Automatic clock setting and correction
Even though you turn the TV off with MAIN POWER (ON/OFF) button, if you
select a programme of your country which has Teletext or PDC transmission,
clock will be set and corrected automatically.
This function is only available for the countries as follows:
Deutschland, Great Britain, France, Italy, Sweden,
Switzerland, Netherlands, Ireland
SETTING THE WAKE UP TIME / PROGRAMME
• Confirm the Clock is set.
Wake up time is only available when Clock is set
• Select the Wake up to "YES".
The Wake up time and Wake up prog. will be displayed.
• Set Wake up time and prog. in a same way to the above for Clock.
The set will switch on to this time and programme number.
Note that the Wake up time is not operate in Childlock mode.
SLEEP
By pressing the SLEEP ( ) button repeatedly, you can select one of the
following setting:
00:20 -> 00:40 -> 01:00 -> 01:20 -> 01:40 -> 02:00
The set will turn off after time you select.
Automatic Switch-Off in No Broadcast Signal
If a broadcast signal is not present for about 30 minutes, the set will be auto-
matically turned off.
In AV mode, however, this function does not operate.
9
CHILD LOCK
You can prevent the use of the TV set without the remote control.
The set is child-locked after switching off the set by pressing the R, G, Y, C,
the POWER button ( ) in sequence on the remote control within 5 sec-
ond. The child-lock function is indicated by flashing the INDICATOR on the
front of set.
The set can only be switched back on using the remote control.
ASPECT CONTROL
Whenever the Zoom button is pressed, the screen will be changed as shown :
DWL-28 16:9
->
4:3
->
Zoom
->
Zoom+ -> Panorama
DTW-28 16:9
->
4:3
->
Zoom-> Panorama
DTJ-28, DTL-29 4:3
->
16:9
->
Zoom
->
Waterglass
STILL
The Still button allows you to freeze the picture at anytime.
