594196
8
Verklein
Vergroot
Pagina terug
1/65
Pagina verder
INSPIRE 1
V1.4
2015.7
User Manual
2
©
2015 DJI. All Rights Reserved.
Using this manual
Legends
Warning Important Hints and Tips Reference
Before Flight
The following tutorials and manuals have been produced to ensure you to make full use of your Inspire 1.
1.Disclaimer
2.In the Box
3.Inspire 1 Quick Start Guide
4.Safety Guidelines
5.Inspire 1 User Manual
6.Intelligent Flight Battery Safety Guidelines
Watching all the tutorial videos and reading the Disclaimer before ight is recommended. Afterwards,
prepare for your first flight by using the Inspire 1 Quick Start Guide. Refer to this manual for more
comprehensive information.
Watch the video tutorials
Please watch the tutorial video below to learn how to use Inspire 1 correctly and safely:
www.dji.com/product/inspire-1/video
Download the DJI Pilot app
Download and install the DJI Pilot app before use. Scan the QR code or visit
“http://m.dji.net/djipilot” to download the app.
For the best experience, use mobile device with Andriod V 4.1.2 or above. Requires iOS 8.0 or later.
©
2015 DJI. All Rights Reserved.
3
Contents
Using this manual
Legends 2
Before Flight 2
Watch the video tutorials 2
Download the DJI Pilot app 2
ProductProle
Introduction 6
Feature Highlights 6
Assemble the Aircraft 7
Aircraft Diagram 9
Remote Controller Diagram 9
Aircraft
Flight Controller 12
Flight Mode 12
Flight Status Indicator 12
Return to Home (RTH) 13
Dynamic Home Point 15
Vision Positioning System 16
Flight Recorder 17
Attaching and Detaching the Propellers 17
DJI Intelligent Flight Battery 18
Remote Controllers
RemoteControllerProle 24
RemoteControllerOperations 24
Dual Remote Controllers Mode 29
Remote Controller Status LED 31
Linking the Remote Controller 32
Remote Controller Compliance Version 33
Gimbal and Camera
CameraProle 35
Gimbal 36
4
©
2015 DJI. All Rights Reserved.
DJI Pilot App
Camera 40
Map 43
Academy 43
UserCenter 43
Flight
FlightEnvironmentRequirements 45
FlightLimitsandFlightRestrictionArea 45
PreightChecklist 49
CalibratingtheCompass 49
AutoTake-offandAutoLanding 50
Starting/Stopping the Motors 51
Flight Test 51
FAQ
Appendix
Specications 57
IntelligentOrientationControl(IOC) 60
How to Update Firmware 61
FCC Compliance 62
©
2015 DJI. All Rights Reserved.
5
ProductProle
This chapter describes the features of
Inspire 1, instructs you to assemble the
aircraft and explains the components on
the aircraft and remote controllers.
6
©
2015 DJI. All Rights Reserved.
Product Profile
ProductProle
Introduction
The Inspire 1 is brand new quadcopter capable of capturing 4K video and transmitting an HD video
signal (up to 2km) to multiple devices straight out of the box. Equipped with retractable landing gear, it
can capture an unobstructed 360 degree view from its camera. The built-in camera has an integrated
gimbal to maximize stability and weight efficiency while minimizing space. When no GPS signal is
available, Vision Positioning technology provides hovering precision.
Feature Highlights
Camera and Gimbal: Up to 4K video recording and 12 megapixel photo capture. Reserved mounting
space for ND filters for better exposure control. New quick-release mount allows you to remove the
camera with ease.
HD Video Downlink: Low latency, HD downlink powered by an enhanced version of the DJI Lightbridge
system. It also provides dual controllers mode.
Landing gear: Retractable landing gear that enables an unobstructed panoramic view from the camera.
DJI Intelligent Flight Battery: 4500 mAh DJI Intelligent Flight Battery employs new battery cells and a
battery management system.
Flight Controller: The next generation ight controller system provides a more reliable ight experience.
A new ight recorder stores the ight data from each ight, and Vision Positioning enhances hovering
precision when no GPS is available.
Assemble the Aircraft
Unlocking Travel Mode
The aircraft is in Travel Mode during delivery. Follow these steps to change it to Landing Mode before
your rst ight:
1. Insert the Intelligent Flight Battery into the battery compartment.
2. Power on the Remote Controller and the Intelligent Flight Battery.
3. Toggle the Transformation Switch up and down at least four times.
4. Power off the aircraft.
Travel Mode Toggle×4 Landing Mode
©
2015 DJI. All Rights Reserved.
7
Product Profile
INSPIRE 1
User Manual
Battery must be fully charged before using it for the rst time. Refer to "Charging the Intelligent
Flight Battery" (P21) for more information .
If you have purchased the dual remote controller version, you must use the Master remote
controller to deactivate Travel Mode. Refer to "Setting Up Dual Remote Controllers Mode" (P30)
section for more infromation about Master remote controller.
Be sure to remove the gimbal from the aircraft before switch from Landing Mode to Travel Mode.
Place the aircraft on the smooth and reective surface (e.g. table or tile) before switching between
the travel modes to the landing mode. Do not place the aircraft on the rough and sound-absorbing
surface (e.g. carpet) before switching between the travel modes and landing mode.
Installing Gimbal and Camera
1. Remove Gimbal Cover.
2. Rotate the Gimbal Lock to the unlocked position (to the right when facing the nose of the aircraft).
3. Insert the gimbal by aligning the white mark on the Gimbal.
4. Rotate the Gimbal Lock back into the locked position.
Ensure the Micro-SD card is correctly inserted into the camera.
Locked
Gimbal Connector
Mounting Place
Gimbal Lock
Gimbal Cover
2
1
3
Attaching Propellers
Attach propellers with the black nut onto motors with the black dot and spin counter-clockwise to secure.
Attach propellers with gray nut onto motors without a black dot and spin clockwise to secure.
8
©
2015 DJI. All Rights Reserved.
Product Profile
INSPIRE 1
User Manual
Place all propellers onto the correct motor and tighten by hand to ensure security before ight.
Preparing Remote Controller
Tilt the Mobile Device Holder to the desired position then adjust the antenna as shown.
1. Press the button on the side of the Mobile Device Holder to release the clamp, adjust it to t then attach
your mobile device.
2. Connect your mobile device to the remote controller with a USB cable.
3. Plug one end of the cable into your mobile device, and the other end into the USB port on the back of
the remote controller.
Attaching1345sQuick-ReleasePropellers
The 1345s Quick-Release propeller is the upgrade version of the propellers that greatly enhance the
reliability of the propeller during the ight. Following the steps below to attach the 1345s Quick-Release
propellers.
1. Install the propellers with a white dot onto the mounting plates that have a white dot, and install the
propellers without a white dot onto the mounting plates that do not have a white dot.
2. Align the hook (A) on the propellers with the securing spring (B), then press down the propeller onto
the mounting plate then rotate the propellers according to the lock direction until it is secured.
Without
white dot
Without white dot
White dot
White dot
©
2015 DJI. All Rights Reserved.
9
Product Profile
INSPIRE 1
User Manual
Aircraft Diagram
[1]
[2]
[3]
[4]
[5]
[6]
[7]
[8]
[9]
[10 ]
[11 ]
[12 ]
[13 ]
GPS
Propeller (P17)
Motor
Front LED (P12)
Landing gear
Gimbal and Camera (P35)
Intelligent Flight Battery (P18)
Aircraft Micro-USB Port
Rear LED (P12)
Camera Micro-USB Port
Camera Micro-SD Card Slot (P35)
Vision Positioning Sensors (P16)
Aircraft Status Indicator (P13)
[12]
[13]
Remote Controller Diagram
[1] Antennas (P29)
Relays aircraft control and video signal.
[2] Mobile Device Holder
Mounting place for your mobile device.
[3] Control Stick
Controls aircraft orientation.
[4] ReturnHome(RTH)Button(P13)
Press and hold the button to initiate Return to
Home (RTH).
[5] Transformation Switch (P27)
Toggle the switch up or down to raise or lower
the landing gear.
[1]
[2]
[4]
[5]
[6]
[7]
[8]
[9]
[3]
[7]
[8]
[11]
[9]
[10]
[1]
[2]
[3]
[4]
[5]
[6]
10
©
2015 DJI. All Rights Reserved.
Product Profile
INSPIRE 1
User Manual
[6] Battery Level LEDs
Displays the current battery level.
[7] Status LED
Displays the power status.
[11]
[12]
[16] [17] [18] [19]
[10]
[13]
[14]
[15]
[8] Power Button
Used to power on or power off the remote controller.
[9] RTH LED
Circular LED around the RTH button displays RTH status.
[10] CameraSettingsDial
Turn the dial to adjust camera settings.
Only functions when the remote controller is
connected to a mobile device running the DJI
Pilot app.
[11] Playback Button
Playback the captured images or videos.
[12] Shutter Button
Press to take a photo. If in burst mode, the
set number of photos will be taken with one
press.
[13] Flight Mode Switch
Used to switch between P, A and F mode.
[14] VideoRecordingButton
Press to start recording video. Press again to
stop recording.
[15] Gimbal Dial
Use this dial to control the tilt of the gimbal.
[16] Mini-HDMI Port
Connect an HD compatible monitor to this
port to get a live HD video preview of what the
camera sees.
[17] Micro-USB Port
For connecting the remote controller to your
computer.
[18] CAN Bus Port
Reserved for future use.
[19] USB Port
Connect to mobile device to access all of the
DJI Pilot app controls and features.
[20]
[21]
[22]
[23]
[20] GPSModule
Used to pinpoint the location of the remote
controller.
[21] Back Left Button
Customizable button in DJI Pilot app.
[22] Power Port
Connect to a power source to charge the
remote controller’s internal battery.
[23] Back Right Button
Customizable button in DJI Pilot app.
©
2015 DJI. All Rights Reserved.
11
Aircraft
This chapter describes the features of
the Flight Controller, Vision Positioning
System and the Intelligent Flight Battery.
12
©
2015 DJI. All Rights Reserved.
Aircraft
Flight Status Indicator
The INSPIRE 1 comes with the Front LED, Rear LED and Aircraft Status Indicator. The positions of these
LEDs are shown in the gure below:
The Front and Rear LED show the orientation of the aircraft. The Front LED displays solid red and the
Rear LED displays solid green.
