451541
19
Verklein
Vergroot
Pagina terug
1/53
Pagina verder
LCD TELEVISION
INSTRUCTION MANUAL
Helpline Number: 0870 100 2525
DLT-26C2
DLT-26C3
DLT-32C2
DLT-32C3
DLT-32C5
DLT-32C6
DLT-32C7
DLT-37C3
DLT-37C7
GB
2
Caution
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to
alert the user to the presence of uninsulated dangerous voltage within the product’s en-
closure that may be of sufficient magnitude to constitute a risk electric shock.
The exclamation point within an equilateral triangle is intended to alert the user
to the presence of important operating and servicing instructions in the litera-
ture accompanying the appliance.
WARNING:
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE.
CAUTION :
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
DISPOSAL OF USED ELECTRICAL & ELECTRONIC EQUIPMENT
(Europe only)
The meaning of the symbol on the product, its accessory or packaging indi-
cates that this product shall not be treated as household waste. Please, dispose
of this equipment at your applicable collection point for the recycling of elec-
trical & electronic equipments waste. In the European Union and Other Euro-
pean countries which there are separate collection systems for used electrical
and electronic product. By ensuring the correct disposal of this product, you will
help prevent potentially hazardous waste to the environment and to human
health, which could otherwise be caused by unsuitable waste handling of this
product. The recycling of materials will help conserve natural resources. Please
do not therefore dispose of your old electrical and electronic equipment with
your household waste. For more detailed information about recycling of this
product, please contact your local city office, your household waste disposal
service or the shop where you purchased the product.
3
Important
Safeguards
Please read the following safeguards for your TV and retain for future reference.
Always follow all warnings and instructions marked on the television.
1. Read, Retain and Follow All Instructions
Read all safety and operating instructions before operating the TV. Retain them safely for future reference.
Follow all operations and instructions accordingly.
2. Heed Warnings
Adhere to all warnings on the appliance and in the operating instructions.
3. Cleaning
Unplug the TV from the wall outlet before cleaning. Do not use liquid, abrasive, or aerosol cleaners. Clean-
ers can permanently damage the cabinet and screen. Use a lightly dampened cloth for cleaning.
4. Attachments and Equipment
Never add any attachment and/or equipment without approval of the manufacturer as such additions may result in
the risk of fire, electric shock or other personal injury.
5. Water and Moisture
The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such
as vases, shall be placed on the apparatus.
6. Setting
Do not place this TV on an unstable cart, stand or table. Placing the TV on an unstable base can cause the
TV to fall, resulting in serious personal injuries as well as damage to the TV. Use only a cart, stand, bracket
or table recommended by the manufacturer or salesperson.
7. Ventilation
Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the TV and to protect
it from overheating. Do not cover the ventilations openings in the cabinet and never place the set in a confined space
such as built-in cabinet unless proper ventilation is provided. Leave a minimum 10 cm gap all around the unit.
8. Power Source
This TV should be operated only from the type of power source indicated on the marking label. If you are not sure of
the type of power supplied to your home, consult your appliance dealer or local power company.
9. Grounding or Polarization
This TV is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This
plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet.
Do not defeat the safety purpose of the polarized plug. A warning that an apparatus with CLASS I construction shall
be connected to a MAINS socket outlet with a protective earthing connection.
10. Power-Cord Protection
Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed
upon or against them, paying particular attention to cords at plugs, wall outlets, and the point
where they exit from the TV. MAINS plug is used as the disconnect device, the disconnect device shall remain read-
ily operable.
11. Lightning
For added protection for this TV during a lightning storm, or when it is left unattended and unused for long periods
of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the
TV due to lightning and power-line surges.
4
EXAMPLE OF ANTENNA GROUNDING
Antenna lead in wire
Antenna discharge unit
(NEC section 810-20)
Grounding conductors
(NEC section 810-21)
Ground clamps
Power service grounding
Electrode system
(NEC art 250, part h)
Ground clamp
Electric
Service
Equipment
NEC — national electrical code
Important
Safeguards
12. Power Lines
An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with
them might be fatal.
13. Overloading
Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock.
14. Object and Liquid Entry
Never push objects of any kind into this TV through openings as they may touch dangerous voltage points or short-
out parts that could result in fire or electric shock. Never spill liquid of any kind on or into the TV.
15. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
TV, be sure the antenna or cable system is grounded so as to
provide some protection against voltage surges and built-
up static charges.
Section 810 of the National Electric Code, ANSI /NFPA No. 70-
1984, provides information with respect to proper ground-
ing of the mast and supporting structure, grounding of the
lead in wire to an antenna discharge unit, size of grounding
conductors, location of antenna discharge unit, connection
to grounding electrodes, and requirements for the grounding electrode.
16. Servicing
Do not attempt to service this TV yourself as opening or removing covers may expose you to dangerous voltage or
other hazards. Refer all servicing to qualified service personnel.
17. Damage Requiring Service
Unplug the TV from the wall outlet and refer servicing to qualified service personnel under the following conditions:
(a) When the power-supply cord or plug is damaged.
(b) If liquid has been spilled, or objects have fallen into the TV.
(c) If the TV has been exposed to rain or water.
(d) If the TV does not operate normally by following the operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to restore the TV to its normal operation.
(e) If the TV has been dropped or the cabinet has been damaged.
(f) When the TV exhibits a distinct change in performance - this indicates a need for service.
18. Replacement Parts
When replacement parts are required, be sure the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, elec-
tric shock or other hazards.
19. Safety Check
Upon completion of any service or repair to the TV, ask the service technician to perform safety checks to determine
that the TV is in safe operating condition.
20. Heat
The product should be situated away from heat sources such as radiators, heat registers, stoves, or
other products (including amplifiers) that produce heat.
21. Disconnection
Please place the TV set in such a way that the main plug can be easily disconnected.
5
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the users own safety, and the proper operation of the product.
WARNING
Ignoring or disregarding the contents of this section and im-
proper operation of the product may result in the persons death
or serious injury.
In case of an accident, please unplug the unit from the outlet immediately.
To reduce the risk of electric shock, do not remove cover or back.
No user -serviceable parts inside. Refer to qualified service per-
sonnel for repair.
Do not put any object that contains water - such as flowerpot -
near to the unit. The water may penetrate into the unit, and be a
cause of fire or hazardous electric shock.
To prevent fire and damages to the product, unplug the unit
from the outlet during lightning storm, or when it is left unat-
tended and unused for a long period of time.
Do not put on or use the product near water and moisture-such
as in a bathroom, washbowl, etc. It may be a cause of fire and
electric shock hazards.
Slots and openings in the case are provided for ventilation to ensure
reliable operation of the product. Never put in any item-such as a
coin, paper, match- through these openings since it may touch dan-
gerous voltage points that could result in fire or shock hazard.
Do not let children hang on or climb on the product since it may
be a cause of serious injury.
Hold the plug when unplugging the unit from the outlet. The cord
may cause fire or electric shock if damaged.
Do not cause the product to lean or put it in an unstable place
since it may cause a serious injury to a person, as well as damage
to the product if it falls.
6
Warning
This section must be read carefully and followed by the user prior to the operation of the product.
The manual states important instructions for the users own safety, and the proper operation of the product.
CAUTION
Ignoring or disregarding the contents of this section and im-
proper operation of the product may result in the persons death
or serious injury.
Please keep the users manual in a safe place for future reference.
Do not put volatile substance-such as benzene,
naphtha- near the product since it may cause
a change in the products colour.
