19
ENG
Audio/Video connection to a TV with S-Video and stereo audio
input
If your TV has an S-Video input, it is recommended that you use this Video con-
nection. The S-Video connector is distinguishable by its 4 pins, as shown on the
left side. S-Video separates brightness and colour signals, resulting in a higher
video quality than standard composite video. For the audio connection you can
use the red and white stereo audio in connectors of your TV.
Have the following cables ready:
1. S-Video cable (not supplied)
2. Audio/Video cable - red and white plug (not supplied)
3. Power cord (Please note that model DVD 4620 has a fixed power cord!)
1. Use a special S-Video cable (not included in your accessory) to connect the
S-Video output of your DVD player to the S-Video input of your TV.
2. If you wish to hear sound through the TV, connect the stereo audio outputs
of your DVD player to the matching inputs of your TV using the red and white
connectors on an audio/video cable.
3. If you are using model DVD 4010, connect the supplied AC power cord to
the “AC IN” inlet on the rear side of this unit, then plug into a power outlet.
As model DVD 4620 has a fixed power cord, only plug the other end of the
fixed power cord into the wall socket, if you are using model DVD 4620.
4. Turn on the TV and the DVD player.
5. Select the S-Video input on your TV. For this please refer to the user man-
ual of your TV. You should now see the DVD player’s splash screen on your
TV.
AUDIO AND VIDEO CONNECTIONS
123
S-Video socket
