All rights reserved. This publication may not be reproduced, in whole or in part, without prior expressed written permission from D-Link Corporation, Inc.
Preface
RevisionDateDescription
1.00December 23, 2019Initial release
ErP Power Usage
This device is an Energy Related Product (ErP) with High Network Availability (HiNA), and automatically switches to a power-saving Network
Standby mode within 1 minute of no packets being transmitted. It can also be turned o through a power switch to save energy when it is not
• An active subscription with an Internet Service Provider using one of the
following connection types:
• A VDSL/ADSL connection to a telephone line using the DSL port
• An 802.11ac/n/g/b/a wireless or Ethernet port
Web-based Conguration
Utility Requirements
Computer with the following:
• Microsoft Windows® 10/8/7/Vista/XP SP3 or Mac with OS X 10.7 or higher
• An installed Ethernet adapter
Browser Requirements:
• Internet Explorer 8 or higher
• EDGE Browser 20 or higher
• Firefox 20 or higher
• Safari 4 or higher
• Chrome 17 or higher
Windows® Users: Make sure you have the latest version of Java installed. Visit
www.java.com to download the latest version.
System Requirements
3D-Link DSL-3788 User Manual
Section 1 - Product Overview
Introduction
The D-Link DSL-3788 Wireless AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router shares your DSL Internet connection
over blazing fast Wireless AC. It also comes equipped with a USB port, and four Gigabit Ethernet 10/100/1000 ports.
The DSL-3788's USB sharing technology lets you take advantage of le sharing. Simply plug in a USB storage drive into the USB
port on the back of your DSL-3788 and you can access les, stream videos, view photos, or listen to music on your laptop or
mobile devices. The intuitive interface lets anyone immediately connect to a variety of entertainment options stored on your
own storage device.
The DSL-3788 provides incredible speeds, smart antenna technology, and fast ports.
4D-Link DSL-3788 User Manual
Section 1 - Product Overview
• Faster Wireless Networking - The DSL-3785 features the updated 802.11ac Wave 2 specication, which
improves on the bandwidth, range, and speed of 802.11ac Wave 1, and can deliver up to 1200 Mbps* to your
wireless devices. It operates on both the 2.4 GHz and 5 GHz bands to allow separation of trac so users can
participate in high-bandwidth activities, such as video streaming, online gaming, and real-time audio, without
aecting low-priority trac like email and web surng.
• Compatible with 802.11n/g/b/a Devices - The DSL-3788 is still fully backwards compatible with the 802.11n,
802.11g, and 802.11a standards, so it can connect with existing 802.11n, 802.11g, 802.11b, and 802.11a wireless
devices.
• Advanced Features - The web-based user interface displays a number of advanced network management
features including:
• Filtering - Easily apply content ltering based on IP address, MAC address, URL, and/or domain
name.
• Scheduling - The rewall, wireless, and port forwarding features can be scheduled to be active on a
schedule you dene.
• User-friendly Setup Wizard - Through its easy-to-use web-based user interface, the DSL-3788 lets you control
what information is accessible to those on the wireless network, whether from the Internet, or from your
company’s server. Congure your router to your specic settings within minutes.
* Maximum wireless signal rate derived from IEEE Standard 802.11a, 802.11b, 802.11g, 802.11n, and 802.11ac specications. Actual data throughput will vary. Network conditions
and environmental factors, including volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental
conditions will adversely aect wireless signal range.
Features
5D-Link DSL-3788 User Manual
Section 1 - Product Overview
Hardware Overview
Back Panel
1Power connectorConnector for the supplied power adapter.
2USB 2.0 portConnects to USB ash drives to share content.
3Giga Ethernet ports
(1-4)
Connects to network devices such as computers, switches, storage (NAS) devices and
game consoles at speeds of up to 1000 Mbps.
4Reset buttonTo reset the device to its factory default settings, use a paper clip to press and hold the
reset button for 5 seconds.
5DSL portConnects to an DSL-enabled telephone line.
14532
6D-Link DSL-3788 User Manual
Section 1 - Product Overview
Side Panel
1WPS buttonPress to start the WPS process and automatically create a secure connection to a WPS client.
2Power buttonPress the power button to power the DSL-3788 on and o.
1
2
7D-Link DSL-3788 User Manual
Section 1 - Product Overview
234561
Hardware Overview
LEDs
1PowerSolid greenA solid green light indicates the device is powered on and working properly.
Solid redA solid red light indicates that the device is booting or an error has occurred.
2Broadband
Solid greenA solid green light indicates a proper connection to a DSL-enabled telephone line.
Blinking greenA blinking green light indicates the DSL port is negotiating a connection.
OAn unlit light indicates no connection to a DSL enabled-telephone line.
3Internet
Solid greenA solid green light indicates an Internet connection.
Blinking greenA blinking green light indicates Internet activity.
Solid redA solid red light indicates a PPP or DHCP failure. Check your username and password.
OAn unlit light indicates there is no broadband connection available, or the Internet
connection attempt timed out.
4Wireless
Solid greenA solid green light indicates that the 2.4/5 GHz wireless networks are enabled.
Blinking greenA blinking green light indicates wireless activity.
OAn unlit light indicates that the wireless functionality is disabled.
5Ethernet
Solid greenA solid green light indicates a device is connected to the respective LAN port.
Blinking greenA blinking green light indicates LAN port activity.
OAn unlit light indicates that no Ethernet devices are connected.
6WPSBlinking greenA blinking green light indicates the WPS process is active.
8D-Link DSL-3788 User Manual
Section 2 - Installation
Before you Begin
Installation
This section will walk you through the installation process. Placement of the router is very important. Do not place the router in
an enclosed area such as a closet, cabinet, attic, or garage.
Note: This installation section is written for users who are setting up their home Internet service with the DSL-3788 Wireless
AC1200 Dual-Band Gigabit ADSL2+/VDSL2 Modem Router for the rst time. If you are replacing an existing DSL modem and/or
router, you may need to modify these steps.
• Make sure to have your DSL service information provided by your Internet Service Provider handy. This
information is likely to include your DSL account's username and password. Your ISP may also supply you with
additional WAN conguration settings which are necessary to establish a connection. This information may
include the connection type (DHCP IP, Static IP, PPPoE, or PPPoA) and/or ATM PVC details.
• If you are connecting a considerable amount of networking equipment, it may be a good idea to take the time to
label each cable or take a picture of your existing setup before making any changes.
• We suggest setting up your DSL-3788 from a single device and verifying that it is connected to the Internet before
connecting additional devices.
• If you have DSL and are connecting via PPPoE, make sure you disable or uninstall any PPPoE connection software
such as WinPoET, BroadJump, or EnterNet 300 from your computer as the DSL-3788 will be providing this
functionality.
9D-Link DSL-3788 User Manual
Section 2 - Installation
Wireless Installation Considerations
The D-Link wireless router lets you access your network using a wireless connection from virtually anywhere within the
operating range of your wireless network. Keep in mind that the number, thickness and location of walls, ceilings, or other
objects that the wireless signals must pass through may limit the range. Typical ranges vary depending on the types of
materials and background RF (radio frequency) noise in your home or business. The key to maximizing wireless range is to
follow these basic guidelines:
1. Keep the number of walls and ceilings between the D-Link router and other network devices to a minimum -
each wall or ceiling can reduce your adapter’s range from 3 to 90 feet (1 to 30 meters.) Position your devices so
that the number of walls or ceilings is minimized.
2. Be aware of the direct line between network devices. A wall that is 1.5 feet (0.5 meters) thick, at a 45-degree
angle appears to be almost 3 feet (1 meter) thick. At a 2-degree angle it looks over 42 feet (14 meters) thick!
Position devices so that the signal will travel straight through a wall or ceiling (instead of at an angle) for better
reception.
3. Building materials make a dierence. A solid metal door or aluminum studs may have a negative eect on
range. Try to position access points, wireless routers, and computers so that the signal passes through drywall or
open doorways. Materials and objects such as glass, steel, metal, walls with insulation, water (sh tanks), mirrors,
le cabinets, brick, and concrete will degrade your wireless signal.
4. Keep your product away (at least 3 to 6 feet or 1 to 2 meters) from electrical devices or appliances that generate
RF noise.
5. If you are using 2.4 GHz cordless phones or X-10 (wireless products such as ceiling fans, lights, and home
security systems), your wireless connection may degrade dramatically or drop completely. Make sure your 2.4
GHz phone base is as far away from your wireless devices as possible. The base transmits a signal even if the
phone is not in use.
10D-Link DSL-3788 User Manual
Section 2 - Installation
Manual Setup
1Position your DSL-3788 near your PC and a telephone wall jack which provides DSL service. Keep the modem router in
an open area for better wireless coverage.
2Plug one end of the supplied DSL phone cable into the DSL port on the back of the modem router, and the other end
into the telephone wall jack.
Note: If a DSL microsplitter/microlter is included in the package contents, install it in line with your telephone wall
jack.
PC
DSL-3788Phone
PC
DSL-3788Phone
11D-Link DSL-3788 User Manual
Section 2 - Installation
Connect the supplied power adapter to the modem router and a power outlet, and press the power button. The
device LEDs will light up. Wait approximately three minutes before moving on to step 4.
Caution: Use only the included power adapter with this product.
Plug one end of the supplied Ethernet cable into a yellow Ethernet port on the back of the modem router, and the
other end into the Ethernet port on your computer.
If you are setting up the DSL-3788 using a laptop or mobile device, connect to it using the Wi-Fi network name
and password printed on the label attached to the back of your router.
3
4
DSL-3788
Power
PC
DSL-3788
Power
PC
PC
Phone
Phone
12D-Link DSL-3788 User Manual
Section 3 - Getting Started
There are two ways you can congure your router to connect to the Internet and connect to your clients:
• D-Link Setup Wizard - This wizard will launch when you log into the router for the rst time. Refer to Setup Wizard on
page 13.
• Manual Setup - Log into the router and manually congure your router. Refer to Conguration on page 19.
Getting Started
13D-Link DSL-3788 User Manual
Section 3 - Getting Started
Setup Wizard
If this is your rst time using the router, open your web browser and enter
http://dlinkrouter.local./ in the address bar.Alternatively, enter the IP address
of the router (default: http://192.168.1.1). The default password is admin.
The wizard is designed to guide you through a step-by-step process to congure
your new D-Link router and connect to the Internet. Ensure that your DSL phone
cable is connected to both the router and the wall jack.
Click Next to continue.
First, you must select your WAN Access Type. The options are ADSL, VDSL, or
Auto. To quickly nd your ISP's settings, select your Country and ISP. The VPI
and VCI values will automatically be congured.
Click Next to continue.
14D-Link DSL-3788 User Manual
Section 3 - Getting Started
If the router cannot determine your connection type, a list of connection types
to choose from will be displayed. Select your Internet connection type (this
information can be obtained from your Internet Service Provider) and click
Next to continue.
If the router detected or you selected PPPoE, enter your PPPoE username and
password, choose the Connection Type if asked, and click Next to continue.
Note: Make sure to remove your PPPoE software from your computer. The software
is no longer needed and will not work through a router.
Setup Wizard (continued)
15D-Link DSL-3788 User Manual
Section 3 - Getting Started
If you selected Static IP, enter the IP address, subnet mask, gateway address,
and DNS servers provided by your ISP, then choose the Connection Type if
asked. Click Next to continue.
Setup Wizard (continued)
If the router detected or you selected PPPoA, enter your PPPoA username and
password, choose the Connection Type if asked, and click Next to continue.
Note: Make sure to remove your PPPoA software from your computer. The software
is no longer needed and will not work through a router.
PPPoA connection type is only available for ADSL connections.
16D-Link DSL-3788 User Manual
Section 3 - Getting Started
Setup Wizard (continued)
If the router detected or you selected Dynamic IP Address (DHCP), choose
the Connection Type if asked. Click Next to continue.
If you selected Bridge, choose the Connection Type if asked. Click Next to
continue.
17D-Link DSL-3788 User Manual
Section 3 - Getting Started
Setup Wizard (continued)
Create a Wi-Fi SSID and password for both the 2.4 GHz and 5 GHz wireless
networks. The SSIDs must be between 3 and 32 alphanumeric characters in
length and may include hyphens, underscores, periods, and the @ symbol.
The passwords must be between 8 and 63 alphanumeric characters in length.
Your wireless clients must use these SSIDs and passwords in order to connect
to your wireless networks.
Click Next to continue.
To help protect your router, please enter a new password. You will be prompted
for this password every time you want to use the router’s web conguration
utility. Click Next to continue.
18D-Link DSL-3788 User Manual
Section 3 - Getting Started
The Summary window will display your settings. Click Next if you are satised,
or click Back to make changes to them. The wizard will close and your settings
will be saved.
Congratulations, setup is complete.
Setup Wizard (continued)
19D-Link DSL-3788 User Manual
Section 4 - Conguration
Conguration
Input the default password as admin. If you previously followed the Setup
Wizard (see page 13), please use the admin password you entered during
the wizard. Click Log In to proceed.
Note: If you cannot remember your password and cannot log in, press the reset
button (see page 5) to restore the router to its default settings.
To access the conguration utility, open a web browser such as Internet
Explorer and enter http://dlinkrouter.local./
Windows and Mac users may also connect by typing the IP address of the
router (by default this is http://192.168.1.1) in the address bar.
Home
The Home page displays the current status of the router in the form of an
interactive diagram. There are four main sections: Internet, D-Link, Connected
Clients, and USB Device. You can click each icon to display information about
each section at the bottom of the screen. The menu bar at the top of the
page will allow you to quickly navigate to the Settings and Management
functions. You may quickly jump back Home at any time.
Note: The system will automatically log out after a period of inactivity.
20D-Link DSL-3788 User Manual
Section 4 - Conguration
To bring up more details about your Internet connection, click on the Internet
icon. The Internet Connection status at the top of the diagram will reect the
status of the currently selected WAN interface.
If your Internet is disconnected, indicated by a red X, you can launch the Setup
Wizard to correct the issue by clicking Wizard from the Settings menu on
the bar on the top of the page.
You can see the DSL connection status and IPv4 information at the bottom of
the page. Clicking the DSL button will display DSL port information.
Internet
21D-Link DSL-3788 User Manual
Section 4 - Conguration
IPv4
DSL Type:Displays the current DSL type, either ADSL or VDSL.
Cable Status:Displays the current cable connection status.
Link Rate:Displays the currently negotiated connection speed.
Connection Type:Displays the network protocol used to obtain an IP address.
Network Status:Displays the current network connection status.
Connection
Uptime:
Displays the amount of time the connection has been connected.
