current Hot Spot. Usually please “Refresh”
WIFI work information after reconnection to ensure the real-time display of the work status, because it
often takes some time to connect WIFI Hot Spot, which depends on the network signal strength.
Figure 5-45
WIFI setting method is as follows:
Step 1 Click ，show as ，means enabling WIFI function.
Step 2 Click “ Search SSID”, and shows the wireless network hot spot of the current network camera
environment in the list.
Dahua Network Camera Web 3.0 Operation Manual
74
Figure 5-46
Step 3 Click “Add SSID” when need to add a wireless network manually pop out an interface in
the figure below, and enter network ID in the dialog box.
Figure 5-47
Step 4 Double click on one can pop out the signal intensity and authentication of the hot spot.
· Please enter the password if necessary. Please keep the choice of password index number
same as the router when entering password.
· Please click “connect” if it is unnecessary to enter the password.
5.2.12.2 WPS
Dahua Network Camera Web 3.0 Operation Manual
75
Figure 5-48
PIN Number and SSID are both acquired from the router, please “refresh” the work information of WIFI
to ensure the real-time display of work state after filling in correctly.
5.2.13 802.1x
802.1x (port based network access control protocol) supports manual selection of authentication
method to control if device connected to LAN can join the LAN. It well supports authentication, charging,
safety and management requirement of network.
Figure 5-49
Please refer to the following sheet for detailed information.
Dahua Network Camera Web 3.0 Operation Manual
76
Parameter
Function
Authentication
PEAP (protected EAP protocol).
Username
It needs the username to login, which is authenticated by the
server.
Password
Please input password here.
5.2.14 QoS
The QoS interface is shown as below. See Figure 5-50.
Qos (Quality of Service) is network security mechanism. It is a technology to fix the network delay and
jam problem and etc. For the network service, the quality of service includes the transmission bandwidth,
delay, the packet loss and etc. We can guarantee the transmission bandwidth, lower the delay, and
reduce the loss of the data packet and anti-dither to enhance the quality.
We can set the DSCP (Differentiated Services Code Point) of the IP to distinguish the data packet so
that the router or the hub can provide different services for various data packets. It can select the
different queues according to the priority (64 different priority levels) of the packets and select the
bandwidth of the each queue. Level 0 is the lowest, and level 63 is the highest. It can also discard at the
different ratio when the broad bandwidth is jam.
Figure 5-50
Please refer to the following sheet for detailed information.
Parameter
Function
Real-time
monitor
The value ranges from 0 to 63. The router or the switcher can
provide different service for various data packets.
Dahua Network Camera Web 3.0 Operation Manual
77
Parameter
Function
Command
The value ranges from 0 to 63. The router or the switcher can
provide different service for various data packets.
Enable
Wireless QoS
Check it to enable QoS.
5.2.15 HTTPs
In the HTTPs setting interface, users can make PC log in normally via HTTPs by creating certificate or
uploading signed certificate, which is to guarantee the security of communication data and provide
safeguard for user information and device security with reliable and stable technical means.
Step 1
Create certificate or upload the signed certificate.
Please refer to the following steps if you select “Create Certificate”.
1. Select “Setup > Network > HTTPs”, and the system will display the interface of HTTPs, which is
shown in Figure 5-51.
Figure 5-51
2. Click “Create” and it will pop out the dialog box of “HTTPs”, which is shown in Figure 5-52.
Dahua Network Camera Web 3.0 Operation Manual
78
Figure 5-52
3. Fill in corresponding “Country”, “Province” and some other information, click “Create” after filling in.
It will show the prompt of “Create Successfully”, which means the server certificate has been
successfully created.
Note:
Make sure the “IP or domain name” is the same as that of the device.
4. Click “Install” and it will install the certificate on the device end, which is shown in Figure 5-53.
Dahua Network Camera Web 3.0 Operation Manual
79
Figure 5-53
5. Click “Download”. It will pop out the dialog box of “Save as”, save the file into the computer.
Figure 5-54
Dahua Network Camera Web 3.0 Operation Manual
80
6. Double click the downloaded icon of “RootCert.cer”. The system will display the information
interface of “Certificate”, which is shown in Figure 5-55.
Figure 5-55
7. Click “Install Certificate” and it will pop out the interface of “Certificate Import Wizard”, which is
shown in Figure 5-56.
Dahua Network Camera Web 3.0 Operation Manual
81
Figure 5-56
8. Click “Next”. Select “Trusted Root Certification Authorities”, which is shown in Figure 5-57.
Dahua Network Camera Web 3.0 Operation Manual
82
Figure 5-57
9. Click “Next”. The system will display the interface of “Completing the Certificate Import Wizard”,
which is shown in Figure 5-58.
Dahua Network Camera Web 3.0 Operation Manual
83
Figure 5-58
10. Click “Finish”, and it will pop out the dialog box of “Security Warning”, which is shown in Figure 5-59.
Dahua Network Camera Web 3.0 Operation Manual
84
Figure 5-59
11. Click “Yes”. It will pop out the dialog box of “Import Successful”, click “Ok” to complete downloading
certificate, which is shown in Figure 5-60.