Aircraft Status Indicator shows the system status of the ight controller. Refer to the table below for more
information about the Aircraft Status Indicator:
Aircraft
Flight Controller
The Inspire 1’s ight controller is based on DJI ight controller with several enhancements such as new
ight mode and new safe mode. Three safe modes are available: Failsafe, Return Home and Dynamic
Home Point. These features ensure the safe return of your aircraft if the control signal is lost. A ight
recorder stores crucial ight data for each ight.
Flight Mode
Three ight modes are available. The details of each ight mode are found in the section below:
P mode (Positioning) : P mode works best when GPS signal is strong. There are three different states of P
mode, which will be automatically selected by the Inspire 1 depending on GPS signal strength and Vision
Positioning sensors:
P-GPS: GPS and Vision Positioning both are available, and the aircraft is using GPS for positioning.
P-OPTI: Vision Positioning is available but the GPS signal is not. Aircraft is using only Vision
Positioning for hovering
P-ATTI: Neither GPS or Vision Positioning available, aircraft is using only its barometer for positioning,
so only altitude is controlled.
A mode (Attitude): The GPS and Vision Positioning System is not used for holding position. The aircraft
only uses its barometer to maintain altitude. If it is still receiving a GPS signal, the aircraft can automatically
return home if the Remote Controller signal is lost and if the Home Point has been recorded successfully.
F mode (Function): Intelligent Orientation Control (IOC) is activated in this mode. For more information
about IOC, refer to the IOC in Appendix.
Use the Flight Controller mode switch to change the ight mode of the aircraft, refer to the “Flight
Mode Switch” on P27 for more information.
Front LED
Rear LED
Aircraft Status Indicator
©
2015 DJI. All Rights Reserved.
13
Aircraft
INSPIRE 1
User Manual
Aircraft Status Indicator Description
Normal
Red, Green and Yellow Flash
Alternatively
Power on and self-check
Green and Yellow Flash Alternatively Aircraft warming up
Green Flashes Slowly Safe to Fly (P mode with GPS and Vision Positioning)
X2 Green Flashes Twice Safe to Fly (P mode with Vision Positioning but without GPS)
Yellow Flashes Slowly Safe to Fly (A mode but No GPS and Vision Positioning)
Warning
Fast Yellow Flashing Remote Controller Signal Lost
Slow Red Flashing Low Battery Warning
Fast Red Flashing Critical Low Battery Warning
Red Flashing Alternatively IMU Error
Solid Red Critical Error
Red and Yellow Flash Alternatively Compass Calibration Required
Return to Home (RTH)
The Return to Home (RTH) brings the aircraft back to the last recorded Home Point. There are three cases
that will trigger RTH procedure; they are Smart RTH, Low Battery RTH and Failsafe RTH.
GPS
Description
Home Point
The Home Point is the location at which your aircraft takes off when the
GPS signal is strong. You can view the GPS signal strength through
the GPS icon ( ). If you are using the Dynamic Home Point
setting, the Home Point will be updated to your current position as you
move around and when the Aircraft Status Indicator blinks green.
Smart RTH
Using the RTH button on the remote controller (refer to “RTH button” on P28 for more information) or the
RTH button in the DJI Pilot app when GPS is available to enables smart RTH. The aircraft return to the
latest recorded Home Point, you may control the aircraft's orientation to avoid collision during the Smart
RTH. Press the Smart RTH button once to start the process, press the Smart RTH button again to exit
Smart RTH and regain the control.
14
©
2015 DJI. All Rights Reserved.
Aircraft
INSPIRE 1
User Manual
Battery Level
Warning
Remark
Aircraft Status
Indicator
DJI Pilot app Flight Instructions
Low battery
level warning
The battery
power is low.
Please land the
aircraft.
Aircraft status
indicator blinks
RED slowly.
Tap “Go-home” to have
the aircraft return to the
Home point and land
automatically, or “Cancel” to
resume normal ight. If no
action is taken, the aircraft
will automatically go home
and land after 10 seconds.
Remote controller will sound
an alarm.
Fly the aircraft
back and land
it as soon as
possible, then
stop the motors
and replace the
battery.
Critical Low
battery level
warning
The aircraft
must land
immediately.
Aircraft status
indicator blinks
RED quickly.
The DJI Pilot app screen will
ash red and aircraft starts to
descend. Remote controller
will sound an alarm.
The aircraft
will begin to
descend and land
automatically.
Estimated
remaining
ight time
Estimated
remaining ight
based on current
battery level.
N/A N/A N/A
Low Battery RTH
The low battery level failsafe is triggered when the DJI Intelligent Flight Battery is depleted to a point that
may affect the safe return of the aircraft. Users are advised to return home or land the aircraft immediately
when these warnings are shown. DJI Pilot app will advise user to return the aircraft to the Home Point
when low battery warning is triggered. Aircraft will automatically return to the Home Point if no action is
taken after 10 seconds countdown. User can cancel the RTH by pressing once on the RTH button. The
thresholds for these warnings are automatically determined based on the current aircraft altitude and its
distance from the Home Point.
Aircraft will land automatically if the current battery level can only support the aircraft to land to the ground
from the current altitude. User can use the remote controller to control the aircraft’s orientation during the
landing process.
The Battery Level Indicator is displayed in the DJI Pilot app, and is described below
Battery level indicator
Critical Low battery level
warning(Red)
Low battery
level warning
Sufcient battery
level(Green)
Remaining ight time
Power requires
to return home
©
2015 DJI. All Rights Reserved.
15
Aircraft
INSPIRE 1
User Manual
Aircraft automatically descends and lands if RTH is triggered when the aircraft ies within a 20
meter (65 feet) radius of the Home Point.
Aircraft cannot avoid obstruction during the Failsafe RTH, therefore it is important to set an
reasonable Failsafe altitude before each ight. Launch the DJI Pilot app and enter “Camera”
view and select “MODE” to set the Failsafe altitude.
Aircraft will stop ascending and immediately return to the Home Point if you move the throttle
stick if the aircraft reaches 20 m altitudes or beyond during Failsafe.
When the critical battery level warning activates and the aircraft is descending to land
automatically, you may push the throttle upward to hover the aircraft and navigate it to a more
appropriate location for landing.
Color zones and markers on the battery level indicator reect estimated remaining ight time
and are adjusted automatically, according to the aircraft’s current status.
Failsafe RTH
Failsafe RTH is activated automatically if remote controller signal (including video relay signal) is lost for
more than 3 seconds provided that Home Point has been successfully recorded and compass is working
normally. Return home process may be interrupted and the operator can regain control over the aircraft if
a remote controller signal is resumed.
Failsafe Illustration
GPS
Dynamic Home Point
Dynamic home point is useful in situations when you are in
motion and require a Home Point that is different from the
takeoff point. GPS module is located at the position shown in
the gure below:
Ensure the space above the GPS module is not
obstructed when using Dynamic Home Point.
5 Go Home(20m can be set)
Fast Blinking Yellow
1 Record Home Point (HP)
Blinking Green
3 Remote Controller Signal Lost
Fast Blinking Yellow
2 Conrm Home Point
Blinking Green
6 Landing after Hovering 15secs
Fast Blinking Yellow
4
Signal Lost Lasts 3secs.
Fast Blinking Yellow
Height over HP>20m
Elevate to 20m
Height over HP<=20m
20m
16
©
2015 DJI. All Rights Reserved.
Aircraft
INSPIRE 1
User Manual
There are two options for Dynamic Home Point.
1. Set the aircraft current coordinate as the new Home Point.
2. Set the remote controller’s coordinate as the new Home Point.
Setting Up Dynamic Home Point
Follow the steps below to setup Dynamic Home Point:
1. Connect to the mobile device and launch the DJI Pilot app and go to the “Camera” page.
2. Tap“
”and select“ ”, to reset the remote controller’s coordinates as the new Home Point.
3. Tap“
”and select“ ”, to reset the
aircraft
’s coordinates as the new Home Point.
4. The aircraft status indicator blinks green to show Home Point is set successfully.
Vision Positioning System
DJI Vision Positioning is a positioning system that uses ultrasonic and image data to help the aircraft
identify its current position. With the help of Vision Positioning, your Inspire 1 can hover in place more
precisely and fly indoors or in other environments where there is no GPS signal available. The main
components of DJI Vision Positioning are located on the bottom of your Inspire 1, including [1]two sonar
sensors and[2]one monocular camera.
Using Vision Positioning
Vision Positioning is activated automatically when the Inspire 1 is powered on. No manual action is
required. Vision Positioning is typically used in the indoor environment where no GPS is available. By
using the sensors on the Vision Positioning system, Inspire 1 can perform precision hovering even when
no GPS is available.
[1]
[2]
©
2015 DJI. All Rights Reserved.
17
Aircraft
INSPIRE 1
User Manual
Follow the steps below to use Vision Positioning:
1. Toggle the switch to “P” as shown the gure to the right:
2. Place the Inspire 1 on a at surface. Notice that the Vision Positioning system
cannot work properly on surfaces without pattern variations.
3. Power on the Inspire 1. The aircraft status indicator will ash twice in green light,
which indicates the Vision Positioning system is ready. Gently push the throttle up
to lift off, and the Inspire 1 will hover in place.
The performance of your Inspire 1’s Vision Positioning System is subject to the surface you are
ying over. The ultrasonic waves may not be able to accurately measure the distance over sound
absorbing materials, and the camera may not function correctly in suboptimal environments. The
aircraft will switch from “P” mode to “A” mode automatically if both GPS and Vision Positioning
System are not available. So operate the aircraft cautiously when in any of the following situations:
Flying over monochrome surfaces (e.g. pure black, pure white, pure red, pure green).
Flying over a highly reective surfaces.
Flying at high speeds(over 8m/s at 2 meters or over 4m/s at 1 meter).
Flying over water or transparent surfaces.
Flying over moving surfaces or objects.
Flying in an area where the lighting changes frequently or drastically.
Flying over extremely dark (lux < 10) or bright (lux > 10,000) surfaces.
Flying over surfaces that can absorb sound waves (e.g. thick carpet).
Flying over surfaces without clear patterns or texture.
Flying over surfaces with identical repeating patterns or textures (e.g. tiles with same design).
