17
Put the laundry in the drum. Put detergent and softener into the detergent case.
Then close the door.
• Put detergent into the main wash and prewash compartments in the detergent
case. Softener should be below the ‘MAX’ level.
• Put detergent into the prewash compartment only if you want to add Pre-Wash
option.
• When you want to use bleach, put it into the main wash compartment with
detergent.
Press the Power button.
• The LED shows only '---' and all Program Lights turn on.
Select the ‘Baby Care’ program using program selection dial.
• Washing temperature '95'°C , spin '400' rpm and rinse '3' times are selected
automatically.
• If you want to change washing temperature, the spin velocity or options (Pre-Wash,
Rinse+, Water+, Time Delay), press each button.
Press Start/Pause button.
• The Door is locked. By sensing the weight of laundry and supplying wash water,
the appliance starts washing.
* BABY CARE PROGRAM
Note
• If you want to change the setting during operation, press the Start/Pause button to hold the operation and
press the button you want.
• 'Cold', '20'°C, '40'°C, '60'°C and '95'°C washing temperatures are selectable with Baby Care program.
• More than '800'rpm of spin velocity is not selectable with Baby Care program in order to protect damage
on laundry.
• 'Pre-Wash' and ‘Rinse+’ and 'Water+' and 'Time Delay ' options are selectable with Baby Care program.
• The appropriate amount of laundry for Baby Care program is below 2.0kg.
Caution!
• If you select 'Baby Care' program, some cold water is supplied before the drain of main wash. This is to
protect the user from the hazard of burn injury by lowering the temperature of hot wash water instead of
directly draining it. Therefore this is not a malfunction. (Be careful with the draining water, since it can be still
hot although the temperature is lowered.)
1
2
3
4
