Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash compartment in the detergent case. Softener
should be below the ‘MAX’ level.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
• The LED shows only '---' and all Program Lights turn on.
Select the ‘Bubble Shower’ program using program selection dial.
• Washing temperature '40'°C, spin '800' rpm and rinse '3' times are selected
automatically.
• If you want to change washing temperature, spin velocity or options(Rinse+,
Water+, Time Delay, Super Express), press each button.
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
the appliance starts washing.
23
* BUBBLE SHOWER PROGRAM
Note
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and
press the button you want.
• 'Cold', '20'°C, '40'°C, '60'°C and '95'°C washing temperatures are selectable with Bubble Shower program.
•
'Rinse+' and 'Water+' and ' Time Delay' and 'Super Express' options are selectable with Bubble Shower program.
Caution!
• If you select washing temperature '95'°C, some cold water is supplied before the drain of main wash. This
is to protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead
of directly draining it. Therefore this is not a malfunction. (Be careful with the draining water, since it can be
still hot although the temperature is lowered.)
1
2
3
4