Flying over inclined surfaces that will deect sound waves away from the aircraft.
In the event of loss of remote controller’s signal, the aircraft will hover for 8 seconds and then
auto-land if it is in “P” mode.
Keep the sensors clean at all times. Dirt or other debris may adversely affect the effectiveness
of the sensors.
The effective hovering altitudes of the aircraft is from 0 to 2.5 meters.
Vision Positioning system may not function properly when the aircraft is ying over water.
Vision Positioning system may not be able to recognize pattern on the ground in low light
conditions (less than 100lux).
Do not use other ultrasonic devices with frequency of 40 KHz when Vision Positioning system is
in operation.
Vision Positioning system may not be able to stabilize the aircraft when flying close to the
ground (below 0.5 meters) in fast speed.
Keep the animals away from the aircraft when Vision Positioning system is activated. The sonar
sensor emits high frequency sound that is only audible to some animals.
Flight Recorder
Flight data is automatically stored in the internal storage device of the aircraft. User can gain access to
these data through the DJI Pilot app. This includes ight duration, orientation, distance, aircraft status
information, speed, and other parameters.
Attaching and Detaching the Propellers
Use only DJI approved propellers with your Inspire 1. The grey or black nut on the propeller indicates
the rotation direction of the propeller and where it should be attached. To attach the propellers properly,
18
©
2015 DJI. All Rights Reserved.
Aircraft
INSPIRE 1
User Manual
Ensure propellers are attached to its corresponding motors, otherwise the aircraft cannot take off.
Handling the propellers with care.
Manually tighten each of the propellers on the corresponding motors to ensure it is attached rmly.
Detaching the Propellers
Hold the motor still. Then spin the propeller in the unlock direction indicated on the propeller itself.
Detaching1345sQuick-ReleasePropellers
Press the 1345s Quick-Release propellers downward firmly then rotate the propeller in the unlock
direction to unlock the propellers.
Check that the propellers and motors are installed correctly and rmly before every ight.
Ensure that all propellers are in good condition before each ight. DO NOT use old, chipped,
or broken propellers.
To avoid injury, STAND CLEAR of and DO NOT touch propellers or motors when they are spinning.
ONLY use original DJI propellers for a better and safer ight experience.
DJI Intelligent Flight Battery
The DJI Intelligent Flight Battery has a capacity of 4500mAh, voltage of 22.2V, and smart charge-
discharge functionality. It can only be charged with an appropriate DJI approved charger.
Intelligent Flight Battery
Charger
match the nut with the dots on the motors of your Inspire 1:
Propellers Greycap(1345) Blackcap(1345R)
Figure
Attach On Motors without a black dot Motors with a black dot
Legends
Lock : Turn the propellers in the indicated direction to mount and tighten
Unlock : Turn the propellers in the indicated direction to loosen and remove
Attaching the Propellers
1. Attach the propellers with a grey nut onto a motor without a black dot and spin the propellers clockwise
to secure them in place. Attach the propellers with a black nut onto a motor with a black dot and spin
the propellers counter clockwise to secure its position. Be sure to completely tighten each propeller by
hand before ight.
©
2015 DJI. All Rights Reserved.
19
Aircraft
INSPIRE 1
User Manual
DJI Intelligent Flight Battery Functions
1. Battery Level Display: LEDs display the current battery level.
2. Battery Life Display: LEDs display the current battery power cycle.
3. Auto-discharging Function: The battery automatically discharges to below 65% of total power when it
is idle (press the power button to check battery level will cause battery to exit idle state) for more than
10 days to prevent swelling. It takes around 2 days to discharge the battery to 65%.It is normal to feel
moderate heat emitting from the battery during the discharge process. Discharge thresholds can be
set in the DJI Pilot app.
4. Balanced Charging: Automatically balances the voltage of each battery cell when charging.
5. Over charge Protection: Charging automatically stops when the battery is fully charged.
6. Temperature Detection: The battery will only charge when the temperature is between 0 °C(32°F) and
40°C (104°F).
7. Over Current Protection: Battery stops charging when high amperage (more than 10A) is detected.
8. Over Discharge Protection: Discharging automatically stops when the battery voltage reaches 18V to
prevent over-discharge damage
9. Short Circuit Protection: Automatically cuts the power supply when a short circuit is detected.
10. Battery Cell Damages Protection: DJI Pilot app shows warning message when damaged battery cell
is detected.
11. Battery Information History: Show the last 32 entries of battery information records that include warning
messages and so on.
12. Sleep Mode: Sleep mode is entered after 10 minutes of inactivity to save power.
13. Communication: Battery voltage, capacity, current, and other relevant information is provided to the
aircraft’s to the main controller.
Refer to
Disclaimer
and
Intelligent Flight Battery Safety Guidelins
before use. Users take full
responsibility for all operations and usage.
Battery must be fully charged before using it for the rst time. Refer to "Charging the Intelligent
Flight Battery" P21 for more information .
Using the Battery
Powering ON/OFF
Powering On: Press the Power Button once, then press again and hold for 2 seconds to power on. The
Power LED will turn red and the Battery Level Indicators will display the current battery level.
Powering Off: Press the Power Button once, then press again and hold for 2 seconds to power off.
LED1
LED2
LED3
LED4
Power Button
(Built-in LED)
20
©
2015 DJI. All Rights Reserved.
Aircraft
INSPIRE 1
User Manual
Low Temperature Notice:
1. The performance of the intelligent Flight Battery is significantly reduced when flying in a low
temperature environments (those with air temperatures below 5℃). Ensure that the battery is fully
charged and the cell voltage is at 4.35 V before each ight.
2. Using the Intelligent Flight Battery in extremely low temperature environments (those with air
temperatures below -10℃) is not recommended. When flying in environments with temperatures
between 5℃ and -10℃, the Intelligent Flight Battery should be able to achieve the appropriate voltage
levels (above 4.2 V), but it is recommended that you apply the included insulation sticker to the battery
in order to prevent a rapid drop in temperatures.
3. If the DJI Pilot app displays the “Critical Low Battery Level Warning” when ying in low temperature
environments, stop ying and land the aircraft immediately. You will still be able to control the aircraft’s
movement when this warning is triggered.
4. Store the Intelligent Flight Battery in a room temperature environment and ensure that its temperature
exceeds 5℃ before using it in the low temperature environment.
5. When using the Inspire 1 in a low temperature environment, begin by allowing the aircraft to hover at a
low altitude, for approximately one minute, to heat the battery.
6. To ensure optimum performance, keep the Intelligent Flight Battery’s core temperature above 20℃
when in use.
In cold environments, insert the battery into the battery compartment and allow the aircraft to
warm up for approximately 1-2 minutes before taking off.
Checking the battery level
The Battery Level Indicators display how much remaining power the battery has. When the battery is
powered off, press the Power Button once. The Battery Level Indicators will light up to display the current
battery level. See below for details.
The Battery Level Indicators will also show the current battery level during charging and
discharging. The indicators are dened below.
: LED is on.
: LED is ashing.
: LED is off.
Battery Level
LED1 LED2 LED3 LED4 Battery Level
87.5%~100%
75%~87.5%
62.5%~75%
50%~62.5%
37.5%~50%
25%~37.5%
12.5%~25%
0%~12.5%
=0%
©
2015 DJI. All Rights Reserved.
21
Aircraft
INSPIRE 1
User Manual
Battery Life
LED1 LED2 LED3 LED4 Battery Life
90%~100%
80%~90%
70%~80%
60%~70%
50%~60%
40%~50%
30%~40%
20%~30%
below 20%
When battery life reaches 0%, it can no longer be used.
For more information about the battery, launch DJI Pilot app and check the information under the
battery tab.
Charging the Intelligent Flight Battery
1. Connect Battery Charger to a power source (100-240V 50/60Hz).
2. Open the Protection Cap and connect the Intelligent Flight Battery to the Battery Charger. If the battery
level is above 95%, turn on the battery before charging.
3. The Battery Level Indicator will display the current battery level during charging.
4. The Intelligent Flight Battery is fully charged when Battery Level Indicators are all off.
5. Air cool the Intelligent Flight Battery after each ight. Allow its temperature to drop to room temperature
before storing it for an extended period.
Do not charge the Intelligent Flight Battery and remote controller with standard charger (model:
A14-100P1A) at the same time, otherwise the charger may overheat.
Always turn off the battery before inserting it or removing it from the Inspire 1. Never insert or
remove a battery when it is powered on.
Charger
Intelligent Flight Battery
Power Outlet
Battery life
The battery life indicates how many more times the battery can be discharged and recharged before
it must be replaced. When the battery is powered off, press and hold the Power Button for 5 seconds
to check the battery life. The Battery Level Indicators will light up and/or blink as described below for 2
seconds:
22
©
2015 DJI. All Rights Reserved.
Aircraft
INSPIRE 1
User Manual
Battery Level Indicators while Charging
LED1 LED2 LED3 LED4 Battery Level
0%~25%
25%~50%
50%~75%
75%~100%
Fully Charged
Charging Protection LED Display
The table below shows battery protection mechanisms and corresponding LED patterns.
Battery Level Indicators while Charging
LED1 LED2 LED3 LED4 Blinking Pattern Battery Protection Item
LED2 blinks twice per second Over current detected
LED2 blinks three times per second Short circuit detected
LED3 blinks twice per second Over charge detected
LED3 blinks three times per second Over-voltage charger detected
LED4 blinks twice per second
Charging temperature is too low
(<0°C)
LED4 blinks three times per second
Charging temperature is too high
(>40°C)
After any of the above mentioned protection issues are resolved, press the button to turn off the Battery
Level Indicator. Unplug the Intelligent Flight Battery from the charger and plug it back in to resume
charging. Note that you do not need to unplug and plug the charger in the event of a room temperature
error, the charger will resume charging when the temperature falls within the normal range.
DJI does not take any responsibility for damage caused by third-party chargers.
How to discharge your Intelligent Flight Battery:
To effectively calibrate the battery capacity, it is recommended to charge and discharge the
battery thoroughly for every 10 charge-and-discharge cycle. User should install the battery onto
the aircraft and then power on the aircraft to initiate the discharge process, discharge the battery
until the aircraft is powered off automatically. User should then fully charge the battery to ensure
the battery is working at its optimal.
