Installation manual371Identify logs A to K (see fig. 8-9).2-Use the burn stains on the logs for identification.-In the overview photograph, the side glass pane is located on the right side.1Place log A over the lying burner in the positioning brackets (see fig. 8-20).1Place log B on the left side behind log A, in the two positioning brackets and on log A.1Place log C on the right side behind log A, in the positioning bracket and on log A, make sure there is 1 centimetre play between log C and the standing burner to the right (see fig. 8-20).1Place log D in the positioning bracket to the right and on log C.1Place log E against the tube of the standing burner to the right and in the positioning bracket.1Place logs F and G in front of the lying burner, in the positioning brackets.1Place log H against the tube of the standing burner to the left and in the positioning bracket.1For appliances without Eco Glow, use all chips in the wood set.1Fill the vermiculite plates with chips, spread the chips evenly, keep the sections marked in red free of chips (see fig. 8-18).1For appliances with Eco Glow, use the glow rocks, coals, 400ml of the supplied grey chips and 800ml of the black chips.2First place the Glowing embers and then the coals. Switch on the glow lighting while placing, so that the stray light can be seen directly and covered with the rocks and coals.1Spread the Glowing embers over the grid pattern and square holes in the vermiculite plate, keep the sections marked in red free (see fig. 8-19).1Spread the chips over the remaining sections, keep the sections marked in red free.1Place log I on the left side in front of log A, in the positioning bracket and on log A.Make sure there is 1 centimetre play between log I and the standing burner to the left (see fig. 8-23).1Place log J over the standing burner to the left, make sure the recess falls over the burner properly.1Place log K over the standing burner to the right, make sure the recess falls over the burner properly.2Spread the ash over the chips and/or place the glow material over the lying burner in separate tufts.3-Prevent the ash from ending up on the burners.-Only place the glow material on sections that are marked green.-The areas around the ionization and ignition should remain free from glow material (see fig. 8-15).-The glow material may affect the colour of the flame picture.2Place chips on the edge of he pane frame. Prevent chips from getting under the pane frame (see fig. 8-16 and 8-17).8-14
Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.
Product:
Spelregels forum
Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:
lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;
Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.
Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.
Abonneren
Abonneer u voor het ontvangen van emails voor uw DRU Maestro 75 RCH bij:
nieuwe vragen en antwoorden
nieuwe handleidingen
U ontvangt een email met instructies om u voor één of beide opties in te schrijven.
Ontvang uw handleiding per email
Vul uw emailadres in en ontvang de handleiding van DRU Maestro 75 RCH in de taal/talen: Engels als bijlage per email.
De handleiding is 5.63 mb groot.
U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.
Uw handleiding is per email verstuurd. Controleer uw email
Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.
Er is een email naar u verstuurd om uw inschrijving definitief te maken.
Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken
U heeft geen emailadres opgegeven
Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.
Uw vraag is op deze pagina toegevoegd
Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.