CyberLink LabelPrint
8
LightScribe Media Identification
The LightScribe system requires the use of LightScribe-enabled discs. LightScribe
uses control features in the center/hub of the disc to identify media as LightScribe
media. If your system does not seem to recognize the media as LightScribe media,
take the following steps.
1. Make sure the disc is a LightScribe-enabled disc. LightScribe media will have
the LightScribe logo in the inner hub area. There will also be visible control
features inside, and adjacent to, the coated label area.
2. Make sure the disc is properly oriented in the drive. The label side, which
contains a special coating, should be face down in the drive.
3. Clean the center area (hub) of the disc. Use a lint-free cloth to wipe the hub
area and remove any dirt or smudges that may be covering the control
features.
4. If these steps do not fix the problem, try another LightScribe disc.
Labelflash Media Identification
Labelflash system requires the following discs:
• Burning on Data Side: CD-R, DVD+R and DVD-R
• Burning on Label Side: Labelflash DVD+R and Labelflash DVD-R
If your system does not seem to recognize the media, take the following steps
1. When burning images on the label side, make sure the disc is a Labelflash-
enabled disc. Labelflash media will have the Labelflash logo in the inner hub
area.
2. Make sure the disc is properly oriented in the drive. The side which will be
printed, should be face down in the drive.
3. Clean the center area (hub) of the disc. Use a lint-free cloth to wipe the hub
area and remove any dirt or smudges that may be covering the control
features.
4. If these steps do not fix the problem, try another Labelflash disc.