Do not spill water or drop the remote controller
since it may be a cause of malfunctioning.
Do not view the TV too closely since it may
cause damage in your eyesight.
Refer servicing to qualified service personnel
for cleaning at least once a year since dust in-
side the TV set may be a result or fire and mal-
functioning of the product.
Do not cover the top of the television set. Venti-
lation will be prevented, and it may be a cause of
fire if the product is internally overheated.
The product should be situated away from any
heat source-such as radiators, heat registers,
stoves, or other products that produce heat.
Do not put on any heavy item on the power
cord since it may result in fire or hazardous
electric shock if the cord is damaged.
Please be advised of electric wires and ca-
bles when installing the antenna. It may be
a cause of hazardous electric shock and fire
if the antenna touches or falls on the electric
wire; thus, it must be installed firmly, and far
away from the cables.
Unplug the power from the outlet and all the
related connections from the unit to prevent
electric shock. At least two people must work
together to move the TV set when transport-
ing to prevent the TV from falling, and conse-
quently, any serious injury or damage.
Do not touch the power cord with moistur-
ized or wet hands when plugging to or unplug-
ging from the outlet since it may be a cause
of electric shock.
Do not expose the product to a dusty or mois-
turized place since it may be a cause of mal-
functioning.
7
Table of
Contents
Installation and Maintenance
Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Video Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Camcorder & Video Game Connection. . . . . . . . . . . . . . . . . . . . 13
DVD Player Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
STB (Set Top Box) Connection . . . . . . . . . . . . . . . . . . . . . . . . . 15
PC Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Cable TV Broadcasting Connection . . . . . . . . . . . . . . . . . . . . . . 18
Connect with the Dolby Digital AMP . . . . . . . . . . . . . . . . . . . . . 19
Name of Each Part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Basic Guide
Parts of the Remote Controller . . . . . . . . . . . . . . . . . . . . . . . . . 22
Method To Use Basic Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
To Watch TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting Up TV Stations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
DVB Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Selection of AV and Multimedia Input Signal . . . . . . . . . . . . . . . . 37
Application Guide
Screen Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Sound Adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Selection of Language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Adjustment of Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Other Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Teletext. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
Standard of Product . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
8
Supplied
Accessories
Make sure that the following accessories are provided with the product.
AC cord Instruction manual
P
R
P
R
Cable holder
(Except C2 Series)
Cover Bottom
- When you install wall mounting you set up cover bottom like
upper picture.
The method of wire arrangement
1. Assemble the cable holder enclosed on the back of TV.
(PICTURE1)
(ASSEMBLY METHOD: After you push the
„A”(prominence part of cable holder) in the hole, rotate
the cable holder clockwise as an angle of 90°. You can
separate in reverse order of assembly.)
2. Open the cable holder. (PICTURE 2)
( you can open the cable holder that press and push „B”
part.)
3. After arrange lines with the cable holder, lock the „B”
again. (PICTURE 3)
Remote controller Batteries
9
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Antenna
Connection
Indoor Antenna Connection
1. Connect the feeder cable of the antenna to the combining adapter.
WHEN THE IMAGE IS NOT CLEAR : Unclear screen image and bad reception may be a cause of wrong antenna con-
nection. Be sure to check its direction and place when installing.
2. Connect the combining adapter to the antenna input at the left side of the TV set.
WHEN USING THE COMBINING ADAPTER : You may obtain the combining adapter at your closest Service Cen-
tre.
Back of the tv set
Antenna Input
combining adapter
indoor aerial
10
Antenna
Connection
CTV Antenna Connection
Such community TV Antenna installation may be found in most of co-op apartments.
When a coaxial cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it to the right.
Antenna socket at the left side of the TV set
Antenna socket on the wall
ANT/CABLE
When a feeder cable is used : Plug the coaxial cable to the antenna socket, and fix it firmly by turning it
to the right.
Antenna socket on the wall
Antenna socket at the left side of the TV set
ANT/CABLE
Feeder cable connection with the combining adapter
11
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Antenna
Connection
Outdoor Antenna Connection
Outdoor Antenna connection-such as VHF or/and UHF-may be necessary for installation at private houses.
Single Antenna Connection
VHF Antenna
UHF Antenna
Back of the tv set
ANT/CABLE
Separate Antenna Connection.
ANT/CABLE
ANTENA combining Adapter
(Separate purchase)
In case of coaxial cable
In case of feeder cable
VHF Antenna
UHF Antenna
12
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
O
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Back of the tv set
VIDEO
Video
Connection
Connecting with an External Source
You may connect an S-Video input to enjoy clearer and brighter picture images. You can make the connection with
the AV3 input.
Note :
If S-video and RCA jack are connected the same time, The TV set will only detect the S-Video
mode.
If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is rec-
ommended for better picture quality.
Connecting with SCART VIDEO
1. Prepare the scart lead for picture / sound.
2. Connect the SCART input / output terminal of video with the SCART1(AV1), SCART2(AV2), input/output terminal of TV.
3. Turn on the video, Insert the video cassette, and press the “PLAY” button.
Note :
• SCART1 has CVBS/RGB input and RF output. It is used to connect a STB, VCR and DVD.
• SCART2 has CVBS input. It is used to connect a STB, VCR and DVD.
S-Video
13
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Camcorder & Video
Game Connection
Watching the Camcorder Recording on TV
1. Prepare the S-video and RCA connector.
2. These connectors connect to S-video or AV 3 as shown in the picture below.
3. Turn on the TV set and camcorder/video game.
4. Select AV3/S-video mode, using the ” AV”button of the Remote controller or button of the TV set.
Back of the tv set
Video game
Camcorder
Note :
If S-video and RCA jack are connected at the same time, the TV set only detects the S-Video
mode.
* If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is rec-
ommended for better picture quality.
14
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
DVD Player
connection
When connecting with a component cable and Euro SCART cable
Back of the tv set
DVD
Note :
When you connect with the component video, please check the colour of the cable between the DVD
and TV set.
When connecting with a S-VHS cable and RCA cable
Note :
If S-video and RCA jack are connected at the same time, the TV set will only detect the S-Video mode.
If your AV device has both Video OUT terminal and S-Video OUT terminal, the S-Video connection is recommended
for better picture quality.
Back of the tv set
DVD
15
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
STB(Set Top Box)
Connection
When connecting with a HDMI cable
Back of the tv set
Set Top Box
When connecting with a component cable
Set Top Box
Back of the tv set
16
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
PC
Connection
When connecting with PC(D-Sub) cable.
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Connect between PC and TV set using the D-sub and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. Select PC mode by pressing the “MULTIMEDIA button on the remote control or ” button of the TV set.
Back of the tv set
PC
When connecting with a HDMI cable.
1. First adjust resolution of the PC. (Refer to table in page 17.)
2. Connect between PC and TV set using the HDMI and Audio cable as shown in the picture below.
3. Turn on the PC and TV set.
4. select HDMI mode by pressing the “MULTIMEDIA button on the remote control or ” button of the TV set.
PC
Back of the tv set
Note :
If the graphic card of the PC only supports a DVI signal, you must connect the Audio cable as shown
in the picture upper.
17
PC
Connection
PC CONNECTION NOTES:
1) The resolution of the TV set is best at 1360(6) x 768(WXGA).
2) If there is a [Vertial Frequency] setting menu in the [Display] Menu of the PC, adjust the frequency to
60Hz.
