561966
1
Verklein
Vergroot
Pagina terug
1/4
Pagina verder
User's Manual
iPod Player not included
When used in the directed manner, this unit has been designed and
manufactured to ensure your personal safety. However, improper use can
result in potential electrical shock or fire hazards. Please read all safety and
operating instructions carefully before installation and use, and keep these
instructions handy for future reference. Take special note of all warnings
listed in these instructions and on the unit.
1.Water and Moisture
The unit should not be used near water. For example: near a bathtub,
washbowl, kitchen sink, laundry tub, swimming pool or in a set basement.
2.Ventilation
The unit should be situated so that its location or position does not interfere
with its proper ventilation. For example, it should not be situated on a bed,
sofa, rug or similar surface that may block the ventilation openings. Also,
it should not be placed in a built-in installation, such as a bookcase or
cabinet, which may impede the flow of air through the ventilation openings.
3.Heat
The unit should be situated away from heat sources such as radiators, heat
registers, stoves or other appliances (including amplifiers) that produce heat.
4.Power Source
The unit should be connected to a power supply only of the type described
in the operating instructions or as marked on the appliance.
5.Power Cord Protection
Power supply cords should be routed so that they are not likely to be walked
on or pinched by items placed upon or against them. It is always best to
have a clear area from where the cord exits the unit to where it is plugged
into an AC outlet.
6.Cleaning
The unit should be cleaned only as recommended. See the section "Care
and Maintenance" of this manual for cleaning instructions.
7.Object and Liquid Entry
Care should be taken so that objects do not fall and liquids are not spilled
into any openings or vents located on the product.
8.Attachments
Do not use attachments not recommended by the product manufacturer.
9.Lightning and Power Surge Protection
Unplug the unit from the wall outlet ouring lightning storms.
This will prevent damage to the product due to power-line surges.
2
Thank you for purchasing the Universal MP3 player docking Music Cube.
This system incorporates the following features :
®® ®
iPod , iPod mini and iPod nano Player / Re-charger
®
Interchangeable iPod Adaptors
USB docking for playback of MP3 player
Audio line-in for connecting CD player or other digital audio player
AM(MW)/FM Stereo receiver with 10AM + 10FM presets, Digital Tuning
and auto-search function
Electronic Volume Control
Built-in 2 High Fidelity Speakers
Multi-function Back-lit LCD Display
Clock and Year/Month/date function
®
Wake up to Alarm (Buzzer), Radio or iPod with Snooze function
Sleep to Music Timer
External FM Antenna connector for better reception
Stereo Headphone jack connection for private listening
®® ®
iPod , iPod mini and iPod nano are trademarks of Apple Computer Inc.,
registered in the U.S. and other countries.
Important Safety Instructions
10.Do not overload wall outlets, extension cords, or integral convenience
receptacles as this can result in a risk of fire of electric shock.
11.Damage Requiring Service
This unit should be serviced by qualified service personnel when:
A.The power supply cord or plug has been damaged.
B.Objects have fallen into or liquid has been spilled into the enclosure.
C.The unit has been exposed to rain.
D.The unit has been dropped or the enclosure damaged.
E.The unit exhibits a marked change in performance or does not operate
normally.
12.Antenna
Do not connect an external antenna to the unit (other than that provided).
13.Periods of Nonuse
If the unit is to be left unused for an extended period of time, such as a m onth
or longer, the power cord should be unplugged from the unit to prevent
damage or corrosion.
14.Servicing
The user should not attempt to service the unit beyond those methods
described in the user's operating instructions. Service methods not covered
in the operating instructions should be referred to qualified service personnel.
Features
3
folded: 105 x 148.5mm
use 4 pcs 210 x 148.5mm / 80gms paper
bk+bk ( black on white)
04/03/2008 VER3.0-UK
iPod Speaker Clock
Radio with USB
TC-656W
HELPLING NUMBER 0870 100 2525
TC-656B
®
12. FUNCTION button : Selects AM/FM radio, iPod mode, AUX
(auxiliary input) mode and USB mode.
13. USB connector : Connection for MP3 player
14. +10 button : To advance 10 Songs (files)
15. DIR+ button : Advance to next directory
16. FR button : Skip Backward
®
1. iPod docking station
®
2. iPod docking connector
3. POWER ON/OFF button: To turn the unit on and off.
4. VOLUME +/- buttons : Adjusts volume level up or down.
5. SNOOZE / LIGHT button: Activates the snooze function; Turn LCD
backlight ON/OFF.