Figure 5-60
Please refer to the following steps if you select “Install Signed Certificate”.
1. Select “Setup > Network > HTTPs”. The system will display the interface of HTTPs, which is shown
in Figure 5-61.
Dahua Network Camera Web 3.0 Operation Manual
85
Figure 5-61
2. Select signed certificate and certificate key path respectively via “Browse”, click “Upload”.
3. Install root certificate, please refer to step 6~11 for more details.
4. Check “Enable HTTPs”, click “Save”. The system will display the dialog box of “Need to reboot the
device”, and then the config is valid.
Figure 5-62
5. Use HTTPs
Use HTTPs to log in.
Enter https://xx.xx.xx.xx in the browser, and it will pop out normal login interface; the browser will prompt
certificate error if the certificate is not installed, which is shown in Figure 5-63.
Dahua Network Camera Web 3.0 Operation Manual
86
Figure 5-63
Note:
“xx.xx.xx.xx” is corresponding to your IP or domain name.
5.3 Event
5.3.1 Video detection
5.3.1.1 Motion Detection
Step 1
Select “Setup > Event > Video Detection > Motion Detection’ and the system will display the interface of
“Motion Detection” which is shown in Figure 5-64.
Dahua Network Camera Web 3.0 Operation Manual
87
Figure 5-64
Step 2
Select “Enable” to enable motion detection function.
Step 3
Set motion detection area.
1. Click “Setup” and the system will pop out the interface of “Setting Area”, which is shown in Figure 5-
65
Dahua Network Camera Web 3.0 Operation Manual
88
Figure 5-65
2. Set area name, it is to set valid area of motion detection according to the actual situation, and it can
set the value of sensitivity and threshold respectively.
The bigger the sensitivity is, the easier it is to generate motion detection, the smaller the threshold is,
the easier it is to generate motion detection; the entire video image is the valid area of motion
detection by default.
Note:
Different colors represent different areas; each area can set different detection area.
The red line in the Oscillogram means triggering motion detection; green line means not triggering
motion detection.
3. Click “Save” to complete area setting.
Step 4
It is to set other parameters of motion detection, please refer to the following sheet for more details.
Dahua Network Camera Web 3.0 Operation Manual
89
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the
period range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the
whole week, then it means the setup can be applied to the whole
week, you can also select the check box in front of the week number
to implement independent setting for some days).
3. Click “Save” to complete the setup of working period.
Anti-dither
System only memorizes one event during the anti-dither period. The value
ranges from 0s to 100s.
Area
1. Click “Setup” and the system will pop out the interface of “Set Area”.
2. Set the area name, it is to set the valid area of motion detection
according to the actual situation, and it can set its sensitivity and
threshold respectively. The higher the sensitivity is, the easier it is to
trigger motion detect, the smaller the area threshold is, the easier it is
to generate motion detect, the whole video image is the valid area of
the motion detect by default.
Note:
Different colors represent different areas; each area can set different
detection areas.
The red line in the Oscillogram means triggering motion detect, the green
line means not triggering motion detect.
3. Click “Save” to complete area setup.
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period in Storage>Schedule and select auto record in record control
interface.
Record Delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended. The
value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Audio linkage
Check it and the system will play alarm audio file when alarm occurs. Users
can set the recorded or uploaded audio file in “camera setting ＞ audio ＞
alarm audio”.
Flash linkage
Check it and the flash will be on when alarm occurs, and the flash will
be off until the end of alarm after corresponding delay.
Dahua Network Camera Web 3.0 Operation Manual
90
Parameter
Function
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Step 5
Click “Save” to complete the setting of motion detection.
5.3.1.2 Video Tampering
Step 1
Select “Setup > Event > Video Detection > Video Tampering” and the system will display the interface of
“Video Tampering” which is shown in Figure 5-66.
Figure 5-66
Step 2
Set the parameter of video tampering; please refer to the following sheet for more details.
Parameter
Function
Enable video
tampering
You need to check the box to enable video mask detection alarm.
Enable defocus
detection
You need to check the box to enable defocus detection alarm.
Dahua Network Camera Web 3.0 Operation Manual
91
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the
period range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the
whole week, then it means the setup can be applied to the whole
week, you can also select the check box in front of the week number
to implement independent setting for some days).
3. Click “Save” to complete the setup of working period.
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period in Storage>Schedule and select auto record in record control
interface.
Record Delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended. The
value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Audio linkage
Check it and the system will play alarm audio file when alarm occurs. Users
can set the recorded or uploaded audio file in “camera setting ＞ audio ＞
alarm audio”.
Flash linkage
Check it and the flash will be on when alarm occurs, and the flash will
be off until the end of alarm after corresponding delay.
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Step 3
Click “Save” to complete the setup of video tampering.