Slow: Place the Intelligent Flight Battery into the Inspire 1’s Battery Compartment and power it
on. Leave it on until there is less than 5% of power left, or until the battery can no longer
be turned on. Launch the DJI Pilot app to check battery level.
Rapid: Fly the Inspire 1 outdoors until there is less than 5% of power left, or until the battery can
no longer be turned on.
©
2015 DJI. All Rights Reserved.
23
Remote Controllers
This chapter describes the features
of the remote controller that includes
aircraft and remote controller operations
and dual remote controller mode.
24
©
2015 DJI. All Rights Reserved.
Remote Controllers
Remote Controller
RemoteControllerProle
The Inspire 1 Remote Controller is a multi-function wireless communication device that integrates the
video downlink ground system and aircraft Remote Controller system. The video downlink and aircraft
Remote Controller system operate at 2.4 GHz with maximum transmission distance of 2km. The remote
controller features a number of camera functions, such as taking and previewing photos and video, and
controlling gimbal motions. The remote controller is powered by a 2S rechargeable battery. The current
battery level is displayed by LEDs on the front panel of the remote control.
Compliance Version: The Remote Controller is compliant with both CE and FCC regulations.
Operating Mode: Control can be set to Mode 1 , Mode 2.
Mode 1: The right stick serves as the throttle.
Mode 2: The left stick serves as the throttle.
Do not operate more than 3 aircrafts within in the same area (size equivalent to a soccer eld) to
prevent transmission interference.
Remote Controller Operations
Powering On And Off The Remote Controller
The Inspire 1 remote controller is powered by a 2S rechargeable battery with a capacity of 6000mAh. The
battery level is indicated by the Battery Level LEDs on the front panel. Follow the steps below to power on
your remote controller:
1. When powered off, press the Power Button once and the Battery Level LEDs will display the current
battery level.
2. Then, press and hold the Power Button to power on the remote controller.
3. The Remote Controller will beep when it powers on. The Status LED will blink green (slave remote
controller blinks solid purple) rapidly, indicating that the remote controller is linking to the aircraft. The
Status LED will show a solid green light when linking is completed.
4. Repeat step 2 to power off the remote controller after nish using it.
Charging Remote Controller
Charge the remote controller via supplied charger.
©
2015 DJI. All Rights Reserved.
25
Remote Controllers
INSPIRE 1
User Manual
Charger
Power Outlet
Power Button
Controlling Camera
Shoot videos or images and adjust camera settings via the Shutter Button, Camera Settings Dial, Playback
Button and Video Recording Button on the remote control.
[1]
[2]
[3]
[4]
[1] Camera Settings Dial
Turn the dial to quickly adjust camera settings such as ISO and shutter speed without letting go of the
remote controller. Move the dial button to left or right to view the pictures or videos in playback mode.
[2] Playback Button
Press to view images or videos that have already been captured.
[3] Shutter Button
Press to take a photo. If burst mode is activated, multiple photos will be taken with a single press.
[4] RecodingButton
Press once to start recording video, then press again to stop recording.
Controlling Aircraft
This section explains how to use the various features of the remote controller. The Remote Controller is set
to Mode 2 by default.
26
©
2015 DJI. All Rights Reserved.
Remote Controllers
INSPIRE 1
User Manual
Remote
Controller
(Mode 2)
Aircraft
(
indicates nose direction)
Remarks
Moving the left stick up and down changes the
aircraft’s elevation.
Push the stick up to ascend and down to descend.
Push the throttle stick up to takeoff.
When both sticks are centered, the Inspire 1 will
hover in place.
The more the stick is pushed away from the
center position, the faster the Inspire 1 will change
elevation. Always push the stick gently to prevent
sudden and unexpected elevation changes.
Moving the left stick to the left or right controls the
rudder and rotation of the aircraft.
Push the sick left to rotate the aircraft counter
clock-wise, and push the stick right to rotate the
aircraft clockwise. If the stick is centered, the
Inspire 1 will stay facing its current direction.
The more the stick is pushed away from the center
position, the faster the Inspire 1 will rotate.
Moving the right stick up and down changes the
aircraft’s forward and backward pitch.
Push the stick up to y forward and down to y
backward. The Inspire 1 will hover in place if the stick
is centered.
Push the stick further away from the center position for
a larger pitch angle (maximum 35˚) and faster ight.
Moving the right stick control left and right changes
the aircraft’s left and right pitch.
Push left to y left and right to y right. The Inspire 1
will hover in place if the stick is centered.
Push the stick further away from the center position for
a larger pitch angle (maximum 35˚) and faster ight.
Gimbal Dial: Turn the dial to the right, and the
camera will shift to point upwards. Turn the
dial to the left, and the camera will shift to point
downwards. The camera will remain in its current
position when dial is static.
Stick Neutral/ mid point: Control sticks of the Remote Controller are placed at the central position.
Move the Stick: The control stick is pushed away from the central position.
©
2015 DJI. All Rights Reserved.
27
Remote Controllers
INSPIRE 1
User Manual
Figure Flight Mode
F
F mode
A
A mode
P
P mode
Flight Mode Switch
Toggle the switch to select the desired flight mode.
You may choose between; P mode, F mode and A
mode.
F
A
P
P mode (Positioning) : P mode works best when GPS signal is strong. There are three different states of P
mode, which will be automatically selected by the Inspire 1 depending on GPS signal strength and Vision
Positioning sensors:
P-GPS: GPS and Vision Positioning both are available, and the aircraft is using GPS for positioning.
P-OPTI: Vision Positioning is available but the GPS signal is not. Aircraft is using only Vision
Positioning for hovering
P-ATTI: Neither GPS or Vision Positioning available, aircraft is using only its barometer for positioning,
so only altitude is controlled.
A mode (Attitude): The GPS and Vision Positioning System is not used for holding position. The aircraft
only uses its barometer to maintain altitude. If it is still receiving a GPS signal, the aircraft can automatically
return home if the Remote Controller signal is lost and if the Home Point has been recorded successfully.
F mode (Function): Intelligent Orientation Control (IOC) is activated in this mode. For more information
about IOC, refer to the IOC in Appendix.
The Flight Mode Switch is locked in P mode by default. To unlock the switch, launch the DJI Pilot app,
enter the "Camera" page, tap "MODE", and then activate "Multiple Flight Mode" .
Transformation Switch / RTH Button
The Transformation Switch / RTH Button combination serves two functions. Toggle the switch up or down
to raise or lower the landing gear. Or, press the button to activate the Return to Home (RTH) procedure.
Transformation Switch
This switch has two positions. The effect of toggling the switch to any of these positions is dened below:
1. Raise: Raise the landing gear to its upper most position.
Lower Raise
28
©
2015 DJI. All Rights Reserved.
Remote Controllers
INSPIRE 1
User Manual
2. Lower: The landing gear will lower to its lowest position for landing.
Connecting Mobile Device
Tilt the Mobile Device Holder to the desired position. Press the button on the side of the Mobile Device Holder
to release the clamp, and then place your mobile device into the clamp. Adjust the clamp to secure your
mobile device. Then connect your mobile device to the remote controller with a USB cable. Plug one end of
the cable into your mobile device, and the other end into the USB port on the back of the remote controller.
Do not raise the landing gear when the aircraft is on the ground. Ensure the landing gear is
lowered before landing.
RTH button
Press and hold this button to start the Return to Home (RTH) procedure. The LED around the RTH Button
will blink white to indicate the aircraft is entering RTH mode. The aircraft will then return to the last recorded
Home Point. Press this button again to cancel the RTH procedure and regain the control of the aircraft.
©
2015 DJI. All Rights Reserved.
29
Remote Controllers
INSPIRE 1
User Manual
Optimal Transmission Range
The signal transmission between aircraft and remote controller perform best within the range that
displayed in the picture shown below:
Ensure the aircraft is flying within the optimal transmission range. Adjust the distance and position
between the operator and the aircraft to achieve optimal transmission performance.
Dual Remote Controllers Mode
More than one remote controller can connect to the same aircraft in Dual Remote Controller mode. In
Dual Controllers mode, the “Master” remote controller operator controls the orientation of the aircraft, while
the “Slave” remote controller controls the movement of the gimbal and camera operation. When multiple
“slave” remote controllers (max of 6) are connect to the aircraft, only the rst connected “slave” remote
controller is able to control the gimbal, the remaining “slave” remote controller can view the live feed video
from the aircraft and set the camera parameters, but they cannot control the gimbal.
Optimal Transmission Range
Master Remote
Controller
Slave Remote
Controller
Strong Weak
30
©
2015 DJI. All Rights Reserved.
Remote Controllers
INSPIRE 1
User Manual
Use the gimbal dial on the remote controller to control the pitch movement of the camera in the
single remote controller mode, however, you cannot control the pan movement of the camera.
Setting Up Dual Remote Controllers Mode
Dual Remote Controllers mode is disabled by default. Users must enable this feature on the “Master”
remote controller by through the DJI Pilot app. Follow the steps below for setup:
“Master” Remote Controller:
1. Connect the remote controller to your mobile device and launch the DJI Pilot app.
2. Go to the Camera page, and tap
to enter the remote controller settings window.
3. Tap “Set RC Status” to enable Master-and-Slave mode.
4. Select “Master” in the “Set RC Status” section to set the remote controller as “Master” remote controller.
RC Control Settings
Set RC Status
Slave RC List
Master and Slave
RC Settings
MasterOFF
RC Name Connection Password
T12254 1234
Slave
“Slave” Remote Controller:
1. Tap “Search for Master Controller” to search the “Master” remote controller.
MasterOFF
Slave
RC Control Setting
Set RC Status
RC Name
Search for Master Controller
Request Control
Master RC List
Master and Slave
RC Settings
S88642
5. Enter the connection password for the “Slave” remote controller.
©
2015 DJI. All Rights Reserved.
31
Remote Controllers
INSPIRE 1
User Manual
Remote controller cannot link to the aircraft if the remote controller is set as “Slave”. Meanwhile,
the “Slave” remote controller cannot control the orientation of the aircraft. Reset the remote
controller to “Master” in DJI Pilot app if you wish to link the remote controller to the aircraft.
2. Search the “Master” remote controller in the surrounding area in the “Request Control” section.
3. Select the “Master” remote controller from the “Master RC List” and input the connection password to
connect to the desired “Master” remote controller.
