66
Before doubting about troubles (VCR)
• “Power On” does not work.
• It does not work even in “Power On”.
• A videotape is not inputted in.
• On inputting a videotape, the tape is re-
ejected.
• A videotape is not ejected.
• A channel on video and a play screen
does not appear.
• Noise (screen noise) appears on screen.
• Noise appears on screen after recording.
• While in playing, noise appears.
• Sound and screen are irregular.
•
Sound comes out but screen does not
appear.
• Screen is irregular and stripes appears.
• "Screen Error" message is displayed in a
screen.
• While recording and playing, the top of
screen extremely waves.
• A screen is not clear.
ChecksSymptom
➤ Please check whether a power plug is inserted in an electric outlet.
➤ Please check whether a videotape is inserted in.
➤ Try to insert a plug again.
➤ Please check whether a power plug is inserted in an electric outlet.
➤ Please check whether a videotape is in.
➤ Please check whether a videotape is inserted in a right direction (a side of
transparent window should be on the upside)
➤ Have you inputted a videotape again just after the tape was ejected? Please try
it again after fully ejecting it.
➤ When a videotape forces to be ejected, the tape may not be inputted. In the
case, please pull out an outlet, and then push the tape smoothly.
➤ That’s why a safe mode to protect a videotape is operated automatically.
Please pull out the tape and input it again.
➤ In case the product is used for a long time, a videotape may not be ejected for
a film inside may be stretched. In the case, please pull out a power plug for
about 10mins and then press [EJECT] button.
➤ Please check your antenna’s connection.
➤ TV channel should be fixed on video channel .
➤ Please check your antenna’s signal whether it may be weak. In case of its
weakness, please use a frequency amplifier connected with the device.
➤ Press [TV/VCR] and then let “VCR” is displayed on the display panel.
➤ While in no use of VCR, was it turned on?
➤ While in recording a program, do you watch another channel?
➤ Select TV by pressing [TV/VCR] button on remote control.
➤ While in playing a videotape, there may happen some noise or blot in the part
of the beginning of a videotape or resuming “PAUSE”, which are not
breakdown.
➤ Please press [TRACKING +/- ] for better screen. Videotape may be poor. Try to
change it to another one.
➤ Please use a head-cleaner to clean VCR heads. VCR heads may be
contaminated.
➤ Since VCR Play signals are not stable like a TV signals, screen may be unstable
or curved while in playing. To fix the problem, please horizontal adjustment.
➤ In case videotape is the one recorded by other products or old one, stripe may
appear on the screen.
➤ Try to adjust the screen by [TRACKING+/–] button.
➤ Try to use a head-cleaner.
