Handleiding DJI Inspire 2 (pagina 67 van 75) (Engels)

653248

Verklein

Vergroot

Pagina terug

1/75

Pagina verder

INSPIRE 2

V1.0

2017.01

User Manual

Using this manual

Legends

Warning Important Hints and Tips Reference

Before Flight

The following tutorials and manuals have been produced to ensure you to make full use of your

Inspire 2.

1. In the Box

2. Safety Guidelines and Disclaimer

3. Quick Start Guide

4. Intelligent Flight Battery Safety Guidelines

5. User Manual

Watching all the tutorial videos and reading the Disclaimer before flight is recommended.

Afterwards, prepare for your rst ight by using the Quick Start Guide. Refer to this manual for more

comprehensive information.

Watch the video tutorials

Please watch the tutorial video below to learn how to use Inspire 2 correctly and safely:

http://www.dji.com/inspire-2/info#video

Download the DJI GO

4 app

Download and install the DJI GO 4 app before use. Scan the QR code or visit

“https://m.dji.net/djigo4” to download the app.

For the best experience, use mobile device with Android V 4.4 or above. Requires iOS 9.0 or later.

Download the DJI ASSISTANT

http://www.dji.com/inspire-2/info#downloads

Searching for Keywords

Search for keywords such as “battery” and “install” to find a topic. If you are using Adobe

Acrobat Reader to read this document, press Ctrl+F on Windows or Command+F on Mac to

begin a search.

Navigating to a Topic

View a complete list of topics in the table of contents. Click on a topic to navigate to that

section.

Printing this Document

This document supports high resolution printing.

Contents

Using this manual

Legends 2

Before Flight 2

Watch the video tutorials 2

Download the DJI GOTM 4 app 2

Download the DJI ASSISTANTTM 2 2

Product Prole

Introduction 6

Feature Highlights 6

Assemble the Aircraft 6

Preparing Remote Controller 8

Aircraft Diagram 9

Remote Controller Diagram 10

Aircraft

Flight Controller 13

Flight Mode 13

Flight Status Indicator 14

Return-to-Home (RTH) 15

TapFly 19

ActiveTrack 21

Tripod Mode 23

Spotlight Pro 23

Vision System and Infrared Sensing System 24

Flight Recorder 28

Attaching and Detaching the Propellers 28

DJI Intelligent Flight Battery 28

Remote Controllers

 RemoteControllerProle 35

Remote Controller Operations 35

Dual Remote Controllers Mode 40

Remote Controller Status LED 42

Linking the Remote Controller 43

Used with the DJI Focus 44

INSPIRE 2

User Manual

Gimbal and Camera

Camera 46

Gimbal 47

Using CINESSD 49

DJI GO 4 App

Camera 52

Editor 55

SkyPixel 55

Me 55

Flight

Flight Environment Requirements 57

Flight Limits and No-Fly Zones 57

 PreightChecklist 60

Calibrating the Compass 61

Auto Take-off and Auto Landing 62

Starting/Stopping the Motors 62

 StoptheMotorMid-ight 63

Flight Test 63

Appendix

 Specications 66

Upgrading the Firmware 70

Compliance Information 72

After-Sales Information 74

Product Prole

This chapter describes the features of

Inspire 2, instructs you to assemble the

aircraft and explains the components on

the aircraft and remote controllers.

Product Prole

Introduction

The Inspire 2 is a powerful aerial film making system with class leading agility and speed,

redundancy features for maximum reliability, and new, smart features that make capturing complex

shots easy. The camera unit is now independent from image processor so that you have the

exibility to choose the perfect gimbal and camera system for each of your scenes. Dual frequency

support in the remote controller makes the HD video downlink more efcient and more stable.

Feature Highlights

Upgraded Tapy

and ActiveTrack

commands in the DJI GO 4 app, the Inspire 2 ies anywhere

visible on-screen with a tap and tracks moving subjects effortlessly.

Flight Controller: The flight controller has been updated to provide a safer, more reliable flight

experience. A new ight recorder stores critical data from each ight. A system of visual sensors

enhance hovering precision when ying indoors or in environments where GPS is unavailable. Dual

IMUs and compasses design provides redundancy.

HD Video Downlink: The low-latency long range (up to 4.3mi (7km)) HD downlink is powered by an

en hanced version of DJI LIGHTBRIDGE

. Support of 2.4 GHz and 5.8 GHz ensures a more reliable

con nection in environments with more interference.

Camera and Gimbal: The camera unit is now independent from image processor so that you have

the exibility to choose the perfect gimbal and camera system for each of your scenes. This means

that regardless of which camera you choose, you have the same powerful processing backing

it, and when using the ZENMUSE

X5S, the ability to capture RAW videos. Lossless video (in

CinemaDNG and ProRes format), and DNG RAW photo burst shooting will be available when DJI

CINESSD

used.

Intelligent Flight Battery: The new DJI Intelligent Flight Battery features upgraded battery cells and

an advanced power management system to provide up to 25 minutes of ight with Zenmuse X5S

and 27 minutes with Zenmuse X4S.

Assemble the Aircraft

Unlocking Travel Mode

The aircraft is in Travel Mode during delivery. Follow these steps to change it to Landing Mode

before your rst ight:

1. Insert the battery pair.

2. Press the power button a minimum of ve times.

3. Unfold the landing gear to Landing Mode and power on automatically.

INSPIRE 2

User Manual

Battery must be fully charged before using it for the first time. Refer to "Charging the

Intelligent Flight Battery" for more information .

The aircraft cannot change to Landing Mode from Travel Mode with the gimbal camera

attached.

Place the aircraft on the smooth and reective surface (e.g. table or tile) before switching between

the travel modes to the landing mode.

Keep your hands away from the transformation mechanism when unfolding the landing gear.

Make sure to press the battery remove button when removing the battery.

Please follow the steps to enter Travel Mode: Continuously press the power button for at

least 5 times, and then detach the gimbal and propellers. Place the aircraft on a smooth

surface and wait the aircraft to change into Travel Mode. Then press the Battery Remove

Button to remove the batteries.

Always ensure that the DJI Gimbal Connector 2.0 on the Inspire 2 is in the right position

when mounting, otherwise the camera will not mount.

Remove the lens cap when the Zenmuse X5S is in use.

Always power off the aircraft before removing the gimbal camera.

Press the power button

a minimum of ve times

Unfold the landing gear to Landing

Mode and power on

Insert the battery

pair

5 x

Mounting the Zenmuse X5S to the

aircraft (Powering off not required)

Mounting the Zenmuse X5S to the Inspire 2

1. Remove the Gimbal Cap from the Zenmuse X5S.

2. Press the gimbal and camera release button on the Inspire 2. Rotate to remove the Gimbal Cap

from the Inspire 2.

3. Align the white dot on the gimbal to the red dot on Inspire 2 and insert the gimbal.

4. Rotate the Gimbal Lock to the locked position by aligning the red dots.

INSPIRE 2

User Manual

Preparing Remote Controller

Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown.

1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust it to t then

attach your mobile device.

2. Connect your mobile device to the remote controller with a USB cable.

3. Plug one end of the cable into your mobile device, and the other end into the USB port on the

back of the remote controller.

Attaching 1550T Quick Release Propellers

Following the steps below to attach the 1550T quick release propellers.

1. Pair the propellers and motors with arrows of the same color (red or white).

Press down the spring pad and rotate

the propeller lock until the arrows are

aligned and you hear a click.

Attach the propeller

onto the motor.

Again, rotate the propeller lock

until you hear a click.

Make sure to press down the spring pad before rotating the propeller lock.

INSPIRE 2

User Manual

Aircraft Diagram

[1] FPV Camera

[2] Forward Vision System

[3] DJI Gimbal Connector V2.0 (DGC2.0)

[4] Gimbal and Camera Detach Button

[5] Downward Vision System

[6] Extended Device Maounting Position

[7] Transformation Mechanism

[8] Control and Processing Center

(with Micro SD Card Slot)

[9] Front LEDs

[10] Propulsion System (with Motors, Propellers, etc.)

[11] Rear LEDs

[12] Intelligent Flight Batteries

[13] Power Button

[14] Battery Level Indicators

[15] Battery Remove Button

[16] Upward Infrared Sensor

[17] Aircraft Status Indicator

[18] DJI CINESSD Slot

[19] Linking Button

[20] USB Mode Switch

[21] USB Port

INSPIRE 2

User Manual

17 18 19

1615

2221

Remote Controller Diagram

[1] Power Button

Used to turn the Remote Controller on and

off.

[2] Transformation Switch

Toggle the switch up or down to raise or

lower the landing gear during ight.

[3] Return-to-Home (RTH) Button

Press and hold the button to initiate Return

to Home (RTH).

[4] Control Sticks

Controls the orientation and movement of

the aircraft.

[5] Status LED

Displays the Remote Controller's system

status.

[6] Battery Level LEDs

Displays the battery level of the Remote

Controller.

[7] Power Port

Connect to the Charger to charge the battery

of the remote controller.

[8] Mobile Device Holder

Securely mounts your mobile device to the

remote controller.

[9] Antennas

Relays aircraft control and video signal.

[10] Handle Bar

[11] Control Dial (Gimbal/FPV)

Use this dial to control the tilt of the gimbal. In gimbal’s free mode, press and hold on the C1

Button and rotate the control dial, to adjust the pan of the gimbal. To adjust the tilt of the FPV

camera, press and hold on the C2 Button and rotate the control dial.

[12] Camera Settings Dial

Turn the dial to adjust camera settings. (Only functions when the remote controller is connected

to a mobile device running the DJI GO 4 app.)

[13] Record Button

Press to start recording video. Press again to stop recording.

[14] Flight Mode Switch

Switch between P-mode, S-mode, and A-mode.

INSPIRE 2

User Manual

[15] Shutter Button

Two-stage button, press to take a photo.

[16] Pause Button

Press once to allow the aircraft to exit from TapFly, ActiveTrack and Advanced mode.

[17] Micro USB Port

Use this port to upgrade the rmware.

[18] CAN Bus

Reserved extended port.

[19] HDMI A Port

HDMI A Port is for video output.

[20] USB Port

Connection to mobile device for DJI GO 4 app.

[21] C1 Button

Customizable through the DJI GO 4 app.

[22] C2 Button

Customizable through the DJI GO 4 app.

Aircraft

This chapter describes the features of

the Flight Controller, Vision System and

the Intelligent Flight Battery.

Aircraft

Flight Controller

The Inspire 2 ight controller features several important upgrades. Safety modes include Failsafe

and Return-to-Home. These features ensure the safe return of your aircraft if the control signal is

lost. The ight controller can also save critical ight data from each ight to the on-board storage

device. The new ight controller also provides increased stability and a new air braking feature.

Flight Mode

Three ight modes are available. The details of each ight mode are found in the section below:

P-mode (Positioning) :

P-mode works best when the GPS signal is strong. The aircraft utilizes the GPS and Forward

and Downward Vision Systems to locate itself, automatically stabilize, and navigate between

obstacles. Advanced features such as TapFly and ActiveTrack are enabled in this mode.

When the Forward Vision System is enabled and lighting conditions are sufcient, the maximum

ight attitude angle is 25°. When forward obstacle sensing are disabled, the maximum ight

attitude angle is 35°.

When the GPS signal is weak and lighting conditions are too dark for the Forward and

Downward Vision Systems, the aircraft will only use its barometer for positioning to control

altitude.

Note: P-mode requires larger stick movements to achieve high speeds.

S-mode (Sport):

The aircraft is using GPS for positioning. As Forward and Downward Vision Systems are

disabled, the aircraft will not be able to sense and avoid obstacles when in Sport Mode. Ground

Station and the Intelligent Flight functions are also not available in Sport Mode.

Note: Aircraft responses are optimized for agility and speed making it more responsive to stick

movements.

A-mode (Attitude):

When neither the GPS nor the Vision System is available, the aircraft will only use its barometer

for positioning to control the altitude. Ground Station and the Intelligent Flight functions are also

not available in A-mode.

The forward Vision System is disabled in S-mode (Sport), which means the aircraft will

not be able to automatically avoid obstacles in its ight path. Be vigilant and stay clear

of nearby obstacles.

The aircraft’s maximum speed and braking distance are signicantly increased in S-mode

(Sport). A minimum braking distance of 164 feet (50 meters) is required in windless

conditions.

