19
1. Open the door.
• Oven stops operating.
• You can restart the oven by closing the door and pressing the START/SPEEDY COOK button.
2. Press the STOP/CLEAR button.
• Oven stops operating.
• If you wish to cancel the cooking settings, press the STOP/CLEAR button again.
TO STOP THE OVEN WHILE THE OVEN IS OPERATING
If you see arcing, press STOP/CLEAR button and correct the problem.
Arcing is the microwave term for sparks in the oven. Arcing is caused by:
• Metal or foil touching the side of the oven.
• Foil not molded to food (upturned edges act like antennas).
• Metal, such as twist-ties, poultry pins, or gold rimmed dishes, in the microwave.
• Recycled paper towels containing small metal pieces being used in the microwave.
ARCING
ABNORMAL MESSAGE
• If the inside temperature of the oven is higher than expected or the
temperature sensor doesn't work properly, “Err 2” message will be
shown in the display.
• Unplug the power and call our technical service.
• When the temperature sensor is disconnected, “Err 3” message
will be shown in the display.
• Unplug the power and call our technical service.
STEAM CLEANING
1. Press the STEAM CLEANING button. The STEAM indicator ( ) lights.
The oven heats up for 15minutes.
When heating up is complete the "Door Open" blinks on the display.
You may remove the mug cup and use the moisture in the oven to clean the
inside of oven cavity.
2. If you clean the inside of the oven and close the door within 10minutes, the
cooling fan will start to dry the oven for several minutes.
Note: Prior to cleaning the inside of oven, be alert that the bottom heater is hot due to the 15minute-heatup time.
REMINDER MODE (Function to remind cooking complete)
To remind you that you have food in the oven, the oven will beep once a minute until you either open the oven door or press any button.