3) If the PC resolution is too high, it may be hard to detect signals. Select a suitable resolution.
4) HDMI input port receives only digital Signal.
5) Depending on the graphic card when you plug & unplug the HDMI connection the screen may not dis-
play correctly. Restart the computer if this happens.
6) Depending on graphic card, problems like no signal delected or line noises can happen. If these problems
happen contact the graphic card company for help.
Multi input resolution available in LCD TV.
Resolution V-freq HDMI PC(D-Sub) Component Standard
640 X 480
60Hz o o x
72Hz o o x
75Hz o o x VESA Standard
800 X 600
60Hz o o x VESA Standard
72Hz o o x VESA Standard
75Hz o o x
1024 X 768
60Hz o o x VESA Standard
70Hz o o x VESA Standard
75Hz o o x VESA Standard
1360(6) x 768
60Hz o o x
75Hz o o x
720 X 480 60Hz o o o
720 X 576 50Hz o o o
1280 X 720
50Hz o o o
60Hz o o o
1920 X 1080i
50Hz o x o
60Hz o x o
720 X 480i 60Hz x x o
720 X 576i 50Hz x x o
Note :
When you connect with component, D-Sub, and HDMI, you must check the input resolution of external devices.
1280 X 720 mode is commonly used for Component.
So if this mode is used at PC mode, the screen can be enlarged.
18
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Cable TV
Broadcasting
Connection
External Input Connection Source
Watching cable television is only possible after you have subscribed to the local broadcasting company and installed
a cable receiver. You may make the connection to either the Component input or SCART input AV1 or AV2.
Cable TV
Broadcasting
Station
Input
CATV Receiver
Antenna Input Connection
Watching cable television is only possible after you have subscribed to the local broadcasting company and
installed a cable receiver.
Coaxial cable
Cable TV
Broadcasting
Station
Input Output Coaxial cable
ANT/CABLE
CATV Receiver
Back of the tv set
19
I
N
P
U
T
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Connect with the
Dolby Digital AMP.
If you connect the optical output to a Dolby digital AMP, you can listen to better sound.
Optical output
Dolby Digital AMP
L Woofer Centre R
Surround L Surround R
Back of the tv set
20
Front / Side Panel
Buttons on the TV set have the same functions as those of the remote controller.
Control Key Buttons.
TV/VIDEO Button : Each time you press this button, the TV will cycle through:
TV / AV1 / AV2 / AV3(S-Video) / PC/HDMI / COMPONENT.
MENU Button : Use this button to enter and exit the MENU.
VOLButtons : Use these buttons to change your TV’s volume or to move the cursor in the menu.
PR Buttons : Use these buttons to change channels on your TV or to move the cursor in the
menu.
POWER ON button : Use this button to change from TV STAND-by mode to TV ON mode.
LED Indicator : Light up red in Stand-By mode and Lights up green in TV on mode. When TV is Child Lock
mode, LED will cycle through red / off in Stand-By mode.
Remote controller signal receiver
The screen contains the remote controller signal receiving window; therefore, point the remote control-
ler towards the screen when using it.
Name of
Each Part
21
HDMI INPUT AV1 AV2
PC INPUT PC AUDIO
S-VHS
AV3 L - AUDIO - R
OPTICAL
COMPONENT
Pr
RL
Pb Y
Name of
Each Part
Side and Rear Panel
Side Panel
Rear Panel
22
PR
PR
Parts of the Remote
Controller
This remote controller is universal; thus, it may be convertible for TV, Video, CTV, etc.
1.
(MUTE) : Press this button, and the sound goes off.
Press again, and the sound returns.
2.
(POWER) : TV on/off button in Stand-By mode.
3. MULTIMEDIA : Each time you press this button, the TV will cycle
through: PC => HDMI => Component => PC
4. AV : Each time you press this button, the TV will cycle through:
TV => AV1 => AV2 => AV3/S-Video => TV
5. SLEEP : Sleep Timer setting.
SLEEP TIMER : OFF => 15 => 30 => 45 => 60 => 75 => 90 => 105
=> 120 => OFF
6. NUMBER : Press the numbers on this board, you can select PR directly
in TV mode.
Note:
When the current state is ST-BY, you can turn on the TV
using a digit key. Then, a PROGRAMME is selected accord-
ing to digit number.
7. S.EFFECT : Using this button, you can listen to the virtual sur-
round sound.
8.
: You can select sound mode in Mono, Stereo, Dual1,
Dual2, NiCAM STEREO. It works only in TV mode.
9. VOL : Adjust the volume.
10. PR : Changes program on your TV.
11. / : Move the cursor up/down in the menu.
12. / : Access and adjust item in the menu.
13. OK/SELECT : Auto Tuning Start and Manual Tuning Store.
14. EDIT : Move on edit mode directly.
Note :
This button is also for uses channel skip and teletext.
15. STILL : Press this button to freeze the picture.
16. DVB/Analog : Each time you press this button, the TV will cycle
through DVB & RF Analogue.
23
PR
PR
Parts of the remote
controller
17. MENU : Menu display button.
18. ASPECT : Select screen aspect ratio.
Auto => 16:9 => 14:9 => 4:3 => Zoom1 => Zoom2 => Auto
Note :
When current mode is multimedia ( PC, HDMI, Compo-
nent), the aspect only works as the 16:9 or 4:3 mode.
19. PICTURE : changes picture mode as follows:
Normal I => Normal II => Favourite => Normal I
20. RECALL : The present modes (TV, Video, Component, PC) and
Signal information. In TV mode, the Programme number, Sound,
and Clock.
21. TEXT : see page 49.
22. MGDI : Using this button, you can see MGDI DEMO screen.
Inserting Batteries into the Remote Control Unit
To load the batteries, turn the remote control handset over and open the
battery compartment. Insert the batteries (Two 1.5v, type AAA).
Make sure that the polarity matches with the (+) and (-) marks inside of
the battery compartment.
Note :
To avoid damage from possible battery leakage, remove the bat-
teries if you do not plan to use the remote control handset for an
extended period of time.
24
PR
PR
PR
PR
PICTURE MODE NORMAL
BRIGHTNESS 32
CONTRAST 58
COLOUR 32
SHARPNESS 32
TINT 32
COLOUR TEMP NORMAL
POSITION ACCESS EXIT
PICTURE
PICTURE MODE NORMAL
BRIGHTNESS 32
CONTRAST 58
COLOUR 32
SHARPNESS 32
TINT 32
COLOUR TEMP NORMAL
POSITION ACCESS EXIT
PICTURE
Method To Use
Basic Menu
Basic Menu
- The basic menu appears on the screen if you press the “MENU” button of the remote control.
- There are 5 items Picture, Screen, Sound, Function, and Install in the basic menu.
- Each item has sub-items under it. If the desired item is selected, the relevant sub-items are displayed upward.
1. Press the “MENU” button.
• The main menu appears if you press the “MENU” button.
2. Press the /“ button.
You may setup according to the directions on the screen
after selecting the desired item by pressing the /
button.
If the setup is completed, exit from the menu by pressing
the “MENU” button.
Picture : Adjust Mode, Brightness, Contrast, Colour, Sharpness and Tint(NTSC only) and Colour
Temprature.
Screen : Adjusts Aspect, Position (PC mode only)
Sound : Adjusts Sound Mode, Equalizer and Balance.
Function : Adjusts Language, Timer, Child Lock, MGDI Demo and OSD Halftone.