MAC Address:Displays the MAC address of this interface.
IP Address:Displays the current WAN IPv4 address.
Subnet Mask:Displays the current subnet mask.
Default Gateway:Displays the current IPv4 default gateway.
Primary DNS
Server:
Displays the current primary DNS server.
Secondary DNS
Server:
Displays the current secondary DNS server.
IPv4
Click the IPv4 button to see the IPv4 information for the DSL interface. If you
have congured your ADSL/VDSL connection to use PPPoE with On-Demand
or Manual settings, you can connect to or disconnect from the Internet by
pressing the Connect or Disconnect buttons.
22D-Link DSL-3788 User Manual
Section 4 - Conguration
DSL
Line State:Displays the current status of the data link connection to your ISP.
Modulation:Displays the current DSL standard in use.
Annex Mode:Displays the current Annex mode in use.
DSL (Sync)
Uptime:
Displays the DSL connection uptime.
SNR Margin:Displays the Signal-to-noise margin.
Line Attenuation:Displays the current signal attenuation.
Output Power:Displays the output power of the DSL modem.
ES, SES, UAS, FEC,
CRC:
These error correction counts are used for diagnostic purposes. If
you are having trouble with your ISP, these values may provide useful
information for technicians.
DSL
Click the DSL button to see the DSL port connection information. The DSL tab
displays information regarding the DSL data connection.
23D-Link DSL-3788 User Manual
Section 4 - Conguration
DSL-3788
Click on the DSL-3788 icon to view details about the router and its wireless
settings.
Here you can see the router’s current wireless networks and passwords, as well
as the local area network MAC and IPv4 addresses.
To recongure the network settings, click the Go to settings link, from the
Settings menu at the top of the page, select Network. Refer to page Network
on page 43 for more information.
To recongure the wireless settings, click the Go to settings link, from the
Settings menu at the top of the page, select Wireless. Refer to Wireless on
page 38 for more information.
24D-Link DSL-3788 User Manual
Section 4 - Conguration
Connected Clients
Click on the Connected Clients icon to view details about the clients currently
connected to the router and their IP addresses.
To edit each client’s settings, click the pencil icon on the client you want to
edit.
Edit Rule
Name:Enter a custom name for this client.
Vendor:Displays the vendor of the device.
MAC Address:Displays the MAC address of the device.
IP Address:Enter a specic IP address for this client if Reserve IP is enabled.
Reserve IP:Enable to reserve this IP address for this client.
Click Save when you are done.
25D-Link DSL-3788 User Manual
Section 4 - Conguration
USB Device
Click on the USB Device icon to view details about the currently connected
USB device, DLNA Media Server, SharePort, and Windows File Sharing settings.
If you have a USB device connected, you can see its name and how much free
space it has.
To congure your USB settings, click Go to settings and refer to page USB
Device on page 25 for more information.
For information on how to access your USB drive from a Windows-based PC
refer to Connect and Share a USB Storage Device on page 69.
26D-Link DSL-3788 User Manual
Section 4 - Conguration
Settings
Wizard
Internet
To access the Setup Wizard page, click Wizard from the Settings menu on the bar on the top of the page. This is the same
wizard that appears when you start the router for the rst time. Refer to Setup Wizard on page 13 for more information.
The following pages will describe how to manually congure how your
DSL-3788 connects to the Internet. To access this page, click Internet from the
Settings menu on the bar on the top of the page. The DSL-3788 supports
multiple WAN connection types and WAN failover. We recommend setting up
Internet WAN connections one at a time, Save the conguration, and conrm
the connection works before returning to this section to add additional WAN
connections.
The following conguration pages are divided by WAN Access Type.
WAN CONNECTION TYPE
Congure your
WAN Connection:
Select WAN interface to congure. The options are Auto, ADSL, VDSL,
or Ethernet.
Select a WAN Connection and refer to its conguration page for setup
information.
For ADSL, refer to ADSL on page 27.
For VDSL, refer to VDSL on page 29.
For Ethernet, refer to Ethernet on page 30.
Auto refers to the Internet connection congured by the Setup Wizard.
27D-Link DSL-3788 User Manual
Section 4 - Conguration
ADSL
ADSL is one of the rst home broadband technologies introduced. ADSL uses
the DSL port on your DSL-3788 to connect to the Internet. In order for your
DSL-3788 to use ADSL, you must congure the WAN Connection Type and
your WAN Settings.
WAN Connection Type
Congure your
WAN connection:
Select ADSL to congure ADSL connection settings.
WAN Settings
Service Number:Select the service number from the drop-down menu. If no service
has previously been added, or you wish to add a new one, select Add.
Enable Virtual
Circuit:
Select whether to enable or disable this Virtual Circuit.
If you Enabled the selected interface, the following options are available:
VPI:Enter the Virtual Path Indicator (0 - 255).
VCI:Enter the Virtual Channel Indicator (32 - 65535).
Service Category:Select the type of ATM trac contract, UBR, CBR, NRT-VBR, or RT-
VBR.
If you selected UBR, CBR, NRT-VBR, or RT-VBR. the following option is available:
Vlan ID:Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.
28D-Link DSL-3788 User Manual
Section 4 - Conguration
ADSL (continued)
If you selected CBR, NRT-VBR,or RT-VBR, the additional following options are available:
Peak Cell Rate
(PCR):
Enter the Peak Cell Rate in cells per second.
If you selected NRT-VBR or RT-VBR, the additional following options are available:
Sustainable Cell
Rate(SCR):
Enter the Sustainable Cell Rate in cells per second.
Maximum Burst
Size(MB/s):
Enter the Maximum Burst Size in MB per second.
To set your IPv4 connection parameters of WAN Settings, refer to WAN
Settings on page 31.
29D-Link DSL-3788 User Manual
Section 4 - Conguration
VDSL
VDSL is one of the latest and fastest home broadband technologies. VDSL uses
the DSL port on your DSL-3788 to connect to the Internet. In order for your
DSL-3788 to use VDSL, you must congure the ATM VC Settings and your WAN
Settings.
Congure your
WAN connection:
Select VDSL to congure VDSL connection settings.
If you click on Advanced Settings, the following WAN Settings are available:
PTM VC Settings
Service Number:Select the service number from the drop-down menu. If no service
has previously been added, or you wish to add a new one, select Add.
Enable Virtual
Circuit:
Select whether to enable or disable this Virtual Circuit.
Vlan ID:Enter the VLAN ID. Enter a value from 10 - 4096. The default value is
835.
To set your IPv4 connection parameters of WAN Settings, refer to WAN
Settings on page 31.
30D-Link DSL-3788 User Manual
Section 4 - Conguration
Ethernet
Your DSL-3788 is equipped with a multi-purpose Gigabit Ethernet LAN/WAN port which
can be used to connect to the Internet. This port may be used to connect to other Ethernet
based networks. In order for your DSL-3788 to use Ethernet, you must congure the Ethernet
Settings and your WAN Settings.
Congure your
WAN connection:
Select Ethernet to congure Ethernet connection settings.
WAN Settings
Service Number:Select a service number from the drop-down menu, or to create a
new service number, click Add.
Enable Virtual
Circuit
Enable or disable virtual circuit, also referred to as VLAN tagging.
If you selected Enable Virtual Circuit, the following options are available:
VLAN ID:Enter the VLAN ID. The value should be 0, or 0-4079.
Proceed to IPv4 Settings on page 31 or IPv6 Settings on page 79.
31D-Link DSL-3788 User Manual
Section 4 - Conguration
WAN Settings
Dynamic IP (DHCP)
Select Dynamic IP Address (DHCP) to obtain an IP address automatically
from your ISP. Select this option if your ISP does not provide you with a specic
IP address.
WAN Settings
Connection:Select Dynamic IP Address (DHCP).
WAN Service Type:Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Connection Type:Select Bridged IP LLC or Bridged IP VC-MUX.
MTU:Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:Select None or Default Route.
NAT Enable:Enable or disable Network Address Translation.
Click Save when you are done.
32D-Link DSL-3788 User Manual
Section 4 - Conguration
Static IP
Select Static IP if your ISP provides you with a specic IP address.
WAN Settings
Connection:Select Static IP Address.
WAN Service Type:Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Connection Type:Select Bridged IP LLC, Bridged IP VC-MUX, Routed IP LLC (IPoA),or
Routed IP VC-Mux (IPoA).
IP Address:Enter the IP address provided by your ISP.
Subnet Mask:Enter the subnet mask provided by your ISP.
Gateway Address:Enter the default gateway address provided by your ISP.
MTU:Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Primary DNS
Server
Enter the primary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Secondary DNS
Server
Enter the secondary DNS server IP address assigned by your ISP. This
address is usually obtained automatically from your ISP.
Usage:Select None or Default Route.
NAT Enable:Enable or disable Network Address Translation.
Click Save when you are done.
33D-Link DSL-3788 User Manual
Section 4 - Conguration
PPPoE
Select PPPoE if your ISP provides and requires you to enter a PPPoE username
and password in order to connect to the Internet.
WAN Settings
Connection:Select PPPoE.
WAN Service Type:Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Username:Enter the username provided by your ISP.
Password:Enter the password provided by your ISP.
Connection Type:Select PPPoE LLC or PPPoE VC-Mux.
If you selected Static IP Address, the following option is available:
Static IP Address:Enter the IP address provided by your ISP.
MTU:Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:Select None or Default Route.
NAT Enable:Enable or disable Network Address Translation.
Authentication
Protocol:
Select the authentication protocol your ISP uses. The options are
Auto, PAP, or CHAP.
34D-Link DSL-3788 User Manual
Section 4 - Conguration
Connect mode
select:
Set the connection to be Always-on, Connect-On-Demand, or
Manual.
If you selected Connect-On-Demand, the following option is available:
Maximum Idle
Time:
Enter the amount of time the router will maintain the Internet
connection before disconnecting if there is no activity.
Click Save when you are done.
35D-Link DSL-3788 User Manual
Section 4 - Conguration
PPPoA
Select PPPoA if your ISP provides and requires you to enter a PPPoA username
and password in order to connect to the Internet. For ADSL connections only.
WAN Settings
Connection:Select PPPoA.
WAN Service Type:Select a service type from the list. Choose from INTERNET, TR069,
or TR069_INTERNET. This information should be provided by your
ISP. If you are conguring your connection manually and your ISP
has not specied this setting, selecting INTERNET is recommended.
Username:Enter the username provided by your ISP.
Password:Enter the password provided by your ISP.
Connection Type:Select PPPoA LLC or PPPoA VC-Mux.
MTU:Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Usage:Select None or Default Route.
NAT Enable:Enable or disable Network Address Translation.
Authentication
Protocol:
Select the authentication protocol your ISP uses. The options are
Auto, PAP, or CHAP.
Connect mode
select:
Set the connection to be Always-on, Connect-On-Demand, or
Manual.
36D-Link DSL-3788 User Manual
Section 4 - Conguration
If you selected Connect-On-Demand, the following option is available:
Maximum Idle
Time:
Enter the amount of time the router will maintain the Internet
connection before disconnecting if there is no activity.
Click Save when you are done.
37D-Link DSL-3788 User Manual
Section 4 - Conguration
Bridge Mode
Select Bridge Mode to use the DSL-3788 as a network bridge. This page has
only one setting.
WAN Settings
Connection:Select Bridge.
Connection Type:Select Bridged Only LLC or Bridged Only VC-MUX.
Click Save when you are done. You will need to connect and congure
another device to connect to your ISP.
38D-Link DSL-3788 User Manual
Section 4 - Conguration
From this page you can congure your wireless network settings. To access this
page, click Wireless from the Settings menu on the bar on the top of the
page.
2.4 GHz
Status:Enable or disable the 2.4 GHz wireless network.
SSID:Create a name for your wireless network using up to 32 characters.
Password:Create a password to use for wireless security.
5 GHz
Status:Enable or disable the 5 GHz wireless network.
SSID:Create a name for your wireless network using up to 32 characters.
Password:Create a password to use for wireless security.
Wi-Fi Protected Setup
PBC Start:This triggers the WPS pairing process. Refer to WPS Button on page
79 for more information about WPS.
Click Save when you are done. The following pages describe the Advanced
Settings conguration options in detail.
Wireless
39D-Link DSL-3788 User Manual
Section 4 - Conguration
Advanced Settings
Clicking Advanced Settings allows you to manually congure security,
wireless radio operation, and schedule settings.
Security:Choose None, WPA2,or WPA/WPA2.
WPA2
Using WPA2with AES encryption is recommended. Using it you can be
reasonably assured that your wireless connection is secure.
Security:WPA2
WPA Type
If you select 802.1x the following options are available:
Server IP Address:Enter the IP address of the RADIUS Server.
Port:Enter the port used by the RADIUS Server.
Secret:Enter the secret used by the RADIUS Server.
Cipher Type:Select either AES or Both (AES/TKIP). AES is recommended.
Group Key
Interval:
Enter the Group Key Interval. The default is 100 seconds.
If you select Pre-shared key the following options are available:
Cipher Type:Select either AES or Both (AES/TKIP). AES is recommended.
Group Key
Interval:
Enter the Group Key Interval. The default is 100 seconds.
40D-Link DSL-3788 User Manual
Section 4 - Conguration
WPA/WPA2
WPA/WPA2is a reasonably strong wireless security encryption type. Use this
for wireless clients which do not support WPA2 encryption.
Security:WPA/WPA2
WPA Type
If you select 802.1x the following options are available:
Server IP Address:Enter the IP address of the RADIUS Server.
Port:Enter the port used by the RADIUS Server.
Secret:Enter the secret used by the RADIUS Server.
Cipher Type:Select AES, TKIP, or Both. AES is recommended.
Group Key
Interval:
Enter the Group Key Interval. The default is 100 seconds.
If you select Pre-shared key the following options are available:
Cipher Type:Select AES, TKIP, or Both. AES is recommended.
Group Key
Interval:
Enter the Group Key Interval. The default is 100 seconds.
Advanced Settings (continued)
41D-Link DSL-3788 User Manual
Section 4 - Conguration
2.4 GHz / 5 GHz Advanced Settings
Hide SSID:The default setting is Disabled. Select Enabled if you do not want
to broadcast the SSID of your wireless network.
Note: Hiding your SSID is not a form of security alone.
WMM:Enable or disable WMM QoS for your wireless network. This can
help to improve the quality of video and voice applications for your
wireless clients.
Wi-Fi Protected
Enable:
Enabled or disable WPS functionality of this device.
Wi-Fi Protected
Status:
The current WPS functionality status is displayed.
Beacon-Interval:Set the rate at which your wireless network is advertised. The default
is 100 milliseconds.