The aircraft’s responsiveness is signicantly increased in S-mode (Sport), which means a small

stick movement on the remote controller will translate into a large travel distance of the aircraft.

Be vigilant and maintain adequate maneuvering space during ight.

The aircraft’s descent speed is signicantly increased in S-mode (Sport). A minimum braking

distance of 164 feet (50 meters) is required in windless conditions.

Use the Flight Controller mode switch to change the ight mode of the aircraft.

INSPIRE 2

User Manual

Flight Status Indicator

The Inspire 2 comes with the Front LED, Rear LED and Aircraft Status Indicator. The positions of

these LEDs are shown in the gure below:

The Front LEDs show the orientation of the aircraft. The Front LEDs glow solid red when the aircraft

is turned on to indicate the front (or nose) of the aircraft (the Front and rear LEDs can be turned

off in the DJI GO 4 app). The Aircraft Status Indicator communicates the system status of the ight

controller. Refer to the table below for more information about the Aircraft Status Indicator.

Aircraft Status Indicator Description

Normal

Alternating red, green and yellow ashes Turning On and Self Diagnostic Testing

×4 Four yellow ashes Warming Up

Slow green ashing P-mode with GPS*

×2 Two green ashes

P-mode with Forward and Downward

Vision Systems*

Slow yellow ashing

No GPS and Forward and Downward

Vision Systems

Fast green ashing Braking

Warning

Fast yellow ashing Remote Controller Signal Lost

Slow red ashing Low Battery Warning

Fast red ashing Critical Low Battery Warning

Red ashing IMU Error

—

Solid Red Critical Error

Fast alternating red and yellow ashing Compass Calibration Required

* Green ashes slowly in P-mode and ashes quickly in S-mode.

Rear LEDFront LED

Aircraft Status Indicator

INSPIRE 2

User Manual

Return-to-Home (RTH)

Return-to-Home (RTH) function brings the aircraft back to the last recorded Home Point. There are

three types of RTH: Smart RTH, Low Battery RTH, and Failsafe RTH. This section describes these

three scenarios in detail.

GPS

Description

Home Point

If a strong GPS signal was acquired before takeoff, the Home Point is

the location from which the aircraft launched. The GPS signal strength

is indicated by the GPS icon ( displays with at least four bars). The

aircraft status indicator will blink rapidly when the home point is recorded.

The aircraft can sense and avoid obstacles when the Forward Vision System is enabled and

lighting conditions are sufcient. The aircraft will automatically climb up to avoid obstacles and

descend slowly as it returns to the home point. To ensure the aircraft returns home forwards, it

cannot rotate or y left and right during RTH while the Forward Vision System is enabled.

Failsafe RTH

The Forward Vision System allows the aircraft to create a real-time map of its ight route as it ies. If

the Home Point was successfully recorded and the compass is functioning normally, Failsafe RTH

will be automatically activated if the remote controller signal is lost for more than three seconds. The

aircraft will plan its return route and retrace its original ight route home. The aircraft will hover for

10 seconds at its current location. When it regains signal connection it will wait for pilot commands.

The Return-to-Home process may be interrupted and the pilot given control of the aircraft if the

remote controller signal connection is re-established.

Failsafe Illustration

RTH (adjustable altitude)

Fast Blinking Yellow

Height over HP<=Failsafe Altitude

1 Record Home Point

Blinking Green

3 Remote Controller Signal Lost

Fast Blinking Yellow

2 Conrming Home Point

Blinking Green

6 Landing (after hovering for 5 secs)

Fast Blinking Yellow

Signal Lost Lasts (after 3 sec.)

Fast Blinking Yellow

Height over HP>Failsafe Altitude

Elevate to Failsafe Altitude

Failsafe Altitude

Aircraft cannot return to the Home Point when GPS signal is weak ( [ ] displays less

than four bars) or unavailable.

Aircraft automatically descends and lands if RTH is triggered when the aircraft ies within a

65 feet (20 meters) radius of the Home Point. Aircraft will stop ascending and immediately

return to the Home Point if you move the left stick if the aircraft reaches 65 feet (20 meters)

altitudes or beyond during Failsafe.

The aircraft cannot avoid obstruction during Failsafe RTH if Forward Vision System is

disabled. It is important to set a suitable Failsafe altitude before each ight. Launch the DJI

GO 4 app, enter “Camera” and tap to set the Failsafe Altitude.

User cannot control the aircraft while the aircraft is ascending to 65 feet (20 meters) from the

current altitude. However, user can press RTH button once to exit ascending and regain control.

INSPIRE 2

User Manual

Smart RTH

Use the RTH button on the remote controller or tap the RTH button in the DJI GO 4 app and

follow the on-screen instructions when GPS is available to initiate Smart RTH. The aircraft will

then automatically return to the last recorded Home Point. Use the remote controller to control the

aircraft’s speed or altitude to avoid a collision during the Smart RTH process. As the aircraft returns,

it will use the primary camera to identify obstacles as far as 300m in front, allowing it to plan a safe

route home. Press and hold the Smart RTH button once to start the process, and press the Smart

RTH button again to terminate the procedure and regain full control of the aircraft.

Low Battery RTH (Can be turned off in DJI GO 4 app)

The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point

that may affect the safe return of the aircraft. Users are advised to return home or land the aircraft

immediately when prompted. The DJI GO 4 app will display a notice when a low battery warning

is triggered. The aircraft will automatically return to the Home Point if no action is taken after a ten-

second countdown. The user can cancel the RTH procedure by pressing the RTH button on the

remote controller. The thresholds for these warnings are automatically determined based on the

aircraft’s current altitude and distance from the Home Point.

The aircraft will land automatically if the current battery level can only support the aircraft long

enough to descend from its current altitude. The user can still use the remote controller to alter the

aircraft’s orientation during the landing process.

The Battery Level Indicator is displayed in the DJI GO 4 app, and is described below:

12:29

Remaining ight time

Sufcient battery

level (Green)

Battery level Indicator

Power requires

to return home

Critical Low battery level

warning (Red)

Low battery

level warning (Yellow)

Battery

Level

Warning

Remark

Aircraft Status

Indicator

DJI GO 4 App

Flight

Instructions

Low battery

level

warning

Battery power

is low. Land

the aircraft.

Aircraft status

indicator blinks

RED slowly.

Tap “Go-home” to have the

aircraft return to the Home

point and land automatically,

or “Cancel” to resume normal

flight. If no action is taken,

the aircraft will automatically

go home and land after 10

seconds. Remote controller

will sound an alarm.

Fly the aircraft

back and land

it as soon as

possible, then

stop the motors

and replace the

battery.

INSPIRE 2

User Manual

Critical Low

battery level

warning

The aircraft

must land

immediately.

Aircraft status

indicator blinks

RED quickly.

The DJI GO 4 app display

will ash red and the aircraft

will start to descend. The

remote controller will sound

an alarm.

Allow the aircraft

to descend

and land

automatically.

Estimated

remaining

ight time

Estimated

remaining ight

based on current

battery level.

N/A N/A N/A

When the Critical low battery level warning is triggered and the aircraft begins to land

automatically, push the left stick upward to make the aircraft hover at its current altitude,

giving you an opportunity to navigate to a more appropriate landing location.

The colored zones and markers on the battery level indicator bar reect the estimated

remaining ight time. They are automatically adjusted according to the aircraft’s current

location and status.

Failsafe Safety Notices

20米

The aircraft cannot avoid obstruction during the Failsafe RTH when

the Forward Vision System is disabled. Therefore, it is important to set

a suitable Failsafe altitude before each ight. Launch the DJI GO 4

app, enter Camera and tap to set the Failsafe Altitude.

20 m

If the aircraft is ying under 65 feet (20 meters) and Failsafe (including

Smart RTH, Lower Battery RTH ) is triggered, the aircraft will first

automatically ascend to 65 feet (20 meters) from the current altitude.

You can only cancel the ascending by exiting the Failsafe.

20 m

Aircraft automatically descends and lands if RTH is triggered when

the aircraft ies within a 65 feet (20 meters) radius of the Home Point.

Aircraft will stop ascending and immediately return to the Home Point

if you move the left stick if the aircraft reaches 65 feet (20 meters)

altitudes or beyond during Failsafe.

20米

Aircraft cannot return to the Home Point when GPS signal is weak

( [

] displays less than four bars) or unavailable.

20米

if you move the left stick after the aircraft rises above 65 feet (20

meters) but below the pre-set Failsafe RTH altitude, the aircraft will

stop ascending and immediately return to the Home Point.

INSPIRE 2

User Manual

Obstacle Avoidance During RTH*

Aircraft can now sense and actively attempt to avoid obstacles during RTH, provided that the

lighting conditions are adequate for the Forward Vision System. Upon detecting an obstacle, the

aircraft will act as follows:

1. The aircraft will use the primary camera to identify obstacles as far as 984 feet (300 meters) in

front, allowing it to plan a safe route home.

2. The aircraft decelerates when an obstacle is sensed at 49 feet (15 meters) ahead.

3.The aircraft stops and hover then start ascending vertically to avoid the obstacle. Eventually, the

aircraft will stop climbing when it is at least 16 feet (5 meters) above the detected obstacle.

4. Failsafe RTH procedure resume, the aircraft will continue ying to the Home Point at the current altitude.

The Obstacle Sensing function is disabled during RTH descent. Proceed with care.

To ensure the aircraft returns home forwards, it cannot rotate during RTH while the For-

ward Vision System is enabled.

The aircraft cannot avoid obstacles beside or behind the aircraft.

Landing Protection Function

Landing Protection will activate during auto landing.

1. When Landing Protection determines that the ground is suitable for landing, the Inspire 2 will land gently.

2. If Landing Protection determines that the ground is not suitable for landing, the Inspire 2 will hover

and wait for pilot conrmation. The aircraft will hover if it detects the ground is not appropriate for

landing even when critically low battery warning appears. Only when the battery level decreases to 0%

will the aircraft starts landing. The user can still control the aircraft’s ight orientation.

3. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when

the Inspire 2 descends below 0.7 meters. Tap to conrm or pull down the stick for 2s to activate

landing once ensure the environment is appropriate for landing.

The aircraft will not detect the landing ground with the landing protection function on in the

following circumstances:

When the user is controlling the pitch/roll/throttle sticks (Landing ground detection will be

re-activated once the sticks is not in use)

When the positioning system is not properly working (e.g. drift position error)

When the downward vision system is calibrated abnormally

When the light condition is not sufcient for downward vision system

When the obstacle is within 1 meter of the aircraft, the aircraft will decrease and hover at

the height of 0.7m above the ground. Then the aircraft will land upon receiving the conr-

mation of the user.

5 meters

15 meters

300 meters

*Coming soon.

INSPIRE 2

User Manual

2. Launch the DJI GO 4 app and tap

, then tap

, read and understand the prompts.

2 meters

ON OFF

Auto Hold

H 10.0MD

30M

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

09:29

P-GPS

AF/ MF

ISO

SHU TTER

200 0.3

5.61/200

CAP ACIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

In Flight (GPS)

5000K

Custom

TapFly

Introduction

With the TapFly feature, users can now tap on the mobile device screen to y in the designated direction

without using the remote controller. The aircraft will automatically avoid obstacles it sees or brake and hover

provided that the lighting is appropriate (< 300 lux) nor too bright (> 10,000 lux).

Using TapFly

Ensure the battery level is more than 50% for the Intelligent Flight Battery. And the aircraft is in P-mode.

Then follow the steps below to use TapFly:

1. Take off and ensure the aircraft is ying at least 6 feet (2 meters) above the ground.

3. Tap once on the target direction and wait for

icon to appear. Tap again to confirm the

selection and the aircraft will automatically y towards the target direction.

H 10.0MD

30M

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

09:29

P-GPS

AF/ MF

FPV

ISO

SHUT TER

200 0.3

5.61/200

CAPA CIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

In Flight (GPS)

5000K

Custom

INSPIRE 2

User Manual

The aircraft will automatically adjust its speed when it senses an obstacle in front or if it is ying too close

to the ground. DJI GO 4 app will prompt you if the aircraft is ying over the obstacle or from the left or right

side of the obstacle. However, this feature should not be relied upon for navigation between obstacles.

