749188
12
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
12
BOX - IP1529
GB
1. DATI TECNICI
BOX30 BOX40 BOX3SH BOX3EH
Power supply 230 V~ / 50 Hz 230 V~ / 50 Hz 24 V= 24 V=
Absorption 1.3 A 1.2 A 12 A 8 A
Torque 300 Nm 300 Nm 350 Nm 300 Nm
Openingtime 18 s 26 s 15÷30 s 15÷30 s
Service class 3 - FREQUENT 3 - FREQUENT 3 - FREQUENT 3 - FREQUENT
Intermittence S2 = 15 min
S3 = 25%
S2 = 15 min
S3 = 25%
S2 = 30 min
S3 = 50%
S2 = 30 min
S3 = 50%
Temperature -20° C / +55° C -20° C / +55° C -20° C / +55° C -20° C / +55° C
Degreeofprotection IP44
IP40 (with E1BOX)
IP44
IP40 (with E1BOX)
IP44 IP44
IP40 (with E1HBOX)
Control Panel E1BOX E1BOX VIVAH E1HBOX
Applications:
H = door wing height
L = door wing width
1x BOX
2x BOX
2. REFERENCE TO ILLUSTRATIONS
The given operating and performance features can only be gua-
ranteed with the use of DITEC accessories and safety devices.
2.1 Standardinstallationreferences(g.1-2)
[1] Gearmotor
[2] Courtesy light
[3] Casing
[4] Bottom casing
[5] Manual release
[6] Gearmotor shaft
[7] Base plate
[8] Safety edge
[9] Remote control
[10] Control panel
[11] Connect the power supply to a type-approved omnipolar
switch, with a contact opening distance of at least 3mm
(not supplied)
2.2 Accessories
BOXB2D Pair of straight arms
BOXB2C Pair of curved arms
BOXRL Side transmission
BOX2P Pair of extensions
BOXSL Fastening base L=2500
BOXRCG Central transmission
BOXAV1 Accessory for fastening onto wood
BOXG Coupling for poles
BOXA Pole
BOXSU Transmission support
BOXAS Grooved coupling
BOXGM Motor coupling
3. INSTALLATION
Unless otherwise specied, all measurements are expressed
in millimetres (mm).
3.1 Preliminary checks
Check the dimensions of the up and over door, the type of installa-
tion, the use limits of the gearmotor, and the necessary accessories.
3.2 Geared motor installation
- Remove the automation from its packaging.
Warning: the plastic parts are inserted but not xed.
- Remove the courtesy light [2], the casing [3] and the bottom
casing [4], then separate the gearmotor from the base plate
[7] by loosening the screws [A].
- Fix the base plate [7], respecting the measurements indi-
cated in g. 3-4-5.
Warning: using appropriate spacers or BOXSL, arrange a
solid fastening surface for the gearmotor at the height of
the frame of the up and over door.
- If using the BOXSL fastening plate:
- x the BOXSL on the up and over door;
- insert the gearmotor with the base plate [7] on the BOXSL
and fasten it with the 2 screws supplied.
- Fix the accessories, as shown in g. 6-7-8-9.
- Fix the corner-joint onto the upper frame of the up and over
door, in line with the motor arm, as shown (g.11A).
If it is not possible to assemble the corner-joint on the upper
part of the up and over door, refer to g.11B.
Warning: the dimensions of the poles, the position of the tran-
smissions, and the wall coupling for the corner-joint for resting
the arm must be established so that the motor arms do not
collide with the support arms of the up and over door. When it
is impossible to avoid the clashing with the tilting arm (with the
motor arms straight), use the curved motor arms BOXB2C.
After installing the motor(s) on the up and over door, release the
motor and check the door can be easily moved by hand. If the up
and over door is too heavy, it is essential to increase the weight
of the counterweights until the frame is fully balanced.
For up and over doors with L>2700mm, it is necessary to extend
the transmission shaft, using the accessories BOXA and BOXG.
For wooden up and over doors, use the accessory BOXAV1.
If the arms are not long enough, use the extensions BOX2P.
If you want to release the motor from the outside, using the key
5 m
H
4 m
3 m
2 m
1 m
L
1 m2 m3 m 4 m 5 m
5 m
H
4 m
3 m
2 m
1 m
L
1 m2 m3 m 4 m 5 m
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw DITEC BOX40 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van DITEC BOX40 in de taal/talen: Duits, Engels, Frans, Italiaans, Portugees, Spaans als bijlage per email.

De handleiding is 4,42 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info