DTIM:Specify the Delivery Trac Information Map (DTIM) message interval.
Transmitting
Power:
Select the desired wireless transmission power. The available options
are 100%, 50%, 25%, or 12.5%. The default is 100%.
Threshold for
fragmentation
(2.4 GHz only):
The fragmentation threshold, which is specied in bytes, determines
whether packets will be fragmented. Packets exceeding the 2346
byte threshold will be fragmented before transmission. 2346 is the
default setting.
2.4 GHz 802.11
Mode:
Select the desired wireless networking standard(s) to use. The
available options are 11B Only, Mixed 11G/B or Mixed 802.11b/g/n.
Advanced Settings (continued)
42D-Link DSL-3788 User Manual
Section 4 - Conguration
2.4 GHz Channel
Width:
Channel Width is available if you select Mixed 11N/G/B for 802.11
Mode. Select 20/40 if you are using both 802.11n and non-802.11n
devices, or select 20 MHz if you want to disable 40 MHz bandwidth
communication. The recommended setting is 20/40.
5 GHz 802.11
Mode:
Select the desired wireless networking standard(s) to use. The
available options are 11A Only, 11A/N Mixed Mode or Mixed
11AC/N/A.
5 GHz Channel
Width:
Select the desired channel width. The available options are 20 MHz,
20/40 MHz, or 20/40/80 MHz. Depending upon the selected 5 GHz
802.11 Mode, some options may be unavailable.
Channel:Select the desired channel for your wireless network to use. This
option is only available if Auto Channel is disabled.
Auto Channel:Enable or disable automatic wireless channel selection.
IEEE 802.11H
Support
DFS and TPC settings are automatically enabled.
Preamble Type:Enable or disable short preamble type.
Click Save when you are done.
Advanced Settings (continued)
43D-Link DSL-3788 User Manual
Section 4 - Conguration
Network
Router Settings
Router IP Address:Enter the IP address of the router for this interface. The default IP
address is 192.168.1.1.
If you change the IP address, once you click Save, you will need
to enter the new IP address in your browser to get back into the
conguration utility.
Subnet Mask:Enter the subnet mask of this interface. The default subnet mask is
255.255.255.0.
UPNP Settings
UPNP:Enable or disable UPNP.
Click Save when you are done or click Advanced Settings.
Advanced Settings
You may select one of the following DHCP mode behaviors:
Disable DHCP
Server:
Select this option to disable the DHCP server. No further conguration
is available.
This section will allow you to change the local network settings of the router
and to congure the DHCP settings. To access this page, click Network from
the Settings menu on the bar on the top of the page.
44D-Link DSL-3788 User Manual
Section 4 - Conguration
Enable DHCP
Server:
Select this option to enable the DHCP server.
DHCP Relay:Select this option to enable DHCP Relay. Use this if you have a
dedicated DHCP server on your network.
If you selected Enable DHCP, the following options are available:
DHCP IP Address
Range:
Enter the starting and ending IP addresses for the DHCP server’s IP
assignment.
Note: If you statically (manually) assign IP addresses to your computers
or devices, make sure the IP addresses are outside of this range or you
may have an IP conict.
DHCP Lease Time:Select the DHCP lease time from the drop down menu.
Option60 Vendor
ID:
Enter Option60 information here. (Optional)
If you selected DHCP Relay, the following options are available:
Server IP:Enter the DHCP server IP address.
Click Save when you are done.
Network - Advanced Settings
45D-Link DSL-3788 User Manual
Section 4 - Conguration
USB
This page will allow you to set up access to les on an external USB device
plugged into the router. You can do this through the local network. To access
this page, click USB from the Settings menu on the bar on the top of the
page.
DLNA Settings
DLNA:Enable or disable the DLNA media server functions, allowing
connected DLNA clients access to media les over the network.
Samba Setup
Samba:Enable or disable Windows File Sharing, or Samba. Computers and
devices which support Samba will be able to access the les on the
USB device connected to this router.
Work Group:Enter the Windows workgroup name.
Net BIOS Name:Enter the name for this device as you wish it to appear on your
network.
Click Save when you are done.
For information on how to access your USB drive from a Windows-based PC
refer to Connect and Share a USB Storage Device on page 69.
46D-Link DSL-3788 User Manual
Section 4 - Conguration
Features
Firewall
The router’s rewall protects your network from malicious attacks over the
Internet. To access this page, click Firewall from the Features menu on the
bar on the top of the page. It is recommended to leave all values at their
default Enable setting.
47D-Link DSL-3788 User Manual
Section 4 - Conguration
Application
Port triggering allows ports to be opened when trac is detected on specied
ports. This is used for facilitating communication between applications and
servers behind a NAT rewall. To access this page, click Application from the
Features menu on the bar on the top of the page.
The currently dened Application rules are displayed in the table. Some
commonly used Applications are pre-congured by default. You may create
up to eight application rules. If you wish to remove an application rule, click
on its trash can icon in the Delete column. If you wish to edit an application
rule, click on its pencil icon in the Edit column. If you wish to create a new
application rule, click the Add Rule button.
Create New Rule
Enable
Application:
Enable or disable the Application rule.
Name:Enter a name for this application.
Trigger Port Start:Enter the starting port range trac will be forwarded from.
Trigger Port End:Enter the ending port range trac will be forwarded from.
Trigger Trac
Protocol Type:
Select the protocol to trigger this rule: TCP, UDP, or All Protocol.
Open Port:Enter the port or port range to open once triggered.
Open Trac
Protocol Type:
Select the protocol to trigger this rule: TCP, UDP, or All Protocol.
Click Apply when you are done.
48D-Link DSL-3788 User Manual
Section 4 - Conguration
ACL
The Access Control List (ACL) page allows you to enable or disable various
services from being used on the LAN or WAN side. To access this page, click
ACL from the Features menu on the bar on the top of the page.
Access Control Setup
Active:Activate or deactivate the individual ACL rule.
Service IP address:Enter the IP address range to apply the rule to.
Application:Select a pre-dened service.
ACL Rule
IndexInterface:
Select the interface from the drop down menu to apply this access
control list rule to.
Access Control Listing
A list of the currently dened Access Control List rules is displayed here. Click
Edit () to create or modify a rule or Delete () to remove a rule.
Click Save when you are done.
49D-Link DSL-3788 User Manual
Section 4 - Conguration
Port Forwarding
Port forwarding allows you to specify a port or range of ports to open
for specic devices on the network. This might be necessary for certain
applications to connect through the router. To access this page, click Port
Forwarding from the Features menu on the bar on the top of the page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rule button. Click Save when you are done. If
you edit or create a rule, the following options will appear:
Create New Rule
Enable Rules:Enable or disable the port forwarding rules.
Name:Enter a name for the rule.
Interface:Select the WAN interface which the incoming service will transit.
Internal IP:Enter the IP address of the computer on your local network that you
want to allow the incoming service to.
Internal startport:Enter the starting internal port that you want to open.
Internal endpoint:Enter the ending internal port that you want to open.
External startport:Enter the starting external port that you want to open.
External endpoint:Enter the ending external port that you want to open.
Protocol:Select TCP or UDP.
50D-Link DSL-3788 User Manual
Section 4 - Conguration
Port Forwarding (continued)
Schedule:Use the drop-down menu to select the time schedule that the rule will
be enabled on. The schedule may be set to Always, or you can create
your own schedules in the Schedules section. Refer to Schedule on
page 61 for more information.
Click Apply when you are done.
51D-Link DSL-3788 User Manual
Section 4 - Conguration
DMZ (Exposed Host)
This page allows you to manually congure the router’s DMZ settings. To
access this page, click Port Forwarding from the Features menu on the
bar on the top of the page and click DMZ (Exposed Host). Since some
applications are not compatible with NAT, the device supports the use of a
DMZ IP address for a single host on the LAN. This IP address is not protected by
NAT and it is visible on the Internet with the correct type of software.
Note: Any client PC in the DMZ is exposed to various types of security risks. If
you use DMZ, take measures (such as client-based virus protection) to protect
the remaining client PCs on your LAN from possible contamination through
DMZ.
The devices currently placed in the DMZ are displayed in the table. You may
place up to 8 devices in the DMZ. If you wish to remove a DMZ rule, click on its
trash can icon in the Delete column. If you wish to edit a DMZ rule, click on its
pencil icon in the Edit column. If you wish to create a new DMZ rule, click the
Add Rule button.
Create New Rule
Enable DMZ:Enable or disable the DMZ rule.
Interface:Select the interface to apply the rule to.
IP Address:Enter the IP address of the computer on your local network that you
want to place in the DMZ.
Click Apply when you are done.
52D-Link DSL-3788 User Manual
Section 4 - Conguration
IP/MAC/Web Filtering
IP Filter
The IP Filters page manages LAN users' access to the Internet. It is possible
to permit access to the Internet for specied IP addresses within your LAN or
to restrict access for specied IP addresses. You can also dene lters for port
access. To access this page, click IP/MAC/Web Filtering from the Features
menu on the bar on the top of the page.
You may choose from the following options: Disable IP Filters, Only allow
computers with IP addresses listed below access to the network, or Only
deny computers with IP addresses listed below access to the network.
The currently dened IP lters are displayed in the table. You may dene up to
16 IP ltering rules. If you wish to remove a rule, click on its trash can icon ()
in the Delete column. If you wish to edit a rule, click on its pencil icon () in the
Edit column. If you wish to create a new rule, click the Add Rule button.
The following page contains a detailed description of rule creation.
53D-Link DSL-3788 User Manual
Section 4 - Conguration
If you enabled IP ltering, click Add Rule to create a new IP ltering rule.
Create New Rule
Name:Create a name for the rule.
Protocol:Select the protocol type: Any, UDP, TCP, or ICMP.
Source IP Address:Select AnyIP address, Single IP, or Specify IP Address (Range). If
you selected Single IP or Specify IP Address (Range), enter the IP
address into the From and To elds.
Destination IP
Address:
Select the destination to apply the rule to: ATM, PTM, or WAN.
Select AnyIP address, Single IP, or Specify IP Address (Range). If
you selected Single IP or Specify IP Address (Range), enter the IP
address into the From and To elds.
If you selected UDP or TCP as the Protocol above, you may lter Any Port, a Single Port,
or Specify a Port Range.
Schedule:Use the drop-down menu to select the time schedule that the rule will
be enabled on. The schedule may be set to Always, or you can create
your own schedules in the Schedules section. Refer to Schedule on
page 61 for more information.
Click Apply when you are done.
IP Filter (continued)
54D-Link DSL-3788 User Manual
Section 4 - Conguration
MAC Filter
The MAC lter is used to restrict or allow certain types of Ethernet Frames
through the gateway based on their source or destination MAC address. These
lters are helpful in securing or restricting trac on your local network. To
access this page, click IP/MAC Filtering from the Features menu on the bar
on the top of the page and then click the MAC Filter link. To return to the IP
Filter page, click IP Filter.
You may choose from the following options: Disable MAC Filters, Only allow
computers with MAC addresses listed below access to the network, or
Only deny computers with addresses listed below access to the network.
The currently dened MAC lters are displayed in the table. You may dene up
to 32 MAC ltering rules. If you wish to remove a rule, click on its trash can icon
() in the Delete column. If you wish to edit a rule, click on its pencil icon () in
the Edit column. If you wish to create a new rule, click the Add Rule button.
If you enable MAC ltering, click Add Rule to create a new MAC ltering rule.
Create New Rule
Name:Create a name for the rule.
MAC Address:Enter the MAC address to apply the rule to.
Schedule:Use the drop-down menu to select the time schedule that the rule will
be enabled on. The schedule may be set to Always, or you can create
your own schedules in the Schedules section. Refer to Schedule on
page 61 for more information.
Click Apply when you are done.
55D-Link DSL-3788 User Manual
Section 4 - Conguration
The website lter settings allow you to block access to certain web sites. You
can either create a list of sites to block, or create a list of sites to allow (with all
other sites being blocked). To access this page, click IP/MAC/Web Filtering
from the Features menu on the bar on the top of the page and then click
the Website Filter link. To return to the IP Filter page, click IP Filter.
If you want to create a list of sites to block, select DENY computers access to
ONLY these sites from the drop-down menu. All other sites will be accessible.
If you want to specify a list of sites to allow, select ALLOW computers access
to ONLY these sites from the drop-down menu. All other sites will be blocked.
You may specify a maximum of 16 web sites. To add a new site to the list, click
Add New Rule. If you wish to remove a rule, click on its trashcan icon () in
the Delete column. If you wish to edit a rule, click on its pencil icon () in the
edit column.
If you enable Web Filtering, click Add Rule to create a new Web Filtering
rule.
Create New Rule
Name:Create a name for the rule.
Website URL
Keyword:
Enter the Website URL Keyword to apply the rule to.
Schedule:Use the drop-down menu to select the time schedule that the rule will
be enabled on. The schedule may be set to Always, or you can create
your own schedules in the Schedules section. Refer to Schedule on
page 61 for more information.
Click Apply when you are done.
Website Filter
56D-Link DSL-3788 User Manual
Section 4 - Conguration
Static Route
The Static Routes section allows you to dene custom routes to control how
data trac is moved around your network. To access this page, click Static
Route from the Features menu on the bar on the top of the page.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Save when you are done.
If you edit or create a rule, the following options will appear:
Create New Rule
Destination
Address:
Enter the destination IP address of packets that will take this route.
Destination
Subnet Mask:
Enter the destination for this route.
Gateway IP
Address:
Enter your next hop gateway to be taken if this route is used.
Interface:Specify the interface the route will transit.
Metric:The route metric is a value from 0 to 15 that indicates the cost of
using this route.
Click Apply when you are done.
57D-Link DSL-3788 User Manual
Section 4 - Conguration
Dynamic DNS
The Dynamic DNS page is used to Most Internet Service Providers (ISPs) assign
dynamic (changing) IP addresses. Using a dynamic DNS service provider,
people can enter your domain name in their web browser to connect to your
server, no matter what your IP address is. To access this page, click Dynamic
DNS from the Features menu on the bar on the top of the page.
Enable Dynamic
DNS:
Enabling dynamic DNS will reveal further conguration options.
DDNS Server:Select your DDNS server from the drop-down menu.
Username:Enter your dynamic DNS username.
Password:Enter your dynamic DNS password.
Conrm Password:Enter your dynamic DNS password again.
Host Name:Enter the host name that you registered with your dynamic DNS
service provider.
Click Save when you are done.