5.3.1.3 Scene Changing
Step 1
Select “Setup > Event > Video Detection > Scene Changing” and the system will display the interface of
“Scene Changing” which is shown in Figure 5-67.
Dahua Network Camera Web 3.0 Operation Manual
92
Figure 5-67
Step 2
Check “Enable” to enable the function of scene changing.
Step 3
It is to set the parameters of scene changing, please refer to the following sheet for more details.
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the
period range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the
whole week, then it means the setup can be applied to the whole
week, you can also select the check box in front of the week number
to implement independent setting for some days).
3. Click “Save” to complete the setup of working period.
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period in Storage>Schedule and select auto record in record control
interface.
Record Delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended. The
value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Dahua Network Camera Web 3.0 Operation Manual
93
Parameter
Function
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Step 4
Click “Save” to complete the setup of scene changing.
5.3.2 Audio Detection
Step 1
Select “Setup > Event > Audio Detection” and the system will display the interface of “Audio Detection”
which is shown in Figure 5-68.
Figure 5-68
Step 2
It is to set the parameters of audio detect, please refer to the following sheet for more details.
Parameter
Function
Enable input
abnormal
Select “Enable Input Abnormal” and it will trigger alarm when it detects
audio input abnormity.
Enable intensity
change
Select “Enable Intensity Change” and it will trigger alarm when it detects
that audio intensity change exceeds the threshold.
Dahua Network Camera Web 3.0 Operation Manual
94
Parameter
Function
Sensitivity
It can be judged as audio abnormity when the input volume change
exceeds continuous environment volume; users need to adjust according
to the actual environment test.
Threshold
It is to set the filtered environment volume intensity, if the environmental
noise is too big, then the value needs to be set higher, users can adjust
according to the actual environment test.
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the
period range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the
whole week, then it means the setup can be applied to the whole
week, you can also select the check box in front of the week number
to implement independent setting for some days).
3. Click “Save” to complete the setup of working period.
Anti-dither
System only memorizes one event during the anti-dither period. The value
ranges from 0s to 100s.
Record
Check it and so when alarm occurs, system will auto record. You shall set
record period in Storage>Schedule and select auto record in record control
interface.
Record Delay
System can delay the record for specified time after alarm ended. The
value ranges from 10s to 300s.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended. The
value ranges from 10s to 300s.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
PTZ
Here you can set PTZ movement when alarm occurs. Such as go to
preset x when there is an alarm.
The event type includes: preset, tour and pattern.
Snapshot
You need to check the box here so that system can backup motion detection
snapshot file. You shall set snapshot period in Storage>Schedule.
Step 3
Click “Save” to complete the setup of audio detection.
Dahua Network Camera Web 3.0 Operation Manual
95
5.3.3 Smart Plan
Smart plan is the master switch for intelligent analysis such as “Face Detection”, “Heat Map”, “IVS”,
“People Counting” and so on, the corresponding intelligent functions can be valid after smart plan is
enabled.
Step 1
Select “Setup > Event > Smart Plan”. The system will display the interface of “Smart Plan”, which is
shown in Figure 5-69.
Figure 5-69
Step 2
Click “Save” to complete the config of smart plan.
5.3.4 Intelligence Behavior Analytics
The basic requirements of scene selection.
The total proportion of the target shall not exceed 10% of the image.
The target size in the image can’t be less than 10 pixel ×10 pixel, the size of abandoned target
can’t be less than 15 pixel × 15 pixel (CIF image); The height and width of the target can’t exceed
1/3 of the image; it is recommended that the target height is about 10% of the image height.
The difference of brightness value between target and background can’t be less than 10 gray levels.
Make sure the target appears at least over 2 seconds continuously in the field; the movement
distance has to be bigger than the width of the target itself and makes sure it is no less than 15
pixels (CIF image).
Try to lower the complexity of the monitoring scene analysis if it is possible; it is not advised to use
IVS functions in the environment where the targets are dense and light change is very frequent.
Try to keep away from the areas such as glass, ground reflected light, water surface, branch,
shadow, mosquito disturbance and etc. try to keep away from the backlight scene to avoid direct
light.
Dahua Network Camera Web 3.0 Operation Manual
96
5.3.4.1 IVS
5.3.4.1.1 Tripwire
It will trigger alarm when the target crosses the warning line according to the movement direction which
has been set.
It needs some time from when the target appears to when the target is confirmed, so it has to leave
some space on both sides of the warning line when setting the warning line, please do not set the
warning line near the obstructions.
Application scene: it can be applied to the scene with sparse target and there is barely any blocks
between the targets, such as the unmanned perimeter defense.
Step 1
Select “Setup > Event > IVS > IVS” and the system will display the interface of “IVS”.
Step 2
Click “ ” to set rule name and select the rule type as “Tripwire” which is shown in Figure 5-70.