Install : Adjusts Auto Tuning, Manual Tuning, Setup and Edit.
25
PR
PR
To Watch TV
On/Off, Number, Mute, Recall, VOL, PR
Buttons with same name in the main body performs the same function.
Press the “ON/OFF” button of the front side of the set or Remote con-
troller.
The buttons of the remote control and the main body operate only
when AC power is turned on.
Note :
You can also turn on the TV using PR or digit key in the
ST-BY mode.
When pressing the Program button
Select two digits if using the number button for channel selection.
For example, to watch channel No.9,
Press the number button 0 and 9.
If pressing only number 9, it takes a longer time to select the channel.
To suddenly turn sound off
• Press the “MUTE (
)” button.
• No sound is heard if “MUTE(
)” is displayed on the screen.
Sound is heard again if you press the “MUTE (
)” button once
again.
For example, please use this button when the telephone rings or
when guest comes while watching TV.
Check of TV operation status
Pressing the “RECALL button, the status of channel or broadcast-
ing being currently watched or entry status of video component is
displayed on the screen.
26
Volume
PR 19 – – – – –
Mono
Clock 1 2 : 0 0
PR
PR
PR
PR
To Watch TV
- If AV1 terminal on TV set is connected with external device, TV will be ON at AV1 mode. Otherwise, TV will be ON at
RF mode.
1. Turning on the TV.
• Plug AC Cord into a power outlet.
The Stand By LED lamp turns on in red colour.
Press button of the main body or “POWER” button on
the remote control.
The Stand By LED lamp on the front panel begins to fliker in
red and green colour and the TV turns on.
2. Adjust program.
Select the desired program by pressing the PR button
or the number button.
3. Adjust volume.
• Sound reduces by pressing the VOL button.
• Sound increases by pressing the VOL button.
Note :
Sound mutes by pressing the “MUTE” ( ) button.
4. Turning off the TV.
Press button of the main body or “POWER” button on
the remote control.
TV turns off and the power lamp changes to red colour.
27
PR
PR
PR
PR
PR
PR
PR
PR
EDIT
POSITION
01
– – –
02
– – –
03
– – –
04
– – –
05
– – –
06
– – –
07
– – –
08
– – –
09
– – –
10
– – –
11
– – –
12
– – –
13
– – –
14
– – –
15
– – –
16
– – –
17
– – –
18
– – –
19
– – –
20
– – –
21
– – –
22
– – –
23
– – –
24
– – –
25
– – –
26
– – –
27
– – –
28
– – –
29
– – –
30
– – –
SKIP MOVE
EXIT
DELETE
PICTURE MODE NORMAL
BRIGHTNESS 32
CONTRAST 58
COLOUR 32
SHARPNESS 32
TINT 32
COLOUR TEMP NORMAL
POSITION ACCESS EXIT
PICTURE
AUTO TUNING
MANUAL TUNING
SETUP
EDIT
POSITION ACCESS EXIT
INSTALL
START COUNTRY SET
EXIT
AUTO TUNING
COUNTRY SET ITALY
PR01 PA L / SECAM
PLEASE WAIT...
Setting Up TV
Stations
Auto Tuning
- All stations that can be received are stored by this method. It is recommended that you use Auto tuning during in-
stallation of this set.
1. Press the “MENU” button to select the Install menu.
Move the selection bar to the Install menu with / but-
tons.
2. Select the Auto Tuning.
Place the selection bar on Auto Tuning and press the
button.
3. Select the country you require with the / button.
After selecting the country, To start Auto Tuning press the
“OK” button.
4. Please wait until the Edit menu appears.
If you don’t want to edit the programs now, escape from
the menu with the “MENU” button.
28
PR
PR
PR
PR
PR
PR
AUTO TUNING
MANUAL TUNING
SETUP
EDIT
POSITION ACCESS EXIT
INSTALL
PR CHANGE ACCESS
STORE EXIT
MANUAL TUNING
PR 1 PAL / SECAM
Setting Up TV
Stations
Manual tuning
1. Press the Number buttons(0~9) or the
PR
button
to select a program number you want.
2.
Locate the selection bar on the Manual tuning at the Install
menu.
• Press the “MENU” button to select the Install menu.
Move the selection bar to the Install menu with / but-
tons.
Place the selection bar on Manual Tuning and press the
button.
3. Execute Manual Tuning.
First, select PR number you want to store with / buttons
on the remote control.
A tuning screen will appear and cursor will move from left to right
/ from right to left. If you want to stop tuning press the “MENU”
button.
You should press the “OK” button to store program after the color
of system on the OSD turns to white. If you don’t want to store the
program, press /“ button to skip program.
Note :
If you are unable to get any programs using Auto Tuning because of a poor broadcasting signal, it is possible to store
the Manual tuning.
If present channel is SECAM L/L, TV set search SECAM L/L. And, if present channel is not SECAM L/L, TV set search all
channels except SECAM L/L.
You can change the Programme number in the Edit mode.
29
PR
PR
PR
PR
PR
PR
AUTO TUNING
MANUAL TUNING
SETUP
EDIT
POSITION ACCESS EXIT
INSTALL
PROGRAM
CHANNEL C 2
NAME – – – –
SYSTEM PAL
SOUND BG
FINE TUNING 0
POSITION ACCESS EXIT
INSTALL
PROGRAM
CHANNEL C 2
NAME – – – –
SYSTEM PAL
SOUND BG
FINE TUNING +2
POSITION ACCESS EXIT
INSTALL
Setting Up TV
Stations
Setup
The Setup menu shows you information as follows:
- Picture information: PAL, SECAM, and SECAM-L
- Sound information: L, DK3, DK2, DK1, I, BG
- Station name, Program number and Real channel number.
1. Searching for channels in the Setup menu
Press the PR“ buttons to select a program number you
want.
• Move to SETUP in the Install menu.
• Select the colour and sound system which you want.
Search a real channel with /“ buttons.
2. Enter a station name
• Move to SETUP in the Install menu.
Move the cursor to name by pressing / buttons.
You can enter a station name with the / and / but-
tons.
Note :
Only English is supported in this station name.
3. Fine tuning
• Move to SETUP in the Install menu.
• Move the cursor to Fine Tuning by pressing / buttons.
• Adjust the fine tuning with the / buttons.
Note :
If you are unable to get a good picture or Sound because of a
poor broadcasting signal, adjustment of the fine tuning might
improve it.
30
PR
PR
PR
PR
PR
PR
POSITION
01
– – –
02
– – –
03
– – –
04
– – –
05
– – –
06
– – –
07
– – –
08
– – –
09
– – –
10
– – –
11
– – –
12
– – –
13
– – –
14
– – –
15
– – –
16
– – –
17
– – –
18
– – –
19
– – –
20
– – –
21
– – –
22
– – –
23
– – –
24
– – –
25
– – –
26
– – –
27
– – –
28
– – –
29
– – –
30
– – –
SKIP MOVE
EXIT
DELETE
POSITION
01
– – –
02
– – –
03
– – –
04
– – –
05
– – –
06
– – –
07
– – –
08
– – –
09
– – –
10
– – –
11
– – –
12
– – –
13
– – –
14
– – –
15
– – –
16
– – –
17
– – –
18
– – –
19
– – –
20
– – –
21
– – –
22
– – –
23
– – –
24
– – –
25
– – –
26
– – –
27
– – –
28
– – –
29
– – –
30
– – –
SKIP MOVE
EXIT
DELETE
POSITION
01
– – –
02
– – –
03
– – –
04
– – –
05
– – –
06
– – –
07
– – –
08
– – –
09
– – –
10
– – –
11
– – –
12
– – –
13
– – –
14
– – –
15
– – –
16
– – –
17
– – –
18
– – –
19
– – –
20
– – –
21
– – –
22
– – –
23
– – –
24
– – –
25
– – –
26
– – –
27
– – –
28
– – –
29
– – –
30
– – –
SKIP MOVE
EXIT
DELETE
EDIT
EDIT
EDIT
Setting Up TV
Stations
Edit
The Edit menu shows you information as follows:
- Program position assignment: Program number and Station name, Real channel number.