58D-Link DSL-3788 User Manual
Section 4 - Conguration
IGMP
IGMP Snooping:Enable and disable Internet Group Management Protocol
(IGMP) snooping to build multicast tables.
Wan Proxy:Check the box to enable the Wan proxy on each interface.
IGMP Version:Select the IGMP version to use either V1/V2 or V3.
Click Save when you are done.
The Internet Group Management Protocol (IGMP) Transmission allows for
the transmission of identical content, such as multimedia, from a source to a
number of recipients.
59D-Link DSL-3788 User Manual
Section 4 - Conguration
Management
Time
The Time page allows you to congure, update, and maintain the correct
time for the internal system clock. From here you can set the time zone, the
Network Time Protocol (NTP) server, and enable or disable daylight saving
time. To access this page, click Time & Schedule from the Management
menu on the bar on the top of the page.
Time:Displays the current date and time of the router.
Synchronize time
with:
Select either NTP Server automatically or uncheck to leave blank.
If you selected NTP Server automatically, the following options are available:
Time Zone:Select your time zone from the drop-down menu.
NTP Server
Address/2:
Enter the NTP server address. The default is ntp1.dlink.com. Adding
a second server is optional.
Daylight Saving:Enable or disable daylight saving time.
Time & Schedule
60D-Link DSL-3788 User Manual
Section 4 - Conguration
If you enabled Daylight Saving, the following options are available:
Date Start:Enter the date and time during which daylight saving starts in your
region.
Date End:Enter the date and time during which daylight saving starts in your
region.
Click Save when you are done. To congure and manage the schedule, click
Schedule and refer to Schedule on page 61.
61D-Link DSL-3788 User Manual
Section 4 - Conguration
Schedule
Some conguration rules can be set according to a pre-congured schedule.
To access this page, click Time & Schedule from the Management menu on
the bar on the top of the page and click the Schedule link. To return to the
Time page, click Time.
If you wish to remove a rule, click on its trash can icon in the Delete column. If
you wish to edit a rule, click on its pencil icon in the Edit column. If you wish to
create a new rule, click the Add Rules button. Click Apply when you are done.
If you edit or create a rule, the following options will appear:
First, enter the name of your schedule in the Name eld.
Each box represents one hour, with the time at the top of each column. To add
a time period to the schedule, simply click on the start hour and drag to the
end hour. You can add multiple days to the schedule, but only one period per
day.
To remove a time period from the schedule, click on the cross icon.
Click Apply when you are done.
62D-Link DSL-3788 User Manual
Section 4 - Conguration
Log Info
The router keeps a running log of events. To access this page, click Log Info
from the Management menu on the bar on the top of the page. System
logging must be enabled in order for this feature to work.
Refer to System Log on page 63 for information on how to enable the
system log.
63D-Link DSL-3788 User Manual
Section 4 - Conguration
System Log
This page controls how the System Log operates. This log can be sent to a
Syslog server or saved to your local hard drive. To access this page, click Log
Info from the Management menu on the bar on the top of the page and
then click System Log. To return to the Log Info page, click Log Info.
Save Log File
Save log le to
local Hard Drive:
Click this button to save the log le to your local hard drive.
Clear the Log info:Click this button to clear the system log.
Log Type
Log Enable:Activate or deactivate logging.
Log Level:Select the level of detail to be logged.
Remote Log Setting
Log Enable:Activate or deactivate remote logging.
Remote Log
Server IP:
Enter the IP address for the Syslog server.
Click Save when you are done.
64D-Link DSL-3788 User Manual
Section 4 - Conguration
System Settings
This page allows you to save the router’s current conguration, load a
previously saved conguration, reset the router to its factory default settings,
or reboot the router. To access this page, click System Settings from the
Management menu on the bar on the top of the page.
Device Information
Hardware Version:The hardware version of the router is displayed here.
Firmware Version:The current rmware version is displayed here.
System
Save and Reboot
The Device:
Click to reboot the router.
Restore To Factory
Default Settings:
This option will restore all conguration settings back to the settings that
were in eect at the time the router was shipped from the factory. Any
settings that have not been saved will be lost, including any rules that
you have created. If you want to save the current router conguration
settings, use the Save Settings To Local Hard Drive button below.
Save Settings To
Local Hard Drive:
This option will save the current router conguration settings to a le
on your computer.
Load Settings
From Local Hard
Drive:
This option will load a previously saved router conguration le. This will
overwrite the router’s current conguration.
65D-Link DSL-3788 User Manual
Section 4 - Conguration
Admin
This page will allow you to change the administrator (admin) password and
enable remote management. To access this page, select System from the
Management menu on the bar on the top of the page, and click Admin. To
return to the System page, click System.
Administrator Settings
Password:Enter a new password for the admin account. You will need to enter this
password whenever you congure the router using a web browser.
Conrm Password:Conrm the administrator account password.
Click Save when you are done.
66D-Link DSL-3788 User Manual
Section 4 - Conguration
Firmware Upgrade
This page will allow you to upgrade the router’s rmware. To access this page,
click Firmware Upgrade from the Management menu on the bar on the
top of the page.
To upgrade the rmware, you must rst download the relevant le from
http://support.dlink.com.
Firmware Information
Current Firmware
Version:
The current rmware’s version is displayed.
Firmware Date:The current rmware’s date is displayed.
Upgrade Manually
Upgrade
Firmware:
If you wish to upgrade manually, rst download the rmware le you wish
to upgrade to. Next, click the Select File button and browse to the le
to install the new rmware. Then press Upgrade to begin the upgrade
process. Do not power o the router while the rmware is uploading.
67D-Link DSL-3788 User Manual
Section 4 - Conguration
Statistics
This page gives you various statistics about data transmitted and received
by your router through the Internet, on your wired network (LAN), and
through your wireless networks. To access this page, click Statistics from the
Management menu on the bar on the top of the page.
You can view the statistics of the Internet, LAN, Wi-Fi 2.4 GHz, or Wi-Fi 5
GHz interfaces by clicking on their respective tabs at the top of the graph.
The graph will update every few seconds. The table at the bottom of the page
displays the total number of packets and data sent and received since the
DSL-3788 was booted.
The current amount of trac being sent and received, measured in KByte/sec
is displayed, along with the current number of sessions.
To clear the information on the graph, click Clear.
Note: The trac counter will reset if the device is rebooted.
68D-Link DSL-3788 User Manual
Section 4 - Conguration
Diagnostics
This page is used to test the router's connection to the Internet. To access this
page, click Diagnostics from the Management menu on the bar on the top
of the page.
Enter either an IP address or web address, select either Ping or Tracert test,
and click Run Test.
The results of the test will be displayed in the dialog box. You may copy the
results by pressing the Copy button.
69D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
USB Port
Connect and Share a USB Device
After you have successfully installed and congured your D-Link Modem Router, you are ready to enjoy the benets of D-Link’s
USB sharing technology. This allows you to quickly and easily share a USB storage device with multiple computers on your
network.
Connect and Share a USB Storage Device
The DSL-3788 will share a FAT32 or NTFS-formatted USB storage device using the Samba le sharing protocol. Once connected,
you can copy, move, delete, and edit les over the network like you would with any ordinary drive attached to your computer.
Connect a USB storage device to the USB Port on the DSL-3788.
70D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Connecting from a Windows-Based PC
Step 1 -Click the Start menu and select Computer.
71D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Step 2 -Click Map network drive.
72D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Step 3 -Select the drive letter you wish to map your network drive to. Enter the DSL-3788’s IP address and the name of the
USB volume you wish to share. For example \\192.168.1.1\usb.
Check the boxes Reconnect at logon and Connect using dierent credentials.
Click Finish.
If you have multiple USB storage devices attached via a USB hub, click USB Device from the Home section of the DSL-3788’s
Web Conguration utility for a list of available volume names.
73D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Step 4 -Enter admin and the password to your router and click Ok.
admin
74D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Congratulations! Your les are now shared. Repeat this process from each Windows PC you wish to share your USB drive with.
75D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Connecting from a Mac
Step 1 -While in Finder, click Go menu and select Connect to Server...
76D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Step 2 -Enter the DSL-3788’s IP address and the name of the USB volume you wish to share.
For example smb//192.168.1.1/usb1_1.
Click Connect.
If you have multiple USB storage devices attached via a USB Hub, consult the HOME>USB sectionof the DSL-3788’s Web
Conguration utility for a list of available volume names.
77D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Step 4 -Enter admin and the password to your router and click Connect. If you wish to have your computer remember your
password, check the Remember this password in my keychain box.
admin
78D-Link DSL-3788 User Manual
Section 5 - Connect and Share a USB Device
Congratulations
Your les are now shared. Repeat this process from each Mac you wish to share your USB drive with.
79D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
Connect a Wireless Client to Your Router
WPS Button
Step 2 - Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
The easiest and most secure way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most
wireless devices such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS
button (or a software utility with WPS) that you can press to connect to the DSL-3788 router. Please refer to your user manual
for the wireless device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps
below:
Step 1 - Press the WPS button on the DSL-3788 for about 5 seconds. The WPS LED on the front will start to blink.
Step 3 - Allow up to 1 minute for your connection to be congured. Once the WPS LED stops blinking, you will be connected
and your wireless connection will be secure with WPA2.
WPS Button
80D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
When connecting to the DSL-3788 wirelessly for the rst time, you will need to input the wireless network name (SSID) and
Wi-Fi password (security key) of the device you are connecting to. If your product has a Wi-Fi conguration card, you can
nd the default network name and Wi-Fi password here. Otherwise refer to the product label for the default Wi-Fi network
SSID and password, or enter the Wi-Fi credentials set during the product conguration.
To join an existing network, locate the wireless network icon in the taskbar,
next to the time display and click on it.
Wireless Icon
Clicking on this icon will display a list of wireless networks which are within
range of your computer. Select the desired network by clicking on the SSID.
Windows® 10
81D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
To connect to the SSID, click Connect.
To automatically connect with the router when your device next detects the
SSID, click the Connect Automatically check box.
You will then be prompted to enter the Wi-Fi password (network security key)
for the wireless network. Enter the password into the box and click Next to
connect to the network. Your computer will now automatically connect to this
wireless network when it is detected.
You can also use Wi-Fi Protected Setup (WPS) to connect to the router.
Press the WPS button on your D-Link device and you will be automatically
connected.
82D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
Windows® 8
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring
your wireless adapter. If you are joining an existing network, you will need to know the security key (Wi-Fi password) being
used.
To join an existing network, locate the wireless network icon in the taskbar
next to the time display.
Wireless Icon
Clicking on this icon will display a list of wireless networks that are within
connecting proximity of your computer. Select the desired network by clicking
on the network name.
83D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
You will then be prompted to enter the network security key (Wi-Fi password)
for the wireless network. Enter the password into the box and click Next.
If you wish to use Wi-Fi Protected Setup (WPS) to connect to the router, you
can also press the WPS button on your router during this step to enable the
WPS function.
When you have established a successful connection to a wireless network, the
word Connected will appear next to the name of the network to which you
are connected to.
84D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
Windows® 7
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
1. Click on the wireless icon in your system tray (lower-right corner).
2. The utility will display any available wireless networks in your area.
Wireless Icon
WPA/WPA2
85D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
3. Highlight the wireless connection with Wi-Fi name (SSID) you would
like to connect to and click the Connect button.
If you get a good signal but cannot access the Internet, check your
TCP/IP settings for your wireless adapter. Refer to the Networking
Basics section in this manual for more information.
4. The following window appears while your computer tries to connect
to the router.
86D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
WPS
The WPS feature of the DSL-3788 can be congured using Windows® 7. Carry out the following steps to use Windows® 7 to
congure the WPS feature:
1. Click the Start button and select Computer from the Start menu.
2. Click Network on the left side.
87D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
3. Double-click the DSL-3788.
4. Input the WPS PIN number (on the router label) in the Setup >
Wireless Setup menu in the Router’s Web UI) and click Next.
DSL-3788
88D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
5. Type a name to identify the network.
6. To congure advanced settings, click the icon.
Click Next to continue.
89D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
7. The following window appears while the DSL-3788 is being congured.
Wait for the conguration to complete.
8. The following window informs you that WPS on the DSL-3788 has been set
up successfully.
Make a note of the security key as you may need to provide this security key
if adding an older wireless device to the network in the future.
9. Click Close to complete WPS setup.
90D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
Windows Vista®
Windows Vista® users may use the built-in wireless utility. If you are using another company’s wireless utility, please refer to the
user manual of your wireless adapter for help connecting to a wireless network. Most wireless utilities will have a “site survey”
option similar to the Windows Vista® utility as seen below.
Right-click on the wireless computer icon in your system tray (lower-right
corner next to the time). Select Connect to a network.
If you receive the Wireless Networks Detected bubble, click on the center of
the bubble to access the utility.
or
The utility will display any available wireless networks in your area. Click on a
network (displayed using the SSID) and click the Connect button.
If you get a good signal but cannot access the Internet, check you TCP/IP
settings for your wireless adapter. Refer to the Networking Basics section in
this manual for more information.
91D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
WPA/WPA2
It is recommended that you enable wireless security (WPA/WPA2) on your wireless router or access point before conguring
your wireless adapter. If you are joining an existing network, you will need to know the security key or passphrase being used.
2.Highlight the Wi-Fi name (SSID) you would like to connect to and click
Connect.
1.Open the Windows Vista® Wireless Utility by right-clicking on the wireless
computer icon in your system tray (lower right corner of screen). Select
Connect to a network.
92D-Link DSL-3788 User Manual
Section 6 - Connecting to a Wireless Network
3. Enter the same security key or passphrase (Wi-Fi password) that is on your
router and click Connect.
It may take 20-30 seconds to connect to the wireless network. If the
connection fails, please verify that the security settings are correct. The key or
passphrase must be exactly the same as the one on the wireless router.
93D-Link DSL-3788 User Manual
Section 7 - Troubleshooting
Troubleshooting
This chapter provides solutions to problems that can occur during the installation and operation of the DSL-3788. Read the
following descriptions if you are having problems. The examples below are illustrated in Windows® XP. If you have a dierent
operating system, the screenshots on your computer will look similar to these examples.
1. Why can’t I access the web-based conguration utility?
When entering the IP address of the D-Link router (192.168.1.1 for example), you are not connecting to a website, nor do you
have to be connected to the Internet. The device has the utility built-in to a ROM chip in the device itself. Your computer must
be on the same IP subnet to connect to the web-based utility.
• Make sure you have an updated Java-enabled web browser. We recommend the following:
• Internet Explorer 8 or higher
• EDGE Browser 20 or higher
• Firefox 20 or higher
• Safari 4 or higher
• Chrome 17 or higher
• Verify physical connectivity by checking for solid link lights on the device. If you do not get a solid link light, try using a
dierent cable, or connect to a dierent port on the device if possible. If the computer is turned o, the link light may not be
on.