Failsafe procedures will override TapFly. If the GPS signal weakens, the aircraft will exit autonomous ight

and return to home.

09:29

P-GPS

AF/ MF

ISO

SHUT TER

200 0.3

5.61/200

CAPA CIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

H 10.0MD 30M

VS 2.0M/S VPS 2.0MH.S 10.0 M/S

In Flight (GPS)

5000K

Custom

DO NOT guide the aircraft to y towards people, animals, small and ne objects (e.g. tree

branches and power lines) or transparent objects (e.g. glass or water).

Watch for the obstacles in the ight path and stay clear of them.

There may be deviations between the expected and the actual ight path of TapFly selection.

The selectable range for the target direction is limited. You cannot make a TapFly selection

close to the upper or lower edge of the screen.

TapFly Mode may not work properly when the aircraft is ying over water or snow covered areas.

Be extra cautions when ying in dark (< 300 lux ) or bright (>10,000 lux) environments.

Enable the sticks to control the gimbal inside the DJI GO 4 app, and users can control

the gimbal’s orientation via the remote controller. When the sticks is in use, gimbal will

automatically change into free mode. At that time, use the right stick (Mode 2) to control the

pan motion while the left stick the pitch motion of the gimbal. Scroll the left dial to control the

ight speed of the aircraft.

After conrming the TapFly selection, the aircraft will y in the direction marked by the icon. Note that you

can still use the control stick to control the movement of the aircraft during the ight.

30M

Exit TapFly

Use the following methods to exit TapFly:

1. Tap “ ” button on the screen.

2. Pull back the pitch stick on the remote controller and hold for more than 3s.

3. Press the Intelligent Flight Pause button on the remote controller.

INSPIRE 2

User Manual

OR OR

Pause button

2. Launch the DJI GO 4 app and tap , then tap , read and understand the prompts.

2 meters

ON OFF

Auto Hold

H 10.0MD

30M

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

09:29

P-GPS

AF/ MF

ISO

SHU TTER

200 0.3

5.61/200

CAP ACIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

In Flight (GPS)

5000K

Custom

Tap on the subject you want to track then tap to conrm selection. If the subject is not automatically

recognized, drag a box around it. The box

will turn green when tracking is in progress. If the box

turns red, the object could not be identied and you should try again.

Aircraft will stop and hover after exiting from TapFly. Tap a new target direction to continue ying or begin

manual ight.

ActiveTrack

ActiveTrack allows you to mark and track a moving object on your mobile device screen. The

aircraft will automatically avoid obstacles in its ight path. No external tracking device is required.

The Inspire 2 can automatically identify and trace bikes and other vehicles, people and animals,

and use different tracking strategies for each.

Using ActiveTrack

Ensure the Intelligent Flight Battery has more than 50% power and the aircraft is in P-mode. Then

follow the steps below to use ActiveTrack:

1. Take off and hover at least 6 feet (2 meters) above the ground.

INSPIRE 2

User Manual

Trace Prole

The aircraft tracks the subject at a constant

distance. Use the roll stick on the remote

controller or the slider in DJI GO 4 app to circle

the subject.

The aircraft tracks the subject at constant angle

and distance from the side. Use the roll stick on

the remote control to circle the subject.

DO NOT select an area containing people, animals, small, ne objects (e.g. tree branches

and power lines) or transparent objects (e.g. glass or water).

Stay clear of obstacles near the ight path, particularly when the aircraft is ying backward.

Be extra vigilant when using ActiveTrack in any of the following situations:

a) The tracked subject is not moving on a level plane.

b) The tracked subject changes shape drastically while moving.

c) The tracked subject could be blocked or out of sight for a long time.

d) The tracked subject is moving on a snowy surface.

e) Available light is low (< 300 lux) or high (> 10,000 lux).

f) The tracked subject has a similar color or pattern as its surrounding environment.

DO NOT select an area containing people, animals, small, ne objects (e.g. tree branches

and power lines) or transparent objects (e.g. glass or water surface).

Stay clear of obstacles near the ight path, particularly when the aircraft is ying backward.

Be extra vigilant when using ActiveTrack in any of the following situations:

a) The tracked subject is not moving on a level plane.

b) The tracked subject changes shape drastically while moving.

c) The tracked subject could be blocked or out of sight for a long time.

ActiveTrack includes following functions:

H 10.0MD

30M

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

09:29

P-GPS

AF/ MF

ISO

SHUT TER

200 0.3

5.61/200

CAPA CIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

智能跟随

In Flight (GPS)

5000K

Custom

INSPIRE 2

User Manual

Exiting ActiveTrack

Use the following methods to exit ActiveTrack:

1. Tap the “ ” button on the screen.

2. Press the Intelligent Flight Pause button on the remote controller.

Tripod Mode

Tap the icon in the DJI GO 4 app to enable Tripod Mode. The Tripod Mode is a speed-controlling

mode that using the sticks to control the ight speed instead of the attitude, which can help the

aircraft to obtain a stable speed, thus reducing the joystick jitter. The Tripod Mode can be used in

many situations where rocker arm and slide rail are required as this mode can shoot smoother and

sharper videos.

In Tripod Mode, the maximum flight speed can be adjusted in DJI GO 4 app and the braking

distance is reduced to 10 ft (3 m). Responsiveness to stick movements is also reduced for smoother

movements.

Only use Tripod Mode where the GPS signal is strong or light conditions are ideal for

the vision system. If GPS signal is lost and the vision system cannot function, it will

automatically switch to Atti mode. In this case, ight speed will increase and the aircraft

cannot hover in place. Use Tripod Mode carefully.

Spotlight Pro

Spotlight Pro is a powerful new tracking mode that allows a single pilot to capture complex,

dramatic images. The gimbal will auto adjust to keep the camera always pointing at the subject.

Lock onto a subject in Spotlight Pro mode, and the gimbal camera can capture the locked subject

regardless of the directions that the aircraft ies.

Quick Mode: Use your nger to draw a square with the object in to begin tracking.

Composition Mode: Use your nger to draw a square. When the subject enters the square, press

C2 button to begin tracking. Press C2 button again to stop tracking.

In Free mode, you can control the aircraft’s heading independently of the camera.

In Follow mode, aircraft heading will be the same as that of the camera.

H 10.0MD

30M

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

09:29

P-GPS

AF/ MF

ISO

SHUT TER

200 0.3

5.61/200

CAPA CIT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

Compisition

Settings

Quick Compisition

In Flight (GPS)

5000K

Custom

Aircraft Head

Free

After exiting ActiveTrack, the aircraft will hover in place, at which point you may choose to fly

manually, track another subject, or return to home.

You must follow local privacy laws and regulations when using ActiveTrack.

Aircraft will not be able to avoid obstacles while in Prole or Spotlight Mode. Use these modes

in open areas.

INSPIRE 2

User Manual

[1]

[2]

[4]

[3]

Vision System and Infrared Sensing System

The main components of the Vision System are located on the front and bottom of the Inspire 2,

including [1] [2] two stereo vision sensors and [3] two ultrasonic sensors. The Vision Sys tem uses

ultrasound and image data to help the aircraft maintain its current position, enabling precision hov-

ering indoors or in environments where a GPS signal is not available. The Vision System constantly

scans for obstacles, allowing the Inspire 2 to avoid them by going over, around, or hovering.

The Infrared Sensing System consists [4] of two infrared modules on top side of the aircraft. These

scan for obstacles on top side of the aircraft and is active in certain ight modes.

You can drag the subject in the DJI GO 4 app or control the gimbal via sticks to change

the subject position in app.

Aircraft spin is enabled by default in free mode, which makes the gimbal rotate back

quickly when it reaches the limited angle during shooting.

Spotlight Pro can also be used in S-mode, A-mode, TapFly and Tripod mode.

Detection Range

The detection range of the Vision System is depicted as follow. Note that the aircraft cannot sense

and avoid the obstacles that are not within the detection range.

40cm

60cm

INSPIRE 2

User Manual

The aircraft cannot detect the object in the shadow areas. Stay alert in ight.

The detection range of the Ultrasonic Sensor is depicted as follow.

5. Place the side of visual calibration plate with the dots facing the forward vision system, and follow

the instructions in the DJI Assistant 2 to complete calibration.

6. Place the aircraft straightly, and ensure the side of visual calibration plate with dots is facing

the downward vision system, and follow the instructions in the DJI Assistant 2 to complete

calibration.

Calibration

Forward and Downward Vision Systems cameras installed on the aircraft are calibrated on delivery.

However these cameras are vulnerable to excessive impact and will require occasional calibration

via DJI Assistant 2.

Calibration via Visual Calibration Plate

1. Make sure that the aircraft is in landing mode. Power on the aircraft and toggle the USB Mode

Switch down.

2. Connect the Inspire 2 and the PC via the USB cable (with Double A ports)

3. Launch DJI Assistant 2 and login with a DJI account.

4. Click Inspire 2 and the calibration button.

INSPIRE 2

User Manual

Calibrating via Screen

Follow the steps below to calibrate the camera.

Point the aircraft toward the screen

Align the boxes

Pan and tilt the aircraft

Follow the steps below to use Vision System:

1. Toggle the ight mode switch to P-mode.

2. Place the aircraft on a flat surface. Note that the Vision System cannot work

properly on surfaces without clear pattern variations.

3. Turn on the aircraft. The aircraft status indicator will ash green two times, which

indicates the Vision System is ready. Gently push the left stick up to lift off and

the aircraft will hover in place.

ON OFF

Auto Hold

Using Vision System

Vision System is activated automatically when the Inspire 2 is powered on. No manual action is

required. Vision System is typically used in the indoor environment where no GPS is available. By

using the sensors on the Vision system, Inspire 2 can perform precision hovering even when no GPS

is available.

DO NOT power off or unplug the USB cable after calibration and wait for the data calculation.

INSPIRE 2

User Manual

The performance of your Vision System and Infrared Sensing System are affected by the surface

being own over. Ultrasonic sensors may not be able to accurately measure distances when

operating above sound-absorbing materials and the camera may not function correctly in

suboptimal environments. The aircraft will switch from P-mode to A-mode automatically if neither

GPS nor Vision System and Infrared Sensing System are available. Operate the aircraft with

great caution in the following situations:

a) Flying over monochrome surfaces (e.g. pure black, pure white, pure red, pure green).

b) Flying over a highly reective surfaces.

c) Flying at high speeds of over 31mph (50kph) at 2 meters or over 11mph (18kph) at 1

meter.

d) Flying over water or transparent surfaces.

e) Flying over moving surfaces or objects.

f) Flying in an area where the lighting changes frequently or drastically.

g) Flying over extremely dark (lux < 10) or bright (lux > 100,000) surfaces.

h) Flying over surfaces that can absorb sound waves (e.g. thick carpet).

i) Flying over surfaces without clear patterns or texture.

j) Flying over surfaces with identical repeating patterns or textures (e.g. tiling).

k) Flying over inclined surfaces that will deect sound waves away from the aircraft.

l) Flying over obstacles with too small effective infrared reective surface.

m) DO NOT position the sides of two aircraft toward each other to avoid interference between

the 3D infrared modules.

n) DO NOT cover the protective glass of the infrared module. Keep it clean and undamaged.

Keep sensors clean at all times. Dirt or other debris may adversely affect their effectiveness.

Vision System is only effective when the aircraft is at altitudes of 0.3 to 10 meters.

The Vision System may not function properly when the aircraft is ying over water.

The Vision System may not be able to recognize pattern on the ground in low light

conditions (less than 100 lux).

Do not use other ultrasonic devices with frequency of 40 KHz when Vision System is in

operation.

Keep animals away from the aircraft when Vision System is activated. The sonar sensor

emits high frequency sounds that are audible to some animals.

Assisted Braking from Obstacle Sensing

are detected around the aircraft. Note that Obstacle Sensing function works best when lighting

is adequate and the obstacle is clearly marked or textured. The aircraft must y at no more than

31mph (50kph) to allow sufcient braking distance.

INSPIRE 2

User Manual

Flight Recorder

Flight data is automatically recorded to the internal storage of the aircraft. This includes flight

telemetry, aircraft status information, and other parameters. To access this data, connect the aircraft

to the PC through the USB port and launch the DJI Assistant 2.