Figure 5-70
Step 3
Click “Draw Rule” to draw tripwire in the monitoring scene, click the right mouse button to complete
tripwire setting.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameters of tripwire, please refer to the following sheet for more details.
Dahua Network Camera Web 3.0 Operation Manual
97
Parameter
Function
Object tracking
Select “Object tracking” to enable the function, refer to “2.4 Video Window
Adjustment” for more details.
Note:
The function is only supported by some models.
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Direction
It is to set the direction of tripwire, you can select A->B、B->A、A<->B.
Object Track
Select “Object Track” and it will enable the function of object track; when the
moving object triggers rule and generates alarm, it will select the display
mode of object track such as 1P+3 or 1P+5 in the preview interface, the
scene of tracking window will follow the moving object till the object leaves
the view range of the camera. Please refer to “2.4.8 Fisheye/Trigger Track”
for more details.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 5
Click “Save” to complete the setup of tripwire.
5.3.4.2 Intrusion
Intrusion includes cross and appears.
Dahua Network Camera Web 3.0 Operation Manual
98
Cross means that it will trigger alarm when the target enters or exits the area.
Appears means that it will trigger alarm when the target appears in the area.
As for the report interval of the IVS function in the area, the system will trigger an alarm if it detects
same event happened during the interval; the alarm counter will become zero if there is no same
event happened in the interval.
It needs to leave some space for target movement for the area periphery if it is to detect enter & exit
event, which is similar to the warning line.
Application scene; it can be applied to the scene where the target is sparse and there is barely any
obstruction between the targets, such as the unmanned perimeter defense.
Step 1
Select “Setup > Event > IVS > IVS” and the system will display the interface of “IVS”.
Step 2
Click “ ” to set rule name, select the rule type as “Intrusion” which is shown in Figure 5-71.
Figure 5-71
Step 3
Click “Draw Rule” to draw an area in the monitoring image.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameters of intrusion, please refer the following sheet for more details.
Dahua Network Camera Web 3.0 Operation Manual
99
Parameter
Function
Object tracking
Select “Object tracking” to enable the function, refer to “2.4 Video Window
Adjustment” for more details.
Note:
The function is only supported by some models.
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Action
It is to set the action of intrusion, you can select appears and cross.
Direction
It is to set the direction of intrusion, you can select enter, exit and
enter&exit.
Object Track
Select “Object Track” and it will enable the function of object track; when the
moving object triggers rule and generates alarm, it will select the display
mode of object track such as 1P+3 or 1P+5 in the preview interface, the
scene of tracking window will follow the moving object till the object leaves
the view range of the camera. Please refer to “2.4.8 Fisheye/Trigger Track”
for more details.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 5
Click “Save” to complete the setup of intrusion.
Dahua Network Camera Web 3.0 Operation Manual
100
5.3.4.3 Abandoned Object
Abandoned object means the system will trigger alarm if the abandoned object in the monitoring scene
exceeds the time which has been set by the users.
Abandoned object and missing object can be confusing in a situation where both foreground and
background are complicated.
It also triggers alarm as abandoned object if there is pedestrian or vehicle staying still for too long. In
order to filter this kind of alarm, generally the abandoned object is smaller than people and vehicle;
therefore it can filter the people and vehicle via setting size. Besides, it can avoid the false alarm caused
by short stay of people via extending alarm time properly.
Application scene: It can be applied to the scene where the target is sparse and there is no obvious and
frequent light change. False alarm will be increased in the scene with high target density and frequent
blocking; false alarm will be increased in the scene where there are more people staying. As for the
detection area, try to make it simple, the function is not suitable for the area which is too complicated.
Step 1
Select “Setup > Event > IVS > IVS” and the system will display the interface of “IVS”.
Step 2
Click “ ” to set rule name, select the rule type as “Abandoned Object” which is shown in Figure 5-72.
Figure 5-72
Step 3
Click “Draw Rule” to draw an area in the monitoring area.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameter of abandoned object, please refer to the following sheet for more details.
Dahua Network Camera Web 3.0 Operation Manual
101
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Keep time
It is to set the shortest time from when the object is abandoned to when it
triggers alarm.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 5
Click “Save” to complete the setup of abandoned object.
5.3.4.4 Missing Object
Missing object means the system will trigger alarm if it exceeds certain amount of time after the target is
taken away from the original scene.
The system can make statistics of the still areas in the foreground area and distinguish if it is missing
object or abandoned object according to the similarity between foreground and background, it will
trigger alarm when it exceeds the time which is set by users.
Because the system distinguishes abandoned object from missing object according to the similarity of
foreground and background, it may cause error between abandoned object and missing object in a
situation where both foreground and background are complicated.
Dahua Network Camera Web 3.0 Operation Manual
102
Application scene: it can be applied to the scene where the target is sparse and there is no obvious and
frequent light change. False alarm will be increased in the scene where the target density is high and
there is frequent obstruction; the false alarm will be increased in the scene where there are more people
staying. As for the detection area, try to make it simple, the function is not suitable for the area which is
too complicated.