• Disable any Internet security software running on the computer. Software rewalls such as ZoneAlarm, BlackICE, Sygate,
Norton Personal Firewall, and Windows® XP rewall may block access to the conguration pages. Check the help les
included with your rewall software for more information on disabling or conguring it.
94D-Link DSL-3788 User Manual
Section 7 - Troubleshooting
• Congure your Internet settings:
• Go to Start > Settings > Control Panel. Double-click the Internet Options Icon. From the Security tab, click
the button to restore the settings to their defaults.
• Click the Connection tab and set the dial-up option to Never Dial a Connection. Click the LAN Settings button.
Make sure nothing is checked. Click OK.
• Go to the Advanced tab and click the button to restore these settings to their defaults. Click OK three times.
• Close your web browser (if open) and open it.
• Access the web management. Open your web browser and enter the IP address of your D-Link router in the address bar. This
should open the login page for your web management.
• If you still cannot access the conguration, unplug the power to the router for 10 seconds and plug back in. Wait about 30
seconds and try accessing the conguration. If you have multiple computers, try connecting using a dierent computer.
2. What can I do if I forgot my password?
If you forgot your password, you must reset your router. This process will change all your settings back to the factory defaults.
To reset the router, locate the reset button (hole) on the rear panel of the unit. With the router powered on, use a paperclip
to hold the button down for 10 seconds. Release the button and the router will go through its reboot process. Wait about 30
seconds to access the router. The default IP address is 192.168.1.1. When logging in, enter the device password shown on
device label.
95D-Link DSL-3788 User Manual
Section 7 - Troubleshooting
3. Why can’t I connect to certain sites or send and receive emails when connecting through my router?
If you are having a problem sending or receiving email, or connecting to secure sites such as eBay, banking sites, and Hotmail,
we suggest lowering the MTU in increments of ten (Ex. 1492, 1482, 1472, etc).
To nd the proper MTU Size, you’ll have to do a special ping of the destination you’re trying to go to. A destination could be
another computer, or a URL.
• Click on Start and then click Run.
• Windows® 95, 98, and Me users type in command (Windows® NT, 2000, XP, Vista®, and 7 users type in cmd) and
press Enter (or click OK).
• Once the window opens, you’ll need to do a special ping. Use the following syntax:
ping [url] [-f] [-l] [MTU value]
Example: ping yahoo.com -f -l 1472
96D-Link DSL-3788 User Manual
Section 7 - Troubleshooting
You should start at 1472 and work your way down by 10 each time. Once you get a reply, go up by 2 until you get a
fragmented packet. Take that value and add 28 to the value to account for the various TCP/IP headers. For example, lets say
that 1452 was the proper value, the actual MTU size would be 1480, which is the optimum for the network we’re working with
(1452+28=1480).
Once you nd your MTU, you can now congure your router with the proper MTU size.
To change the MTU rate on your router follow the steps below:
• Open your browser, enter the IP address of your router (192.168.1.1) and click OK.
• Enter your username (admin) and password (default device password is on the device label). Click OK to enter
the web conguration page for the device.
• Click on Settings and then Internet. Choose the Advanced Settings.
• To change the MTU, enter the number in the MTU eld and click Save to save your settings.
• Test your email. If changing the MTU does not resolve the problem, continue changing the MTU in increments
of ten.
97D-Link DSL-3788 User Manual
Appendix A - Wireless Basics
D-Link wireless products are based on industry standards to provide easy-to-use and compatible high-speed wireless
connectivity within your home, business, or public access wireless networks. Strictly adhering to the IEEE standard, the D-Link
wireless family of products will allow you to securely access the data you want, when, and where you want it. You will be able to
enjoy the freedom that wireless networking delivers.
A wireless local area network (WLAN) is a cellular computer network that transmits and receives data with radio signals
instead of wires. Wireless LANs are used increasingly in both home and oce environments, and public areas such as airports,
coee shops and universities. Innovative ways to utilize WLAN technology are helping people work, and communicate more
eciently. Increased mobility and the absence of cabling and other xed infrastructure have proven to be benecial for many
users.
Wireless users can use the same applications they use on a wired network. Wireless adapter cards used on laptop and desktop
systems support the same protocols as Ethernet adapter cards.
Under many circumstances, it may be desirable for mobile network devices to link to a conventional Ethernet LAN in order to
use servers, printers or an Internet connection supplied through the wired LAN. A wireless router is a device used to provide
this link.
Wireless Basics
98D-Link DSL-3788 User Manual
Appendix A - Wireless Basics
What is Wireless?
Wireless or Wi-Fi technology is another way of connecting your computer to the network without using wires. Wi-Fi uses radio
frequency to connect wirelessly so you have the freedom to connect computers anywhere in your home or oce network.
Why D-Link Wireless?
D-Link is the worldwide leader and award winning designer, developer, and manufacturer of networking products.
D-Link delivers the performance you need at a price you can aord. D-Link has all the products you need to build your
network.
How does wireless work?
Wireless works similarly to how cordless phones work, through radio signals that transmit data from one point A to point B. But
wireless technology has restrictions as to how you can access the network. You must be within the wireless network range area
to be able to connect your computer. There are two dierent types of wireless networks: Wireless Local Area Network (WLAN),
and Wireless Personal Area Network (WPAN).
Wireless Local Area Network (WLAN)
In a wireless local area network, a device called an Access Point (AP) connects computers to the network. The access point
has a small antenna attached to it, which allows it to transmit data back and forth over radio signals. With an indoor access
point the signal can travel up to 300 feet. With an outdoor access point the signal can reach out up to 30 miles to serve places
like manufacturing plants, industrial locations, university and high school campuses, airports, golf courses, and many other
outdoor venues.
99D-Link DSL-3788 User Manual
Appendix A - Wireless Basics
Wireless Personal Area Network (WPAN)
Bluetooth is the industry standard wireless technology used for WPAN. Bluetooth devices in WPAN operate in a range up to 30
feet away.
Compared to WLAN the speed and wireless operation range are both less than WLAN, but in return it doesn’t use nearly as
much power. This makes it ideal for personal devices, such as mobile phones, PDAs, headphones, laptops, speakers, and other
devices that operate on batteries.
Who uses wireless?
Wireless technology as become so popular in recent years that almost everyone is using it, whether it’s for home, oce,
business, D-Link has a wireless solution for it.
Home Uses/Benets
• Gives everyone at home broadband access
• Surf the web, check email, instant message, etc.
• Gets rid of the cables around the house
• Simple and easy to use
Small Oce and Home Oce Uses/Benets
• Stay on top of everything at home as you would at oce
• Remotely access your oce network from home
• Share Internet connection and printer with multiple computers
• No need to dedicate oce space
100D-Link DSL-3788 User Manual
Appendix A - Wireless Basics
Where is wireless used?
Wireless technology is expanding everywhere, not just at home or oce. People like the freedom of mobility and it’s becoming
so popular that more and more public facilities now provide wireless access to attract people. The wireless connection in public
places is usually called “hotspots”.
Using a D-Link USB adapter with your laptop, you can access the hotspot to connect to the Internet from remote locations like:
airports, hotels, coee shops, libraries, restaurants, and convention centers.
Wireless network is easy to setup, but if you’re installing it for the rst time it could be quite a task not knowing where to start.
That’s why we’ve put together a few setup steps and tips to help you through the process of setting up a wireless network.
Tips
Here are a few things to keep in mind, when you install a wireless network.
Centralize your router or access point
Make sure you place the router/access point in a centralized location within your network for the best performance. Try to
place the router/access point as high as possible in the room, so the signal gets dispersed throughout your home. If you have a
two-story home, you may need a repeater to boost the signal to extend the range.
Eliminate Interference
Place home appliances such as cordless telephones, microwaves, and televisions as far away as possible from the router/access
point. This would signicantly reduce any interference that the appliances might cause since they operate on same frequency.
101D-Link DSL-3788 User Manual
Appendix A - Wireless Basics
Security
Don’t let your next-door neighbors or intruders connect to your wireless network. Secure your wireless network by turning on
the WPA or WEP security feature on the router. Refer to the product manual for detail information on how to set it up.
There are basically two modes of networking:
• Infrastructure – All wireless clients will connect to an access point or wireless router.
• Ad-hoc – Directly connecting to another computer for peer-to-peer communication using wireless network
adapters on each computer, such as two or more DSL-3788 wireless network USB adapters.
An Infrastructure network contains an access point or wireless router. All the wireless devices, or clients, will connect to the
wireless router or access point.
An Ad-hoc network contains only clients, such as laptops with wireless USB adapters. All the adapters must be in Ad-hoc mode
to communicate.
Wireless Modes
102D-Link DSL-3788 User Manual
Appendix B - Networking Basics
Networking Basics
Check your IP address
After you install your new D-Link adapter, by default, the TCP/IP settings should be set to obtain an IP address from a DHCP
server (i.e. wireless router) automatically. To verify your IP address, please follow the steps below.
Click on Start > Run. In the run box type cmd and click OK. (Windows® 7/Vista® users type cmd in the Start Search box.)
At the prompt, type ipcong and press Enter.
This will display the IP address, subnet mask, and the
default gateway of your adapter.
If the address is 0.0.0.0, check your adapter
installation, security settings, and the settings on
your router. Some rewall software programs may
block a DHCP request on newly installed adapters.
103D-Link DSL-3788 User Manual
Appendix B - Networking Basics
Statically Assign an IP address
If you are not using a DHCP capable gateway/router, or you need to assign a static IP address, please follow the steps below:
Step 1
Windows® 7 - Click on Start > Control Panel > Network and Internet > Network and Sharing Center.
Windows Vista® - Click on Start > Control Panel > Network and Internet > Network and Sharing Center > Manage
Network Connections.
Windows® XP - Click on Start > Control Panel > Network Connections.
Windows® 2000 - From the desktop, right-click My Network Places > Properties.
Step 2
Right-click on the Local Area Connection which represents your network adapter and select Properties.
Step 3
Highlight Internet Protocol (TCP/IP) and click Properties.
Step 4
Click Use the following IP address and enter an IP address that is on the same subnet
as your network or the LAN IP address on your router.
Example: If the router´s LAN IP address is 192.168.1.1, make your IP address 192.168.1.X
where X is a number between 2 and 99. Make sure that the number you choose is not
in use on the network. Set the Default Gateway the same as the LAN IP address of your
router (I.E. 192.168.1.1).
Set Primary DNS the same as the LAN IP address of your router (192.168.1.1). The
Secondary DNS is not needed or you may enter a DNS server from your ISP.
Step 5
Click OK twice to save your settings.
104D-Link DSL-3788 User Manual
Appendix B - Networking Basics
Wireless Security
This section will show you the dierent levels of security you can use to protect your data from intruders. The DSL-3788 oers the
WPA (Wi-Fi Protected Access), is a Wi-Fi standard that was designed to improve the security features of WEP (Wired Equivalent Privacy).
The 2 major improvements over WEP:
• Improved data encryption through the Temporal Key Integrity Protocol (TKIP). TKIP scrambles the keys using a hashing
algorithm and by adding an integrity-checking feature, ensures that the keys haven’t been tampered with. WPA2 is
based on 802.11i and uses Advanced Encryption Standard (AES) instead of TKIP.
• User authentication, which is generally missing in WEP, through the extensible authentication protocol (EAP). WEP
regulates access to a wireless network based on a computer’s hardware-specic MAC address, which is relatively simple
to be snied out and stolen. EAP is built on a more secure public-key encryption system to ensure that only authorized
network users can access the network.
WPA-PSK/WPA2-PSK uses a passphrase or key to authenticate your wireless connection. The key is an alpha-numeric password between
8 and 63 characters long. The password can include symbols (!?*&_) and spaces. This key must be the exact same key entered on your
wireless router or access point.
WPA/WPA2 incorporates user authentication through the Extensible Authentication Protocol (EAP). EAP is built on a more secure public
key encryption system to ensure that only authorized network users can access the network.
105D-Link DSL-3788 User Manual
Appendix C - Technical Specications
Technical Specications
Device Interfaces
• One RJ-11 Broadband port
• 802.11ac/n/g/b Wireless LAN
• One multi-purpose Gigabit LAN/WAN port
• Three Gigabit Ethernet LAN ports
• One USB 2.0 port
Standards
• IEEE 802.11ac/n/g/a/b
• IEEE 802.3/u/az/x
ADSL/ADSL2/ADSL2+ Standards
• G.dmt/G.lite/G.hs/VBR
• ITU-T G.992.5/ G.992.3/ G.992.4
VDSL Standards
• ITU-T G.993.1/ G.993.2
• Prole 8a/8b/8c/8d/12a/12b/17a/30a
Antenna Types
• Two external dual-band antennas
Wireless Signal Rate1
• 2.4 Ghz - 300 Mbps
• 5 Ghz - 866 Mbps
Security
• WPA™- Personal/Enterprise
• WPA2™- Personal/Enterprise
• Wi-Fi Protected Setup (WPS) PIN/PBC
Power
• Input: 100 to 240 V AC, 50/60 Hz
• Output: 12 V DC, 1.5 A
Operating Temperature
• 0 to 45 °C (32 to 113 °F)
Storage Temperature
• -20 to 70 °C (-4 to 158 °F)
Operating Humidity
• 10% to 95% maximum (non-condensing)
Certications
• CE
• LVD
Dimensions
• 210 mm (8.27 inches)
• 150 mm (5.91 inches)
• 30.75 mm (1.21 inches)
Weight
• 277.4 grams (9.78 ounces)
Note:
1 Maximum wireless signal rate derived from IEEE Standard 802.11g, 802.11n, and 802.11ac specications. Actual data throughput will vary. Network conditions and environmental factors, including
volume of network trac, building materials and construction, and network overhead, lower actual data throughput rate. Environmental factors will adversely aect wireless signal range.
• Frequency Range varies depending on country’s regulation.
106D-Link DSL-3788 User Manual106
Appendix D - Regulatory Statements
Frequency Band(s)
Frequenzband
Fréquence bande(s)
Bandas de Frecuencia
Frequenza/e
Frequentie(s)
Max. Output Power (EIRP)
Max. Output Power
Consommation d’énergie max.
