810366
328
Verklein
Vergroot
Pagina terug
1/396
Pagina verder
326
Checking and relling levels
Only top up with fresh coolant according to
CUPRA specications ›››page324.
Only top up with coolant if there is still some
coolant left in the expansion tank; otherwise
the motor could be damaged! If you do not see
any coolant in the expansion tank, do not con-
tinue driving and seek specialist assistance.
If there is still some coolant left in the ex-
pansion tank, top up with coolant up to the
tank’s upper mark and check the level the next
day. If the level drops again, go to a workshop
and request a check of the cooling system.
The coolant level must be between the
marks on the expansion tank ›››Fig.209.
Never exceed the top edge of the marked
area ››› .
Screw the cap on tightly.
If engine coolant with the recommended
specications is not available in an emergency,
do not use any other coolant additive! In this
case, top up with distilled water ››› only.
Next, ensure that the recommended additive
is topped up as soon as possible in the correct
proportion ›››page324.
WARNING
Steam and hot motor coolant can cause se-
vere burns.
Never open the front bonnet if you see
or hear steam or coolant escaping from the
front compartment. Always wait until you can
no longer see or hear steam or coolant es-
caping. Touching hot parts can result in skin
burns.
Before opening the front bonnet, please
note the following:
Apply the electronic parking brake.
Always keep children away from the front
compartment and never leave them unat-
tended.
When the motor is hot, its cooling system is
pressurised. Do not open the expansion tank
cap, hot coolant may splash out and cause
severe burns and other injuries.
Turn the cap slowly and very carefully an-
ticlockwise while pressing it down slightly.
Always protect your face, hands and arms
from the hot coolant and steam with a
large thick cloth.
NOTICE
Only use distilled water! Other types of wa-
ter contain chemical substances that could
cause signicant corrosion damage. If you
have added non-distilled water, have all of
the motor cooling system uid changed im-
mediately by a specialist workshop.
When topping up the, do not ll over the
upper edge of the marked area ›››Fig.209.
Otherwise, when the temperature rises the
excess uid will be expelled from the motor
cooling system and could cause damage.
If the system leaks a lot of coolant, only
rell once the motor has cooled down com-
pletely. If there is a signicant loss of coolant,
there may be leaks in the cooling system. Im-
mediately go to a specialist workshop to have
the system checked. This could result in mo-
tor damage.
Do not add coolant if the expansion tank
is completely empty! Air may have got into
the cooling system. Do not continue driving
and seek assistance from specialist person-
nel. This could result in motor damage.
When changing the operating uids, make
sure that you pour the correct uids into the
correct ller necks. Using the wrong operat-
ing uids can lead to serious malfunctions
and motor damage.
328

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cupra Formentor - 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cupra Formentor - 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cupra Formentor - 2022

Cupra Formentor - 2022 Gebruiksaanwijzing - Nederlands - 424 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Deutsch - 415 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Français - 436 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info