Step 1
Select “Setup > Event > IVS > IVS” and the system will display the interface of “IVS”.
Step 2
Click “ ” to set rule name and select rule type as “Missing Object”, which is shown in Figure 5-73.
Figure 5-73
Step 3
Click “Draw Rule” to draw an area in the monitoring scene.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameters of missing object, please refer to the following sheet for more details.
Dahua Network Camera Web 3.0 Operation Manual
103
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Keep time
It is to set the shortest time from when the object is missing to when it
triggers alarm.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 5
Click “Save” to complete the setup of missing object.
5.3.5 Face Detection
Step 1
Select “Setup > Event > Face Detection” and the system will display the interface of “Face Detection”,
which is shown in Figure 5-74.
Dahua Network Camera Web 3.0 Operation Manual
104
Figure 5-74
Step 2
Select “Enable” to enable face detection function.
Step 3
Click “Draw Target” to draw the size model of target filter in the video image.
Step 4
It is to set the parameters of face detection, please refer to the following sheet for more details.
Parameter
Function
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Enable Face
Enhancement
Select “Enable Face Enhancement” and it will guarantee that the face is
clear by priority when the stream is set very low.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Dahua Network Camera Web 3.0 Operation Manual
105
Parameter
Function
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 5
Click “Save” to complete the setup of face detection.
5.3.6 People Counting
5.3.6.1 People Counting
Step 1
Select “Setup > Event > People Counting > People Counting” and the system will display the interface
of “Entrance/Exit”, which is shown in Figure 5-75.
Figure 5-75
Step 2
Select “Enable” to enable statistics function of entrance and exit.
Step 3
Dahua Network Camera Web 3.0 Operation Manual
106
Click “Draw Rule” to draw an area in the monitoring image.
Step 4
Click “Draw Target” to draw the size model of filtered target in the video image.
Step 5
It is to set the parameters of entrance and exit, please refer to the following sheet for more details.
Parameter
Function
Enable OSD
Select “Enable OSD” and it will display the people number statistics of
entrance and exit in the monitoring image.
Working Period
Note:
It is to set the alarm period, it can enable alarm event only during the period
range which has been set.
1. Click “Setup” and the system will pop out the interface of “Working
Period”.
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to
drag on the setup interface to set.
There are six periods to be set every day, select the check box in front
of the period, and then the period is valid.
Select week number (it selects Sunday by default, if it selects the whole
week, then it means the setup can be applied to the whole week, you
can also select the check box in front of the week number to implement
independent setting for some days).
3. Click “Save” to complete the setup of working period.
Installation
Mode
It is to select wall mount if there is an angle between device lens and
horizontal surface, select ceiling if the device lens face downward vertically.
Rule Name
It is to set the name of rule.
Direction
It is to select the direction of entrance and exit statistics; A->B or B->A, the
arrow direction always means the entrance direction.
Flowrate Alarm
It is to set the enter number, leave number, stranded number; it will trigger
alarm when it exceeds the limited number.
Record
Check it and so when alarm occurs, system will auto record.
Record Delay
System can delay the record for specified time after alarm ended.
Relay out
Enable alarm activation function. You need to select alarm output port so
that system can activate corresponding alarm device when alarm occurs.
Alarm Delay
System can delay the alarm output for specified time after alarm ended.
Send Email
If you enabled this function, System can send out email to alert you when
alarm occurs and ends. User can set email address in Network>SMTP.
Snapshot
Select “Snapshot” and the system will auto trigger alarm and snapshot when
alarm occurs.
Step 6
Click “Save” to complete the setup of people counting.
Dahua Network Camera Web 3.0 Operation Manual
107
5.3.6.2 Report
It is to generate a form of report according to the number statistics.
Step 1
Select “Setup > Event > People Counting > Report “and the system will display the interface of “Report’,
which is shown in Figure 5-76.
Figure 5-76
Step 2
It is to set search condition, please refer to the following sheet for more details.
Parameter
Note
Report Type
Can select day report, month report and year report; also can select bar chart or line
chart to display the report.
Time
It can set the begin /end time within the range of statistics time.
Flow Direction
It can select enter, leave and display number; the data of checked item can be
displayed in the report.
Search
Search flow statistics data according to the setting to form report.
Export
Export the saved report.
Step 3
Click “Search” to complete report statistics, click “Export” to export the report.
5.3.7 Heat Map
5.3.7.1 Heat Map
It is the density statistics of moving object that can generate report, the color range is from blue to red,
blue means the min heat value and red means the max heat value.
Mirroring, view angle change and heat map original data will be cleared.
Dahua Network Camera Web 3.0 Operation Manual
108
Step 1
Select “Setup > Event > Heat Map > Heat Map” and the system will display the interface of “Heat Map”,
which is shown in Figure 5-77.
Figure 5-77
Step 2
Select “Enable” to enable heat map function.
Step 3
It is to set the working period.