MasterOFF
Slave
RC Control Settings
Set RC Status
RC Name
Search for Master Controller
Request Control
Master RC List
Master and Slave
S88642
T12254
RC Settings
MasterOFF
Slave
RC Control Settings
Set RC Status
RC Name
Search for Master Controller
Request Control
Master RC List
Master and Slave
S88642
T12254
RC Settings
Master RC List
RTH LED
Status LED
Remote Controller Status LED
The Status LED reects connection status between Remote Controller and aircraft. The RTH LED shows
the Return to Home status of the aircraft. The table below contains details on these indicators.
32
©
2015 DJI. All Rights Reserved.
Remote Controllers
INSPIRE 1
User Manual
Status LED Alarm Remote Controller Status
Solid Red chime
The remote controller set as "Master" but it is not
connected with the aircraft.
Solid Green chime
The remote controller set as "Master" and it is connected
with the aircraft.
Solid Purple D-D-
The remote controller set as "Slave" but it is not
connected with the aircraft.
Solid Blue D-D- chime
The remote controller set as "Slave" and it is connected
with the aircraft.
Slow Blinking Red D-D-D
......
Remote controller error.
/
Red and Green/ Red and
Yellow Alternate Blinks
None HD Downlink is disrupted.
RTH LED Sound Remote Controller Status.
Solid White chime Aircraft is returning home.
Blinking White D
. . .
Sending Return to Home command to the aircraft.
Blinking White DD
.. .. ..
Aircraft Return to Home in progress.
The Remote Status Indicator will blink red, sound an alert, when the battery level is critically low.
Linking the Remote Controller
The remote controller is linked to your aircraft before delivery. Linking is only required when using a new
remote controller for the rst time. Follow these steps to link a new remote controller:
1. Power on the remote controller and connect to the mobile device. Launch DJI Pilot app.
2. Power on the Intelligent Flight Battery.
3. Enter “Camera” view and tap on and then tap “Linking Remote Controller” button as shown below.
RC Control Setting
Remote Control Calibration
Stick Mode
Gimbal Pitch/YawC1 C2 Reset gimbal yaw
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back
of the remote controller.
Linking Remote Controller
©
2015 DJI. All Rights Reserved.
33
Remote Controllers
INSPIRE 1
User Manual
RC Control Setting
Remote Control Calibration
Stick Mode
Gimbal Pitch/YawC1 C2 Reset gimbal yaw
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back
of the remote controller.
Linking Remote Controller
C2
Searching for aircraft frequency,
timeout in 54 seconds
Cancel
Press the linking button on the aircraft
to link this remote controller
Remote controller cannot link to the aircraft if the remote controller is set as “Slave”. Meanwhile,
the “Slave” remote controller cannot control the orientation of the aircraft. Reset the remote
controller to “Master” in DJI Pilot app if you wish to link the remote controller to the aircraft.
Remote controller will disconnect from the linked aircraft if a new remote controller is linked to
the same aircraft.
Remote Controller Compliance Version
The remote controller is compliant with both CE and FCC requirements.
5. Locate the Linking button on the front of the aircraft, as shown in the gure shown below. Press the
Linking button to start linking. The Remote Controller Status Indicator will display solid green if Link is
succeed.
4. The remote controller is ready to link. The Remote Controller Status Indicator blinks blue and "beep"
sound is emitted.
34
©
2015 DJI. All Rights Reserved.
Gimbal and Camera
This chapter provides the technical
specications of the camera and explains
the working mode of the gimbal.
©
2015 DJI. All Rights Reserved.
35
Gimbal and Camera
Camera and Gimbal
CameraProle
The on-board camera supports 4K video capture up to 4096x2160p24 and 12M pixel photos capture by
using the 1/2.3 inch CMOS sensor. You may export the video in either MOV or MP4 format for editing.
Available picture shooting modes include burst, continuous, and timer mode. A live preview of what the
camera is seeing before you shoot videos and pictures is supported through the DJI Pilot App.
Camera Micro-SD Card Slot
To store your photos and videos, plug in the micro-SD card into the slot shown below before powering on
the Inspire 1. The Inspire 1 comes with a 16GB micro-SD card and supports up to a 64GB micro-SD card.
A UHS-1 type micro-SD card is recommended, because the fast read and write capability of these cards
enables you to store high-resolution video data.
Do not remove micro-SD card from the Inspire 1 when it is powered on.
Camera Data Port
Power on the Inspire 1 and then connect a USB cable to the Camera Data Port to download photos or
videos from the camera to your computer.
Power on the aircraft before attempting to download the les.
36
©
2015 DJI. All Rights Reserved.
Gimbal and Camera
INSPIRE 1
User Manual
Camera Operation
Use the Shutter and Record button on the remote controller to shoot the images or the videos through the
DJI Pilot app. For more information about how to use these buttons, refer to “Controlling Camera” P25.
ND Filter
Attach an ND lter to the front of the camera to reduce over-exposure and “jello” effect.
Gimbal
GimbalProle
The 3-axis Gimbal provides a steady platform for the attached camera, allowing you to capture stabilized
images and video. The Gimbal can tilt the camera up to 120 degrees and rotate 360 degrees.
-330°
+
330°
+
30°
-90°
Use the gimbal dial on the remote controller to control pitch movement of the camera by default. Note that
you cannot control the pan motion of the camera by default. Enable the “Master-and-Slave” mode and
set the remote controller to “Slave” state if you wish to control both the pan and pitch movement of the
camera.
Use the gimbal dial on the remote controller to control the pitch movement of the camera in the
single remote controller mode, however, you cannot control the pan movement of the camera.
Pan Control
Follow the instructions below to use the gimbal dial to control the pan movement of the gimbal:
1. Power on the aircraft and remote control, launch DJI Pilot app and enter “Camera” page.
2. Tap “RC Control Settings” icon and select either C1 or C2 customizable button as the gimbal pitch/
yaw switching button.
3. Select “Gimbal Pitch/Yaw” from the dropdown list.
©
2015 DJI. All Rights Reserved.
37
Gimbal and Camera
INSPIRE 1
User Manual
Press C1 or C2 button to switch from pitch mode to yaw mode. You may use the gimbal dial to pan the
gimbal under yaw mode. Press C1 or C2 again to exit yaw mode.
Using DJI Pilot App to Control Gimbal
Follow the steps below to use DJI Pilot app to control the gimbal orientation:
1. Launch DJI Pilot app, enter “Camera” page.
2. Tap and press on the screen until a blue circle is shown.
3. Slide to control the gimbal orientation within the “Camera” page as shown below.
RC Control Setting
Remote Control Calibration
Stick Mode
Gimbal Pitch/YawC1 C2 Reset gimbal yaw
Default stick mode is Mode 2, changing stick modes alters the way the aircraft is controlled.
Do not change unless familiar with your new mode.
You can customize the C1 and C2 buttons on the back
of the remote controller.
Linking Remote Controller
Safe to Fly (GPS)
MODE
CL
P-GPS
H:
39M
D:
1039M
V.S:
8.3M/S
H.S:
24.2M/S
1.2M
1/320
4821
JPEG
ISO 100
EV 0
38
©
2015 DJI. All Rights Reserved.
Gimbal and Camera
INSPIRE 1
User Manual
Follow Mode
The angle between Gimbal’s orientation and aircraft’s nose remains
constant at all times. One user alone can control the pitch motion of the
Gimbal, but a second user is required to control the pan motion using a
second remote controller.
FPV Mode
The Gimbal will lock to the movements of the aircraft to provide a First-
Person-View ying experience.
Free Mode
The Gimbal’s motion is independent of the aircraft’s orientation. One user
alone can control the pitch motion of the Gimbal, but a second user is
required to control the pan motion using a second remote controller.
Re-alignment
Tap to force the Gimbal orientation to re-align with aircraft’s orientation
by panning from gimbal’s current orientation. Pitch angle will remain
unchanged during the re-alignment.
Gimbal motor error may occur in these situations: (1) Gimbal is placed on uneven ground. (2)
Gimbal has received an excessive external force, e.g. a collision. Please take off from at, open
ground and protect the gimbal after powering up.
Flying in heavy fog or cloud may make the gimbal wet, leading to a temporary failure. The
gimbal will recover when it dries out.
Pitch Pan
Gimbal Operation Modes
Three Gimbal operation modes are available. Switch between the different operation modes on the
Camera page of the DJI Pilot App. Note that your mobile device must be connected to the remote
controller for changes to take effect. Refer to the table below for details:
©
2015 DJI. All Rights Reserved.
39
DJI Pilot App
This chapter describes the four main
GUI of the DJI Pilot app.
40
©
2015 DJI. All Rights Reserved.
DJI Pilot App
Safe to Fly (GPS)
MODE
CL
P-GPS
H:
39M
D:
1039M
V.S:
8.3M/S
H.S:
24.2M/S
1.2M
1/320
4821
JPEG
ISO 100
EV 0
DJI Pilot App
The DJI Pilot app is a new mobile app designed specically for the Inspire 1. Use this app to control the
gimbal, camera and other features of your ight system. The app also comes with Map, Store a User Center,
for conguring your aircraft and sharing your content with friends. It is recommended that you use a tablet
for the best experience.
United States
Mountain View
CAMERA
STORE DISCOVERY
DIRECTOR
Camera
The Camera page contains a live HD video feed from the Inspire 1’s camera. You can also congure
various camera parameters from the Camera page.
[19]
[18]
[17]
[16]
[15]
[14]
[13]
[11][12]
[10]
[9]
[8][7][6][5][4][3][2][1]
©
2015 DJI. All Rights Reserved.
41
DJI Pilot App
INSPIRE 1
User Manual
[1] Flight Mode
: The text next to this icon indicates the current ight mode.
Tap to congure the MC (Main Controller) Settings. These settings allow you to modify ight limits and
set the gain values.
[2] GPS Signal Strength
: This icon shows the current strength of GPS signals. Green bars indicate adequate GPS
strength.
[3] IOC Settings
CL
: This icon displays the IOC setting when the aircraft has entered F-mode. Tap to view the IOC
settings menu and select the desired IOC setting.
[4] SystemStatus
: This icon indicates the current aircraft system status and GPS signal strength.