Attaching and Detaching the Propellers

Attaching the Propellers

Refer to "Attaching Propellers" for details.

Detaching the Propellers

Press down the spring pad and rotate the propeller lock to remover the propeller.

Be aware of the sharp edges of the propellers. Handle with care.

Use only the DJI approved propellers. Do not mix propeller types.

Check that the propellers and motors are installed correctly and rmly before every ight.

Ensure that all propellers are in good condition before each ight. DO NOT use aged,

chipped, or broken propellers.

To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are

spinning.

ONLY use original DJI propellers for a better and safer ight experience.

DJI Intelligent Flight Battery

The DJI Intelligent Flight Battery has a capacity of 4280mAh, voltage of 22.8V, and smart charge-

discharge functionality. It can only be charged with an appropriate DJI approved charger.

DJI Intelligent Flight Battery Functions

1. Battery Level Display: LEDs display the current battery level.

2. Auto-discharging Function: The battery automatically discharges to below 70% of total power

when it is idle (press the power button to check battery level will cause battery to exit idle state)

for more than 10 days to prevent swelling. It takes around 3 days to discharge the battery to

65%.It is normal to feel moderate heat emitting from the battery during the discharge process.

Discharge thresholds can be set in the DJI GO 4 app.

3. Balanced Function: Automatically balances the voltage of each battery cell when charging.

4. Over charge Protection: Charging automatically stops when the battery is fully charged.

5. Temperature Protection: The battery will only charge when the temperature is between 5 °C (41°F)

and 45°C (113°F).

6. Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected.

7. Over Discharge Protection: Over-discharging can seriously damage the battery. The current output

will be cut off once the battery cell is discharged to 2.8V when it is not in ight mode. To prolong

the ight time, the over-charging protection will be disabled when the batteries are discharging

during ight. In such case, the battery voltage will be below 2V, which may lead to safety hazard,

like re. Therefore, the battery will not be able to charge when the voltage of a single battery cell is

below 2V and please do not use that battery. Always be alert to avoid serious over-discharging, or

the battery will be permanently damaged.

INSPIRE 2

User Manual

8. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.

9. Battery Cell Damage Protection: The DJI GO 4 app displays a warning message when a

damaged battery cell is detected.

10. Sleep Mode: Sleep mode is entered to save power when the aircraft is not ying.

11. Communication: Battery voltage, capacity, current, and other relevant information is provided to

the aircraft’s to the main controller.

12. Paring Batteries: Powered by two batteries (with battery cells connected in parallel), the Inspire

2 requires that the two batteries should have similar properties, e.g. internal resistance. It

is recommended to pair the batteries from the very beginning inside the DJI GO 4 app. DJI

GO 4 app will also prompt when the batteries that are not paired are in use. The Intelligent

Flight Battery Charging Hub will charge the paired batteries simultaneously. The pair sticks is

available for paired batteries.

13. Heating: Batteries are able to work even in cold weather, ensuring a safe ight. Refer to "Using

the Battery" section for details.

Refer to

Disclaimer

and

Intelligent Flight Battery Safety Guidelines

before use. Users take

full responsibility for all operations and usage.

Charging the Intelligent Flight Battery

The Inspire 2 Intelligent Flight Battery Charging Hub is designed for use with the Inspire 2 Battery

Charger. It charges up to four Intelligent Flight Batteries simultaneously. The battery pair with more

stored power will be charged rst. The Charging Hub will intelligently charge batteries in sequence

according to battery power levels from high to low, if batteries are not paired. Pairing can be carried

out using the DJI GO 4 app. The Micro USB port is used for rmware updates.

Overview

[3]

[1]

[2]

[8]

[6]

[5]

[4]

[7]

[1] Power Port

[2] Charging Port

[3] Charging Port Cover

[4] Battery Charging Level Indicators

[5] Cover/Battery Release Button

[6] Status LEDs

[7] Firmware Update Port (Micro USB)

[8] Buzzer Switch

Connecting to a Power Source

Connect the standard Inspire 2 Battery Charger to a power outlet (100-240V, 50/60Hz), then

uncover the rubber cover on the power port to connect the Charging Hub to the Inspire 2 Battery

Charger*.

Power OutletChargerCharging Hub

INSPIRE 2

User Manual

Connecting Batteries

Press the release button and open the corresponding charging port cover. Insert the Intelligent

Flight Battery into the charging port to begin charging. The battery pair with more stored power

will be charged rst. The Charging Hub will intelligently charge batteries in sequence according to

battery power levels from high to low, if batteries are not paired. Pairing can be carried out using

the DJI GO 4 app. Refer to the "Status LED Description” section for more information about Status

LED blinking patterns. The buzzer will begin beeping when charging is complete. Refer to the

“Buzzer Beeping Description” for more information about buzzer beeping patterns.

Always align the grooves on the Intelligent Flight Battery with the battery slot tracks.

Press the release button to detach batteries after charging is complete.

DO NOT leave metal terminals exposed to open air when not in use.

Status LED Descriptions

Status LED (Charging Hub) Description

Blinks Green Charging

— Solid Green Fully charged

Blinks Red Battery Charger Error. Retry with an ofcial battery charger.

— Solid Red Intelligent Flight Battery error

Blinks Yellow

Battery temperature too high/low. Temperature must be within

operating range (5°-40℃)

— Solid Yellow Ready to charge

Alternating Green Blinks Intelligent Flight Battery not detected

Battery Level Indicators while Charging (Battery)

LED1 LED2 LED3 LED4 Battery Level

0%~50%

50%~75%

75%~100%

Fully Charged

LED1

LED3

LED2

LED4

Battery Level Button

* It will take approximately 1.5 hours to fully charge the Inspire 2 Intelligent Flight Battery, and 3 hours for the

remote controller. It will take a longer time to charge the Intelligent Flight Battery and remote controller together.

INSPIRE 2

User Manual

Charging Protection LED Display

The table below shows battery protection mechanisms and corresponding LED patterns.

Battery Level Indicators for Battery Protection

LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item

LED2 blinks twice per second Over current detected

LED2 blinks three times per

second

Short circuit detected

LED3 blinks twice per second Over charge detected

LED3 blinks three times per

second

Over-voltage charger detected

LED4 blinks twice per second

Charging temperature is too

low (<0°C)

LED4 blinks three times per

second

Charging temperature is too

high (>40°C)

After any of the above mentioned protection issues are resolved, press the button to turn off the

Battery Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to

resume charging. Note that you do not need to unplug and plug the charger in the event of a room

temperature error, the charger will resume charging when the temperature falls within the normal

range.

DJI does not take any responsibility for damage caused by third-party chargers.

How to discharge the Intelligent Flight Battery before transport the batteries for long trip:

Fly the aircraft outdoors until there is low battery power left, or until the battery can no

longer be turned on.

Buzzer Beeping Description

Toggle the buzzer switch to turn on/off the warning sound.

Descriptions Beeping Pattern

Toggle the buzzer switch to turn it on Quick beeping

Connect to the Battery Charger Quick beeping

A battery pair is fully charged Quick beeping

Four Intelligent Flight Batteries are fully charged

Alternating two short and one long beeps,

last for about 1 hour

Updating the Firmware

DJI will release rmware updates when available. Refer to the ofcial DJI website and follow the

instructions below to update the rmware.

1. Download the latest rmware update program from the ofcial DJI website.

(http://www.dji.com/inspire-2/info#downloads)

INSPIRE 2

User Manual

2. Turn on the Charging Hub, then connect it to a computer using a Micro USB cable.

3. Run the rmware update program. Press the update button and wait for the process to nish.

4. The Charging Hub will automatically restart when the update has been successfully completed.

5. Repeat this process if the rmware update fails for any reason.

Powering ON/OFF

Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on.

The Power LED will turn red and the Battery Level Indicators will display the current

battery level.

Powering Off: Press the Power Button once, then press again and hold for 2 seconds to power off.

Heating the Battery

Manual Heating: When the battery is powered off, press and hold the power button for 3 seconds to

initiate the battery to warm up manually.

The battery will start to warm up when the temperature is below 59℉(15℃)with the LED1&2 and

LED3&4 blinking alternatively. The temperature of the battery will stop increasing when it reaches

68℉(20℃).

The temperature of the battery will be between 59°-68℉(15°-20℃)when it is above 59℉(15℃)with

the LED1 and LED4 blinking alternatively, lasting for approximately 30 minutes. And then it will be

powered off automatically.

Auto Heating: Insert the batteries into the aircraft and power on. When the temperature of the battery

is below 59℉(15℃), the battery will warm up automatically, and you may check the LED for current

power level.

Using the Battery

INSPIRE 2

User Manual

Low Temperature Notice:

1. The performance of the intelligent Flight Battery is significantly reduced when flying in a low

temperature environments (those with air temperatures below 5℃). Ensure that the battery is fully

charged and the cell voltage is at 4.35 V before each ight.

2. If the DJI GO 4 app displays the “Critical Low Battery Level Warning” when flying in low

temperature environments, stop ying and land the aircraft immediately. You will still be able to

control the aircraft’s movement when this warning is triggered.

3. In extremely cold weather, the battery temperature may not high enough for ight even it can

warm up. In such cases, take insulation measures if necessary.

4. To ensure optimum performance, keep the Intelligent Flight Battery’s core temperature above

20℃ when in use.

5. Battery insulation paste is available for you to use.

Checking the battery level

The Battery Level Indicators display how much remaining power the battery has. When the battery

is powered off, press the Power Button once. The Battery Level Indicators will light up to display the

current battery level. See below for details.

The Battery Level Indicators will also show the current battery level during discharging. The

indicators are dened below.

: LED is on.

: LED is ashing.

: LED is off.

Battery Level

LED1 LED2 LED3 LED4 Battery Level

87.5%~100%

75%~87.5%

62.5%~75%

50%~62.5%

37.5%~50%

25%~37.5%

12.5%~25%

0%~12.5%

Remote Controllers

This chapter describes the features

of the remote controller that includes

aircraft and remote controller operations

and dual remote controller mode.

Remote Controller

RemoteControllerProle

The Inspire 2 remote controller is a multi-function wireless communication device that integrates a dual

frequency video downlink system and the aircraft remote control system. The 5.8 GHz video downlink

is recommended for urban areas to resist interference, 2.4 GHz is good for long transmission distances

in open areas. The remote controller features a number of camera control functions, including photo/

video capture as well as gimbal control. The battery level is displayed via LED indicators on the front

panel of the remote controller. When in dual remote controller mode, each of the two remote controllers

separately control aircraft and camera and can be up to 328 feet (100m) apart.

Compliance Version: The remote controller is compliant with local compliance and

regulations.

Operating Mode: Control can be set to Mode 1 or Mode 2, or to a custom mode.

Mode 1: The right stick serves as the throttle.

Mode 2: The left stick serves as the throttle.

Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer

eld) to prevent transmission interference.

Remote Controller Operations

Powering On And Off The Remote Controller

The Inspire 2 remote controller is powered by a 2S rechargeable battery with a capacity of

6000mAh. The battery level is indicated by the Battery Level LEDs on the front panel. Follow the

steps below to power on your remote controller:

1. When powered off, press the Power Button once and the Battery Level LEDs will display the

current battery level.

2. Then, press and hold the Power Button to power on the remote controller.

3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote

controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft.

The Status LED will show a solid green light when linking is completed.

4. Repeat step 2 to power off the remote controller after nish using it.

INSPIRE 2

User Manual

Power Outlet

Controlling Camera

Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial

Video Recording Button and Gimbal Dial on the remote control.

[1] Camera Settings Dial

Turn the dial to adjust camera settings such as ISO, shutter speed, and aperture without letting

go of the remote controller. Press down on the dial to toggle between these settings.

[2] Shutter Button

Press to take a photo. If burst mode is activated, multiple photos will be taken with a continuous

press. Press to take a photo even when recording.

[3] Video Recoding Button

Press once to start recording video, then press again to stop recording.

[4] Gimbal Dial

Control the tilt of the gimbal.

Controlling Aircraft

This section explains how to use the various features of the remote controller. The Remote Controller

is set to Mode 2 by default.

Stick Neutral/ mid point: Control sticks of the Remote Controller are placed at the central

position.

Move the Stick: The control stick is pushed away from the central position.

Charging Remote Controller

Charge the remote controller via supplied charger.

