6
Plug power supply cord into 230V AC 50Hz
power outlet.
After placing the food in a suitable container,
open the oven door and put it on the glass tray.
The glass tray and roller guide must always be
in place during cooking.
Close the door. Make sure that it is firmly
closed.
The oven door can be opened at any time
during operation by pulling the door. The oven
will automatically shut off. To restart the oven,
close the door and then push the START pad.
The oven automatically cooks on full power
unless set to a lower power level.
The display will show “ : 0” when the oven is
plugged in.
Time clock returns to the present time when the
cooking time ends.
When the STOP/CLEAR pad is pushed during
the oven operation, the oven stops cooking and
all information retained. To erase all
information(except the present time), push the
STOP/CLEAR pad once more.
If the oven door is opened during the oven
operation, all information is retained.
If the START pad is pushed and the oven does
not operate, check the area between the door
and door seal for obstructions and make sure
the door is closed securely. The oven will not
start cooking until the door is completely closed
or the program has been reset.
NOTE : When using the GRILL or COMBI
mode;
• Do not open the door so often, the temperature
inside the oven decrease and the cooking may
not be completed in setting time.
• Never touch the oven window and metal
interior of the oven when taking food in and out,
because the temperature inside the oven and
door is very high.
• When using these modes, be careful as the
tray will be hot to touch, use oven gloves or pot
holders while handling tray.
OPERATION PROCEDURE
This section includes useful information about oven operation.
1
2
3
4
5
6
7
8
9
10
Make sure the oven is properly installed and
plugged into the electrical outlet.
WATTAGE OUTPUT CHART
•
The power-level is set by pushing the Power pad. The chart shows the display, the power level and the
percentage of power.
once P-HI 100%
twice P-90 90%
3 times P-80 80%
4 times P-70 70%
5 times P-60 60%
6 times P-50 50%
7 times P-40 40%
8 times P-30 30%
9 times P-20 20%
10 times P-10 10%
11 times P-00 0%
Push
the Power
pad
Power level (Display) Approximate Percentage of Power