- Skip information: Red (Skip Yes), White (Skip No).
- One can move on this edit mode directly using „EDIT” button on the remote control.
1. Deleting the program positions.
Move to EDIT in the Install menu.
Move the selection bar to the program number to delete
with the / or /“ buttons.
• Press the Delete(Yellow) button.
2. Moving the program positions
Move to EDIT in the Install menu.
Press the Move(Green) button. The program and station name
is blocked with green.
Move the green block to the wanted position using the /
or “/“ buttons.
Press the Move(Green) button again, then program is changed.
The moved program becomes to be positioned at the next
selected program with green.
Note :
The selection is canceled by pressing the Delete(Yellow)
button when the selection of the program to be moved is mis-
selected.
3. Skipping the Programs
Move to EDIT in the Install menu.
Move the selection bar to the program number you want
to skip
Press the skip (Red) button, then the colour of the program
number and channel will be changed to Red from White.
The skipped program number will be displayed as red in the
EDIT menu.
31
DVB MENU
Channel list
Favourites
Guides
Timers
Settings
Common Interface
MENU Exit
SELECT Select
1 BBC ONE I / II TV 08:50
Signal:
NOW: Breakfast 06:00 - 09:45
Next: Beat the Burglar 09:15 - 10:00
preset number Channel name
symbols
clock
now/next program title
signal level
program start
and end time
DVB Menu
DVB Menu
- Press the “MENU” button to display the main menu. then, select DVB MENU.
You may see the DVB MENU OSD. Whenever you need more information
during any DVB MENU directory, press info button then you will see
more detailed information on the screen. And in some menus, you can use
blue, yellow, red, green button.
- Those buttons function depend on which menu it is.
- This menu is activated only on digital mode.
About the information on the banner
- When you select a digital program, an information banner is displayed for a few seconds at the bottom of the screen.
Symbols description
I / II Other audio languages are availables and can be selected in Configuration (see page no. 35)
(~) The selected Favourite list number is displayed here.
32
1. BBC ONE
2. BBC TWO
3. ITV 1
4. Channel 4
5. five
6. ...
select delete edit name lock favourites
◄ ►
Function Select Channel Select Watch i More
Channel List
▲ ▼
1. BBC ONE (1) (2)
2. BBC TWO (1)
3. ITV 1 (2)
4. Channel 4 (1)
5. five (2)
6. ...
list 1 list 2 list 3 list 4 list 5
Select List Select Channel Select Add/Remove i More
Edit Favourite Lists
◄ ►
▲ ▼
Channel List
DVB Menu
- Select and Delete function is to choose or delete the channel.
- Select Edit Name function to change the channel name as you want.
Press / key to change characters.
- If you want to lock some channels for several reasons, select Lock function
and enter the password. you should remember the password.
If you forget, please do auto search again to make password back to default “0000”.
How to change default password, see page 35.
- Favourites function is the same as Favourites on DVB MENU.
So you can also setup this function on Channel List or the DVB MENU.
Favourites
33
Guides
Now / Next EPG
List Schedule EPG
MENU Exit
SELECT Select
◄ ►
▼ ▲
Navigate Schedule Select Watch i Event
Electronic Programme Guide Wed 10/11 10:00
Channels Current Event Next Event
23. bid - up.tv Bid for a Bargain live Bid for a Bargain live
25. TCM Closedown Little Off Set
26. UK Style Closedown Extreme Makeover: Hom...
27. Discovery Extreme Engineering Escape from Death Row
28. DiscoveryH&L Programmes resume at... The Allotment
30. ITV4 No information No information
32. Cartoon Nwk The Live & Times of Junip... Xiaolin Showdown
33. Boomerang Closedown Inspector Gadget
37. Quiz Call United Windom Money Mayhem
55. Ttext Holidays No information No information
60. Television X ..programmes start at 11... ..programmes start at 11...
DVB Menu
- This menu allows you to make your favourite channel list. You can make 5 favourite lists.
- Move highlight on any list (1~5). Then press Select key to make your own list.
When you press Select key, the mark (①②③④⑤) will show up on the channel name’s left side.
For example, If there is mark on ITV 2, that means ITV 2 is selected as your favourite list 3. You can make favour-
ist lists up to 5.
- After finishing, to use this function, go to Configuration (DVB MENU -> SETTING -> Configuration) and setup Fa-
vourite mode on/off. (see page 32).
Or it can also be set up by pressing LIST key.
Guides
Select each sub-menus.
Now / Next EGP
- You can check now / next program here. Move highlight up/down and
get information.
- Yellow/cyan button is for changing the schedule.
- Press Info key to see detailed information of each program
34
◄ ►
▼ ▲
Navigate Change Time Advance Day i Event
BBC ONE Wed 10/11 8:00-10:00
1. BBC ONE 8:00 CAR BOOTY
2. BBC TWO 8:30 BARGAIN HUNT
3. ITV 1 8:00 THE BILL
4. CHANNEL 4 9:00 QUEEN ELIZABETH
5. FIVE 9:30 NEWS ON FIVE
6. ITV2
8. 8
10. ITV3
13. More 4
Electronic Programme Guide Wed 10/11 8:00
◄ ►
Mode Menu Exit Select Edit Timer i More
No. Channel Name Start End Date Mode
1 BBC ONE 20:20 22:00 18/11/2005 Active
2
Programme Timers Wed 10/11 8:45
name : 1. BBC ONE
start : 20:20
end : 22:00
date : 18/07/2005
mode : weekly
DVB Menu
List Schedule EPG
- You can check program schedule here. Navigate channel by pressing up/down/right/left button.
- Press Yellow/cyan buttons to change date. Red/green buttons are for changing the time.
- Press Info key to see detailed information of each program
Timers
- If you want to watch a special program on time without having to use
the remote everyday, please setup Timers.
- At first, press select key. You will see time setup OSD. (See the right)
- You can change channel at Name.
- Setting start/end time as you want at Start / End.
- Select Mode (Once, Daily, Weekly).
- If a channel is set to change to LOCKed channel, password OSD will be
displayed before channel changing.
- To change password, go to SETTING > Configuration > Parental settings
(see page 35)
35
Setting
Configuration
Installation
MENU Exit
SELECT Select
Subtitle ON/OFF i More
◄ ►
Subtitle Off
Banner 4 sec
Favourite Mode Off
Channel List Show all
Parental Settings
Configuration
Do you want to start automatic search?
Do you want to start automatic search?
Your previous channel list will be replaced.
Your previous channel list will be replaced.
Yes
Ye s
No
No
DVB Menu
Settings
Select each sub-menu
Configuration
This has 4 sub-menus.
- Subtitle on/off (also can control this with remote control SUB TITLE but-
ton.