[5] Battery Level Indicator
: The battery level indicator provides a dynamic display of the battery level. The colored
zones on the battery level indicator represent the power levels needed to carry out different functions.
[6] Remote Controller Signal
: This icon shows the strength of remote controller’s signal.
[7] HD Video Link Signal Strength
:
This icon shows the strength of the HD video downlink connection between the aircraft and
the remote controller.
[8] Battery Level
: This icon shows the current battery level.
Tap to view the battery information menu, set the various battery warning thresholds, and view the
battery warning history.
[9] General Settings
: Tap this icon to view the General Settings page. From this page, you can set ight parameters,
reset the camera, enable the quick view feature, adjust the gimbal roll value, and toggle the ight
route display.
[10] CameraOperationBar
Shutter and Recording Settings
: Tap to enter various camera value settings, including color space for the recording, resolution
of the videos, image size and so on.
Shutter
: Tap this button to take a single photo. Press and hold this button to select single shot, triple shot
or time-lapsed shooting modes.
42
©
2015 DJI. All Rights Reserved.
DJI Pilot App
INSPIRE 1
User Manual
Record
: Tap once to start recording video, then tap again to stop recording. You can also press the
Video Recording Button on the remote controller, which has the same functionality.
Playback
: Tap to enter the playback page. You can preview photos and videos as soon as they are
captured.
Camera Settings
: Tap to set ISO, shutter and auto exposure values of the camera.
[11] Vision Positioning
: This icon shows the distance between the surface and the Vision Positioning System’s sensors.
[12] Flight Telemetry
H:
39M
D:
1039M
V.S:
8.3M/S
H.S:
24.2M/S
1.2M
The Vision Positioning Status icon is highlighted when the Vision Positioning is in operation.
Flight attitude is indicated by the ight attitude icon.
(1) The red arrow shows which direction the aircraft is facing.
(2) Light blue and dark blue areas indicate pitch.
(3) The angle of the boundary between the light blue and dark blue areas indicates the roll angle.
[13] Map
Display the ight path of the current ight. Tap to switch from the Camera GUI to the Map GUI.
[14] HomePointSettings
: Tap this button to reset the current home point. You may choose to set the aircraft take-off
location, the remote controller’s current position, or the aircraft’s current position as the Home Point.
[15] Return to Home (RTH)
: Initiate RTH home procedure. Tap to have the aircraft return to the latest home point.
[16] Gimbal Operation Mode
Refer to "Gimbal Operation Mode" P38 for more information.
©
2015 DJI. All Rights Reserved.
43
DJI Pilot App
INSPIRE 1
User Manual
[17] Auto Takeoff/Landing
/ : Tap to initiate auto takeoff or landing.
[18] Livestream
: Livestream icon indicates the current video feed is broadcasting live on YouTube. Be sure the
mobile data service is available on the mobile device.
[19] Back
: Tap to return to the main GUI.
Director
Director is an automatic video editor built into the DJI Pilot app. After recording several video clips, simply
tap “Director” from the app’s home screen. You can then select a template and a specied number of
clips, which are automatically combined to create a short lm that can be shared immediately.
Store
Tap “Store” to visit the ofcial DJI Online Store to see the latest information about DJI products and easily
buy new products.
Discovery
Sync pictures and videos to your mobile device, view ight logs, and check your DJI account status in
"Discovery". Use your registered DJI account to login to "Discovery".
44
©
2015 DJI. All Rights Reserved.
Flight
This chapter describes the flight safety
and ight restrictions.
©
2015 DJI. All Rights Reserved.
45
Flight
Flight
Once pre-ight preparation is complete, it is recommended to use the ight simulator to learn how to y
safely. Ensure that all ights are carried out in a suitable location.
Flight Environment Requirements
1. Do not use the aircraft in severe weather conditions. These include wind speed exceeding 10m/s ,
snow, rain and smog.
2. Only y in open areas. Tall buildings and steel structures may affect the accuracy of the on-board
compass and GPS signal.
3. Avoid from obstacles, crowds, high voltage power lines, trees or bodies of water.
4. Minimize electromagnetic interference by not flying in area with high levels of electromagnetism,
including mobile phone base stations or radio transmission towers.
5. Aircraft and battery performance is subject to environment factor such as air density and temperature.
Be very careful when ying 14700 feet (4500 meters) or more above sea level as battery and aircraft
performance may be reduced.
6. The Inspire 1 cannot operate within the polar areas in “P” mode.
Flight Limits and Flight Restriction Area
Flight limits on height and distance can be set. The details of these ight limits are described in the following
section.
All unmanned aerial vehicle (UAV) operators should abide by all regulations from such organizations as
the ICAO (International Civil Aviation Organization), FAA and their own national airspace regulations. For
safety reasons, the ight limits function is enabled by default to help users use this product safely and
legally. The ight limits function includes height limits, distance limits and No Fly Zones.
When operating in P Mode, height, distance limits and No Fly Zones work together to manage ight. In A
mode only height limits work and ights cannot go higher than 120 meters.
Max Height & Radius Limits
Max Height & Radius limit ying height and distance, and the user may change these settings in the
DJI Pilot App. Once complete, your Inspire 1 will y in a restricted cylinder that is determined by these
settings. The tables below show the details of these limits.
Max Height
Max Radius
Home Point
Height of aircraft
when powered on
46
©
2015 DJI. All Rights Reserved.
Flight
INSPIRE 1
User Manual
GPS Signal Weak Blinking Yellow
Flight Limits DJI Pilot App Aircraft Status Indicator
Max Height
Flight height restricted to
120m and under.
Warning: Height limit
reached.
None.
Max Radius No limits
If you y out of the limit, you can still control the Inspire 1, but cannot y it further.
If the Inspire 1 ies out of the max radius in Ready to Fly (non-GPS) mode, it will y back within
range automatically.
No-Fly Zones
All No-Fly Zones are listed on the DJI ofcial website at http://ysafe.dji.com/no-y. No-Fly Zones are
divided into Airports and Restricted Areas. Airports include major airports and ying elds where manned
aircraft operate at low altitudes. Restricted Areas include borders between countries or sensitive sites.
The details of the No-Fly Zones are explained below:
Airport:
(1) Airport No-Fly Zones are comprised of Takeoff Restricted Zones and Restricted-Altitude Zones. Each
zone features circles of various size.
(2) R1 depends on the size and shape of the airport, and is an area around the airport that is a Takeoff
Restricted Zone, inside of which take-off and ight is prevented.
(3) From R1 to R1+1 mile around the airport, the ight altitude is limited on a 15 degree incline, starting at
65 feet (20 meters) from the edge of airport and radiating outward. The ight altitude is limited to 1640
feet (500 meters) at R1+1 mile.
(4) When the aircraft is within 320 feet (100 meters) of the No-Fly Zones, a warning message will appear
in the DJI Pilot app.
GPS Signal Strong Blinking Green
Flight Limits DJI Pilot App Aircraft Status Indicator
Max Height
Flight altitude must be under
the set height.
Warning: Height
limit reached.
None.
Max Radius
Flight distance must be within
the max radius.
Warning: Distance
limit reached.
Rapid red ashing
when close to the
max radius limit.
©
2015 DJI. All Rights Reserved.
47
Flight
INSPIRE 1
User Manual
Restricted Areas:
(1) Restricted Areas do not have a ight altitude restriction.
(2) R around the designated Restricted Area is a Take-off Restricted area. Aircraft cannot takeoff within
this zone. The value of R varies depending on the denition of the Restricted Area.
(3) A “warning zone” has been set around each Restricted Area. When the aircraft is within 0.6 miles (1
km) of this zone, a warning message will appear in the DJI Pilot app.
Restricted Areas
R1
66 feet
1 mile
320 feet
R2
100m R
Airports
1640
feet
Restricted Areas
R1
66 feet
1 mile
320 feet
R2
100m R
Airports
1640
feet
48
©
2015 DJI. All Rights Reserved.
Flight
INSPIRE 1
User Manual
GPS Signal Strong Blinking Green
Zone Restriction DJI Pilot App Prompt
Aircraft
Status
Indicator
No-y Zone
Motors will not start.
Warning: You are in a No-y
zone. Take off prohibited.
Red ashing
If the aircraft enters the
restricted area in A mode but
P mode activates the aircraft
will automatically descend to
land then stop its motors after
landing.
Warning: You are in a No-y
zone, automatic landing has
begun. (If you are within 1.5 mile
radius)
Restricted-
altitude ight
zone
If the aircraft enters the
restricted area in A mode but P
mode activates, it will descend
to a safe altitude and hover 15
feet below the safe altitude.
Warning: You are in a restricted
zone. Descending to safe
altitude. (If you are between the
range of 1.5 mile and 5 mile
radius)
Warning: You are in a restricted
zone. Max ight height restricted
to between 10.5m and 120m. Fly
Cautiously.
Warning zone
No ight restriction applies, but
there will be warning message.
Warning: You are approaching a
restricted zone, Fly Cautiously.
Free zone
No restrictions. None. None.
Semi-automatic descent: All stick commands are available except the throttle stick command
during the descent and landing process. Motors will stop automatically after landing.
When ying in the safety zone, aircraft status indicator will blink red quickly and continue for 3
seconds, then switch to indicate current ying status and continue for 5 seconds at which point
it will switch back to red blinking.
For safety reasons, please do not y close to airports, highways, railway stations, railway lines,
city centers and other special areas. Try to ensure the aircraft is visible.
©
2015 DJI. All Rights Reserved.
49
Flight
INSPIRE 1
User Manual
PreightChecklist
1. Remote controller, aircraft battery, and mobile device are fully charged.
2. Propellers are mounted correctly and rmly.
3. Micro-SD card has been inserted if necessary.
4. Gimbal is functioning as normal.
5. Motors can start and are functioning as normal.
6. DJI Pilot app connected to the aircraft.
Calibrating the Compass
IMPORTANT: Make sure to calibrate the compass in every new flight location. The compass is very
sensitive to electromagnetic interference, which can cause abnormal compass data leading to poor ight
performance or even failure. Regular calibration is required for optimum performance.
DO NOT calibrate your compass where there is a chance of strong magnetic interference, such
as magnetite, parking structures, and steel reinforcements underground.
DO NOT carry ferromagnetic materials with you during calibration such as keys or cellular
phones.
DO NOT calibrate beside massive metal objects.