1. Click “Setup” and the system will display the interface of “Working Period”, which is shown in Figure
5-78.
Dahua Network Camera Web 3.0 Operation Manual
109
Figure 5-78
2. It is to set working period according to the following methods:
You can input time numerical value or press the left mouse button to drag on the setup interface to
set.
There are six periods to be set every day, select the check box in front of the period, and then the
period is valid.
Select week number (it selects Sunday by default, if it selects the whole week, then it means the
setup can be applied to the whole week, you can also select the check box in front of the week
number to implement independent setting for some days).
3. Click “Save” to complete the setup of working period.
Step 4
Click “Save” to complete the setup of heat map.
5.3.7.2 Report
It is to generate the form of report according to the heat map data.
Step 1
Select “Setup > Event > Heat Map > Report” and the system will display the interface of “Report”, which
is shown in Figure 5-79.
Dahua Network Camera Web 3.0 Operation Manual
110
Figure 5-79
Step 2
It is to set begin time and end time.
Step 3
Click “Search” to complete report statistics, click “Export” to export the statistics report.
5.3.8 Alarm
Please note some series products do not support this function.
5.3.2.1 PIR alarm
The alarm activation interface PIR alarm is shown as in figure 5-80.
Dahua Network Camera Web 3.0 Operation Manual
111
Figure 5-80
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
After enabled, relay activation will work. Check it and enable the
PIR alarm.
Working
period
This function becomes activated in the specified periods.
There are six periods in one day. Please draw a circle to
enable corresponding period.
Select date. If you do not select, current setup applies to
today only. You can select all week column to apply to the
whole week.
Click OK button, system goes back to motion detection
interface; please click save button to exit.
Note: User can set via dragging mouse while not releasing left
mouse.
Anti-dither
System only memorizes one event during the anti-dither period.
The value ranges from 0s to 100s.
Flash
After enabling, the system will automatically turn on the flash
when alarm occurs.
Flash Delay
The flash will be off with a period of time delay when the
alarm linkage is over.
Time is calculated by unit of second and ranges from
10s~300s.
Record
System auto activates motion detection channel to record once
alarm occurs (working with motion detection function).
Record Delay
System can delay the record for specified time after alarm ended.
The value ranges from 10s to 300s.
Dahua Network Camera Web 3.0 Operation Manual
112
Parameter
Function
Relay out
Enable alarm activation function. You need to select alarm output
port so that system can activate corresponding alarm device when
alarm occurs.
Alarm delay
System can delay the alarm output for specified time after alarm
ended. The value ranges from 10s to 300s.
Send Email
After this function is enabled, system can send out email to alert
you when alarm occurs and ends.
Audio Linkage
Check it and the system will play alarm audio file when alarm
occurs. Users can set recorded audio file in “Camera Setting ＞
Audio ＞Alarm Audio”.
Snapshot
After you enabled snapshot, the system will automatically
snapshot if alarm occurs.
5.3.8.1 Alarm Linkage
Figure 5-81
Parameter
Function
Enable
Check it and enable the alarm linkage.
Relay-in
The default alarm 1，some products can choose alarm 2.
Sensor Type
Two types of sensor which are normally open (NO) and normally closed (NC),
switch from normally open to normally closed, open the alarm. Switch from normally
closed to normally open, shut the alarm.
Dahua Network Camera Web 3.0 Operation Manual
113
Parameter
Function
PTZ
Check it and set PTZ movement when alarm occurs. Such as go to preset x when
there is an alarm.
The event type includes: preset, tour and pattern and so on.
5.3.8.2 Flash Set
Figure 5-82
Parameter
Function
ON/OFF
ON means flash is on; OFF means flash is off.
Weak-strong
bar
Via dragging this bar to adjust flash brightness.
All
Check and it means the day flash works.
Period
Period that flash is on.
5.3.8.3 Audio detection
Note: Audio detection won’t work when “Talk” is enabled on the preview interface.
Dahua Network Camera Web 3.0 Operation Manual
114
Figure 5-83
parameter
Function
Enable
Check it and enable audio detection.
Threshold
It will trigger alarm and set up a series of linkage when volume exceeds the set
threshold.
5.3.9 Abnormity
Abnormity includes No SD Card, Capacity Warning, SD Card Error, Disconnection, IP Conflict and
Unauthorized Access.
Note:
Only device with SD card function has these three statuses: No SD card, capacity warning, and SD card
error. Device without SD card function does not have the above three statuses. See Figure 5-84 to
Figure 5-86.
Dahua Network Camera Web 3.0 Operation Manual
115
Figure 5-84
Figure 5-85
Dahua Network Camera Web 3.0 Operation Manual
116
Figure 5-86
Please refer to the following sheet for detailed information.
Parameter
Function
Enable
Check to alarm when SD card is abnormal.
Relay-out
Check to enable relay-out alarm.
Relay out
delay
The alarm output can delay for the specified time after alarm stops. The
value ranges from 10s to 300s.