- Change Banner time : off - 1 sec - 2sec - 4sec - 8sec
- You can choose your favourite list (see page 32) on Favourite Mode. If it is
selected as off, all channel are shown.
- Change Channels List : Show all - TV only - RADIO only - TEXT only
- Parental Setting enables you to make individual services. DVB MENU and
Installation are protected by password. The default password for parental setting is „0000”. To change default pass-
word, select “Parental Settings using up/down buttons, and press OK/SELECT. Using number buttons enter default
password “0000”. Now select “Set Lock Key” and confirm with OK/SELECT button. Using number buttons enter new
password in to “Lock Key” field and re-enter in “Confirm field.
If you have forgot your personal password, you can reset to the default password “0000” by pressing the key se-
quence: RED - GREEN - YELLOW - CYAN.
Installation
- Automatic Search is the function to scan each
channel for services. If you cancel Automatic
Search before it is completed, the previous list
of services is used, if already stored.
36
Channel Number 44
Signal Quality: Very Good
Signal Level:
0 .. 9 Select Channel Select Search Menu Exit i More
Manual Search
PR
Common Interface
Top up TV
CI Menu
Module Information
Smart Card Information
Language
Software Download
DVB Menu
- Manual Search is the function to scan for an individual channel.
Enter the Channel number to be scanned.
- Signal Quality consists of 5 levels : none - poor - medium - good - very good
Common Interface
- This allows you to upgrade your TV set with additional features including access to extra channels (if available) us-
ing a conditional access module (eg. TopUp TV).
- If there is no CI Card in the slot, „No common interface module detected” appears on the screen.
- When you insert CI Card, „Common interface module inserted” appears on the screen. Then, you can watch pay
channel.
- If you remove CI Card from the slot, „Common interface module removed” appears on the screen, and you can’t
watch pay channel any more until you insert CI card again.
Note :
A common interface is available to connect a CAM(conditional access module) and a smartcard. Please con-
tact your service provider to get more information about these modules.
37
PR 19 – – – – –
MONO
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV1
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV3
CLOCK 1 2 : 0 0
PR 19 – – – – –
AV2
CLOCK 1 2 : 0 0
Selection of AV and
Multimedia Input Signal
When watching video, Camcorder, DVD, Cable TV with AV
- See page 12 for connection method of Camcorder and Video.
- When pressing ” button on the TV set, screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => PC => HDMI => Component => TV
1. Pressing the AV button on the remote controller.
The screen changes as follows:
TV => AV1 => AV2 => AV3/S-Video => TV
Note :
Cautions in menu setup
The menu disappears if you do not operate any button for about 25 seconds from the menu.
In the case of connecting both composite video signal and S-video signal at the AV3 terminal, the S-video signal
has priority.
• If sound signal is mono only, connect it to the L-terminal of the sound input terminal.
38
PC
CLOCK 1 2 : 0 0
HDMI
CLOCK 1 2 : 0 0
Component
CLOCK 1 2 : 0 0
Selection of AV and
Multimedia Input Signal
When connecting PC, STB, DVD with Multimedia
1. Pressing the “MULTIMEDIA button on the remote controller.
The screen changes as follows:
PC => HDMI => Component => PC
HDMI & PC mode
1. For optimum picture quality, use 1360(6)x768 computer or set top box output at a 60Hz refresh rate. Using other
formats or refresh rates may result in reduced picture quality.
2.
If the message ‘No signal’ appears on the screen, adjust the PC output to a format listed in the Multimedia Input table.
Multimedia Input Format
Resolution V-freq HDMI PC(D-Sub) Component Standard
640 x 480
60Hz o o x
72Hz o o x
75Hz o o x VESA Standard
800 x 600
60Hz o o x VESA Standard
72Hz o o x VESA Standard
75Hz o o x
1024 x 768
60Hz o o x VESA Standard
70Hz o o x VESA Standard
75Hz o o x VESA Standard
1360(6) x 768
60Hz o o x
75Hz o o x
720 x 480 60Hz o o o
720 x 576 50Hz o o o
1280 x 720
50Hz o o o
60Hz o o o
1920 x 1080i
50Hz o x o
60Hz o x o
720 x 480i 60Hz x x o
720 x 576i 50Hz x x o
Note :
• 1280 x 720 mode is commonly used for Component.
• So if this mode is used at PC mode, the screen can be enlarged.
39
PR
PICTURE MODE NORMAL I
PICTURE MODE NORMAL II
PICTURE MODE FAVOURITE
Screen Adjustment
When setting up various screen modes
- The user may select various screens designed for a good picture without adjusting the brightness, contrast or col-
our individually.
1. Pressing the “PICTURE” button.
The screen changes as follows:
Normal I => Normal II => Favourite => Normal I
The screen adjustment status changes as the following screens
are displayed sequentially whenever pressing the “PICTURE” button.
The screen returns to the mode prior to turning power off
when you power on again.
Note :
• Normal I : For a highly defined image in a normally bright room.
• Normal II : Supports softer image than Normal I.
• Favourite : Allows the user to customize settings as desired.
40
PR
PR
BRIGHTNESS 10
PICTURE MODE NORMAL
BRIGHTNESS 32
CONTRAST 58
COLOUR 32
SHARPNESS 32
TINT 32
COLOUR TEMP NORMAL
POSITION ACCESS EXIT
PICTURE
PICTURE MODE NORMAL
BRIGHTNESS 32
CONTRAST 58
COLOUR 32
SHARPNESS 32
TINT 32
COLOUR TEMP NORMAL
POSITION ACCESS EXIT
PICTURE
Screen Adjustment
When adjusting the screen to taste
- You can enjoy various screens by adjusting Brightness, Contrast, Colour, Sharpness, etc to the user’s taste.
1. Select “PICTURE” by pressing the “MENU” button.
• The menu screen appears as follows.
2. Select and adjust each item.
• Move to the PICTURE menu.
Whenever pressing the ”/ button, you can select Bright-
ness, Contrast, Colour, Sharpness and Colour Temp.
The screen appears as on the right if pressing the ”/ but-
tons after selecting items desired to adjust with the ”/
buttons.
You can adjust all items by pressing the ”/ button.
Note :
• Brightness: Adjusts the whole of screen brighter or darker.
• Contrast: Adjusts difference between brightness and darkness between objects and background on the screen.
• Colour: Adjusts colour saturation.
• Sharpness: Adjusts outline of the screen smoothly or sharply.
• Colour Temp: Changing the tone of colour:
Normal: Normal white Warm : Reddish white Cool: Bluish white
Tint actives when receiving a NTSC signal.
The adjusted levels are stored automatically in Favourite mode.
41
SCALE AUTO
SCALE ZOOM2
SCALE ZOOM1
SCALE 4 : 3
SCALE 14 : 9
SCALE 16 : 9
Screen Adjustment
Adjustment of Screen Size in TV and AV mode
- Randomly change the size of the screen.
- The AUTO screen operates when power is first turned on.
1. Pressing the ASPECT” button on the remote controller.
The screen changes as follows:
Auto => 16:9 => 14:9 => 4:3 => Zoom 1 => Zoom 2 => Auto
• Auto : This mode will display depending on the signal information of a broadcasting station.
• 16:9 : 16:9 will display a true 16:9 (anamorphic) picture with no aspect distortions.
• 14:9 : 14:9 will display a 14:9 picture at its standard 14:9 size without any stretching.
• 4:3 : General TV screen currently broadcasted.
• Zoom 1 : Screen that vertically enlarges image by 1.33 times bigger than (Normal) image.