Potencia máxima de Salida
Potenza max. Output
Max. Output Power
5 G
5.15 – 5.25 GHz200 mW
5.25 – 5.35 GHz200 mW
5.47 – 5.725 GHz1 W
2.4 G2.4 – 2.4835 GHz100 mW
Regulatory Statements
107D-Link DSL-3788 User Manual107
Appendix D - Regulatory Statements
European Community Declaration of Conformity:
Česky [Czech]
Tímto D-Link Corporation prohlašuje, že tento produkt, jeho příslušenství a software jsou v souladu se směrnicí
2014/53/EU. Celý text ES prohlášení o shodě vydaného EU a o rmwaru produktu lze stáhnout na stránkách k
produktu www.dlink.com.
Dansk [Danish]
D-Link Corporation erklærer herved, at dette produkt, tilbehør og software er i overensstemmelse med direktiv
2014/53/EU. Den fulde tekst i EU-overensstemmelseserklæringen og produktrmware kan wnloades fra
produktsiden hos www.dlink.com.
Deutsch [German]
Hiermit erklärt die D-Link Corporation, dass dieses Produkt, das Zubehör und die Software der Richtlinie 2014/53/
EU entsprechen. Der vollständige Text der Konformitätserklärung der Europäischen Gemeinschaft sowie die
Firmware zum Produkt stehen Ihnen zum Herunterladen von der Produktseite im Internet auf www.dlink.com zur
Verfügung.
Eesti [Estonian]
Käesolevaga kinnitab D-Link Corporation, et see toode, tarvikud ja tarkvara on kooskõlas direktiiviga 2014/53/EL.
Euroopa Liidu vastavusdeklaratsiooni täistekst ja toote püsivara on allalaadimiseks saadaval tootelehel www.dlink.
com.
English
Hereby, D-Link Corporation, declares that this product, accessories, and software are in compliance with directive
2014/53/EU. The full text of the EU Declaration of Conformity and product rmware are available for download
from the product page at www.dlink.com
Español [Spanish]
Por la presente, D-Link Corporation declara que este producto, accesorios y software cumplen con las directivas
2014/53/UE. El texto completo de la declaración de conformidad de la UE y el rmware del producto están
disponibles y se pueden descargar desde la página del producto en www.dlink.com.
Ελληνική [Greek]
Με την παρούσα, η D-Link Corporation δηλώνει ότι αυτό το προϊόν, τα αξεσουάρ και το λογισμικό
συμμορφώνονται με την Οδηγία 2014/53/ΕΕ. Το πλήρες κείμενο της δήλωσης συμμόρφωσης της ΕΕ και το
υλικολογισμικό του προϊόντος είναι διαθέσιμα για λήψη από τη σελίδα του προϊόντος στην τοποθεσία www.dlink.
com.
Français [French]
Par les présentes, D-Link Corporation déclare que ce produit, ces accessoires et ce logiciel sont conformes aux
directives 2014/53/UE.Le texte complet de la déclaration de conformité de l'UE et le icroprogramme du produit
sont disponibles au téléchargement sur la page des produits à www.dlink.com.
Italiano [Italian]
Con la presente, D-Link Corporation dichiara che questo prodotto, i relativi accessori e il software sono conformi
alla direttiva 2014/53/UE. Il testo completo della dichiarazione di conformità UE e il rmware del prodotto sono
disponibili per il download dalla pagina del prodotto su www.dlink.com.
108D-Link DSL-3788 User Manual108
Appendix D - Regulatory Statements
Latviski [Latvian]
Ar šo uzņēmums D-Link Corporation apliecina, ka šis produkts, piederumi un programmatūra atbilst direktīvai
2014/53/ES. ES atbilstības deklarācijas pilno tekstu un produkta aparātprogrammatūru var lejupielādēt attiecīgā
produkta lapā vietnē www.dlink.com.
Lietuvių [Lithuanian]
Šiuo dokumentu „D-Link Corporation“ pareiškia, kad šis gaminys, priedai ir programinė įranga atitinka direktyvą
2014/53/ES. Visą ES atitikties deklaracijos tekstą ir gaminio programinę aparatinę įrangą galima atsisiųsti iš gaminio
puslapio adresu www.dlink.com.
Nederlands [Dutch]
Hierbij verklaart D-Link Corporation dat dit product, accessoires en software voldoen aan de richtlijnen 2014/53/
EU. De volledige tekst van de EU conformiteitsverklaring en productrmware is beschikbaar voor download van de
productpagina op www.dlink.com.
Malti [Maltese]
Bil-preżenti, D-Link Corporation tiddikjara li dan il-prodott, l-aċċessorji, u s-software huma konformi mad-Direttiva
2014/53/UE. Tista’ tniżżel it-test sħiħ tad-dikjarazzjoni ta’ konformità tal-UE u l-rmware tal-prodott mill-paġna tal-
prodott fuq www.dlink.com.
Magyar [Hungarian]
Ezennel a D-Link Corporation kijelenti, hogy a jelen termék, annak tartozékai és szoftvere megfelelnek a 2014/53/
EU sz. rendeletek rendelkezéseinek. Az EU Megfelelőségi nyilatkozat teljes szövege és a termék rmware a termék
oldaláról tölthető le a www.dlink.com címen.
Polski [Polish]
D-Link Corporation niniejszym oświadcza, że ten produkt, akcesoria oraz oprogramowanie są zgodne z
dyrektywami 2014/53/EU. Pełen tekst deklaracji zgodności UE oraz oprogramowanie sprzętowe do produktu
można pobrać na stronie produktu w witrynie www.dlink.com.
Português [Portuguese]Desta forma, a D-Link Corporation declara que este produto, os acessórios e o software estão em conformidade
com a diretiva 2014/53/UE. O texto completo da declaração de conformidade da UE e do rmware
Slovensko[Slovenian]
Podjetje D-Link Corporation s tem izjavlja, da so ta izdelek, dodatna oprema in programnska oprema skladni z
direktivami 2014/53/EU. Celotno besedilo izjave o skladnosti EU in vdelana programska oprema sta na voljo za
prenos na strani izdelka na www.dlink.com.
Slovensky [Slovak]
Spoločnosť D-Link týmto vyhlasuje, že tento produkt, príslušenstvo a softvér sú v súlade so smernicou 214/53/
EÚ. Úplné znenie vyhlásenia EÚ o zhode a rmvéri produktu sú k dispozícii na prevzatie zo stránky produktu www.
dlink.com.
Suomi [Finnish]
D-Link Corporation täten vakuuttaa, että tämä tuote, lisävarusteet ja ohjelmisto ovat direktiivin 2014/53/EU
vaatimusten mukaisia. Täydellinen EU-vaatimustenmukaisuusvakuutus samoin kuin tuotteen laiteohjelmisto ovat
ladattavissa osoitteesta www.dlink.com.
Svenska[Swedish]
D-Link Corporation försäkrar härmed att denna produkt, tillbehör och programvara överensstämmer med
direktiv 2014/53/EU. Hela texten med EU-försäkran om överensstämmelse och produkt-rmware kan hämtas från
produktsidan på www.dlink.com.
109D-Link DSL-3788 User Manual109
Appendix D - Regulatory Statements
Íslenska [Icelandic]
Hér með lýsir D-Link Corporation því yr að þessi vara, fylgihlutir og hugbúnaður eru í samræmi við tilskipun
2014/53/EB. Sækja má ESB-samræmisyrlýsinguna í heild sinni og fastbúnað vörunnar af vefsíðu vörunnar á www.
dlink.com.
Norsk [Norwegian]
Herved erklærer D-Link Corporation at dette produktet, tilbehøret og programvaren er i samsvar med direktivet
2014/53/EU. Den fullstendige teksten i EU-erklæring om samsvar og produktets fastvare er tilgjengelig for
nedlasting fra produktsiden på www.dlink.com.
Warning Statement:
The power outlet should be near the device and easily accessible.
110D-Link DSL-3788 User Manual110
Appendix D - Regulatory Statements
NOTICE OF WIRELESS RADIO LAN USAGE IN THE EUROPEAN COMMUNITY FOR WIRELESS PRODUCT ONLY:
• This device is restricted to indoor use when operated in the European Community using channels in the 5.15-5.35 GHz band to reduce the
potential for interference.
• This device is a 2.4 GHz wideband transmission system (transceiver), intended for use in all EU member states and EFTA countries. This
equipment may be operated in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK, ES,
CI, HU, and CY.
Usage Notes:
• To remain in conformance with European National spectrum usage regulations, frequency and channel limitations will be applied on the
products according to the country where the equipment will be deployed.
• This device is restricted from functioning in Ad-hoc mode while operating in 5 GHz. Ad-hoc mode is direct peer-to-peer communication
between two client devices without an Access Point.
• Access points will support DFS (Dynamic Frequency Selection) and TPC (Transmit Power Control) functionality as required when operating in
5 GHz band within the EU.
• Please refer to the product manual or datasheet to check whether your product uses 2.4 GHz and/or 5 GHz wireless.
HINWEIS ZUR VERWENDUNG VON DRAHTLOS-NETZWERK (WLAN) IN DER EUROPÄISCHEN GEMEINSCHAFT ( NUR FÜR
EIN DRAHTLOSES PRODUKT )
• Der Betrieb dieses Geräts in der Europäischen Gemeinschaft bei Nutzung von Kanälen im 5,15-5,35 GHz Frequenzband ist ausschließlich auf
Innenräume beschränkt, um das Interferenzpotential zu reduzieren.
• Bei diesem Gerät handelt es sich um ein zum Einsatz in allen EU-Mitgliedsstaaten und in EFTA-Ländern - ausgenommen Frankreich. Der
Betrieb dieses Geräts ist in den folgenden Ländern erlaubt: AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT,
PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Gebrauchshinweise:
• Um den in Europa geltenden nationalen Vorschriften zum Nutzen des Funkspektrums weiterhin zu entsprechen, werden Frequenz und
Kanalbeschränkungen, dem jeweiligen Land, in dem das Gerät zum Einsatz kommt, entsprechend, auf die Produkte angewandt.
• Die Funktionalität im Ad-hoc-Modus bei Betrieb auf 5 GHz ist für dieses Gerät eingeschränkt. Bei dem Ad-hoc-Modus handelt es sich um eine
Peer-to-Peer-Kommunikation zwischen zwei Client-Geräten ohneeinen Access Point.
• Access Points unterstützen die Funktionen DFS (Dynamic Frequency Selection) und TPC (Transmit Power Control) wie erforderlich bei Betrieb
auf 5 GHz innerhalb der EU.
• Bitte schlagen Sie im Handbuch oder Datenblatt nach nach, ob Ihr Gerät eine 2,4 GHz und / oder 5 GHz Verbindung nutzt.
111D-Link DSL-3788 User Manual111
Appendix D - Regulatory Statements
AVIS CONCERNANT L'UTILISATION DE LA RADIO SANS FIL LAN DANS LA COMMUNAUTÉ EUROPÉENNE (UNIQUEMENT
POUR LES PRODUITS SANS FIL)
• Cet appareil est limité à un usage intérieur lorsqu'il est utilisé dans la Communauté européenne sur les canaux de la bande de 5,15 à 5,35 GHz
an de réduire les risques d'interférences.
• Cet appareil est un système de transmission à large bande (émetteur-récepteur) de 2,4 GHz, destiné à être utilisé dans tous les États-
membres de l'UE et les pays de l'AELE. Cet équipement peut être utilisé dans les pays suivants : AL, AD, BE , BG, DK, DE, FI, FR, GR, GW, IS, IT,
• Pour rester en conformité avec la réglementation nationale européenne en matière d'utilisation du spectre, des limites de fréquence et de
canal seront appliquées aux produits selon le pays où l'équipement sera déployé.
• Cet appareil ne peut pas utiliser le mode Ad-hoc lorsqu'il fonctionne dans la bande de 5 GHz. Le mode Adhoc fournit une communication
directe pair à pair entre deux périphériques clients sans point d'accès.
• Les points d'accès prendront en charge les fonctionnalités DFS (Dynamic Frequency Selection) et TPC (Transmit Power Control) au besoin lors
du fonctionnement dans la bande de 5 GHz au sein de l'UE.
• Merci de vous référer au guide d'utilisation ou de la che technique an de vérier si votre produit utilise 2.4 GHz et/ou 5 GHz sans l.
AVISO DE USO DE LA LAN DE RADIO INALÁMBRICA EN LA COMUNIDAD EUROPEA (SOLO PARA EL PRODUCTO
INALÁMBRICO)
• El uso de este dispositivo está restringido a interiores cuando funciona en la Comunidad Europea utilizando canales en la banda de 5,15-5,35
GHz, para reducir la posibilidad de interferencias.
• Este dispositivo es un sistema de transmisión (transceptor) de banda ancha de 2,4 GHz, pensado para su uso en todos los estados miembros
de la UE y en los países de la AELC. Este equipo se puede utilizar en AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL,
NO, AT, PL, PT, RO, SM, SE, RS, SK, ES, CI, HU, CY
Notas de uso:
• Para seguir cumpliendo las normas europeas de uso del espectro nacional, se aplicarán limitaciones de frecuencia y canal en los productos
en función del país en el que se pondrá en funcionamiento el equipo.
• Este dispositivo tiene restringido el funcionamiento en modo Ad-hoc mientras funcione a 5 GHz. El modo Ad-hoc es la comunicación directa
de igual a igual entre dos dispositivos cliente sin un punto de acceso.
• Los puntos de acceso admitirán la funcionalidad DFS (Selección de frecuencia dinámica) y TPC (Control de la potencia de transmisión) si es
necesario cuando funcionan a 5 GHz dentro de la UE.
• Por favor compruebe el manual o la cha de producto para comprobar si el producto utiliza las bandas inalámbricas de 2.4 GHz y/o la de 5
GHz.
112D-Link DSL-3788 User Manual112
Appendix D - Regulatory Statements
AVVISO PER L’USO DI LAN RADIO WIRELESS NELLA COMUNITÀ EUROPEA (SOLO PER PRODOTTI WIRELESS)
• Nella Comunità europea, l’uso di questo dispositivo è limitato esclusivamente agli ambienti interni sui canali compresi nella banda da 5,15 a
5,35 GHz al ne di ridurre potenziali interferenze. Questo dispositivo è un sistema di trasmissione a banda larga a 2,4 GHz (ricetrasmittente),
destinato all’uso in tutti gli stati membri dell’Unione europea e nei paesi EFTA.
• Questo dispositivo può essere utilizzato in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM,
SE, RS, SK, ES, CI, HU, CY
Note per l’uso
• Al ne di mantenere la conformità alle normative nazionali europee per l’uso dello spettro di frequenze, saranno applicate limitazioni sulle
frequenze e sui canali per il prodotto in conformità alle normative del paese in cui il dispositivo viene utilizzato.