Note:
No SD card, capacity warning, SD card error, relay-out delay all start
from alarm occurs.
Send
email
After you enabled this function, the system can send out email to alarm
the specified user.
This function is invalid when network is offline or IP conflict occurs.
SD Card
Capacity
Limit
User can set SD card capacity that is left free. When SD card space left
is smaller than this limit, alarm occurs.
When device is offline or IP conflicts, the abnormal alarm is similar with case of SD card error.
Dahua Network Camera Web 3.0 Operation Manual
117
Figure 5-87
When login password keep been wrong for a few times, unauthorized access alarm occurs. This
operation is similar to SD card error. Allow login error times as when it exceeds this limit, user account
will be locked.
Figure 5-88
5.4 Storage Management
5.4.1 Schedule
Before schedule setup, user must set record mode is auto or manual.
Note:
If record mode in record control is off, then device will not snapshot according to schedule.
5.4.1.1 Record Schedule
Record schedule steps:
Step 1. Click on Record Schedule, see Figure 5-89.
Dahua Network Camera Web 3.0 Operation Manual
118
Figure 5-89
Step 2. From Monday to Sunday select record time, click on setup on the right, see Figure 5-90.
Set period according to actual need. There are six periods available each day.
By checking or unchecking, you can add or delete three types of record schedule: General, Motion,
and Alarm.
Note:
Period setup can be done by dragging in record schedule interface while not releasing left mouse.
Figure 5-90
Step 3. Click on OK, return to record schedule interface. See Figure 5-91.
Green color stands for the general record/snapshot.
Yellow color stands for the motion detect record/snapshot.
Red color stands for the alarm record/snapshot.
Dahua Network Camera Web 3.0 Operation Manual
119
Figure 5-91
Step 4. In record schedule interface, click on OK. System prompts it is successfully saved.
5.4.1.2 Snapshot Schedule
Snapshot setup as:
Step 1. Click on Snapshot Schedule tab, see Figure 5-92.
Figure 5-92
Step 2. From Monday to Sunday select snapshot time, click on setup on the right. See Figure 5-93.
Set snapshot period according to actual need. There are six periods available each day.
Dahua Network Camera Web 3.0 Operation Manual
120
By checking or unchecking, user can add or delete three types of snapshot schedule: General,
Motion and Alarm.
Note: Period setup can be done by dragging in snapshot schedule interface while not releasing left
mouse.
Figure 5-93
Step 3. Click on OK, return to snapshot schedule interface. See Figure 5-94.
Green color stands for the general record/snapshot.
Yellow color stands for the motion detect record/snapshot.
Red color stands for the alarm record/snapshot.
Figure 5-94
Step 5. In snapshot interface, click on OK. System prompts it is successfully saved.
Dahua Network Camera Web 3.0 Operation Manual
121
5.4.1.3 Holiday Schedule
Holiday schedule can set specific date as holiday.
Step 1. Click on Holiday Schedule tab, see Figure 5-95.
Figure 5-95
Step 2. Select date to set as holiday. The selected date will be highlighted in yellow.
Step 3. Check Record/Snapshot, click on Save. System prompts it is successfully saved.
Step 4. Check Record Schedule/Snapshot Schedule interface, click on setup next to Holiday, and refer
to setup of Monday to Sunday.
Step 5. Complete setup of holiday, then it records/snapshots according to date in holiday schedule.
5.4.2 Destination
5.4.2.1 Path
The destination interface is shown as in Figure 5-96.
Path can config record and snapshot storage path. There are three options: Local, FTP and NAS. You
can only select one mode. System can save according to the event types. It is corresponding to the
three modes (general/motion/alarm) in the Schedule interface. Please check the box to enable the save
functions.
Note: Only device supports SD card has local.
Dahua Network Camera Web 3.0 Operation Manual
122
Figure 5-96
Please refer to the following sheet for detailed information.
Parameter
Function
Event
Type
It includes: scheduled, motion detect and alarm.
Local
It saved in the SD card.
FTP
It saved in the FTP server.
NAS
It saved in NAS disk.
5.4.2.2 Local
The local interface is shown as in Figure 5-97.
Here you can view local Micro SD card or NAS disk information. You can also operate the read-only,
write-only, hot swap and format operation.
Figure 5-97
Dahua Network Camera Web 3.0 Operation Manual
123
5.4.2.3 FTP
The FTP interface is shown as in Figure 5-98.
You need to check the box to enable the FTP function. When network disconnect occurred or there is
malfunction. Emergency storage can save the record/snapshot picture to the local SD card. Click the
test button to check if the FTP server can be connected for test.
Figure 5-98
5.4.2.4 NAS
You need to check the box to enable the NAS function. Select NAS storage, fill in NAS server
address and corresponding store path, then you can store video file or pictorial information in the NAS
server.
Select NAS storage as to same file to NAS disk. See Figure 5-99.
Figure 5-99
Parameter
Function
Server Address
Set IP address of NAS server.
