7
WATTAGE OUTPUT CHART
• The power - level is set by touching the POWER pad. The chart shows the display, the power level and
the percentage of power.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1. Plug power supply cord into a standard 3 - pronged 20 Amp, 120V AC 60Hz power outlet.
2. After placing the food in a suitable container, open the oven door and put it on the glass tray.
2. The glass tray and roller guide must always be in place during cooking.
3. Shut the door. Make sure that it is firmly closed.
1
The oven light is on only when the micro-
wave oven is operating.
2
The oven door can be opened at any time
during operation by pushing the door release
button on the control panel. The oven will
automatically shut off.
3
Each time a pad is touched, a BEEP will
sound to acknowledge the touch.
4
The oven automatically cooks on full power
unless set to a lower power level.
5
The display will show “ HAVE A NICE
COOKING TIME PRESS CLEAR ” when the
oven is plugged in.
6
Time clock returns to the present time when
the cooking time ends.
7
When the STOP/CLEAR pad is touched
during the oven operation, the oven stops
cooking and all information retained.
To erase all information (except the present
time), touch the STOP/CLEAR pad once
more. If the oven door is opened during the
oven operation, all information is retained.
8
If the START pad is touched and the oven
does not operate, check the area between
the door and door seal for obstructions and
make sure the door is closed securely.
The oven will not start cooking until the door
is comletely closed or the program has been
reset.
Make sure the oven is properly installed and
plugged into the electrical outlet.
Touch POWER pad Power level (Display)
Approximate Percentage
of Power
once HIGH 100%
twice PL-9 90%
3 times PL-8 80%
4 times PL-7 70%
5 times PL-6 60%
6 times PL-5 50%
7 times PL-4 40%
8 times PL-3 30%
9 times PL-2 20%
10 times PL-1 10%
11 times PL-0 0%