[1]

[2]

[3]

[4]

INSPIRE 2

User Manual

Remote

Controller

(Mode 2)

Aircraft

(

indicates nose direction)

Remarks

Moving the left stick up and down changes the

aircraft’s elevation.

Push the stick up to ascend and down to descend.

Push the throttle stick up to takeoff.

When both sticks are centered, the Inspire 2 will

hover in place.

The more the stick is pushed away from the

center position, the faster the Inspire 2 will change

elevation. Always push the stick gently to prevent

sudden and unexpected elevation changes.

Moving the left stick to the left or right controls the

rudder and rotation of the aircraft.

Push the sick left to rotate the aircraft counter clock-

wise, and push the stick right to rotate the aircraft

clockwise. If the stick is centered, the Inspire 2 will

stay facing its current direction.

The more the stick is pushed away from the center

position, the faster the Inspire 2 will rotate.

Moving the right stick up and down changes the

aircraft’s forward and backward pitch.

Push the stick up to y forward and down to y

backward. The Inspire 2 will hover in place if the

stick is centered.

Push the stick further away from the center position for a

larger pitch angle and faster ight.

Moving the right stick control left and right changes

the aircraft’s left and right pitch.

Push left to y left and right to y right. The Inspire 2

will hover in place if the stick is centered.

Push the stick further away from the center position for

a larger pitch angle and faster ight.

Gimbal Dial: Turn the dial to the right, and the

camera will shift to point upwards. Turn the

dial to the left, and the camera will shift to point

downwards. The camera will remain in its current

position when dial is static.

Press the Intellighent Flight Pause button to

pause the current task.

INSPIRE 2

User Manual

Lower Raise

Position Figure Flight Mode

Position

P-mode

Position

S-mode

Position

A-mode

Flight Mode Switch

Toggle the switch to select the desired ight mode.

Choose between; P-mode, S-mode and A- mode.

Position 1

Position 2

Position 3

P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,

stereo Vision System and Infrared Sensing System to stabilize, avoid obstacles or track moving subjects.

Advanced features such as TapFly and ActiveTrack are enabled in this mode.

S-mode (Sport): The handling gain values of the aircraft are adjusted to enhance aircraft maneuverability.

Note that Obstacle Sensing systems are disabled in this mode.

A-mode (Attitude): When neither the GPS nor the Vision System is available, the aircraft will only use its

barometer for positioning to control the altitude.

The Flight Mode is locked in P-mode by default, regardless of switch position. To switch ight modes, go

to Camera view in the DJI GO 4 app, tap

and enable “Multiple Flight Modes”. After enabling multiple

ight modes, toggle the switch to P and then to S to y in Sport Mode.

Transformation Switch / RTH Button

The Transformation Switch / RTH Button combination serves two functions. Toggle the switch up or

down to raise or lower the landing gear. Or, press the button to activate the Return to Home (RTH)

procedure. Intelligent landing gear will automatically raise after takeoff and lower when landing.

They can also be controlled manually using the Transformation Switch.

Transformation Switch

This switch has two positions. The effect of toggling the switch to any of these positions is dened below:

Adjusting Controller Sticks

Hold and twist the controller sticks clockwise or counter clockwise to

adjust the length of the controller sticks. A proper length of controller

sticks can improve the controlling accuracy.

INSPIRE 2

User Manual

1. Raise: Raise the landing gear to its upper most position.

2. Lower: The landing gear will lower to its lowest position for landing.

Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear

is lowered before landing.

The aircraft will not be able to land if the landing gear does not lower.

RTH button

Press and hold this button to start the Return to Home (RTH) procedure. The aircraft will then return

to the last recorded Home Point. Press this button again to cancel the RTH procedure and regain

the control of the aircraft.

Determine RTH status by sound:

Single beep... Request to return, but not receive the respond from the aircraft yet.

Double beep... RTH in progress.

INSPIRE 2

User Manual

Optimal Transmission Range

The signal transmission between aircraft and remote controller perform best within the range that

displayed in the picture shown below:

Ensure the aircraft is ying within the optimal transmission range. Adjust the distance and position

between the operator and the aircraft to achieve optimal transmission performance. The position

of the antennas required for optimal transmission range varies in the frequency of 5.8G and 2.4G.

Please place the antennas based on the actual operating frequency.

Dual Remote Controllers Mode

More than one remote controller can connect to the same aircraft in Dual Remote Controller mode.

In Dual Controllers mode, the “Master” remote controller operator controls the orientation of the

aircraft, while the “Slave” remote controller controls the movement of the gimbal and camera

operation. “Master” and "Slave" remote controllers communicate each other via WiFi.

Optimal Transmission RangeOptimal Transmission Range

5.8G

90° 60°

2.4G

Strong Weak

Connecting Mobile Device

Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder

to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your

mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of

the cable into your mobile device, and the other end into the USB port on the back of the remote controller.

INSPIRE 2

User Manual

In Dual Controllers Mode, the Master remote controller controls the gimbal in both pitch

and pan directions when it takes charge. The Slave remote controller is able to control the

gimbal in pitch, pan and roll directions when it takes charge.

Russian and Israel don't support Dual Remote Controller mode.

Setting Up Dual Remote Controllers Mode

Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master”

remote controller by through the DJI GO 4 app. Follow the steps below for setup:

“Master” Remote Controller:

1. Connect the remote controller to your mobile device and launch the DJI GO 4 app.

2. Go to the Camera page, and tap

to enter the remote controller settings window.

3. Select “Master” set the remote controller as “Master” remote controller.

4. Enter the connection password for the “Slave” remote controller.

Master

Master ID: 28172d Slave ID: 14f93f

Connection Status:ON Authorization Code:

Set Remote Controller Status

Master and Slave

Remote Controller Calibration

666666

Remote Controller Settings

Slave

OFF

Remote controller cannot link to the aircraft if the remote controller is set as “Slave”.

Meanwhile, the “Slave” remote controller cannot control the orientation of the aircraft. Reset

the remote controller to “Master” in DJI GO 4 app if you wish to link the remote controller to

the aircraft.

“Slave” Remote Controller:

1. Select “Slave”to set the remote controller as “Slave” remote controller.

Search Master

Remote Controller Settings

Master and Slave

Set Remote Controller Status

Master

Slave

OFF

Master ID: 28172d Slave ID: 14f93f

Connection Status:OFF

INSPIRE 2

User Manual

3. Select the “Master” remote controller from the "Master" list and input the connection password to

connect to the desired “Master” remote controller.

2816f2

28172d

-56.00

RSSI

-22.00

Search Master

Master

Scan

Connect

RTH LED

Status LED

Remote Controller Status LED

The Status LED reflects connection status between Remote Controller and aircraft. The RTH

LED shows the Return to Home status of the aircraft. The table below contains details on these

indicators.

Search Master

Remote Controller Settings

Master and Slave

Set Remote Controller Status

Master

Slave

OFF

Master ID: 28172d Slave ID: 14f93f

Connection Status:OFF

2. Search the “Master” remote controller in the surrounding area.

INSPIRE 2

User Manual

Status LED Alarm Remote Controller Status

—

Solid Red ——

The remote controller set as "Master" but it is not

connected with the aircraft.

—

Solid Green ——

The remote controller set as "Master" and it is

connected with the aircraft.

—

Solid Purple ——

The remote controller set as "Slave" but it is not

connected with the aircraft.

—

Solid Blue ——

The remote controller set as "Slave" and it is

connected with the aircraft.

Slow Blinking

Red

D-D-D

......

Remote controller error.

Red and Green/ Red and

Yellow Alternate Blinks

None HD Downlink is disrupted.

RTH LED Sound Remote Controller Status.

—

Solid White chime Initiate RTH procedure.

Blinking White D

. . .

Send RTH command to aircraft.

Blinking White DD

.. .. ..

Aircraft returning to Home Point.

The Remote Status Indicator will blink red, sound an alert, when the battery level is critically

low.

Linking the Remote Controller

The remote controller is linked to your aircraft before delivery. Linking is only required when using a

new remote controller for the rst time. Follow these steps to link a new remote controller:

1. Power on the remote controller and connect to the mobile device. Launch DJI GO 4 app.

2. Power on the Intelligent Flight Battery.

3. Enter camera view and then tap “Linking Remote Controller” button as shown below.

Charge Mobile Phone

Linking Remote Controller

Button Customization

Not Defined

Never

C2 Not Defined

Customize with the C1 and C2 button on the back of the Remote Controller.

Remote Controller Settings

INSPIRE 2

User Manual

Remote controller cannot link to the aircraft if the remote controller is set as “Slave”.

Meanwhile, the “Slave” remote controller cannot control the orientation of the aircraft.

Reset the remote controller to “Master” in DJI GO 4 app if you wish to link the remote

controller to the aircraft.

Remote controller will disconnect from the linked aircraft if a new remote controller is

linked to the same aircraft.

Press the C1 button, C2 button and recording button, can obtain a fast linking.

4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and

"beep" sound is emitted.

5. Locate the Linking button on the aircraft, as shown in the gure shown below. Press the Linking

button to start linking. The Remote Controller Status Indicator will display solid green if Link is

succeed.

Used with the DJI Focus

DJI Focus and DJI Focus Handwheel are fully compatible with the Zenmuse X5S and X4S gimbal

and camera. No calibration is required when using the Focus with the gimbal and camera. Use the

DJI Focus for example.

Connection

To allow communication between the two devices, connect the communication port on the Focus

remote controller to the CAN Bus port on the remote controller using the dedicated CAN Bus cable.

Ensure that the gimbal and camera is set in AF mode.

Refer to "DJI FOCUS User Manual" for more information.

Gimbal and Camera

This chapter provides the technical

specications of the camera and explains

the working mode of the gimbal.

Camera and Gimbal

Camera

CameraProle

Featuring M4/3 CMOS sensor, the Zenmuse X5S supports up to 20.80 MP still photo capture. It is

capable of capturing 5.2K 30fps CinemaDNG video and Apple ProRes Video as well as 4K 60fps

using H.264. The Zenmuse X5S is built using the M4/3 interchangeable lens standard. A variety

of shooting modes, including single shooting, burst shooting and interval shooting, provide more

options of capture. Burst and AEB is available, with up to 14 stills.

When the DJI CINESSD is in use, the Zenmuse X5S is able to record lossless videos with a bitrate

of 5.2 Gbps in the CinemaDNG format or capture DNG stills at 20fps continuously.

When mounted on the Inspire 2, the 3-axis gimbal provides a stable platform for the camera to get clear

shots even during rapid maneuvering. The gimbal tilts the camera across a -130° to +40° pitch angle

and pans ± 320° in both directions. Live HD video from the camera is streamed to the DJI GO 4 app.

Camera Micro SD Card Slot

To store your photos and videos, plug in the Micro SD card into the slot shown below before

powering on the Inspire 2. The Inspire 2 comes with a 16GB Micro SD card and supports up to a

128GB Micro SD card. A UHS-3 type Micro SD card is recommended, because the fast read and

write capability of these cards enables you to store high-resolution video data.

USB Port

Power on the Inspire 2 and then connect a USB cable to the USB port to download photos or videos

from the Inspire 2 to your computer.

The Inspire 2 currently supports the following Micro SD cards, and will continue to support

more cards in future.

Sandisk Extreme 32GB UHS-3 MICROSDHC

Sandisk Extreme 64GB UHS-3 MICROSDXC

Panasonic 32GB UHS-3 MicroSDHC

Panasonic 64GB UHS-3 MicroSDXC

Samsung PRO 32GB UHS-3 MicroSDHC

Samsung PRO 64GB UHS-3 MicroSDXC

Samsung PRO 128GB UHS-3 MicroSDXC.

Do not remove Micro SD card from the Inspire 2 when it is powered on.

INSPIRE 2

User Manual

+320°

+20°

-320° -20°

+40°

-130°

0°

Using DJI GO 4 App to Control Gimbal

Follow the steps below to use DJI GO 4 app to control the gimbal orientation:

1. Launch DJI GO 4 app, enter camera page.

2. Tap and press on the screen until a blue circle is shown.

3. Slide to control the gimbal orientation within the “Camera” page as shown below.

Power on the aircraft before attempting to download the les.

