24
See section near the end of section DAILY USE for a more detailed explanation of these functions.
(For operating instructions see page 19, HOW TO USE THE SUB-MENUS)
1. When switched to ON:
Prevents the use of the TV
set without remote control.
2. Wake up function This
function is only selectable
when the clock is set. The
TV set turns on from stand-
by at the WAKE TIME with
the programme entered on
the WAKE PROG. line. Put
the TV set on stand-by
with the remote control.
1. Adjust this value ON or
OFF.
- In stand-by mode, the
stand-by indicator flashes
red and green to indicate
the CHILD LOCK is set.
- The front panel TV
buttons (B2, B3, B4)
become inactive and the
TV will only respond to
the remote control.
2. Switch the WAKE UP
function OFF or ’ON’ (the
time will be shown e.g.
07:15) with the remote
control CURSOR LEFT (A7)
/RIGHT (A20) buttons
- Enter the wake up time
with the remote control
0...9 NUMBER (A3)
buttons.
3. Adjust TV turn-on program
number.
4. Adjust TV clock. Clock will
start at 0 seconds upon
entry of the 4th figure.
The prog. no. which can
be used to automatically
seize the time at turn on
can be entered here.
5. Choose your preferred
default format with the
remote control CURSOR
LEFT (A7) /RIGHT (A20)
buttons.
Note : For 4:3 TVs FULL
SCREEN is represented by
4:3. For 16:9 TVs FULL
SCREEN is represented by
16:9.
6. The currently selected
LANGUAGE is displayed.
Press the OK button (A18)
to access the menu and
change the selection.
4. TV clock setting
This function allows user to
enter the time manually.
Note : If you turn off the
set with the main power
button, the clock setting is
lost. An automatic attempt
is made to set the clock
again at power on.
5. This function is only
selectable when the default
picture format is currently
active (see also FORMAT
8). This selects the default
format to be used only
when the format selected
with the ZOOM button
(A15) is AUTO, and no
picture format signalling
data is received.
6. LANGUAGE menu entry.
3. Shared with WAKE TIME.
Features Menu