• Zoom 2 : Screen that horizontally enlarges image by 1.33 times bigger than Zoom1 image.
Notices:
• Only 16:9 and 4:3 mode are available in multimedia(HDMI, PC, Component) mode.
WSS” mode like 16:9 and 14:9 is only available with CVBS signal.
42
PR
PR
PR
PR
PR
PR
PR
PR
PR
PR
SCALE AUTO
H-POSITION 50
V-POSITION 50
PHASE 50
CLOCK 50
AUTO-ADJUST
POSITION ACCESS EXIT
SCREEN
SCALE AUTO
H-POSITION 50
V-POSITION 50
PHASE 50
CLOCK 50
AUTO-ADJUST
POSITION ACCESS EXIT
SCREEN
SCALE AUTO
H-POSITION 50
V-POSITION 50
PHASE 50
CLOCK 50
AUTO-ADJUST
POSITION ACCESS EXIT
SCREEN
SCALE AUTO
H-POSITION 50
V-POSITION 50
PHASE 50
CLOCK 50
AUTO-ADJUST
POSITION ACCESS EXIT
SCREEN
SCALE AUTO
H-POSITION 50
V-POSITION 50
PHASE 50
CLOCK 50
AUTO-ADJUST
POSITION ACCESS EXIT
SCREEN
Screen Adjustment
Adjustment of the screen in the PC mode
1. Adjustment of the H-Position
• Move to H-Position in the Screen menu.
Press the ”/ buttons to adjust the horizontal
position of displayed image.
2. Adjustment of the V-Position
• Move to V-Position in the Screen menu.
Press the ”/ buttons to adjust the vertical position of dis-
played image.
3. Adjustment of the Phase
• Move to Phase in the Screen menu.
Press the ”/ buttons to adjust the phase to get a clear
picture.
4. Adjustment of the Clock
Move to Clock in the Screen menu.
Press the ”/ buttons to adjust the clock to fit the size of
the screen.
5. Auto Adjustment
• Move to Auto in the Screen menu.
Press the ”/ buttons to detect optimal resolution auto-
matically.
Note :
• During the Auto Adjust, you must not alter the screen on the monitor.
During the moving picture, Auto Adjust is able to incorrectly work. So you must execute Auto Adjust in
still image.
• Auto Adjust works incorrectly on a part graphic card or picture.
When Auto Adjust is not correctly working, you can adjust with H/V position, and phase.
43
PR
PR
PR
PR
SOUND MODE NORMAL
EQUALIZER
BALANCE 0
POSITION ACCESS EXIT
SOUND
SOUND MODE NORMAL
EQUALIZER
BALANCE 0
POSITION ACCESS EXIT
SOUND
3D-PANORAMA ON
Sound Adjustment
When adjusting sound to taste
- The user can enjoy various sounds by adjusting Sound Mode, Equalizer, Balance and Amp Speaker.
1. To adjust the audio equalizer
• Move to Equalizer in the Sound menu.
Select and use the relevant frequency by pressing the ”/
button.
You can adjust the degree of the frequency by using the ”/
button.
Note :
Whenever you adjust the audio equalizer, it stores in the Fa-
vourite mode.
Equalizer: High quality sound range adjustment method used
for audio product.
120Hz, 500Hz: Low sound range / 1.5KHz, 5KHz: Middle sound
range / 10KHz: High sound range
2. Select Balance Mode
• Move to Balance in the Sound menu.
Select “Balance” by pressing ”/ button, then the sound
balance of left and right speaker is Adjusted.
3. Select S.EFFECT Mode
Select either ON or OFF using „S.EFFECT” button on the re-
mote control.
Note :
3D PANORAMA: This function generates virtual surround sound
from the left and right speaker by developing the existing sur-
round system function.
44
PR
PR
MTS MONO
MTS MONO
MTS DUAL 1 MTS DUAL 2
Sound Adjustment
Multi-Sound and Stereo
1. Mono Sound Selection
During Stereo sound reception if the stereo is weak, you can switch to
MONO by pressing the
button. Then the colour of “MONO”
character will change to Red. In Mono reception the depth of sound is
improved.
• To switch back to stereo, press the
button again.
Note :
• “ only works in RF mode.
2. Adjustment of Bilingual sound
In bilingual broadcast reception, you can switch from Dual 1 to Dual 2 by
pressing the button repeatedly.
45
PR
PR
PR
PR
PR
PR
LANGUAGE
TIMER
CHILD LOCK OFF
MGDI DEMO
OSD HALFTONE 0
POSITION ACCESS EXIT
FUNCTION
LANGUAGE
TIMER
CHILD LOCK OFF
MGDI DEMO
OSD HALFTONE 0
POSITION ACCESS EXIT
FUNCTION
ENGLISH
FRANCAIS
DEUTSCH
ITALIANO
SPANISH
NEDERLAND
PORTUGUESE
SVENSKA
SUOMI
NORSK
POLSKI
ROMANA
MAGYAR
CZECH
RUSSIAN
BULGARIAN
POSITION ACCESS EXIT
FUNCTION
Selection of
Language
Selection of Language
When you first turn on the TV set, the window of language selection is displayed automatically.
1. Press the “MENU” button and select “Function”.
2. Select “Language” by pressing / button.
3. Select your desired language by pressing the /
button. Then, it will set automatically.
- In Continental Set:
The language changes as follows.
English => Francais => Deutsch => Italiano => Espanol => Ned-
erland => Portugues => Svenska => Norsk => Suomi => Pol-
ski => Romana => Magyar => Czech => Russian => Bulgarian;
- In UK Set:
The language changes as follows.
English => Welsh => Gaelic
46
PR
PR
PR
PR
CLOCK 12 : 00
WAKE UP NO
WAKE UP TIME - - : - -
WAKE UP PR 01
OFF TIMER NO
OFF TIME - - : - -
POSITION ACCESS EXIT
FUNCTION
CLOCK 12 : 00
WAKE UP NO
WAKE UP TIME - - : - -
WAKE UP PR 01
OFF TIMER NO
OFF TIME - - : - -
POSITION ACCESS EXIT
FUNCTION
Adjustment of Time
Adjustment of Time
- You must previously adjust current time in order to reserve Automatic On/Off.
1. Manual clock setting
• Move to Timer in the Function menu.
To go to the Clock, press the button.
Place the cursor to Hour / Minute with / buttons.
• Set the Hour / Minute with the / buttons.
Place the cursor to Clock with / buttons and then
press the “MENU” button to complete.
Note :
Manually set clock is not memorized any more when TV
is AC off.
2. Setting the Wake up time / Program
Move to Timer in the Function menu.
To go to the Wake Up, press the / button.
Select the Wake Up to Yes.
Set the Wake up time and Program in the same way to
the above for the Clock. The set will turn on at the at se-
lected time.
Note :
Confirm the Time is set. The Wake up time is only available
when the Time is set.
If adjusted once, the On-time continues to operate everyday
unless canceling setup or you turn the AC power off.
It is a convenient method to wake you up in the morning.
47
PR
PR
CLOCK 12 : 00
WAKE UP NO
WAKE UP TIME - - : - -
WAKE UP PR 01
OFF TIMER NO
OFF TIME - - : - -
POSITION ACCESS EXIT
FUNCTION
Adjustment of Time
3. Set up of Off Time
• Move to Timer in the Function menu.
To go to the Off Timer, press the / button.