Camera Operation

Remote Controller

Use the Shutter and Record button on the remote controller to shoot the images or the videos. For

more information about how to use these buttons, refer to “Controlling Camera”.

DJI GO 4 app

Use the DJI GO 4 app to shoot the images or the videos. For more information, refer to “Zenmuse

X5S User Manual”.

Gimbal

GimbalProle

The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture

stabilized images and video.

INSPIRE 2

User Manual

09:29

P-GPS

AF/ MF

ISO

SHU T TER

200 0.3

5.61/200

CAPACITY

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

10.0

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

In Flight (GPS)

5000K

Custom

Pitch Pan

Gimbal Operation Modes

Three Gimbal operation modes are available. Switch between the different operation modes on the

Camera page of the DJI GO 4 App. Note that your mobile device must be connected to the remote

controller for changes to take effect. Refer to the table below for details:

Roll

Follow Mode Gimbal pan cannot be controlled in this mode.

Free Mode The Gimbal’s motion is independent of the aircraft’s orientation.

Reset

Tap to force the Gimbal orientation to re-align with aircraft’s

orientation by panning from gimbal’s current orientation. Pitch angle

will remain unchanged during the re-alignment.

The user cannot control the gimbal pan in follow mode. In free mode, press and hold on

the C1 Button while rotating the control dial to adjust the yaw of the gimbal.

The gimbal will be in free mode when the “Slave” remote controller controls the gimbal in

Dual Remote Controllers Mode.

INSPIRE 2

User Manual

3. Power on the aircraft.

4. Information about the CINESSD will be available in the DJI GO™ 4 app.

Exporting Files

1. Power off the aircraft. Remove the batteries and then the CINESSD.

2. Insert the CINESSD into the DJI CINESSD Station, then connect the station to a computer via a

USB cable.

*0.1

USB Port

Using CINESSD

Using an Inspire 2 as an example.

Storing Files

1. Power off the aircraft.

2. Insert the CINESSD into the aircraft. If the CINESSD is not detected, check if it is inserted correctly.

INSPIRE 2

User Manual

3. When connected, an icon named “DJI_A” followed by a number sequence will appear. Click to

start the le export.

4. Safely remove the station before unplugging it from your computer.

No additional software is required for exporting data from the CINESSD. You may also use

the following DJI software based on your system.

Windows: DJI Camera Exporter.

Mac: DJI CINELIGHT

DO NOT remove the CINESSD when it is powered on.

Insert the CINESSD before connecting the station to the computer.

The station icon will vary based on your computer operating system.

Deleting Files

To guarantee the high performance of the DJI CINESSD, the station only supports le exporting. To

delete les, please insert the CINESSD into the aircraft and launch the DJI GO 4 app to format the

CINESSD to free up storage space.

Ensure to back up your les before formatting the DJI CINESSD.

Specications

Capacity 120 GB*/ 240 GB/ 480 GB

Size 105.5 mm×27 mm×7 mm

Weight 42.5 g

Operation Temperature Range 32° to 104° F (0° to 40° C)

Storage Temperature Range -40° to 185° F (-40° to 85 ℃)

Humidity 5% to 95%, non-condensing

* The 120G CINESSD does not support 5.2K 30fps or 4K 60fps CinemaDNG videos.

DJI GO 4 App

This chapter describes the four main

GUI of the DJI GO 4 app.

DJI GO 4 App

The DJI GO 4 app is a new mobile app designed specifically for the Inspire 2. Use this app to

control the gimbal, camera and other features of your flight system. The app also comes with

Map, Store a User Center, for conguring your aircraft and sharing your content with friends. It is

recommended that you use a tablet for the best experience.

Camera

The Camera page contains a live HD video feed from the Inspire 2’s camera. You can also

congure various camera parameters from the Camera page.

INSPIRE 2

GO FLY

CONNECTED

Equipment

Editor Skypixel

Always keep abreast of local flight regulations

before flying ！

09:29

10.0

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

P-GPS

AF/ MF

ISO

SHU T TER

200 0.3

5.61/200

CAPAC IT Y

4KP3020:12 384G

SD TIME

4KP30

74%

70%

4.07V

READY TO GO (GPS)

5000K

Custom

1 2 3 4 5 6 7 8 9 10 11

INSPIRE 2

User Manual

1. System Status

READY TO GO (GPS)

: This icon indicates aircraft ight status and various warning messages.

2. Battery Level Indicator

: The battery level indicator provides a dynamic display of the battery level. The colored

zones on the battery level indicator represent the power levels needed to carry out different

functions.

3. Flight Mode

: The text next to this icon indicates the current ight mode.

Tap to congure the MC (Main Controller) Settings. These settings allow you to modify ight limits

and set gain values.

4. Camera Parameters

Displays camera settings parameters and capacity.

(1) Tap to set the white balance parameters.

(2) Tap

4KP3020:12 384G

D TI

4KP30

to set the photo and video parameters.

5. GPS Signal Strength

: Shows the current GPS signal strength. White bars indicate adequate GPS strength.

6. Obstacle Sensing Function Status

: Tap into this button to enable or disable features provided by the Vision System.

7. Remote Controller Signal Strength

: This icon shows the strength of the remote controller signal.

8. HD Video Link Signal Strength

: This icon shows the strength of the HD video downlink connection between the aircraft

and the remote controller.

9. Focus/Metering Button

/ : Tap to switch between focus and metering mode. Tap to select object for focusing or

metering.

10. Battery Level

: This icon shows the current battery level.

Tap to view the battery information menu, set the various battery warning thresholds, and view

the battery warning history.

11. General Settings

: Tap to enter general setting menu for setting metrics, enabling livestream, display ight

routes and so on.

12. AF/MF

: Tap to switch the focus mode.

13. Auto Exposure Lock

: Tap to lock the exposure value.

INSPIRE 2

User Manual

14. Photo/Video Button

: Tap to switch between photo and video recording modes.

15. Gimbal Slider

: Displays the pitch of the gimbal.

16. Shoot / Record Button

/ : Tap to start shooting photos or recording video.

17. Camera Settings

: Tap to set ISO, shutter and auto exposure values of the camera.

18. Playback

: Tap to enter the playback page and preview photos and videos as soon as they are captured.

19. Manual Focus

Only effective in MF mode.

20. FPV

FPV only for tablet. Pinch to zoom in or out the window.

: Red bars are displayed when obstacles are close to the aircraft. Orange bars are

displayed when obstacles are in detection range.

：Tap to zoom in the FPV window to the middle of the screen.

21. Flight Telemetry

10.0

VS 2.0M/S VPS 2.0MH.S 10.0 KM/H

(1) Tap to switch to the map view.

(2) Flight Attitude and Radar Function:

The red arrow shows which direction the aircraft is facing.

The ratio of the gray area to the blue area indicates the aircraft’s pitch.

The horizontal level of the gray area indicates the aircraft’s roll angle.

INSPIRE 2

User Manual

Blue line indicates the current position of the gimbal’s tilt motor.

The outmost grey circle displays current power capacity.

(3) Flight Parameters:

Altitude: Vertical distance from the Home Point.

Distance: Horizontal distance from the Home Point.

Vertical Speed: Movement speed across a vertical distance.

Horizontal Speed: Movement speed across a horizontal distance.

(4) Aircraft Distance:

The horizontal distance between the aircraft and the operator.

22. Spotlight Pro

:Tap to use the Spotlight Pro function.

23. Intelligent Flight Mode

: Display the current mode. Tap to select Intelligent Flight Mode.

24. Smart RTH

: Initiate RTH home procedure. Tap to have the aircraft return to the last recorded home

point.

25. Gimbal Working Modes

Follow mode, free mode and reset mode are included.

26. Auto Takeoff/Landing

/ : Tap to initiate auto takeoff or landing.

27. Livestream

: This icon indicates the current video feed is being broadcast live on YouTube. Ensure that

mobile data service is available on your mobile device.

28. Back

: Tap this icon to return to the main menu.

Editor

An intelligent video editor is built into the DJI GO 4 app. After recording several video clips and

downloading them to your mobile device, go to Editor on the home screen. You can then select a

template and a specied number of clips which are automatically combined to create a short lm

that can be shared immediately.

SkyPixel

Find out about our latest events, featured products and trending Skypixel uploads in the SkyPixel

page.

If you already have a DJI account, you will be able to participate in forum discussions, earn Credits

in the DJI Store, and share your artwork with the community.

Flight

This chapter describes the flight safety

and ight restrictions.

Flight

Once pre-ight preparation is complete, it is recommended that you use the ight simulator in the

DJI GO 4 app to hone your ight skills and practice ying safely. Ensure that all ights are carried

out in an open area.

Flight Environment Requirements

1. Do not use the aircraft in severe weather conditions. These include wind speeds exceeding 10

m/s , snow, rain and fog.

2. Only y in open areas. Tall structures and large metal structures may affect the accuracy of the

on-board compass and GPS system.

3. Avoid obstacles, crowds, high voltage power lines, trees, and bodies of water.

4. Minimize interference by avoiding areas with high levels of electromagnetism, including base

stations and radio transmission towers.

5. Aircraft and battery performance is subject to environmental factors such as air density and

temperature. Be very careful when ying at high altitudes, as the performance of the battery and

aircraft may be affected.

6. The compass and GPS will not work in Polar Regions. The aircraft will auto switch to A-mode and

use the Vision System for positioning.

Flight Limits and No-Fly Zones

All unmanned aerial vehicle (UAV) operators should abide by all regulations set forth by government

and regulatory agencies including the ICAO and the FAA. For safety reasons, ights are limited by

default, which helps users operate this product safely and legally. Flight limitations include height

limits, distance limits, and No-Fly Zones.

When operating in P-mode, height limits, distance limits, and No-Fly Zones function concurrently to

manage ight safety. In A-mode, only height limits are in effect, which by default prevent the aircraft

altitude from exceeding 1640 feet (500 m) .

Maximumightaltitude&RadiusLimits

Maximum ight altitude and radius limits may be changed in the DJI GO 4 app. Be aware that the

maximum ight altitude cannot exceed 1640 feet (500 meters). In accordance with these settings,

your Inspire 2 will y in a restricted cylinder, as shown below:

Max Height

Max Radius

Home Point

Height of aircraft

when powered on

INSPIRE 2

User Manual

If the aircraft ies out of the limit, you can still control the aircraft, but you cannot y it any

farther.

If the aircraft ies out of the max radius it will y back within range automatically when GPS

signal is strong.

No-Fly Zones

All No-Fly Zones are listed on the DJI official website at http://www.dji.com/flysafe/no-fly. No-Fly

Zones are divided into Airports and Restricted Areas. Airports include major airports and flying

elds where manned aircraft operate at low altitudes. Restricted Areas include borders between

countries or sensitive sites. The details of the No-Fly Zones are explained below:

Airport:

(1) Airport No-Fly Zone are comprised of Take-off Restricted zones and Restricted Altitude Zones.

Each zone features circles of various sizes.

(2) R1 miles (value of the R1 depends on the size and shape of the airport) around the airport is a

Take-off restricted zone, inside of which take off is prevented.

(3) From R1 mile to R1 + 1 mile around the airport the flight altitude is limited to a 15 degree

inclination. Starting at 65 feet (20 meters) from the edge of airport and radiating outward. The

ight altitude is limited to 1640 feet (500 meters) at R1+1 mile.

(4) When the aircraft enters within 320 feet (100 meters) of No-Fly Zones, a warning message will

appear on the DJI GO 4 app.

GPS Signal Strong Blinking Green

Flight Limits DJI GO 4 App Aircraft Status Indicator

Maximum Flight

Altitude

Aircraft's altitude cannot

exceed the specied value.

Warning: Height

limit reached.

None.

Max Radius

Flight distance must be

within the max radius.

Warning: Distance

limit reached.

Rapid red ashing

when close to the

max radius limit.

GPS Signal Weak Blinking Yellow

Flight Limits DJI GO 4 App

Aircraft Status

Indicator

Maximum

Flight

Altitude

Height is restricted to 26 feet

(8 meters) when the GPS signal

is weak and Vision Positioning

is activated. Height is restricted

to 164 feet (50 meters) when the

GPS signal is weak and Vision

Positioning is inactivated.

Warning:

Height limit reached.

None.

Max Radius No limits

INSPIRE 2

User Manual

Restricted Areas:

(1) Restricted Areas does not have ight altitude restrictions.

