728147
46
Verklein
Vergroot
Pagina terug
1/136
Pagina verder
Unied Access Point Administrator’s Guide
Unied Access Point Administrator’s Guide
Page 46
October 2017
Section 4 - Managing the Access Point
Field Description
MCS (Data Rate)
Settings (802.11n
modes only)
This eld shows the Modulation and Coding Scheme (MCS) index values supported by the
radio. Each index can be enabled and disabled independently.
Broadcast/Multicast
Rate Limiting
Enabling multicast and broadcast rate limiting can improve overall network performance by
limiting the number of packets transmitted across the network.
By default the Multicast/Broadcast Rate Limiting option is disabled. Until you enable
Multicast/Broadcast Rate Limiting, the following elds will be disabled:
•) Rate Limit - Enter the rate limit you want to set for multicast and broadcast trafc. The
limit should be greater than 1, but less than 50 packets per second. Any trafc that
falls below this rate limit will always conform and be transmitted to the appropriate
destination. The default and maximum rate limit setting is 50 packets per second.
•) Rate Limit Burst - Setting a rate limit burst determines how much trafc bursts can
be before all trafc exceeds the rate limit. This burst limit allows intermittent bursts of
trafc on a network above the set rate limit. The default and maximum rate limit burst
setting is 75 packets per second.
DHCP Offer/ACK to
Unicast
Enabling this feature will convert BOOTP replies from DHCP server to Unicast and send to
the requesting wireless client.
Multicast to Unicast Enabling this feature will convert all multicast data stream to unicast stream and send to the
associated wireless clients.
Forced Roaming Enabling this feature will detect and disconnect wireless clients based on the client RSSI. If
the client RSSI falls below the roaming threshold value, the client will be disassociated.
Further association attempts will be monitored and disconnected 3 times if its RSSI is below
the threshold value. If still the client tries association 4th time, the association will be logged
and allowed to connect.
TSPEC Mode Regulates the overall TSPEC mode on the AP. The options are:
•) On — The AP handles TSPEC requests according to the TSPEC settings you
congure on the Radio page. Use this setting if the AP handles trafc from QoS-
capable devices, such as a Wi-Fi CERTIFIED phone.
•) Off — The AP ignores TSPEC requests from client stations. Use this setting if you do
not want to use TSPEC to give QoS-capable devices priority for time-sensitive trafc.
TSPEC Voice ACM
Mode
Regulates mandatory admission control (ACM) for the voice access category. The options
are:
•) On A station is required to send a TSPEC request for bandwidth to the AP before
sending or receiving a voice trafc stream. The AP responds with the result of the
request, which includes the allotted medium time if the TSPEC was admitted.
•) Off A station can send and receive voice priority trafc without requiring an admitted
TSPEC; the AP ignores voice TSPEC requests from client stations.
TSPEC Voice ACM
Limit
Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless
medium using a voice AC to gain access.
TSPEC Video ACM
Mode
Regulates mandatory admission control for the video access category. The options are:
•) On A station is required to send a TSPEC request for bandwidth to the AP before
sending or receiving a video trafc stream. The AP responds with the result of the
request, which includes the allotted medium time if the TSPEC was admitted.
•) Off A station can send and receive video priority trafc without requiring an admitted
TSPEC; the AP ignores video TSPEC requests from client stations.
TSPEC Video ACM
Limit
Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless
medium using a video AC to gain access.
TSPEC BE ACM
Mode
Regulates mandatory admission control for the best effort access category. The options are:
On-A station is required to send a TSPEC request for bandwidth to the AP before
sending or receiving a best effort trafc stream. The AP responds with the result of the
request, which includes the allotted medium time if the TSPEC was admitted.
Off-A station can send and receive best effort priority trafc without requiring an admitted
TSPEC; the AP ignores best effort TSPEC requests from client stations.
TSPEC BE ACM
Limit
Specify an upper limit on the amount of trafc the AP attempts to transmit on the wireless
medium using a best effort AC for stations roamed to this AP using Fast BSS Transition.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw D-Link DWL-6620APS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van D-Link DWL-6620APS in de taal/talen: Engels als bijlage per email.

De handleiding is 7,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van D-Link DWL-6620APS

D-Link DWL-6620APS Installatiehandleiding - English - 24 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info