• Questo dispositivo non può essere attivato in modalità Ad-hoc durante il funzionamento a 5 GHz. La modalità Ad-hoc è una comunicazione
diretta peer-to-peer fra due dispositivi client senza un punto di accesso.
• I punti di accesso supportano le funzionalità DFS (Dynamic Frequency Selection) e TPC (Transmit Power Control) richieste per operare a 5
GHz nell’Unione europea.
• Ti invitiamo a fare riferimento al manuale del prodotto o alla scheda tecnica per vericare se il tuo prodotto utilizza le frequenze 2,4 GHz e/o
5 GHz.
KENNISGEVING VAN DRAADLOOS RADIO LAN-GEBRUIK IN DE EUROPESE GEMEENSCHAP (ALLEEN VOOR
DRAADLOOS PRODUCT)
• Dit toestel is beperkt tot gebruik binnenshuis wanneer het wordt gebruikt in de Europese Gemeenschap gebruik makend van kanalen in de
5.15-5.35 GHz band om de kans op interferentie te beperken.
• Dit toestel is een 2.4 GHz breedband transmissiesysteem (transceiver) dat bedoeld is voor gebruik in alle EU lidstaten en EFTA landen. Deze
uitrusting mag gebruikt worden in AL, AD, BE, BG, DK, DE, FI, FR, GR, GW, IS, IT, HR, LI, LU, MT, MK, MD, MC, NL, NO, AT, PL, PT, RO, SM, SE, RS, SK,
ES, CI, HU, CY
Gebruiksaanwijzingen:
• Om de gebruiksvoorschriften van het Europese Nationale spectrum na te leven, zullen frequentie- en kanaalbeperkingen worden toegepast
op de producten volgens het land waar de uitrusting gebruikt zal worden.
• Dit toestel kan niet functioneren in Ad-hoc mode wanneer het gebruikt wordt in 5 GHz. Ad-hoc mode is directe peer-to-peer communicatie
tussen twee klantenapparaten zonder een toegangspunt.
• Toegangspunten ondersteunen DFS (Dynamic Frequency Selection) en TPC (Transmit Power Control) functionaliteit zoals vereist bij gebruik
in 5 GHz binnen de EU.
• Raadpleeg de handleiding of de datasheet om te controleren of uw product gebruik maakt van 2.4 GHz en/of 5 GHz.
113D-Link DSL-3788 User Manual113
Appendix D - Regulatory Statements
SAFETY INSTRUCTIONS
The following general safety guidelines are provided to help ensure your own personal safety and protect your product from potential damage.
Remember to consult the product user instructions for more details.
• Static electricity can be harmful to electronic components. Discharge static electricity from your body (i.e. touching grounded bare metal)
before touching the product.
• Do not attempt to service the product and never disassemble the product. For some products with a user replaceable battery, please read
and follow the instructions in the user manual.
• Do not spill food or liquid on your product and never push any objects into the openings of your product.
• Do not use this product near water, areas with high humidity, or condensation unless the product is specically rated for outdoor application.
• Keep the product away from radiators and other heat sources.
• Always unplug the product from mains power before cleaning and use a dry lint free cloth only.
SICHERHEITSVORSCHRIFTEN
Die folgenden allgemeinen Sicherheitsvorschriften dienen als Hilfe zur Gewährleistung Ihrer eigenen Sicherheit und zum Schutz Ihres Produkts.
Weitere Details nden Sie in den Benutzeranleitungen zum Produkt.
• Statische Elektrizität kann elektronischen Komponenten schaden. Um Schäden durch statische Auadung zu vermeiden, leiten Sie
elektrostatische Ladungen von Ihrem Körper ab,
(z. B. durch Berühren eines geerdeten blanken Metallteils), bevor Sie das Produkt berühren.
• Unterlassen Sie jeden Versuch, das Produkt zu warten, und versuchen Sie nicht, es in seine Bestandteile zu zerlegen. Für einige Produkte mit
austauschbaren Akkus lesen Sie bitte das Benutzerhandbuch und befolgen Sie die dort beschriebenen Anleitungen.
• Vermeiden Sie, dass Speisen oder Flüssigkeiten auf Ihr Produkt gelangen, und stecken Sie keine Gegenstände in die Gehäuseschlitze oder
-önungen Ihres Produkts.
• Verwenden Sie dieses Produkt nicht in unmittelbarer Nähe von Wasser und nicht in Bereichen mit hoher Luftfeuchtigkeit oder Kondensation,
es sei denn, es ist speziell zur Nutzung in Außenbereichen vorgesehen und eingestuft.
• Halten Sie das Produkt von Heizkörpern und anderen Quellen fern, die Wärme erzeugen.
• Trennen Sie das Produkt immer von der Stromzufuhr, bevor Sie es reinigen und verwenden Sie dazu ausschließlich ein trockenes fusselfreies
Tuch.
114D-Link DSL-3788 User Manual114
Appendix D - Regulatory Statements
CONSIGNES DE SÉCURITÉ
Les consignes générales de sécurité ci-après sont fournies an d’assurer votre sécurité personnelle et de protéger le produit d’éventuels
dommages. Veuillez consulter les consignes d’utilisation du produit pour plus de détails.
• L’électricité statique peut endommager les composants électroniques. Déchargez l’électricité statique de votre corps (en touchant un objet
en métal relié à la terre par exemple) avant de toucher le produit.
• N’essayez pas d’intervenir sur le produit et ne le démontez jamais. Pour certains produits contenant une batterie remplaçable par l’utilisateur,
veuillez lire et suivre les consignes contenues dans le manuel d’utilisation.
• Ne renversez pas d’aliments ou de liquide sur le produit et n’insérez jamais d’objets dans les orices.
• N’utilisez pas ce produit à proximité d’un point d’eau, de zones très humides ou de condensation sauf si le produit a été spéciquement
conçu pour une application extérieure.
• Éloignez le produit des radiateurs et autres sources de chaleur.
• Débranchez toujours le produit de l’alimentation avant de le nettoyer et utilisez uniquement un chion sec non pelucheux.
INSTRUCCIONES DE SEGURIDAD
Las siguientes directrices de seguridad general se facilitan para ayudarle a garantizar su propia seguridad personal y para proteger el producto
frente a posibles daños. No olvide consultar las instrucciones del usuario del producto para obtener más información.
• La electricidad estática puede resultar nociva para los componentes electrónicos. Descargue la electricidad estática de su cuerpo (p. ej.,
tocando algún metal sin revestimiento conectado a tierra) antes de tocar el producto.
• No intente realizar el mantenimiento del producto ni lo desmonte nunca. Para algunos productos con batería reemplazable por el usuario,
lea y siga las instrucciones del manual de usuario.
• No derrame comida o líquidos sobre el producto y nunca deje que caigan objetos en las aberturas del mismo.
• No utilice este producto cerca del agua, en zonas con humedad o condensación elevadas a menos que el producto esté clasicado
especícamente para aplicación en exteriores.
• Mantenga el producto alejado de los radiadores y de otras fuentes de calor.
• Desenchufe siempre el producto de la alimentación de red antes de limpiarlo y utilice solo un paño seco sin pelusa
115D-Link DSL-3788 User Manual115
Appendix D - Regulatory Statements
ISTRUZIONI PER LA SICUREZZA
Le seguenti linee guida sulla sicurezza sono fornite per contribuire a garantire la sicurezza personale degli utenti e a proteggere il prodotto da
potenziali danni. Per maggiori dettagli, consultare le istruzioni per l’utente del prodotto.
• L’elettricità statica può essere pericolosa per i componenti elettronici. Scaricare l’elettricità statica dal corpo (ad esempio toccando una parte
metallica collegata a terra) prima di toccare il prodotto.
• Non cercare di riparare il prodotto e non smontarlo mai. Per alcuni prodotti dotati di batteria sostituibile dall’utente, leggere e seguire le
istruzioni riportate nel manuale dell’utente.
• Non versare cibi o liquidi sul prodotto e non spingere mai alcun oggetto nelle aperture del prodotto.
• Non usare questo prodotto vicino all’acqua, in aree con elevato grado di umidità o soggette a condensa a meno che il prodotto non sia
specicatamente approvato per uso in ambienti esterni.
• Tenere il prodotto lontano da caloriferi e altre fonti di calore.
• Scollegare sempre il prodotto dalla presa elettrica prima di pulirlo e usare solo un panno asciutto che non lasci lacce.
VEILIGHEIDSINFORMATIE
De volgende algemene veiligheidsinformatie werd verstrekt om uw eigen persoonlijke veiligheid te waarborgen en uw product te beschermen
tegen mogelijke schade. Denk eraan om de gebruikersinstructies van het product te raadplegen voor meer informatie.
• Statische elektriciteit kan schadelijk zijn voor elektronische componenten. Ontlaad de statische elektriciteit van uw lichaam (d.w.z. het
aanraken van geaard bloot metaal) voordat uhet product aanraakt.
• U mag nooit proberen het product te onderhouden en u mag het product nooit demonteren. Voor sommige producten met door de
gebruiker te vervangen batterij, dient u de instructies in de gebruikershandleiding te lezen en te volgen.
• Mors geen voedsel of vloeistof op uw product en u mag nooit voorwerpen in de openingen van uw product duwen.
• Gebruik dit product niet in de buurt van water, gebieden met hoge vochtigheid of condensatie, tenzij het product speciek geclassiceerd is
voor gebruik buitenshuis.
• Houd het product uit de buurt van radiators en andere warmtebronnen.
• U dient het product steeds los te koppelen van de stroom voordat u het reinigt en gebruik uitsluitend een droge pluisvrije doek
116D-Link DSL-3788 User Manual116
Appendix D - Regulatory Statements
Disposing and Recycling Your Product
ENGLISH EN
This symbol on the product or packaging means that according to local laws and regulations this product should be not be disposed
of in household waste but sent for recycling. Please take it to a collection point designated by your local authorities once it has
reached the end of its life, some will accept products for free. By recycling the product and its packaging in this manner you help to
conserve the environment and protect human health.
D-Link and the Environment
At D-Link, we understand and are committed to reducing any impact our operations and products may have on the environment. To minimise
this impact D-Link designs and builds its products to be as environmentally friendly as possible, by using recyclable, low toxic materials in both
products and packaging.
D-Link recommends that you always switch o or unplug your D-Link products when they are not in use. By doing so you will help to save energy
and reduce CO2 emissions.
To learn more about our environmentally responsible products and packaging please visit www.dlinkgreen.com.
DEUTSCH DE
Dieses Symbol auf dem Produkt oder der Verpackung weist darauf hin, dass dieses Produkt gemäß bestehender örtlicher Gesetze
und Vorschriften nicht über den normalen Hausmüll entsorgt werden sollte, sondern einer Wiederverwertung zuzuführen ist. Bringen
Sie es bitte zu einer von Ihrer Kommunalbehörde entsprechend amtlich ausgewiesenen Sammelstelle, sobald das Produkt das Ende
seiner Nutzungsdauer erreicht hat. Für die Annahme solcher Produkte erheben einige dieser Stellen keine Gebühren. Durch ein auf
diese Weise durchgeführtes Recycling des Produkts und seiner Verpackung helfen Sie, die Umwelt zu schonen und die menschliche
Gesundheit zu schützen.
D-Link und die Umwelt
D-Link ist sich den möglichen Auswirkungen seiner Geschäftstätigkeiten und seiner Produkte auf die Umwelt bewusst und fühlt sich verpichtet,
diese entsprechend zu mindern. Zu diesem Zweck entwickelt und stellt D-Link seine Produkte mit dem Ziel größtmöglicher Umweltfreundlichkeit
her und verwendet wiederverwertbare, schadstoarme Materialien bei Produktherstellung und Verpackung.
D-Link empehlt, Ihre Produkte von D-Link, wenn nicht in Gebrauch, immer auszuschalten oder vom Netz zu nehmen. Auf diese Weise helfen
Sie, Energie zu sparen und CO2-Emissionen zu reduzieren.
Wenn Sie mehr über unsere umweltgerechten Produkte und Verpackungen wissen möchten, nden Sie entsprechende Informationen im Internet
unter www.dlinkgreen.com.
117D-Link DSL-3788 User Manual117
Appendix D - Regulatory Statements
FRANÇAIS FR
Ce symbole apposé sur le produit ou son emballage signie que, conformément aux lois et règlementations locales, ce produit ne
doit pas être éliminé avec les déchets domestiques mais recyclé. Veuillez le rapporter à un point de collecte prévu à cet eet par les
autorités locales; certains accepteront vos produits gratuitement. En recyclant le produit et son emballage de cette manière, vous
aidez à préserver l’environnement et à protéger la santé de l’homme.
D-Link et l’environnement
Chez D-Link, nous sommes conscients de l'impact de nos opérations et produits sur l'environnement et nous engageons à le réduire. Pour limiter
cet impact, D-Link conçoit et fabrique ses produits de manière aussi écologique que possible, en utilisant des matériaux recyclables et faiblement
toxiques, tant dans ses produits que ses emballages.
D-Link recommande de toujours éteindre ou débrancher vos produits D-Link lorsque vous ne les utilisez pas. Vous réaliserez ainsi des économies
d’énergie et réduirez vos émissions de CO2.
Pour en savoir plus sur les produits et emballages respectueux de l’environnement, veuillez consulter le www.dlinkgreen.com.
ESPAÑOL ES
Este símbolo en el producto o el embalaje signica que, de acuerdo con la legislación y la normativa local, este producto no se debe
desechar en la basura doméstica sino que se debe reciclar. Llévelo a un punto de recogida designado por las autoridades locales una
vez que ha llegado al n de su vida útil; algunos de ellos aceptan recogerlos de forma gratuita. Al reciclar el producto y su embalaje
de esta forma, contribuye a preservar el medio ambiente y a proteger la salud de los seres humanos.
D-Link y el medio ambiente
En D-Link, comprendemos y estamos comprometidos con la reducción del impacto que puedan tener nuestras actividades y nuestros productos
en el medio ambiente. Para reducir este impacto, D-Link diseña y fabrica sus productos para que sean lo más ecológicos posible, utilizando
materiales reciclables y de baja toxicidad tanto en los productos como en el embalaje.
D-Link recomienda apagar o desenchufar los productos D-Link cuando no se estén utilizando. Al hacerlo, contribuirá a ahorrar energía y a reducir
las emisiones de CO2.
Para obtener más información acerca de nuestros productos y embalajes ecológicos, visite el sitio www.dlinkgreen.com.
