571623
15
Verklein
Vergroot
Pagina terug
1/44
Pagina verder
English
INSTALLATION MANUAL
5.16 Wood set
The appliance is supplied with a wood set.
!Caution
Strictly observe the following instructions to prevent unsafe situations:
Ø
Only ever use the supplied wood set;
Ø
Only use the glow material (see appendix 3, fig. 14) in combination with the wood set;
Ø
Place the wood set exactly as described;
Ø
Make sure the ionization and spark electrodes and the surrounding space remain free
(see appendix 3, fig. 12 and 13);
Ø
In case of a wood set, keep the air openings between the burner and the vermiculite tray completely free;
Ø
Make sure there is no vermiculite's dust on the burner.
5.16.1 Placing the wood set
The wood set consists of a number of logs (see appendix 3, fig. 15), black vermiculite (see appendix 3, fig. 12) and
chips (see appendix 3, fig. 13) .
!Caution
The figures do not always show the correct colours.
Ø
Fill the burner with vermiculite and evenly spread the vermiculite (see appendix 3, fig. 16).
!Tip
You can influence the flame picture by moving the vermiculite.
!Caution
The vermiculite should not get higher than the edge of the burner;
The burner deck has to remain covered with vermiculite in order to prevent reduction of the burner's life
span.
Ø
Identify logs A to E (see appendix 3, fig. 15)
!Caution
Log E only applies to the Lugo 80.
!Tip
Use the burn stains on the logs for identification;
When placing the logs, use the positioning cams.
Ø
Place log A behind the burner against the positioning brackets (see appendix 3, fig. 17).
Ø
Place log B over the burner on the positioning bracket of the burner. Use the recess in the burner and keep the
ignitions free for the correct position of this log (see appendix 3, fig. 18).
Ø
Place log C against the positioning bracket and on log B (see appendix 3, fig. 19).
Ø
Place log D against the positioning bracket and on log B (see appendix 3, fig. 19).
Ø
In case of Lugo 80, place log E in the positioning bracket and on log B (see appendix 3, fig. 21).
!Caution
The logs should not block the burner cartridge and the ionization pens and ignition plugs should remain free,
because:
The main burner will not ignite properly; which could result in unsafe situations;
The appliance will become filthy more quickly, as a result of soot;
The flame picture will be affected.
Ø
Fill the vermiculite tray with chips; spread the chips evenly (see appendix 3, fig. 20 (Lugo 70) and fig. 22 (Lugo 80)).
!Caution
Do not place chips on the open area around the burner and keep the ionization pens and ignition plugs free,
because:
The main burner will not ignite properly; which could result in unsafe situations;
The appliance will become filthy more quickly, as a result of soot;
The flame picture will be affected.
Ø
If required, spread the glow material over the burner.
!Caution
The areas around the ionization and ignition should remain free from glow material.
!Tip
Fasten the glow material under chips and/or wood set.
15
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DRU Lugo 70 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DRU Lugo 70 in de taal/talen: Engels als bijlage per email.

De handleiding is 4.96 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van DRU Lugo 70

DRU Lugo 70 Gebruiksaanwijzing - Nederlands - 28 pagina's

DRU Lugo 70 Installatiehandleiding - Nederlands - 44 pagina's

DRU Lugo 70 Gebruiksaanwijzing - Deutsch - 28 pagina's

DRU Lugo 70 Installatiehandleiding - Deutsch - 44 pagina's

DRU Lugo 70 Gebruiksaanwijzing - English - 28 pagina's

DRU Lugo 70 Gebruiksaanwijzing - Français - 28 pagina's

DRU Lugo 70 Installatiehandleiding - Français - 44 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info