6. TUN +/- buttons : Tunes the radio channel frequency up or down.
7. CH +/- buttons : Selects the preset radio stations.
8. ALARM ON/OFF button : Switches the alarm on or off.
9. SLEEP button : Selects the time duration of the sleep timer.
10. MODE button : Enters the setting mode.
11. MEM button : Save the radio preset stations; saves settings.
Clock and presets battery back-up
A backup battery compartment located at rear of the unit.
(1) Open the battery compartment door.
(2) For clock and settings backup, follow the polarity diagram shown inside
the compartment and install 2 x AAA batteries (purchase separately).
(3) Close the battery compartment door.
FM Antenna Installation
Connect the FM antenna wire to the FM Antenna terminal and extend it for
the best reception (see figure below).
Connect FM antenna wire to the antenna terminal at rear of the main unit
AC-DC Adaptor Connection
The unit can be powered by an external AC-DC Adaptor, with a required
output DC 10V 1400mA (included).
(1) Firmly and securely plug the adaptor's AC plug into AC main outlet.
(2) Connect the adaptor's DC output plug to the DC-in jack of the unit.
OPEN
RESET
AUX
Installation
4
Description of Parts Main Unit
Main Unit
Top view
DIR+
+10
FF
FR
FUNCTION
MEM
MODE
SLEEP
+
-
SNOOZE/LIGHT
USB
15
14
16
17
19 18
13
1 2 12 11 10
9
5 6 8 4 3 7
MONTH
DATE
DUAL TIME
21
20
21
Front view
Rear view
OPEN
RESET
AUX
DC 10V
EXTERNAL FMANT
26
27 22 24 23
25
5
17. FF button : Skip Forward
18. PLAY/PAUSE button
19. STOP button
20. LCD display
21. Pair of Speakers
22. AUX IN jack: Auxiliary audio signal input.
23. DC-in jack : For the connection of external DC power supply
24. Phones Jack
25. FM Antenna terminal
26. Battery Compartment
27. RESET button: Resets the unit.
6 7
Description of Parts Remote Control
Remote Control
1. Infrared Transmitter
2. POWER ON/OFF button
3. VOL +/- buttons
4. FUNCTION button
5. ALARM ON/OFF button
6. SNOOZE / LIGHT button
7. TUN Up/Down buttons: for Up,
for Down
8. CH + / - buttons
9. MEM button
10. MODE button
11. SLEEP button
12. iPod Skip/Search Forward/Backward buttons:
for Forward, for Backward.
13. iPod PLAY/PAUSE button
14. Battery Compartment
®
Five different adaptors are designed to suit any “dockable” iPod model
®
to the docking station. Before connecting your iPod to the system,
®
select and insert the proper adaptor for your iPod model into the
®
docking station first (refer to following iPod adaptor table) .
®
Description of Parts iPod adaptors
®
iPod adaptor Table :
* For the 5G (fifth generation) 30GB and 60GB iPods with video capability.
®
Please use the original adaptor from your 5G iPod model at the time of
purchase. No 5G adaptor is provided from this system.
®
Install this “Docking Station Dust Cover” in the docking station if no iPodw ill
be docked for an extended period of time.
Clock and Calendar Settings
When the unit is at the power off mode.
Set Clock
1. Press the MODE button 3 times, the clock display flashes.
2. To set the hour, press the TUN +/- button to set advance or reverse hour
setting. Press and hold the button for fast advance / reverse value.
3. To set the minute, press the VOLUME +/- button to set advance or reverse
minute setting. Press and hold the button for fast advance / reverse value.
Set 12/24 Hour format
4. Press the MODE button again to enter 12/24 hour format setting mode.
5. To select 12/24 hour format, press either the TUN +/- button.
Alarm Operations
Setting the Alarm time
When the unit is at the power off mode.
1. Press the MODE button once. The alarm clock display flashes.
2. To set the hour, press TUN + / - button to set advance or reverse hour setting.
Press and hold the button for fast advance / reverse value.
3. To set the minute, press the VOLUME +/- button to set advance or reverse
minute setting.
Press and hold the button for fast advance / reverse value.