(2) R miles around the designated restriction area is a Take-off Restricted area. Aircraft cannot take

off within this zone. The value of R varies based on the denition of the restricted areas.

(3) A “warning zone” has been set around the Restricted Area. When the aircraft approaches within

0.062 miles (100 m) of this zone, a warning message will appear on the DJI GO 4 app.

Restricted Areas

66 feet

1 mile

320 feet

100m R

Airports

1640

feet

Restricted Areas

66 feet

1 mile

320 feet

100m R

Airports

1640

feet

INSPIRE 2

User Manual

GPS Signal Strong Blinking Green

Zone Restriction DJI GO 4 app Prompt

Aircraft

Status

Indicator

No-y Zone

Motors will not start.

Warning: You are in a No-fly

zone. Take off prohibited.

Red ashing

If the aircraft enters the

restricted area in A-mode,

but is switched to P-mode,

the aircraft will automatically

descend, land, and stop its

motors.

Warning: You are in a no-y

zone. Automatic landing has

begun.

Restricted-

altitude ight

zone

If the aircraft enters the

restricted area in A-mode, but

is switched to P-mode, it will

descend to an appropriate

altitude and hover 15 feet

below the altitude limit.

R1: Warning: You are in a

restricted zone. Descending to

safe altitude.

R2: Warning: You are in a

restricted zone. Maximum ight

altitude is restricted to between

20m and 500m. Fly cautiously.

Warning zone

No flight restriction applies,

but there will be a warning .

Warning: You are approaching

a restricted zone, Fly cautiously.

Free zone

No restrictions. None. None.

Semi-automatic descent: All stick commands are available except the left stick command

during the descent and landing process. Motors will stop automatically after landing.

When flying in a safety zone, the aircraft's status indicator will blink red rapidly and

continue for 3 seconds, then switch to indicate current ying status and continue for 5

seconds at which point it will switch back to blinking red.

For safety reasons, please do not y close to airports, highways, railway stations, railway

lines, city centers, or other sensitive areas. Fly the aircraft only within your line of sight.

PreightChecklist

1. Remote controller, Intelligent Flight Battery, and mobile device are fully charged.

2. Propellers are mounted correctly and rmly.

3. Micro SD card has been inserted, if necessary.

4. Gimbal is functioning normally.

5. Motors can start and are functioning normally.

6. The DJI GO 4 app is successfully connected to the aircraft.

7. Ensure that the sensors for the Obstacle Sensing System are clean.

INSPIRE 2

User Manual

Calibrating the Compass

Only calibrate the compass when the DJI GO 4 app or the status indicator prompt you to do so.

Observe the following rules when calibrating your compass:

DO NOT calibrate your compass where there is a chance of strong magnetic interference,

such as magnetite, parking structures, and steel reinforcements underground.

DO NOT carry ferromagnetic materials with you during calibration such as cellular phones.

The DJI GO 4 app will prompt you to resolve the compass issue if the compass is affected

by strong interference after calibration is complete. Follow the prompted instructions to

resolve the compass issue.

Calibration Procedures

Choose an open area to carry out the following procedures.

1. Tap the Aircraft Status Bar in the app and select “Calibrate”, then follow the on-screen

instructions.

2. Hold the aircraft horizontally and rotate 360 degrees. The Aircraft Status Indicators will display a

solid green light.

3. Hold the aircraft vertically, with nose pointing downward, and rotate it 360 degrees around the

center axis. Recalibrate the compass if the Aircraft Status Indicator glows blinking red.

INSPIRE 2

User Manual

If the Aircraft Status Indicator blinks red and yellow after the calibration procedure, move

your aircraft to a different location and try again.

DO NOT calibrate the compass near metal objects such as a metal bridge, cars,

scaffolding.

If the aircraft status indicators are blinking red and yellow alternately after placing the aircraft

on the ground, the compass has detected magnetic interference. Change your location.

Auto Take-off and Auto Landing

Auto Takeoff

Use auto takeoff only if the Aircraft Status Indicators are blinking green. Follow the steps below to

use the auto takeoff feature:

1. Launch the DJI GO 4 app, and enter “Camera” page.

2. Complete all steps on the pre-ight checklist.

3. Tap“

”, and conrm that conditions are safe for ight. Slide the icon to conrm and takeoff.

4. Aircraft takes off and hovers at (1.2 meters) above ground.

Aircraft Status Indicator blinks rapidly when it is using the Vision System for stabilization.

The aircraft will automatically hover below 10 meters. It is recommended to wait until there

is sufcient GPS lock before using the Auto Take-off feature.

Auto-Landing

Use auto-landing only if the Aircraft Status Indicator is blinking green. Follow the steps below to use

the auto-landing feature:

1. Tap on

, to ensure the landing condition is ideal. Slide to conrm.

2. Abort landing process immediately by using the

button on the screen.

3. a. When Landing Protection determines that the ground is suitable for landing, the Inspire 2 will

land gently.

b. If Landing Protection determines that the ground is not suitable for landing, the Inspire 2 will

hover and wait for pilot conrmation.

c. If Landing Protection is not operational, the DJI GO 4 app will display a landing prompt when

the Inspire 2 descends below 0.7 meters. Pull down on the throttle or use the auto landing

slider to land.

4. Aircraft will land and turn off automatically.

Starting/Stopping the Motors

Starting Motors

A Combination Stick Command (CSC) is used to start the motors. Push both sticks to the bottom in-

ner or outer corners to start the motors. Once the motors have started spinning, release both sticks

simultaneously.

INSPIRE 2

User Manual

Stopping the Motors

There are two methods to stop the motors.

Method 1: When Inspire 2 has landed, push the left stick down , then conduct the same CSC that

was used to start the motors, as described above . Motors will stop immediately. Release both

sticks once motors stop.

Method 2: When the aircraft has landed, push and hold the left stick down. The motors will stop

after three seconds.

Do not perform CSC when aircraft is in midair, otherwise the motors will be stopped.

StoptheMotorMid-ight

Pull the left stick to the bottom inside corners and press the RTH button at the same time.

Only stop

the motors mid-ight in emergency situations when doing so can reduce the risk of damage or

injury.

Method 1 Method 2

Flight Test

Takeoff/Landing Procedures

1. Place the aircraft in an open, at area with the battery level indicators facing towards you.

2. Turn on the remote controller and your mobile device, then turn on the Intelligent Flight Battery.

3. Launch the DJI GO 4 app and enter the Camera page.

4. Wait until the Aircraft Indicators blink green. This means the Home Point is recorded and it is now

safe to y. If they ash yellow, the Home Point has not been recorded.

5. Push the left stick up slowly to take off or use Auto Takeoff.

6. Shoot photos and videos using the DJI GO 4 app.

7. To land, hover over a level surface and gently pull down on the left stick to descend.

8. After landing, execute the CSC command or hold the left stick at its lowest position until the mo-

tors stop.

9. Turn off the Intelligent Flight Battery rst, then the Remote Controller.

Please check that CSC is activated inside DJI GO 4 app, then the user can stop the

aircraft mid-air.

INSPIRE 2

User Manual

When the Aircraft Status Indicators blink yellow rapidly during ight, the aircraft has entered Failsafe

mode.

A low battery level warning is indicated by the Aircraft Status Indicators blinking red slowly

or rapidly during ight.

Watch our video tutorials for more ight information.

Video Suggestions and Tips

1. Go through the full pre-ight checklist before each ight.

2. Select the desired gimbal operation mode in the DJI GO 4 app.

3. Only shoot video when ying in P-mode.

4. Always y in good weather and avoid ying in rain or heavy wind.

5. Choose the camera settings that suit your needs. Settings include photo format and exposure

compensation.

6. Perform ight tests to establish ight routes and preview scenes.

7. Push the control sticks gently to keep the aircraft’s movement smooth and stable.

Appendix

Specications

Aircraft

Model T650

Weight 7.25 lbs (3290 g, including two batteries, without gimbal and camera)

Max Takeoff Weight 4000 g

GPS Hovering Accuracy

Vertical: ±1.64 feet (0.5 m) or ±0.33 feet (0.1 m, Downward Vision

System enabled)

Horizontal: ±4.92 feet (1.5 m) or ±0.98 feet (0.3 m, Downward Vision

System enabled)

Max Angular Velocity

Pitch: 300°/s

Yaw: 150°/s

Max Tilt Angle

P-mode: 35° (Forward Vision System enabled: 25°); A-mode: 35°;

S-mode: 40°

Max Ascent Speed P-mode/A-mode: 16.4 ft/s (5 m/s); S-mode: 19.7 ft/s (6 m/s)

Max Descent Speed Vertical: 13.1 ft/s (4 m/s); Tilt: 13.1-29.5 ft/s (4-9 m/s)

Max Takeoff Sea Level 1.55 mi (2500 m); 3.1 mi (5000 m with specially-designed propeller)

Max Wind Speed Resistance 10 m/s

Max Flight Time Approx. 25 min (with Zenmuse X5S)

Motor Model DJI 3512

Propeller Model DJI 1550T

Indoor Hovering Enabled by default

Operating Temperature -4° to 104° F (-20° to 40° C)

Diagonal Distance

(propeller excluded)

23.8 inch (605 mm, Landing Mode)

Max Speed 58 mph (94 kph)

Gimbal and Camera (Optional, take the Zenmuse X5S for example)

General

Name Zenmuse X5S

Dimensions 140×98×132 mm

Weight

Approx. 461 g( Including original lens, balancing ring, lens hood)

Camera

Supported Lens

DJI MFT 15mm/1.7 ASPH (With Balancing Ring and Lens Hood)

Panasonic Lumix 15mm/1.7 (With Balancing Ring and Lens Hood)

Panasonic Lumix 14-42mm/3.5-5.6 HD (With Balancing Ring)Olympus

M.Zuiko 12mm/2.0 (With Balancing Ring)

Olympus M.Zuiko 17mm/1.8 (With Balancing Ring)

Olympus M.Zuiko 25mm/1.8 (With Balancing Ring)

Olympus M.Zuiko 45mm/1.8 (With Balancing Ring)

Olympus M.Zuiko 9-18mm/4.0-5.6 (With Balancing Ring)

Sensors CMOS, 4/3” Effective Pixels: 20.8MP

INSPIRE 2

User Manual

FOV 72° (with DJI MFT 15mm/1.7 ASPH )

Photo Resolutions

4:3, 5280×3956

16:9, 5280×2970

Video Resolutions

H.264

C4K: 4096×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps

4K: 3840×2160 23.976/24/25/29.97/47.95/50/59.94p @100Mbps

3840×1572 23.976/24/25/29.97p @100Mbps

2.7K: 2720×1530 23.976/24/25/29.97p @80Mbps

47.95/50/59.94p @100Mbps

FHD: 1920×1080 23.976/24/25/29.97p @60Mbps

47.95/50/59.94p @80Mbps 119.88p @100Mbps

H.265

C4K: 4096×2160 23.976/24/25/29.97p @100Mbps

4K: 3840×2160, 3840×1572 23.976/24/25/29.97p @100Mbps

2.7K: 2720×1530 23.976/24/25/29.97p @65Mbps

47.95/50/59.94p @80Mbps

FHD: 1920×1080 23.976/24/25/29.97p @50Mbps

47.95/50/59.94p @65Mbps 119.88p @100Mbps

C-DNG RAW

5.2K: 5280×2972 23.976/24/25/29.97p, up to 4.2Gbps

4K: 4096×2160, 3840×2160 23.976/24/25/29.97p, up to 2.4Gbps

4K: 4096×2160, 3840×2160 50/59.94p, up to 4.0Gbps ProRes

5.2K: 5280×2160 23.976/24/25/29.97p, 422 HQ @1.3Gbps

4K: 3840×2160 23.976/24/25/29.97p, 422 HQ @900Mbps

4K: 3840×2160 23.976/24/25/29.97p, 4444 XQ @2.0Gbps

Photo Formats

SSD: DNG

Micro SD: DNG, JEPG, DNG+JEPG

Video Formats

SSD: CinemaDNG, ProRes

Micro SD: MOV, MP4

Operation Modes Capture, Record, Playback

Still Photography Modes

Micro SD: Single shot, Burst shooting (3/5/7/10/14 frames), Auto

Exposure Bracketing (3/5 bracketed frames at 0.7EV bias), Interval

SSD: RAW BURST (3/5/7/10/14/∞ frames)