Calibration Procedures
Choose an open space to carry out the following procedures.
1. Ensure that the compass is calibrated. If you did not calibrate the compass as part of your pre-ight
preparations, or if you have moved to a new location since the last calibration, tap Aircraft Status
Indicator bar in the app and select “Calibrate”, then follow the on-screen instructions.
2. Hold and rotate the aircraft horizontally 360 degrees, and the Aircraft Status Indicator will display a
solid green light.
50
©
2015 DJI. All Rights Reserved.
Flight
INSPIRE 1
User Manual
3. Hold the aircraft vertically with nose pointing downward, and rotate it 360 degrees around the center
axis. Recalibrate the compass if the Aircraft Status Indicator show solid red.
If the Aircraft Status Indicator blinks red and yellow after the calibration, move your aircraft to a
different location to carry out compass calibration.
Calibrate the compass before each ight. Launch DJI Pilot App, follow the on-screen instruction
to calibrate the compass.
When to Recalibrate
1. When compass data is abnormal, and the Aircraft Status Indicator is blinking red and yellow.
2. When ying in a new location, or a location that is different from your last ight.
3. When the mechanical structure of the Inspire 1 has changed, i.e. changed mounting position of the
compass.
4. When severe drifting occurs in ight, i.e. the Inspire 1 does not y in straight lines.
Auto Take-off and Auto Landing
Auto Take-off
Use auto take-off to take off your aircraft automatically if the Aircraft Status Indicator displays blinking
green. Follow the steps below to use auto take-off:
1. Launch DJI Pilot app, enter “Camera” page.
2. Ensure the aircraft is in “P” mode.
3. Go through the pre-ight checklist.
4. Tap“ ”, and conrm ight condition. Slide to conrm and take-off.
5. Aircraft takes off and hovers at 1.2 meters above ground.
©
2015 DJI. All Rights Reserved.
51
Flight
INSPIRE 1
User Manual
Auto-Landing
Use auto-landing to land your aircraft automatically if the Aircraft Status Indicator displays blinking green.
Follow the steps below to use auto-landing:
1. Ensure the aircraft is in “P” mode.
2. Check the landing area condition before tapping “ ”, to perform landing.
3. Aircraft lowers the landing gear and proceed to land automatically.
Landing gear will automatically raise when the aircraft reaches an altitude of 1.2m for the rst
time, and automatically lower every time it descends to 0.8m. Users can turn this feature ON/OFF
in the Pilot app.
Starting/Stopping the Motors
Starting Motors
The Combination Stick Command (CSC) listed below are used to start the motors instead of simply push-
ing the stick up. Ensure that you perform the CSC in one motion.
Flight Test
Take off/Landing Procedures
1. Place the aircraft on open, at ground with battery indicators facing towards you.
2. Power on the remote controller and your mobile device, then the Intelligent Flight Battery.
3. Launch the DJI Pilot App and enter the Camera page.
4. Wait until the Aircraft Indicator blinks green. This means the Home Point is recorded and it is safe to y
now. If it ashes yellow, it means Home Point is not recorded, and you should not take off.
5. Push the throttle up slowly to take off or using Auto Take-off to take off.
Stopping Motors
There are two methods to stop the motors.
Method 1: When the Inspire 1 has landed, push the throttle down , then conduct CSC . Motors will stop
immediately. Release both sticks once motors stop.
Method 2: When the aircraft has landed, push the throttle down and hold. The motors will stop after 3
seconds.
Do not perform CSC when aircraft is in midair, otherwise the motors will be stopped.
OR
OR
52
©
2015 DJI. All Rights Reserved.
Flight
INSPIRE 1
User Manual
6. Shoot photos and videos using the DJI Pilot app.
7. To land, hover over a level surface and gently pull down on the throttle slowly to descend.
8. After landing, execute the CSC command or hold the throttle at its lowest position for 3 seconds or
more until the motors stop.
9. Turn off the Intelligent Flight Battery rst, followed by the Remote Controller.
When the Aircraft Status Indicator blinks yellow rapidly during ight, the aircraft has entered Failsafe
mode.
A low battery level warning is indicated by the Aircraft Status Indicator blinking red slowly or
rapidly during ight.
Watch video tutorials about ight for more ight information.
Video Suggestions and Tips
1. Work through the checklist before each ight.
2. Select desired gimbal working mode in the DJI Pilot app.
3. Aim to shoot when ying in P mode only.
4. Always y in good weather, such as sunny or windless days.
5. Change camera settings to suit you. These include photo format and exposure compensation.
6. Perform ight tests to establish ight routes and scenes.
7. Push the sticks gently to make aircraft movements stable and smooth.
©
2015 DJI. All Rights Reserved.
53
FAQ
54
©
2015 DJI. All Rights Reserved.
FAQ
Troubleshooting (FAQ)
1. How can I put a GoPro camera on the Inspire 1?
The Inspire 1 does not currently support GoPro attachments. The gimbal is designed to hold DJI
cameras only.
2. When will ground station functionality be available?
The Inspire 1 does not currently support ground station. Ground station will be available with future
rmware updates.
3.Isthecamera’sexposureautomatic?
The exposure can be set to Auto, for automatic changes, or Manual, if you wish to use a specic setting.
4.CanIseethesizeofimagesthroughtheapp?
Yes, you can preview image or video sizes through the DJI Pilot app.
5. How much weight can the Inspire 1 carry without its included camera?
We do not recommend ying with any payload other than the included DJI gimbal and camera.
6. Do you have an LCD monitor available for the Inspire 1?
No, DJI does not sell LCD or HD monitors for the Inspire 1. However, you can output the live streaming
video to a compatible monitor or mobile device of your own.
7. How long does it take to charge the battery? Does it comes with a charger?
Yes, all Inspire 1 units come with standard TB47 charger.
With the standard TB47 100W charger, it takes 85min to fully charge a 4500mAh battery.
8. Are the two remote controllers the same? Should I setup the remote controllers in the app or
somewhere else to control the camera and aircraft separately?
The two remote controllers are physically identical. You can set the remote controllers to either "Master"
or "Slave" through the DJI Pilot app if you wish to use dual controller mode.
9.WherecanIndinfoonthesimulationapplicationthatplugsintothetrainerport?Canyousuggesta
simulation program?
There is no trainer port on the remote controller for the Inspire 1.
10.CanthemobiledeviceholderbeusedonthePhantom2seriesremotecontroller?
No, it cannot. The mobile device holder can only be used with the Inspire 1 remote.
11. Does the Inspire 1 have a SD card included?
The Inspire 1 comes with a 16GB micro-SD card. It supports SD cards up to 64GB.
12. Can I upgrade and buy a second remote controller if I only buy a single remote controller now?
Yes.
13. How big is the Inspire 1?
Its length x height x width dimensions without the propellers attached are 44 x 30 x 45cm (17.3 x 11.8 x 17.7in).
©
2015 DJI. All Rights Reserved.
55
FAQ
INSPIRE 1
User Manual
14.WhatightcontrollerdoestheInspire1use?
The Inspire 1 uses its own new ight controller.
15. Which motors and propellers does the Inspire 1 come with?
The Inspire 1 uses 3510 motors and 1345 propellers.
16. Aircraft frame arm joints appear loosen, is that normal?
The space of the joins shown in the below gure is normal and it will not affect the performance of
aircraft, do not adjust the position of the screws on your own.
17. Failed to complete self-check?
Place the aircraft on the at surface before powering on. Do not move the aircraft during the self-
check.
56
©
2015 DJI. All Rights Reserved.
Appendix
©
2015 DJI. All Rights Reserved.
57
Appendix
Appendix
Specications
Aircraft
Model T600
Weight (Battery Included) 2935 g
Hovering Accuracy (P Mode)
Vertical: 0.5 m
Horizontal: 2.5 m
Max Angular Velocity
Pitch: 300°/s
Yaw: 150°/s
Max Tilt Angle 35°
Max Ascent Speed 5 m/s
Max Descent Speed 4 m/s
Max Speed 22 m/s (ATTI mode, no wind)
Max Flight Altitude 4500 m
Max Wind Speed Resistance 10 m/s
Max Flight Time Approximately 18 minutes
Motor Model DJI 3510
Propeller Model DJI 1345
Indoor Hovering Enabled by default
Operating Temperature Range -10° to 40° C
Diagonal Distance 559 to 581 mm
Dimensions 438x451x301 mm
Gimbal
Model ZENMUSE X3
Output Power (With Camera) Static: 9 W; In Motion: 11 W
Operating Current Station: 750 mA; Motion: 900 mA
Angular Vibration Range ±0.03°
Mounting Detachable
Controllable Range
Pitch: -90° to +30°
Pan: ±320°
Mechanical Range
Pitch: -125° to +45°
Pan: ±330°
Max Controllable Speed
Pitch: 120°/s
Pan: 180°/s
58
©
2015 DJI. All Rights Reserved.
Appendix
INSPIRE 1
User Manual
Camera
Name X3
Model FC350
Total Pixels 12.76M
Effective Pixels 12.4M
Image Max Size 4000x3000
ISO Range 100-3200 (video) 100-1600 (photo)
Electronic Shutter Speed 8 s to 1/8000 s
FOV (Field Of View) 94°
CMOS Sony EXMOR 1/2.3”
Lens
20mm (35mm format equivalent) f/2.8 focus at
)
9 Elements in 9 groups
Anti-distortion
Still Photography Modes
Single shoot
Burst shooting: 3/5/7 frames
Auto Exposure Bracketing (AEB): 3/5 bracketed frames at
0.7EV Bias
Time-lapse
Video Recording Modes
UHD (4K): 4096x2160p24/25, 3840x2160p24/25/30
FHD: 1920x1080p24/25/30/48/50/60
HD: 1280x720p24/25/30/48/50/60
Max Bitrate Of Video Storage 60 Mbps
Supported File Formats
FAT32/exFAT
Photo: JPEG, DNG
Video: MP4/MOV (MPEG-4 AVC/H.264)
Supported SD Card Types
Micro SD
Max capacity: 64 GB. Class 10 or UHS-1 rating required.