4. Press the MODE button again. The alarm source icon flashes.
5. Select “Wake to Buzzer” “Wake to Radio” or “Wake to
iPod” & iPod by pressing the VOLUME +/- button.
Note : - When “Wake to Radio” is selected, ensuring that your desired
radio station is tuned and the proper volume level is set.
® ®
- When “Wake to iPod ” is selected but your iPod has not been
docked, the alarm source will be redirected to the Buzzer
automatically when the alarm time is reached.
6. To save all settings and exit the setting mode, press the MEM button
or wait for around 10 seconds.
7. To activate the daily alarm, press the ALARM ON/OFF button. A " "
indicator appears on LCD display.
8. When the current time matches the alarm setting, the alarm sounds from
the selected source.
Wake to Buzzer
When the alarm time is reached, the buzzer alarm will sound for one minute.
st
After the 1 alarm minute, it goes into Auto Snooze mode. The display shows
the "SNOOZE" indicator. The buzzer turns off for the snooze time (around 10
minutes) then comes on again. This operation will be repeated 3 times. After
the fourth alarm is finished, the alarm will shut off until the same alarm time
on the next day.
You may also activate the snooze function manually after the alarm sounds
by pressing the SNOOZE button. The buzzer stops for the snooze time then
comes again.
The snooze operation (including auto snooze and manual snooze) can be
repeated by three times.
To stop the alarm immediately after the buzzer sounds, you can also press
the ALARM ON/OFF button. It resets itself for the following day.
8
Sleep Timer Function
Sleep to Timer
This feature allows you to fall asleep to the radio or an USB dockable MP3
player for up to 60 minutes, and then the system shuts off automatically.
(1) Press the POWER button to turn the unit on.
(2) Either in radio mode, tune to the desired radio station (see “Listening To
The Radio” section in this manual) or in USB mode, playback music from
the MP3 player (see “Listening To The MP3 Player” section in this manual).
(3) To select the sleep timer to turn the unit off after 15, 30, 45 or 60 minutes,
press the SLEEP button 1, 2, 3 or 4 times, respectively. The unit plays for
the selected length of time then automatically turns off.
(4) To turn the unit off before the sleep timer counts down to zero, press the
POWER button at any time.
Note :If you are falling asleep to music from an iPod or an external device
connected to the Aux Input, the sleep timer will shut off the power to this
system but it will not turn off those devices.
9
10
Listening To The Radio
FM Antenna
Connect the FM antenna wire to the FM Antenna terminal.
Fully extend the FM antenna wire for maximum reception.
Radio Tuning
1. Press the POWER button to turn on the unit.
2. To activate the radio, press the FUNCTION button to select AM(MW)
or FM radio mode.
3. In FM radio mode, if necessary, press the MODE button to select STEREO
(ST) or MONO FM reception.
4. To manually tune to a desired station, repeatedly press the TUN +/- button.
5. To automatically search for stations with strong signals, press and hold the
TUN +/- button until the frequency reading on the display begins to scan
then release the button. The tuner will stop on the first strong station signal
it finds.
Notes:
Use manual tuning to select weaker stations that might be bypassed during
automatic tuning.
If the automatic tuning does not stop on the exact frequency of the station,
for example, it stops on 100.9 MHz instead of 100.8 MHz, use the manual
tuning method to “fine tune” to the exact frequency of the desired station.
Radio Broadcast System Selection
In case the unit is moved to different country with slightly different radio
broadcast system, the unit allows you to select USA, EU and Japan systems.
For the use in Australia, please use EU's radio broadcast system.
1. When the unit is in power off mode.
2. Press the MODE button repeatedly until the display shows the flashing
“USA”, “EU” or “JP” indicator.
3. Press the TUN +/ - button to select one of the broadcasting systems.
USA's Radio Broadcast System AM 520 – 1710 kHz, 10kHz tuning step
FM 87.5 – 108 MHz, 0.1MHz tuning step
EU's Radio Broadcast System AM 522 – 1620 kHz, 9kHz tuning step
FM 87.5 – 108 MHz, 0.05MHz tuning step
Japan's Radio Broadcast System AM 522 – 1629 kHz, 9kHz tuning step
FM 76.0 – 108 MHz, 0.1MHz tuning step
4.To save the setting and exit the setting mode, press the MEM button.
11
Wake to Radio
When the alarm time is reached, the radio will automatically turn “ON”.