118D-Link DSL-3788 User Manual118
Appendix D - Regulatory Statements
ITALIANO IT
La presenza di questo simbolo sul prodotto o sulla confezione del prodotto indica che, in conformità alle leggi e alle normative locali,
questo prodotto non deve essere smaltito nei riuti domestici, ma avviato al riciclo. Una volta terminato il ciclo di vita utile, portare il
prodotto presso un punto di raccolta indicato dalle autorità locali. Alcuni questi punti di raccolta accettano gratuitamente i prodotti
da riciclare. Scegliendo di riciclare il prodotto e il relativo imballaggio, si contribuirà a preservare l'ambiente e a salvaguardare la
salute umana.
D-Link e l'ambiente
D-Link cerca da sempre di ridurre l'impatto ambientale dei propri stabilimenti e dei propri prodotti. Allo scopo di ridurre al minimo tale impatto,
D-Link progetta e realizza i propri prodotti in modo che rispettino il più possibile l'ambiente, utilizzando materiali riciclabili a basso tasso di
tossicità sia per i prodotti che per gli imballaggi.
D-Link raccomanda di spegnere sempre i prodotti D-Link o di scollegarne la spina quando non vengono utilizzati. In questo modo si contribuirà
a risparmiare energia e a ridurre le emissioni di anidride carbonica.
Per ulteriori informazioni sui prodotti e sugli imballaggi D-Link a ridotto impatto ambientale, visitate il sito all'indirizzo www.dlinkgreen.com.
NEDERLANDS NL
Dit symbool op het product of de verpakking betekent dat dit product volgens de plaatselijke wetgeving niet mag worden weggegooid
met het huishoudelijk afval, maar voor recyclage moeten worden ingeleverd. Zodra het product het einde van de levensduur heeft
bereikt, dient u het naar een inzamelpunt te brengen dat hiertoe werd aangeduid door uw plaatselijke autoriteiten, sommige
autoriteiten accepteren producten zonder dat u hiervoor dient te betalen. Door het product en de verpakking op deze manier te
recyclen helpt u het milieu en de gezondheid van de mens te beschermen.
D-Link en het milieu
Bij D-Link spannen we ons in om de impact van onze handelingen en producten op het milieu te beperken. Om deze impact te beperken, ontwerpt
en bouwt D-Link zijn producten zo milieuvriendelijk mogelijk, door het gebruik van recycleerbare producten met lage toxiciteit in product en
verpakking.
D-Link raadt aan om steeds uw D-Link producten uit te schakelen of uit de stekker te halen wanneer u ze niet gebruikt. Door dit te doen bespaart
u energie en beperkt u de CO2-emissies.
Breng een bezoek aan www.dlinkgreen.com voor meer informatie over onze milieuverantwoorde producten en verpakkingen.
119D-Link DSL-3788 User Manual119
Appendix D - Regulatory Statements
POLSKI PL
Ten symbol umieszczony na produkcie lub opakowaniu oznacza, że zgodnie z miejscowym prawem i lokalnymi przepisami
niniejszego produktu nie wolno wyrzucać jak odpady czy śmieci z gospodarstwa domowego, lecz należy go poddać procesowi
recyklingu. Po zakończeniu użytkowania produktu, niektóre odpowiednie do tego celu podmioty przyjmą takie produkty
nieodpłatnie, dlatego prosimy dostarczyć go do punktu zbiórki wskazanego przez lokalne władze. Poprzez proces recyklingu i
dzięki takiemu postępowaniu z produktem oraz jego opakowaniem, pomogą Państwo chronić środowisko naturalne i dbać o
ludzkie zdrowie.
D-Link i środowisko
D-Link podchodzimy w sposób świadomy do ochrony otoczenia oraz jesteśmy zaangażowani w zmniejszanie wpływu naszych działań i produktów
na środowisko naturalne. W celu zminimalizowania takiego wpływu rma D-Link konstruuje i wytwarza swoje produkty w taki sposób, aby były
one jak najbardziej przyjazne środowisku, stosując do tych celów materiały nadające się do powtórnego wykorzystania, charakteryzujące się
małą toksycznością zarówno w przypadku samych produktów jak i opakowań.
Firma D-Link zaleca, aby Państwo zawsze prawidłowo wyłączali z użytku swoje produkty D-Link, gdy nie są one wykorzystywane. Postępując w
ten sposób pozwalają Państwo oszczędzać energię i zmniejszać emisje CO2.
Aby dowiedzieć się więcej na temat produktów i opakowań mających wpływ na środowisko prosimy zapoznać się ze stroną Internetową www.
dlinkgreen.com.
ČESKY CZ
Tento symbol na výrobku nebo jeho obalu znamená, že podle místně platných předpisů se výrobek nesmí vyhazovat do komunálního
odpadu, ale odeslat k recyklaci. Až výrobek doslouží, odneste jej prosím na sběrné místo určené místními úřady k tomuto účelu.
Některá sběrná místa přijímají výrobky zdarma. Recyklací výrobku i obalu pomáháte chránit životní prostředí i lidské zdraví.
D-Link a životní prostředí
Ve společnosti D-Link jsme si vědomi vlivu našich provozů a výrobků na životní prostředí a snažíme se o minimalizaci těchto vlivů. Proto své
výrobky navrhujeme a vyrábíme tak, aby byly co nejekologičtější, a ve výrobcích i obalech používáme recyklovatelné a nízkotoxické materiály.
Společnost D-Link doporučuje, abyste své výrobky značky D-Link vypnuli nebo vytáhli ze zásuvky vždy, když je nepoužíváte. Pomůžete tak šetřit
energii a snížit emise CO2.
Více informací o našich ekologických výrobcích a obalech najdete na adrese www.dlinkgreen.com.
120D-Link DSL-3788 User Manual120
Appendix D - Regulatory Statements
MAGYAR HU
Ez a szimbólum a terméken vagy a csomagoláson azt jelenti, hogy a helyi törvényeknek és szabályoknak megfelelően ez a termék
nem semmisíthető meg a háztartási hulladékkal együtt, hanem újrahasznosításra kell küldeni. Kérjük, hogy a termék élettartamának
elteltét követően vigye azt a helyi hatóság által kijelölt gyűjtőhelyre. A termékek egyes helyeken ingyen elhelyezhetők. A termék és
a csomagolás újrahasznosításával segíti védeni a környezetet és az emberek egészségét.
A D-Link és a környezet
A D-Linknél megértjük és elkötelezettek vagyunk a műveleteink és termékeink környezetre gyakorolt hatásainak csökkentésére. Az ezen hatás
csökkentése érdekében a D-Link a lehető leginkább környezetbarát termékeket tervez és gyárt azáltal, hogy újrahasznosítható, alacsony károsanyag-
tartalmú termékeket gyárt és csomagolásokat alkalmaz.
A D-Link azt javasolja, hogy mindig kapcsolja ki vagy húzza ki a D-Link termékeket a tápforrásból, ha nem használja azokat. Ezzel segít az energia
megtakarításában és a széndioxid kibocsátásának csökkentésében.
Környezetbarát termékeinkről és csomagolásainkról további információkat a www.dlinkgreen.com weboldalon tudhat meg.
NORSK NO
Dette symbolet på produktet eller forpakningen betyr at dette produktet ifølge lokale lover og forskrifter ikke skal kastes sammen
med husholdningsavfall, men leveres inn til gjenvinning. Vennligst ta det til et innsamlingssted anvist av lokale myndigheter når
det er kommet til slutten av levetiden. Noen steder aksepteres produkter uten avgift. Ved på denne måten å gjenvinne produktet
og forpakningen hjelper du å verne miljøet og beskytte folks helse.
D-Link og miljøet
Hos D-Link forstår vi oss på og er forpliktet til å minske innvirkningen som vår drift og våre produkter kan ha på miljøet. For å minimalisere denne
innvirkningen designer og lager D-Link produkter som er så miljøvennlig som mulig, ved å bruke resirkulerbare, lav-toksiske materialer både i
produktene og forpakningen.
D-Link anbefaler at du alltid slår av eller frakobler D-Link-produkter når de ikke er i bruk. Ved å gjøre dette hjelper du å spare energi og å redusere
CO2-utslipp.
For mer informasjon angående våre miljøansvarlige produkter og forpakninger kan du gå til www.dlinkgreen.com.
121D-Link DSL-3788 User Manual121
Appendix D - Regulatory Statements
DANSK DK
Dette symbol på produktet eller emballagen betyder, at dette produkt i henhold til lokale love og regler ikke må bortskaes som
husholdningsaald, mens skal sendes til genbrug. Indlever produktet til et indsamlingssted som angivet af de lokale myndigheder,
når det er nået til slutningen af dets levetid. I nogle tilfælde vil produktet blive modtaget gratis. Ved at indlevere produktet og dets
emballage til genbrug på denne måde bidrager du til at beskytte miljøet og den menneskelige sundhed.
D-Link og miljøet
Hos D-Link forstår vi og bestræber os på at reducere enhver indvirkning, som vores aktiviteter og produkter kan have på miljøet. For at minimere
denne indvirkning designer og producerer D-Link sine produkter, så de er så miljøvenlige som muligt, ved at bruge genanvendelige materialer
med lavt giftighedsniveau i både produkter og emballage.
D-Link anbefaler, at du altid slukker eller frakobler dine D-Link-produkter, når de ikke er i brug. Ved at gøre det bidrager du til at spare energi og
reducere CO2-udledningerne.
Du kan nde ere oplysninger om vores miljømæssigt ansvarlige produkter og emballage på www.dlinkgreen.com.
SUOMI FI
Tämä symboli tuotteen pakkauksessa tarkoittaa, että paikallisten lakien ja säännösten mukaisesti tätä tuotetta ei pidä hävittää
yleisen kotitalousjätteen seassa vaan se tulee toimittaa kierrätettäväksi. Kun tuote on elinkaarensa päässä, toimita se lähimpään
viranomaisten hyväksymään kierrätyspisteeseen. Kierrättämällä käytetyn tuotteen ja sen pakkauksen autat tukemaan sekä ympäristön
että ihmisten terveyttä ja hyvinvointia.
D-Link ja ympäristö
D-Link ymmärtää ympäristönsuojelun tärkeyden ja on sitoutunut vähentämään tuotteistaan ja niiden valmistuksesta ympäristölle mahdollisesti
aiheutuvia haittavaikutuksia. Nämä negatiiviset vaikutukset minimoidakseen D-Link suunnittelee ja valmistaa tuotteensa mahdollisimman
ympäristöystävällisiksi käyttämällä kierrätettäviä, alhaisia pitoisuuksia haitallisia aineita sisältäviä materiaaleja sekä tuotteissaan että niiden
pakkauksissa.
Suosittelemme, että irrotat D-Link-tuotteesi virtalähteestä tai sammutat ne aina, kun ne eivät ole käytössä. Toimimalla näin autat säästämään
energiaa ja vähentämään hiilidioksiidipäästöjä.
Lue lisää ympäristöystävällisistä D-Link-tuotteista ja pakkauksistamme osoitteesta www.dlinkgreen.com.
122D-Link DSL-3788 User Manual122
Appendix D - Regulatory Statements
SVENSKA SE
Den här symbolen på produkten eller förpackningen betyder att produkten enligt lokala lagar och föreskrifter inte skall kastas i
hushållssoporna utan i stället återvinnas. Ta den vid slutet av dess livslängd till en av din lokala myndighet utsedd uppsamlingsplats,
vissa accepterar produkter utan kostnad. Genom att på detta sätt återvinna produkten och förpackningen hjälper du till att bevara
miljön och skydda människors hälsa.
D-Link och miljön
På D-Link förstår vi och är fast beslutna att minska den påverkan våra verksamheter och produkter kan ha på miljön. För att minska denna påverkan
utformar och bygger D-Link sina produkter för att de ska vara så miljövänliga som möjligt, genom att använda återvinningsbara material med
låg gifthalt i både produkter och förpackningar.
D-Link rekommenderar att du alltid stänger av eller kopplar ur dina D-Link produkter när du inte använder dem. Genom att göra detta hjälper
du till att spara energi och minska utsläpp av koldioxid.
För mer information om våra miljöansvariga produkter och förpackningar www.dlinkgreen.com.
PORTUGUÊS PT
Este símbolo no produto ou embalagem signica que, de acordo com as leis e regulamentações locais, este produto não deverá ser
eliminado juntamente com o lixo doméstico mas enviado para a reciclagem. Transporte-o para um ponto de recolha designado pelas
suas autoridades locais quando este tiver atingido o m da sua vida útil, alguns destes pontos aceitam produtos gratuitamente. Ao
reciclar o produto e respectiva embalagem desta forma, ajuda a preservar o ambiente e protege a saúde humana.
A D-Link e o ambiente
Na D-Link compreendemos e comprometemo-nos com a redução do impacto que as nossas operações e produtos possam ter no ambiente.
Para minimizar este impacto a D-Link concebe e constrói os seus produtos para que estes sejam o mais inofensivos para o ambiente possível,
utilizando meteriais recicláveis e não tóxicos tanto nos produtos como nas embalagens.
A D-Link recomenda que desligue os seus produtos D-Link quando estes não se encontrarem em utilização. Com esta acção ajudará a poupar
energia e reduzir as emissões de CO2.
Para saber mais sobre os nossos produtos e embalagens responsáveis a nível ambiental visite www.dlinkgreen.com.
Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.
Product:
Spelregels forum
Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:
lees eerst de handleiding door;
controleer of uw vraag al eerder door iemand anders is gesteld;
probeer uw vraag zo duidelijk mogelijk te stellen;
heeft u een probleem en al geprobeerd om dit op te lossen, vermeld dit erbij aub;
heeft u een oplossing gekregen van een bezoeker dan horen wij dat graag in dit forum;
wilt u een reactie geven op een vraag of antwoord, gebruik dan niet dit formulier maar klik op de knop 'reageer op deze vraag';
uw vraag wordt direct op de website gezet; vermijd daarom persoonlijke gegevens in te vullen;
Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.
Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.
Abonneren
Abonneer u voor het ontvangen van emails voor uw D-Link DSL-3788 bij:
nieuwe vragen en antwoorden
nieuwe handleidingen
U ontvangt een email met instructies om u voor één of beide opties in te schrijven.
Ontvang uw handleiding per email
Vul uw emailadres in en ontvang de handleiding van D-Link DSL-3788 in de taal/talen: Engels als bijlage per email.
De handleiding is 8,24 mb groot.
U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.
Uw handleiding is per email verstuurd. Controleer uw email
Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.
Er is een email naar u verstuurd om uw inschrijving definitief te maken.
Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken
U heeft geen emailadres opgegeven
Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.
Uw vraag is op deze pagina toegevoegd
Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.