Exposure Mode Auto, Manual, Shutter Priority, Aperture Priority

Exposure Compensation ±3.0 (1/3 increments)

Metering Mode Center-weighted metering, Spot metering (area option 12×8)

AE Lock Supported

Electronic Shutter Speed 8-1/8000s

White Balance

Auto, Sunny, Cloudy, Incandescent, Neon

Custom (2000K–10000K)

ISO Range

100 – 6400 (Video)

100 – 25600 (Stills)

Video Captions Supported

INSPIRE 2

User Manual

Anti-Flicker Auto, 50Hz, 60Hz

PAL/NTSC Supported

Environmental

Operating Temperature 14° to 104°F (-10 to 40℃)

Storage Temperature -4° to 140° F (-20 to 60 ℃)

Gimbal

Angular Vibration Range ±0.01°

Controllable Range Pitch: -130° to +40°; Roll: ±20°; Pan: ±320°

Max Controllable Speed Pitch: 180°/s; Roll:180°/s; Pan:270°/s

Interface Type DGC2.0

Mechanical Range Pitch: -140° to +50°; Roll: -50° to +90°; Pan: ±330°

Remote Controller

Model GL6D10A

Operating Frequency 2.400-2.483 GHz; 5.725-5.825 GHz

Max Transmitting Distance

2.4 GHz: 4.3 miles (7 km, FCC); 2.2 miles (3.5 km, CE);

2.5 miles (4 km, SRRC)

5.8 GHz: 4.3 miles (7 km, FCC); 1.2 miles (2 km, CE);

3.1 miles (5 km, SRRC)

EIRP

2.4 GHz: 26 dBm (FCC); 17 dBm (CE); 20 dBm (SRRC)

5.8 GHz: 28 dBm (FCC); 14 dBm (CE); 20 dBm (SRRC)

Video Output Ports USB, HDMI

Power Supply Built-in battery

Charging DJI charger

Dual User Capability Host-and-Slave connection

Mobile Device Holder Tablet or Smart Phone

Max Mobile Device Width 170 mm

Output Power 9W (Without supplying power to smart device)

Operating Temperature -4° to 104° F (-20° to 40° C)

Storage Temperature

Less than 3 months: -4° to 113° F (-20° to 45° C)

More than 3 months: 72° to 82° F (22° to 28° C)

Charging Temperature 32° to 104° F (0° to 40° C)

Battery 6000 mAh 2S LiPo

USB Supply Power iOS: 1 A @ 5.2 V (Max); Android: 1.5 A @ 5.2 V (Max)

Charger

Model IN2C180

Voltage 26.1 V

Rated Power 180 W

Battery (Standard)

Name Intelligent Flight Battery

Model TB50-4280mAh-22.8V

Capacity 4280 mAh

INSPIRE 2

User Manual

Voltage 22.8 V

Battery Type 6S LiPo

Energy 97.58 Wh

Net Weight 515 g

Operating Temperature -4° to 104° F (-20° to 40° C)

Storage Temperature

Less than 3 months: -4° to 113° F (-20° to 45° C)

More than 3 months: 72° to 82° F (22° to 28° C)

Charging Temperature 41° to 104° F (5° to 40° C)

Max Charging Power 180 W

Charging Hub (Model: IN2CH)

Input Voltage 26.1 V

Input Current 6.9 A

Downward Vision System

Velocity Range <32.8 ft/s (10 m/s) at height of 6.56 feet (2 m)

Altitude Range <32.8 feet (10 m)

Operating Range <32.8 feet (10 m)

Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)

Ultrasonic Sensor Operating

Range

0.33-16.4 feet (10-500 cm)

Ultrasonic Sensor Operating

Environment

Non-absorbing material, rigid surface (thick indoor carpeting will

reduce performance)

Forward Vision System

Obstacle Sensing Range 2.3-98.4 feet (0.7-30 m)

FOV Horizontal: 60°; Vertical: 54°

Operating Environment Surfaces with clear patterns and adequate lighting (> 15 lux)

Upward Infrared Sensing System

Obstacle Sensing Range 0-16.4 feet (0-5 m)

FOV ±5°

Operating Environment Large, diffuse and reective obstacles (reectivity >10%)

Aircraft Status Indicator Description

Normal

Red, Green and Yellow Flash

Alternatively

Power on and self-check

Green and Yellow Flash Alterna-

tively

Aircraft warming up

Green Flashes Slowly Safe to Fly (P mode with GPS and Vision System)

X2 Green Flashes Twice Safe to Fly (P mode with Vision System but without GPS)

Yellow Flashes Slowly Safe to Fly (A mode but No GPS and Vision System)

INSPIRE 2

User Manual

Warning

Fast Yellow Flashing Remote Controller Signal Lost

Slow Red Flashing Low Battery Warning

Fast Red Flashing Critical Low Battery Warning

Red Flashing Alternatively IMU Error

—

Solid Red Critical Error

Red and Yellow Flash Alternatively Compass Calibration Required

Upgrading the Firmware

Use DJI Assistant 2 or the DJI GO 4 app to upgrade aircraft and Remote Controller.

Upgrading the Aircraft Firmware

Method 1: Using the DJI Assistant 2

1. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch down.

2. Connect the Inspire 2 and the PC via the USB cable (with Double A ports).

3. Launch DJI Assistant 2 and login with a DJI account.

4. Click Inspire 2 and the rmware update button.

5. Select the rmware version required.

6. DJI Assistant 2 will download and upgrade the rmware automatically.

7. Restart the aircraft after the rmware upgrade is complete.

Method 2: Using the DJI GO 4 App

1. Power on the Intelligent Flight Battery, and toggle the USB Mode Switch up.

2. Connect the aircraft and your mobile device via an appropriate USB cable.

3. Follow the on-screen instructions in the DJI GO 4 app to upgrade. Ensure to connect to the Inter-

net when downloading the rmware.

4. Restart the aircraft after the rmware update is complete.

During update, the aircraft start a quick single beep continuously. Then the warning

sound will alternate between a longer beep and a quick double beep once the update is

complete. Restart the aircraft after the rmware update is complete.

If the warning sound turns into a long beep, retry the update.

The battery level should be above 30% for the rmware update process.

When using the DJI GO 4 app to update, you may disconnect the aircraft and the mobile

device once the update is more than 30% completed. No Internet connection is required.

INSPIRE 2

User Manual

Upgrading the Remote Controller Firmware

Method 1: Using the DJI GO 4 App

Power on the remote controller and connect it with the DJI GO 4 app. A prompt will appear if a new

firmware upgrade is available. To start upgrading, connect a mobile device to the Internet and

follow the on-screen instructions.

The rmware update will take around 15 minutes. It is normal that the gimbal will go limp,

the aircraft status indicator blinks abnormally and the aircraft reboots. Wait patiently until

the update is complete.

Ensure the computer has access to the Internet.

Ensure the battery level is adequate for the remote controller.

Do not disconnect the aircraft from the computer during rmware upgrade.

INSPIRE 2

User Manual

Compliance Information

FCC Compliance Notice

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two

conditions: (1) This device may not cause harmful interference, and (2) This device must accept

any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device,

pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection

against harmful interference in a residential installation. This equipment generates, uses and can

radiate radio frequency energy and, if not installed and used in accordance with the instructions,

may cause harmful interference to radio communications. However, there is no guarantee that

interference will not occur in a particular installation. If this equipment does cause harmful

interference to radio or television reception, which can be determined by turning the equipment

off and on, the user is encouraged to try to correct the interference by one or more of the following

measures:

— Reorient or relocate the receiving antenna.

— Increase the separation between the equipment and receiver.

— Connect the equipment into an outlet on a circuit different from that to which the receiver is

connected.

— Consult the dealer or an experienced radio/TV technician for help.

RF Exposure Information

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits,

human proximity to the antenna shall not be less than 20cm during normal operation.

IC Radiation Exposure Statement:

This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled

environment. This transmitter must not be co-located or operating in conjunction with any other

antenna or transmitter.

This equipment should be installed and operated with minimum distance 20cm between the

radiator& your body.

Any Changes or modifications not expressly approved by the party responsible for compliance

could void the user’s authority to operate the equipment.

KCC Warning Message

“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”

“해당 무선설비는 운용 중 전파혼신 가능성이 있음”

NCC Warning Message

低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者均不得擅自變更頻率、

加大功率或變更原設計之特性及功能。

INSPIRE 2

User Manual

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象時，應改善至

無干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。低功率射頻電機須忍受

合法通信或工業、科學及醫療用電波輻射性電機設備之干擾。

EU Compliance Statement: SZ DJI TECHNOLOGY CO., LTD. hereby declares that this device is in

compliance with the essential requirements and other relevant provisions of the Directive 1999/5/

EC.

A copy of the EU Declaration of Conformity is available online at www.dji.com/euro-compliance

Declaración de cumplimiento UE: SZ DJI TECHNOLOGY CO., LTD. por la presente declara que

este dispositivo cumple los requisitos básicos y el resto de provisiones relevantes de la Directiva

1999/5/EC.

Hay disponible online una copia de la Declaración de conformidad UE en www.dji.com/euro-

compliance

EU-verklaring van overeenstemming: SZ DJI TECHNOLOGY CO., LTD. verklaart hierbij dat dit

apparaat voldoet aan de essentiële vereisten en andere relevante bepalingen van Richtlijn 1999/5/

EC.

De EU-verklaring van overeenstemming is online beschikbaar op www.dji.com/euro-compliance

Declaração de conformidade da UE: A SZ DJI TECHNOLOGY CO., LTD. declara, através deste

documento, que este dispositivo está em conformidade com os requisitos essenciais e outras

disposições relevantes da Diretiva 1999/5/EC.

Existe uma cópia da Declaração de conformidade da UE disponível online em www.dji.com/euro-

compliance

Dichiarazione di conformità UE: SZ DJI TECHNOLOGY CO., LTD. dichiara che il presente

dispositivo è conforme ai requisiti essenziali e alle altre disposizioni rilevanti della direttiva 1999/5/

EC.

Una copia della dichiarazione di conformità UE è disponibile online all'indirizzo Web www.dji.com/

euro-compliance

Déclaration de conformité UE : Par la présente, SZ DJI TECHNOLOGY CO., LTD déclare que cet

appareil est conforme aux principales exigences et autres clauses pertinentes de la directive

européenne 1999/5/EC.

Une copie de la déclaration de conformité UE est disponible sur le site www.dji.com/euro-

compliance

EU-Compliance: Hiermit erklärt SZ DJI TECHNOLOGY CO., LTD., dass dieses Gerät den

wesentlichen Anforderungen und anderen einschlägigen Bestimmungen der EU-Richtlinie 1999/5/

EC entspricht.

Eine Kopie der EU-Konformitätserklärung nden Sie online auf www.dji.com/euro-compliance.

EU contact address: DJI GmbH, Industrie Strasse. 12, 97618, Niederlauer, Germany

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE

OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS

INSPIRE 2

User Manual

Environmentally friendly disposal

Old electrical appliances must not be disposed of together with the residual waste, but have to be

disposed of separately. The disposal at the communal collecting point via private persons is for

free. The owner of old appliances is responsible to bring the appliances to these collecting points

or to similar collection points. With this little personal effort, you contribute to recycle valuable raw

materials and the treatment of toxic substances.

Mexico Warning message

“La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este

equipo o dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar

cualquier interferencia, incluyendo la que pueda causar su operación no deseada.”

Thailand Warning message

เครื่องโทรคมนาคมและอุปกรณ์นี้

มีความสอดคล้องตามข้อกำาหนดของ

กทช

After-Sales Information

Visit the following pages to learn more about After-sales policy and warranty information:

1. After-sales Policy: http://www.dji.com/service

2. Refund Policy: http://www.dji.com/service/refund-return

3. Paid Repair Service: http://www.dji.com/service/repair-service

4. Warranty Service: http://www.dji.com/service/warranty-service

This content is subject to change.

Download the latest version from

www.dji.com/inspire-2

If you have any questions about this document, please contact DJI by

sending a message to

DocSupport@dji.com

DJI Inspire 2 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van DJI Inspire 2

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info