147663
14
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
MODEL No. S14C4NT
S20C4NT
S21C6NT
INSTRUCTION MANUAL
COLOUR TELEVISION
Contents
Important safeguards 1
Before Operation 2
Connecting external equipment 3
Identification of Controls 5
Daily use 6
Menus 8
Teletext 14
Specifications 16
1
Important safeguards
WATER AND MOISTURE
Never install the set in the following places : In a wet
basement, bathroom. Do not place any container with
liquid on the set.
HEAT
Never place the set near heat sources.
VENTILATION
Do not cover the ventilation openings in the cabinet and
never place the set in a confined space such as a
bookcase or built-in unless proper ventilation is provided.
Leave a minimum 10cm gap all around the unit.
OBJECT ENTRY
Do not insert foreign objects, such as needles and coins,
in the ventilation openings.
LIGHTNING STRIKING
You should disconnect the set from the mains and the
aerial system during thunderstorms.
CLEANING
Unplug the set from the mains during cleaning.
AFTER MOVING THE SET
If the set is moved in a different direction, the MAIN
POWER button must be switched off for at least 15
minutes in order to take out a colour strain on the screen.
2
Before Operation
INSERTING BATTERIES INTO THE REMOTE CONTROL UNIT
Insert the batteries (two 1.5V, type AAA)
MAINS CONNECTION
Plug the mains cable into the power socket with 230V/50Hz AC.
AERIAL CONNECTION
When using an outdoor aerial, it is usually connected to the set by means
of 75 ohm.
SWITCHING ON AND OFF
Switching on
Switch the set on with the MAIN POWER button(ON/OFF), and then CH
UP or DOWN button on the front of the set.
Or button or the CH UP/DOWN button or one of the NUMBER buttons
on the remote control.
Switching off
Press button, on the remote control to return the set to its stand by
mode.
If you don't use the set for an extended period of time, turn it off with
MAIN POWER button on the set.
Battery options
3
TV AND A
TV AND A
V
V
SCART JACK A
SCART JACK A
V (BACK)
V (BACK)
Connecting external equipment
Use the TV/AV( ) button on the remote control or on the front of
the set to select one of the three options. Whenever the TV/AV
( ) button is pressed, the on-screen display will be changed as
shown: AV S-VHS TV
This is used to connect a VCR, a Camcorder, a S-VHS VCR, a PERI-TV decoder
or a video game console.
In most cases, the set changes automatically to AV when the VCR connected is in
display mode. If not, press the TV/AV
()
button on the remote control unit
or on the front of the set.
You must turn the external equipment off or press the TV/AV button to return to
the TV mode.
4
CAMCORDER
VIDEO GAME
LOCAL CONTROL
LOCAL CONTROL
RCA JACK A
RCA JACK A
V (FRONT)
V (FRONT)
Front
MAIN
POWER
BUTTON
PROGRAMME
DOWN/UP
BUTTONS
VOLUME
DOWN/UP
BUTTONS
TV/AV
BUTTON
STAND-BY
INDICATOR
REMOTE
SENSOR
VIDEO
INPUT
AUDIO
INPUT
HEAD
PHONE
OR
Connect the AV (Audio/Video) socket with an
appropriate cable to the corresponding socket
of the external equipment. Select AV mode by
pressing the TV/AV( ) button.
Press the TV/AV( ) button to return to
the TV mode.
HEADPHONE JACK
Insert the headphone plug(3,5mm) into the
headphone socket.
The sound from the speaker will be cut off.
NOTE:
NOTE: If two apparatus are connected,
one to the front AV Jack and the second to
the rear SCART Jack, you can play only
one apparatus.
The second one must be switched off.
5
Back
Identification of Controls
Scart Socket
Aerial Terminal
REMOTE CONTROL
REMOTE CONTROL
TELETEXT mode
1. POWER
2. NUMBER 0-9
3. INDEX
4. MIX
5. PAGE UP
6. SUBPAGE
7. MENU
8. PAGE DOWN
9. HOLD
10. MUTE
11. REVEAL
12. SIZE
13. CANCEAL
14. GREEN KEY
15. RED KEY
16. TV/TEXT
17. YELLO KEY
18. CYAN KEY
TV MODE
1. POWER
2. NUMBER 0-9
3. NORMAL
4. AV
5. PR(CUROSR) UP
6. VOLUME UP(CURSOR RIGHT)
7. MENU
8. PR(CURSOR) DOWN
9. VOLUME DOWN (CURSOR LEFT)
10. MUTE
11. RECALL
12. SLEEP
13. not used
14. MOVE (Edit mode only)
15. SKIP (Edit mode only)
16. TV/TEXT
17. DELETE(Edit mode only)
18. MODE(Picture System Change)
6
PROGRAMME SELECTION
PROGRAMME SELECTION
SOUND CONTROL
SOUND CONTROL
PICTURE CONTROL
PICTURE CONTROL
Direct selection
Use remote control NUMBER 0…9 buttons.
For two digits programme numbers, press the button for
the second digit within 2.5 seconds.
Up/Down moves
Use PR UP/DOWN buttons of the remote control unit or
on the front of the set.
DAILY USE
Volume adjustment
Use VOLUME UP/DOWN buttons of the remote control
unit or on the front of the set.
Mute
Get sound off by pressing the remote control
MUTE ( ) button. Then, logo ( ) is displayed.