• Select Off Timer to “Yes
Set the Off time in the same way as above for the Clock.
The set will turn off at the selected time.
Note :
This function is very convenient since the TV automati-
cally turns off at the fixed time
4. Sleep Mode
By pressing the “SLEEP” button on the remote control-
ler repeatedly, you can select one of the following set-
tings:
Sleep Timer: Off => 15 => 30 => 45 => 60 => 75 => 90 =>
105 => 120 => Off
The set will turn off after the time you select.
Note :
If an active signal is not present for about 10 minutes, the
set will automatically turn to ST-BY mode.
48
PR
PR
PR
PR
PR
PR
ON
OFF
LANGUAGE
TIMER
CHILD LOCK OFF
MGDI DEMO
OSD HALFTONE 0
POSITION ACCESS EXIT
FUNCTION
LANGUAGE
TIMER
CHILD LOCK OFF
MGDI DEMO
OSD HALFTONE 0
POSITION ACCESS EXIT
FUNCTION
LANGUAGE
TIMER
CHILD LOCK OFF
MGDI DEMO
OSD HALFTONE 0
POSITION ACCESS EXIT
FUNCTION
EXITMGDI
Other Functions
1. Setup of Child Lock
• Move to Child Lock in the Function menu.
• Select Child Lock to “On using the button
Note :
This prevents the use of the TV set without the remote
control.
If TV set is set up Child Lock, LED will cycle through red/
off for the ST-BY mode.
If the Child Lock is “On, then the set can only be switched
back on using the remote control.
2. Setup of MGDI Demo
• Move to MGDI Demo in the Function menu.
Press the button, and then screen changes as be-
low.
Press the “MENU” button, and then return to origin
screen.
Note :
One can move on MGDI DEMO menu directly using „MGDI”
button on the remote control.
3. OSD Halftone
• Move to OSD Halftone in the Function menu.
Press the button, and then the OSD’s transparency
changes from 0 to 100 by 25 (5 steps).
Press the „MENU” button, and then return to origin screen.
49
Teletext
Teletex t
SWITCHING TELETEXT ON/OFF
Press the TEXT button ( ).
The index page or the page viewed last will appear.
Press the TEXT button again to return to the TV mode.
NOTE:
Teletext works only in TV/AV mode.
COLOUR BUTTONS IN TOP/FLOF TELETEXT
A red, green, yellow and blue field is shown at the bottom of the screen.
If TOP or FLOF Teletext is transmitted by the station, pressing the corresponding colour button R,G,Y,B on the remote
controller, enables you to select the desired page easily.
SELECTING PAGES
The “NUMBER” buttons are used to enter a page number.
The selected page number appears at the top of the screen and the page appears after a short time.
The “/ buttons increase or decrease the current page number by 1.
INDEX PAGE
You can switch directly to the programme preview(with TOP text) or the overview page of the station you are cur-
rently viewing by pressing the “INDEX” button (
).
PAGE HOLD
Several sub pages can be combined under a page number and are scrolled at an interval determined by the televi-
sion station. The presence of sub pages is indicated by, for example, 3/6 beneath the time, which means that you are
looking at the 3rd page of a total of 6 pages.
If you want to look at a subpage for a longer period of time, press the “HOLD” button (
).
The HOLD symbol appears and the contents of the subpage shown are kept on the screen and no longer updated or
switched to other subpages. Pressing the “HOLD” button again, the current subpage appears.
CALLING UP SUBPAGE DIRECTLY
Pressing the “S-CODE” button (
) , “ - - - - “ appears.
Enter the subpage number that you want to call up with the “NUMBER” button, for example, the 2nd page, sequence
0002. The desired subpage will eventually be displayed on the screen and holds it there.
Meanwhile whilst you are waiting, it is possible to go back to the TV picture by pressing the T.CANCEL button ( )
on the remote and after a while, press the “T.CANCEL button again to revert back to the saved Teletext sub page.
WATCHING TV DURING TELETEXT MODE
Some pages are continually updated, for example, stock market reports, sports announcements, and the latest news.
If you want to watch television and stay informed at the same time, press “T.CANCEL button (
).
The regular programme is still visible and the updated Teletext page number appears at the top of the screen.
Pressing the T.CANCEL button again, the Teletext page appears with the updated information.
REVEAL ANSWER
This function can be used on certain pages to reveal the solution of riddles.
Press the “REVEAL button (
)to reveal a hidden answer and press again to hide it.
DOUBLING CHARACTER SIZE
Repeatedly pressing the “SIZE” button (
)doubles the character size in the following order:
Upper half of the page => Lower half of the page => Normal size => Upper half of the page
50
Troubleshooting
Symptoms and Solutions
Please check the following list prior to calling Daewoo Electronics Service Centre for assistance.
Symptom Check items
Neither picture
nor sound
- Check the contact of sockets is all right.
- Check the TV main power is on.
Picture is OK
but no sound
- Check the Volume control is not set to minimum or mute.
Sound is OK, but
no colour.
- Check the colour control and adjust it properly.
- Check the program is in colour and not in black & white.
The picture has
image.
- Check the antenna is installed correctly and if not, adjust the antenna
toward the broadcasting station.
Picture has “snow
noise”.
- Check the antenna or its connection is correct and if not, correct the
antenna fault or connection cable fault.
- Check if car traffic or neon sign disturbs the sound effect.
Stripes on
picture.
- Check the susceptible interference by other electronic devices such
as radio and television and keep magnetic or electronic devices away
from the TV.
Bad stereo or
Dual sound.
- Long distance from the station or other radio waves can generate
bad sound reception. If so, change the mode to Mono.
Remote control
does not
work.
- Check if the batteries in the Remote control are dead.
- Check if any object between IR sensor of the TV and the Remote con-
trol does not obstruct.
51
Troubleshooting
In PC mode
Symptom Check items
“UNSUPPORTED”
appears on the
screen
- Check the resolution and frequency of your PC. Then, adjust them to
optimum condition for LCD TV.
- Refer to the table of PC mode input format (If registered resolution and
frequency on the table not listed then no picture will be displayed.)
“NO SIGNAL
appears on the
screen.
- Ensure that the signal cable is firmly connected to PC and TV.
Image is not
clear.
- Adjust the PHASE control.
Image is not
centered.
- Adjust the H-POSITION and V-POSITION control.
AFTER SALES SERVICE
Do not hesitate to contact your retailer or service agent if a change in the perfomance of your product indicates that
a faulty condition may be present.
52
Standard of
Product
Screen Size 26”(66Cm) 32”(81Cm) 37”(94Cm)
Aspect Ratio 16:9
Resolution 1366 x 768 (WXGA)
Pixel Pitch 0.4215 mm 0.51075 mm 0.600 mm
Contrast Ratio 4000:1 5000:1 5000:1
Dimension (W x H x D) 676 x 530 x 230 mm 806 x 626.5 x 250 mm 940 x 720 x 328.5 mm
Power Consumption Remarked in the back of product
TV System PAL B/G, D/K, I/I, SECAM B/G, D/K, L/L, NTSC(AV)
Power Source 220 -240V~, 50/60Hz
Owing to our policy of continuous improvement, specifications may change.
DMP39
19

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Daewoo DLT-32C2 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Daewoo DLT-32C2 in de taal/talen: Engels als bijlage per email.

De handleiding is 7,86 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Daewoo DLT-32C2

Daewoo DLT-32C2 Gebruiksaanwijzing - English - 53 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info