Dahua Network Camera Web 3.0 Operation Manual
124
Parameter
Function
Remote
Directory
Set storage directory, videos and pictures can be stored in to corresponding server
directory.
5.4.3 Record control
The record control interface is shown as in Figure 5-100.
Figure 5-100
Please refer to the following sheet for detailed information.
Parameter
Function
Pack
Duration
Here you can select file size within 1min~120min. Default setup is 8
minutes.
Pre-record
Please input pre-record value here.
For example, system can record the four seconds video in the buffer.
The record begins from the fifth second.
Note:
Configure pre-record time, when alarm or motion detection occurs, if
there is no record, system will record the preceding n seconds
record.
Disk Full
There are two options: stop recording or overwrite the previous files
when HDD is full.
Stop: Current working HDD is overwriting or current HDD is full,
it will stop record.
Overwrite: Current working HDD is full; it will overwrite the
previous file.
Record
mode
There are three modes: Auto/manual/close.
Record
stream
There are two options: main stream and sub stream.
Dahua Network Camera Web 3.0 Operation Manual
125
5.5 System
5.5.1 General
The General interface is shown as in Figure 5-101.
Figure 5-101
Please refer to the following sheet for detailed information.
Parameter
Function
Device
Name
It is to set device name.
Note: Different devices have different names.
Video
Standard
This is to display video standard such as PAL.
Language
You can select the language from the dropdown list.
TV Out
You can open or close the function, it can only be supported by the
devices with TV Out.
Intelligent function will be disabled when TV Out is opened.
It will auto close TV Out when intelligent function is enabled.
Some devices support SDI and HDCVI.
The Date & Time interface is shown as in Figure 5-102.
Dahua Network Camera Web 3.0 Operation Manual
126
Figure 5-102
Please refer to the following sheet for detailed information.
Parameter
Function
Date format
Here you can select date format from the dropdown list.
Time
Format
There are two options: 24-H and 12-H.
Time zone
The time zone of the device.
Current
Time
It is to set system time. It becomes valid after you set.
Sync PC
You can click this button to save the system time as your PC current
time.
DST Enable
Here you can set both begin and end time of daylight saving time.
You can set according to the date format or the week format.
Synchronize
with NTP
You can check the box to enable NTP function.
NTP server
You can set the time server address.
Port
It is to set the time server port.
Update
period
It is to set the sync periods between the device and the time server.
Dahua Network Camera Web 3.0 Operation Manual
127
5.5.2 Account
For user name and user group, the max length is 31 characters, which can be made up of digit,
letter, underline, hyphen, dot and @.
Password can be 0~32 characters in number and letter only. User can modify other user’s
password.
User and group can be manually added to 18 and 8 respectively.
User management adopts group/user modes. The user name and the group name shall be unique.
One user shall be included in only one group.
Currently logged in user cannot change his/her own right.
5.5.2.1 Username
In this interface you can enable anonymity login, add/remove user and modify user name. See Figure 5-
103.
Figure 5-103
Enable anonymity login: Enable anonymity login, and input IP. No username or password is required,
you can log in by anonymity (with limited rights). You can click logout to end your session.
Add user: It is to add a name to group and set the user rights. See Figure 5-86.
Hidden user “default” is for system interior use only and cannot be deleted. When there is no login user,
hidden user “default” automatically login. You can set some rights such as monitor for this user so that
you can view some channel view without login.
Here you can input the user name and password and then select one group for current user.
Dahua Network Camera Web 3.0 Operation Manual
128
Please note the user rights shall not exceed the group right setup.
For convenient setup, please make sure the general user has the lower rights setup than the admin.
Figure 5-104
Modify user
It is to modify the user property, belonging group, password and rights. See Figure 5-103.
Modify password
It is to modify the user password. You need to input the old password and then input the new password
twice to confirm the new setup. Please click the OK button to save.
Please note, the password ranges from 0-digit to 32-digit. It shall include the number and letter only. For
the user who has the account rights, he can modify the password of other users.
Dahua Network Camera Web 3.0 Operation Manual
129
Figure 5-105
5.5.2.2 Group
The group management interface can add/remove group, modify group password and etc.
The interface is shown as in Figure 5-106.
Figure 5-106
Add group: It is to add group and set its corresponding rights. See Figure 5-107.
Dahua Network Camera Web 3.0 Operation Manual
130
Please input the group name and then check the box to select the corresponding rights. It includes:
preview, playback, record control, PTZ control and etc.
Figure 5-107
Modify group
Click the modify group button, you can see an interface is shown as in Figure 5-108.
Here you can modify group information such as remarks and rights.
Figure 5-108
5.5.3 PTZ
Please note only some series products support this function.
… 135 …

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Dahua IPC-PFW8601-A180 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Dahua IPC-PFW8601-A180 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,13 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Dahua IPC-PFW8601-A180

Dahua IPC-PFW8601-A180 Snelstart handleiding - English - 17 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info