Sound returns by pressing the same button again.
You can choose between three picture settings, using
repeatedly remote control NORMAL/OK button :
Normal I (standard hard picture)
Normal II (standard soft picture)
Favourite (you can adjust picture setting as you
want, using Picture menu).
For other adjustments : Brightness, contrast, colour,
sharpness, see Picture menu. (page 9)
7
SLEEP FUNCTION
SLEEP FUNCTION
PROGRAMME ST
PROGRAMME ST
A
A
TUS DISPLA
TUS DISPLA
Y
Y
The sleep function will switch the television to stand-by
after a set period of time.
Pressing repetitively the remote control SLEEP button,
you can enter one of the following settings :
OFF > 30 min > 60 min > 90 min > 120 min > OFF
The remaining time before TV turn-off is displayed on
programme status.
Accessed by the Remote Control RECALL button.
Programme number
Remaining time (minutes) before
TV set turns off only when sleep
function is activated.
Channel name
01 BBC1
11 : 11
SLEEP 60
Clock
*
NOTE
Language selection
Child lock, Clock setting and wake time setting are
available in features menu.
8
MAIN MENU
MAIN MENU
HOW T
HOW T
O USE SUB MENUS
O USE SUB MENUS
All menus are removed within 25 seconds if you don’t press any button.
The following is applied to all of the sub-menus.
Menus
Direct selection
Press remote control MENU button to display main
menu.
Then, you have the choice between several sub-
menus.
If you want to cancel immediately main menu,
press MENU button once more.
To select one of the sub-menus, use remote
control CURSOR buttons UP, DOWN, LEFT,
RIGHT.
To enter the selected sub-menu, press remote
control NORMAL/OK button .
Select the function you want to change using
Remote control CURSOR UP or DOWN button.
Confirm (if needed) by pressing Remote control
NORMAL/OK button .
Adjust the function using
Remote control CURSOR LEFT or RIGHT button.
Then Return to main menu pressing MENU button .
PICTURE
FEATURES
INSTALL
PICTURE MENU
PICTURE MENU
FEA
FEA
TURES MENU
TURES MENU
Enter PICTURE in the main menu.
You can select each function with the UP/DOWN buttons.
Use the LEFT/RIGHT buttons to adjust each function.
Explanation for each function will be displayed in the lower screen
whenever you select the function. (Tint control for AV NTSC only)
9
LANGUAGE
Language selection.
CHILD LOCK
Child lock prevent the use of the TV set without remote control unit.
Select this value ON or OFF:
- When switched ON: the stand-by indicator is orange lighted, child lock is
operating.
- The set can only be switched ON with the remote control unit.
CLOCK
TV clock setting.
- Note that if you turn off the set with the MAIN POWER button, the clock
setting is lost and must be reset if necessary.
- Set TV clock with remote control 0…9 NUMBER buttons, then clock starts.
WAKE TIME
Wake up function.
- The TV set turns on at the time and with the programme chosen by the
customer. This function is only available when clock is set and when TV set
is switched to stand -by mode.
- Switch "wake up" function ON/OFF with remote control CURSOR LEFT or
RIGHT button.
- Enter wake up time with remote control 0...9 NUMBER buttons.
WAKE PR
Select TV turn-on programme number.
INST
INST
ALL MENU
ALL MENU
EDIT MENU
EDIT MENU
ATSS
Automatic Tuning and Sorting System.
EDIT
Programme list edition.
SYSTEM
TV system selection.
CHANNEL
Channel number.
FREQ
Channel Frequency.
NAME
Channel name.
PROGRAM
Programme number.
STORE TO
Programme storage number.
10
PR
Programme number.
NAME
Station name.
CH
Channel number.
Skip
: programme skipped.
12
Channels order changing
Select the programme to move using remote control
CURSOR UP/ DOWN buttons.
Press the remote control
NORMAL/OK
button : the
programme appears on red and can be moved to
another place using remote control CURSOR UP/
DOWN buttons.
When required position is reached, confirm this new
position pressing the remote control
NORMAL/OK
button. Then, the programme appears again on green.
Station name entering - copying a programme to
another programme number
Use Install menu "NAME" and " STORE TO" functions
as explained in manual channel tuning paragraph.
Choose starting point
Select with "PROGRAM" function the programme from
which you want to start manual tuning.Then, the channel
number, the frequency, the name and the programme
number of this programme are displayed in the install
menu.
TV system selection
If necessary, you can modify TV system :
- Select “SYSTEM” function
- Choose between :
EURO (B/G), E/EURO (D/K) systems
Then, the programme displayed on screen is changed
to the system chosen.
Channel searching
Select "FREQ." function.
Press the remote control CURSOR RIGHT / LEFT buttons
for more than 3 seconds to start (up / down) manual
tuning.
After searching, tuning will stop automatically to the next
channel. (To stop searching press the remote control
MENU button)
MANUAL CHANNEL SETTINGS
MANUAL CHANNEL SETTINGS
* Note: If you know channel number or frequency of
channels you want to search, you can tune
directly to these channels, entering these data
directly into "CHANNEL" or "FREQ." function.
14

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Daewoo 14 c4ns bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Daewoo 14 c4ns in de taal/talen: Engels als bijlage per email.

De handleiding is 0,82 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info