Operating Temperature Range 0° to 40° C
Remote Controller
Name C1
Operating Frequency
922.7MHz~927.7 MHz (Japan Only)
5.725~5.825 GHz;2.400~2.483 GHz
Transmitting Distance 2 km (Outdoor And Unobstructed)
EIRP 10dBm@900m, 13dBm@5.8G, 20dBm@2.4G
Video Output Port USB, Mini-HDMI
Power Supply Built-in battery
Charging DJI charger
Dual User Capability Host-and-Slave connection
©
2015 DJI. All Rights Reserved.
59
Appendix
INSPIRE 1
User Manual
Mobile Device Holder Tablet or Smart Phone
Output Power 9 W
Operating Temperature Range -10° to 40° C
Storage Temperature Range
Less than 3 months: -20° to 45° C
More than 3 months: 22° to 28° C
Charging Temperature Range 0-40° C
Battery 6000 mAh LiPo 2S
Charger
Model A14-100P1A
Voltage 26.3 V
Rated Power 100 W
Battery (Standard)
Name Intelligent Flight Battery
Model TB47
Capacity 4500 mAh
Voltage 22.2 V
Battery Type LiPo 6S High voltage battery
Energy 99.9 Wh
Net Weight 570 g
Operating Temperature Range -10° to 40° C
Storage Temperature Range
Less than 3 months: -20° to 45° C
More than 3 months: 22° C to 28° C
Charging Temperature Range 0° to 40° C
Max Charging Power 180 W
Battery (Optional)
Name Intelligent Flight Battery
Model TB48
Capacity 5700 mAh
Voltage 22.8 V
Battery Type LiPo 6S
Energy 129.96 Wh
Net Weight 670 g
Operating Temperature Range -10 to 40° C
Storage Temperature Range
Less than 3 months: -20 to 45° C
More than 3 months: 22° to 28° C
Charging Temperature Range 0° to 40° C
60
©
2015 DJI. All Rights Reserved.
Appendix
INSPIRE 1
User Manual
Max Charging Power 180 W
Vision Positioning
Velocity Range Below 8 m/s (2 m above ground)
Altitude Range 5-500 cm
Operating Environment Brightly lit (lux > 15) patterned surfaces
Operating Range 0-250 cm
DJI Pilot App
Mobile Device System Requirements iOS version 7.1 or later; Android version 4.1.2 or later
Supported Mobile Devices
* iPhone 6 Plus, iPhone 6, iPhone 5S, iPad Air 2, iPad Mini
3, iPad Air, iPad Mini 2, iPad 4;* Samsung Note 3, Samsung
S5, Sony Z3 EXPERIA;* Note: It is recommended that you
use a tablet for the best experience
Intelligent Orientation Control (IOC)
IOC allows users to lock the orientation of aircraft in different fashions. There are three working modes for
IOC and you may select the desired IOC modes from the DJI Pilot app. IOC only works under F mode,
and user must toggle the ight mode switch to “F” mode to activate IOC. Refer to the table below:
Course Lock (CL)
Its forward direction is pointing to the nose direction when recording, which is
xed until you re-record it or exit from CL.
Home Lock (HL)*
Record a Home Point (HP), and push Pitch stick to control the aircraft far from
or near to the HP.
Point of Interest (POI)*
Point of Interest. Record a point of interest (POI), the aircraft can circle around
the POI, and the nose always points to the POI.
*Home Lock and Point of Interest feature are coming soon.
Prerequisites of IOC
Use the IOC feature under the following condition:
Modes IOC GPS enabled GPS Flight Distance Limits
Course Lock No None None
Home Lock Yes
Aircraft
≥10m
Home Point
POI Yes
Aircraft
5m~500m
Point of Interest
Using IOC
Enable the IOC feature by tapping “Enable IOC” in the setting page of the DJI Pilot app. Toggle the Flight
Mode Switch to “F” mode and follow the on-screen instruction to use IOC feature.
©
2015 DJI. All Rights Reserved.
61
Appendix
INSPIRE 1
User Manual
How to Update Firmware
Follow the process described below to upgrade the aircraft, remote controller and battery.
Updating the Aircraft Firmware
Step 1- Check Battery and SD Card Capacity
Ensure the Intelligent Flight Battery has at least 50% power and there is at least 100 MB of free space on
the SD card.
Step 2- Prepare the Firmware Update Package
1. Download the firmware update package from the official DJI website (http://www.dji.com/product/
phantom-3/download).
2. Insert the SD card into your PC. Extract the all downloaded les into the root directory of the SD card.
Remove the SD card from your PC. Ensure the aircraft is powered off then insert the SD card into the
SD card slot on the camera.
Step 3- Update the Aircraft
1. Ensure the remote controller is powered off and then power on the aircraft. Upgrade will begin
automatically after aircraft is powered on.
2. It will take approximately 25 minutes to complete the rmware update. The camera status indicator
will blink green and red to indicate the upgrade is in progress and stop blinking when the update is
complete with success.
3. Check the upgrade status by opening the “.txt” le that is automatically generated after the update.
The update is successful if the text “result: successful” is in the document. Try upgrading the rmware
again if the text “result: failed” is found or the camera status indicator shows solid red.
Updating the Remote Controller Firmware
Ensure the DJI GO app has been updated to v1.2.0 before updating the remote controller. The
System Status bar in Camera View of the DJI GO App will ash several times if a rmware update is
available. Follow these steps to update the rmware via the DJI GO App.
Step 1- Check Battery and SD Card Capacity
1. The remote controller has at least 50% battery level.
2. Your mobile device is able to access the internet.
3. There is at least 30 MB of free space on your mobile device.
Step 2- Download and Update the Firmware
1. Go to the DJI GO App > Camera View > System Status bar > Overall Status. Tap Download the
firmware update package to download and update the firmware. Track the update progress from
progress bar in the DJI GO App. The status LED on the remote controller will blink blue during update
and blink green when update is complete with success.
Firmware update through the DJI GO app will not work with older versions of the remote controller
rmware. If the rmware update fails, follow the instructions below to update the rmware using the
traditional method:
a. Update the latest rmware package les from DJI ofcial web site.
62
©
2015 DJI. All Rights Reserved.
Appendix
INSPIRE 1
User Manual
FCC Compliance
FCC Compliance
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired
operation.
Changes or modications not expressly roved by the party responsible for compliance could void the
user's authority to operate the equipment.
b. Extract all downloaded les into the root directory of an SD card or USB ash drive.
c. Turn off the remote controller, Insert the SD card into a SD card reader or the USB disk onto the
remote controller USB port when remote controller is turned off.
d. Power on the remote controller and wait 60 seconds until the upgrade begins. Do not power off
the remote controller during the update.
e. It will take approximately 10 minutes to complete the rmware update. The camera will sound
a beeping sound and the Status LED on the remote controller shows solid blue to indicate the
update is in progress. The Status LED on remote controller shows solid green and beeping
sound will stop if the upgrade is completed with success.
f . If you do not have a SD card reader, you may insert the SD card into the gimbal and connect the
gimbal with remote controller to upgrade the remote controller.
You will only be able to update the remote controller rmware through the DJI GO app from
this point onwards.
Updating Intelligent Flight Battery Firmware
The Intelligent Flight Battery is upgraded during the aircraft rmware upgrade process. It is recommended
to keep the upgrade package files in your SD card. The upgrade will start automatically after power
cycling the aircraft.
Ensure there is only one rmware package le stored on your SD card.
Only storage devices that are formatted for FAT32 and exFAT le systems are supported for
aircraft and remote controller rmware updates.
Ensure the internet connection of your mobile device is stable when downloading the rmware
update package.
Turn on Airplane Mode on your mobile device before updating the rmware, as any incoming
calls may disrupt the update process.
Do not perform rmware update while the aircraft is still ying in the air. Only carry out rmware
update when the aircraft is landed.
Be sure to update the remote controller’s rmware to the latest version after you upgrade the
aircraft’s rmware.
The remote controller may become unlinked from the aircraft after updating. Re-link the remote
controller and aircraft.
Conrm the update results based on the blinking pattern of camera status indicator or gimbal
sound. It is normal for the aircraft to sound or the LED to blink during the update process.
©
2015 DJI. All Rights Reserved.
63
Appendix
INSPIRE 1
User Manual
Compliance Information
FCC Warning Message
Any Changes or modications not expressly roved by the party responsible for compliance could void the
user’s authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator&
your body. This transmitter must not be co-located or operating in conjunction with any other antenna or
transmitter.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment generates uses and can radiate radio
frequency energy and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
IC RSS warning
This device complies with Industry Canada licence-exempt RSS standard (s). Operation is subject to the
following two conditions: (1) this device may not cause interference, and (2) this device must accept any
interference,including interference that may cause undesired operation of the device.
Le présent areil est conforme aux CNR d'Industrie Canada licables aux areils radio exempts de licence.
L'exploitation est autorisée aux deux conditions suivantes:
(1) l'areil ne doit pas produire de brouillage, et
(2) l'utilisateur de l'areil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
IC Radiation Exposure Statement:
This equipment complies with IC RF radiation exposure limits set forth for an uncontrolled environment.
This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
This equipment should be installed and operated with minimum distance 20cm between the radiator&
your body.
Any Changes or modications not expressly roved by the party responsible for compliance could void the
user’s authority to operate the equipment.
64
©
2015 DJI. All Rights Reserved.
Appendix
INSPIRE 1
User Manual
KCC Warning Message
“해당무선설비는 운용 중 전파혼신 가능성이 있으므로 인명안전과 관련된 서비스는 할 수 없습니다 .”
“해당 무선설비는 운용 중 전파혼신 가능성이 있음”
NCC Warning Message
低功率電波輻射性電機管理辦法
第十二條經型式認證合格之低功率射頻電機,非經許可,公司、商號或使用者均不得擅自變更頻率、加
大功率或變更原設計之特性及功能。
第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信;經發現有干擾現象時,應改善至無
干擾時方得繼續使用。前項合法通信,指依電信法規定作業之無線電通信。低功率射頻電機須忍受合法
通信或工業、科學及醫療用電波輻射性電機設備之干擾。
The content is subject to change.
Download the latest version from
www.dji.com/support
©
2015 DJI. All Rights Reserved.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DJI Inspire 1 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DJI Inspire 1 in de taal/talen: Engels als bijlage per email.

De handleiding is 16,89 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van DJI Inspire 1

DJI Inspire 1 Gebruiksaanwijzing - Deutsch - 64 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info