7
CONTROLS
SETTING THE CLOCK
When the oven is first plugged in, the display will flash “:0”. If the AC power ever goes off, the
display shows “:0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once
more.
This is a 24 hour clock system.
3. Enter the correct time of day by touching the time set
pads in sequence.
4. Touch the CLOCK pad.
NOTE: If you attempt to enter an incorrect time, the time will not be set and it will return to previous
status. Touch the CLOCK pad and re-enter the time.
The display stops blinking, and the colon
starts blinking. If you selected 12 hour clock
system, this digital clock allows you to set
from 1:00 to 12:59. If you selected 24 hour
clock system, this digital clock allows you to
set from 0:00 to 23:59
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of
alternating defrost and stand times by cycling on and off.
When you push the START button, the DEF indicator starts blinking to show the oven is in the DEFROST
mode. The display counts down the time to show you how much defrosting time is left in the DEFROST
mode. Halfway through defrosting time, turn over, break apart and or redistribute the food.
1. Touch the DEFROST pad.
2. Touch the time set pads for the
desired defrosting time.
3. Close the door.
4. Push the START button.
The DEFROST indicator lights and “:0” is
displayed.
The display will show what you touched
Note : Your oven can be programmed for
59 minutes 90 seconds(59 : 90)