It starts softly and gradually becomes louder.
It plays for 60 minutes then shuts off and resets itself for the following day.
During the activation of the radio, you may press the SNOOZE button to
activate the snooze function. The radio stops for the snooze time (around
10 minutes) then turns “ON” again. This manual snooze operation can be
repeated three times. Each time the radio turns “ON”, it plays for 60
minutes (without pressing the snooze button).
To stop the alarm immediately after the radio sounds, you may also press
the ALARM ON/OFF button. It resets itself for the following day.
®
Wake to iPod
®
Your docked iPod will automatically switch on when the alarm time is
reached. It starts softly and becomes gradually louder.
®
The iPod playback will keep for 60 minutes and then automatically
shut off.
®
To stop the iPod playback immediately, press the ALARM On/Off button
once.
When the alarm sounds, it can be temporarily stopped by pressing the
SNOOZE button. The display will show the indicator “SNOOZE” .
The alarm will be delayed for 10 minutes and then come again.
This manual snooze operation can be repeated only three times.
Set Year
6. Press the MODE button again to enter the year setting mode, the year
reading flashes.
7. To set year, press the TUN +/ - button to set advance or reverse the year.
Press and hold the button for fast advance / reverse value.
Set Month/Date
8. Press the MODE button again to enter the month/date setting mode,
the month/date reading flashes.
9. To set Month, press the TUN + / - b utton to s et a dvance o r re verse th em onth.
Press and hold the button for fast advance / reverse value.
10. To set Date, press the VOLUME +/- button to set advance or reverse date.
Press and hold the button for fast advance / reverse value.
Exit setting mode
11. To save all settings and exit the setting mode, press the MEM button.
Radio Preset Stations
The unit allows you to store up to 10 AM(MW) and 10 FM stations in the tuner
preset memories for easy recall at any time.
1. Press the POWER button to turn on the unit.
2. To activate the radio, press the FUNCTION button to select AM(MW) or
FM band.
3. Tune to a radio station you want to store in memory using the TUN +/-
button.
4. Press the MEM button. The preset channel number “ 01” AND MEM icon
flash on display.
5. To select desired preset station number, press the CH +/- button.
6. To confirm preset location, press the MEM button.
7. To store up to 10 AM and 10 FM station presets, repeat steps 3 to 6 above.
®
Listening To The iPod
®®
This model provides 5 different iPod adaptors for different dockable iPod
®
models. If no iPod will be docked for an extended period of time, it is
recommended to cover the dock connector by the“Dust Cover” (included).
®®
1. Select the suitable iPod adaptor for your iPod model, see the
®
“iPod adaptor table” in a previous section of this manual.
®
2. For docking iPod Nano, slide the dock
®
connector to the left.For other iPod models,
slide the dock connector to the right. Plug the
®®
iPod adaptor on the iPod docking area.
®
3. Insert your iPod with its Dock Connector
faced downward to the Dock connector of
this unit.
DIR+
+10
FF
FR
FUNCTION
MEM
MODE
SLEEP
+
-
SNOOZE/LIGHT
USB
®
Insert iPod to
the docking
station
®
Plug the iPod
adaptor to the
docking area
®
Charging the iPod Battery
®
With the AC-DC Adaptor powered to the unit, once your iPod connected to
®®
the iPod docking station, the unit recharges the iPod battery (not apply for
the AM or FM radio mode).
4. Press the POWER button to switch on the unit.
5. Press the FUNCTION button repeatedly until the “iPod” indicator shows
®
on the display then switch ON your iPod .
®
6. Press the PLAY/PAUSE button from your iPod to pause or resume
®
iPod playback.
7. Press the VOLUME +/- button on this unit to adjust your desired volume
level.
NOTE: The Volume level cannot be adjusted by the volume control of your
®
iPod after being docked.
8. If necessary, select other feature by operating those controls from your
®
iPod as usual. For example, you may select other file (song) by pressing
®
the or button from your iPod ; depress and
®
hold the or button of your iPod for fast-rewinding or fast-forwarding
during playback.
®
9. To remove the iPod from the unit, press and hold the PLAY/PAUSE
®
button of your iPod for three seconds to switch it off and then gently take
it out from the docking station.
Listening To The MP3 Player
This unit provides an USB docking station for the connection of your USB dockable
MP3 player and playback the music through the speakers of this system.
1. Insert the USB dockable MP3 player into the USB docking station.
2. Press the POWER button to switch on the unit.
3. Press the FUNCTION button repeatedly until the "USB" indicator shows
on the display.
4. Press the PLAY/PAUSE button to start playback music.
5. Press the VOLUME +/- button to adjust your desired volume level.
6. If necessary, you may operate the unit by pressing following buttons:
(a) To select previous or next file (song) by pressing the or button.
(b) Press the PLAY/PAUSE button to pause or resume playback.
(c) Press DIR+ button to advance to next directory.
(d) Press +10 button to advance 10 songs (files).
7. To remove the MP3 player from the unit, press the STOP button to stop
playback then press the POWER button to switch off the unit. Gently
take out the MP3 player from the docking station.
Listening To An External Audio Source
The unit provides the auxiliary audio signal input for the connection of an
external audio device. You may connect an audio cable (not included) with
3.5 mm stereo plug to the AUX IN Jack located at rear of the unit. Connect
the other end of the cable to a Line Out Jack or Headphone Jack of your non-
dockable MP3 player, CD player and older, non-dockable iPods then listen to
your external source through the speakers of this system.
1. Connect an audio cable (not included) with 3.5 mm stereo plug to the
AUX IN Jack located at rear of the unit.
2. Connect the other end of the cable to a Line Out Jack or Headphone Jack
of your external audio device.
3. Turn on the external audio device.
4. To select auxiliary audio input, press the FUNCTION button repeatedly
until AUX mode is reached. The display will show the “AUX” indicator.
5. The volume level can now be controlled through the main unit. Operate all
other functions on the auxiliary device as usual.
12 13
NOTE:
(1) If you connected the Line Out Jack of your external device then you only
need to adjust the volume control of this unit.If you connected the
Headphone Jack of your external device then you may need to adjust
both the volume control of your external device and the volume control
of this unit to find the most desirable volume setting.
(2) Press the POWER button to turn off the unit when you finish listening.
Don't forget to switch off the power of your external device as well.
Specifications
Power Supply
Power Adaptor :
Input:
AC 120V ~ 60 Hz (For USA)
AC 230V ~ 50 Hz (For EU)
AC 100V ~ 50/60 Hz (For Japan)
AC 240V ~ 50Hz (For Australia)
Output:
DC 10V / 1400mA
Battery Back-up for Clock: DC1.5V “AAA” (UM-4) Battery x 2 (not included)
Frequency Range
USA's Radio Broadcast System AM 520 – 1710 kHz, 10kHz tuning step
FM 87.5 – 108 MHz, 0.1MHz tuning step
EU's Radio Broadcast System AM 522 – 1620 kHz, 9kHz tuning step
FM 87.5 – 108 MHz, 0.05MHz tuning step
Japan's Radio Broadcast System AM 522 – 1629 kHz, 9kHz tuning step
FM 76.0 – 108 MHz, 0.1MHz tuning step
Australia's Radio Broadcast System Same as EU's system
Do not subject the unit to excessive force, shock, dust or extreme temperature.
Do not tamper with the unit's internal components.
Clean your unit with a damp (never wet) cloth. Solvent or detergent should
never be used.
Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
Keep your unit away from heating appliances and sources of electrical noise
such as fluorescent lamps or motors.
Resetting the Unit
If the unit is subjected to a severe power surge or electric shock, it is possible
that the internal microcontroller may “lock up” and the unit will not respond to
any commands from the top panel controls.
1. In this event, unplug and then reconnect the AC power plug into the wall
outlet.
2. Use a straightened paper clip, toothpick, or similar blunt object to press the
RESET button located at rear of the main unit (see figure below). The reset
operation clears the system memory and all of your previous settings will
be erased.
Caution: DO NOT use a sharp, pointed object to press the RESET button.
It may damage the reset switch inside the unit.
RESET
AUX
DC 10V
EXTERNAL FMANT
RESET button
Care and Maintenance
14 15
THE SPECIFICATION AND EXTERNAL APPEARANCE OF THE
SET ARE SUBJECT TO CHANGE WITHOUT PRIOR NOTICE.
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Daewoo TC-656B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Daewoo TC-656B in de taal/talen: Engels als bijlage per email.

De handleiding is 0,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info