810366
306
Verklein
Vergroot
Pagina terug
1/396
Pagina verder
304
Fuel and exhaust gas cleaning
Fill AdBlue®
Fig.194 AdBlue tank cap®.
Operations prior to relling
Park the vehicle on a at surface and turn o
the ignition. If the vehicle is on a slope or on
a curb, the level indicator may not detect the
rell properly.
If an AdBlue® warning message is shown on
the instrument cluster display, ll with at least
the minimum required amount (approx. 5 li-
tres). Only after adding this amount will the
system detect that AdBlue® has been added
and you will be able to start the engine again.
Fill with a rell bottle
Only use AdBlue® that complies with the ISO
22241-1 standard.
Only use original containers.
Open the tank cover ›››Fig.194.
Unscrew the tank cap by turning it in an anti-
clockwise direction.
Please observe the manufacturer's instruc-
tions, indicated on the rell bottle.
Check the expiry date.
Remove the cap of the rell bottle.
Insert the neck of the bottle in the tank
ller neck vertically and screw the bottle on by
hand, by turning it in a clockwise direction.
Press the rell bottle in the direction of the
ller neck and hold it in this position.
Wait until the contents of the rell bottle
have been poured into the AdBlue® tank. Do
not compress or break the bottle!
Turn the bottle in a counter-clockwise direc-
tion and gently pull it upwards ›››page304.
The AdBlue® tank is full when no more liquid
comes out of the bottle.
Screw on the tank cap in a clockwise direc-
tion until it is tightly closed.
Close the fuel tank ap.
Relling AdBlue® at the dispenser
Valid for vehicles with selective catalytic reduc-
tion.
Open the tank cap.
Turn the SCR tank cap anti-clockwise
›››Fig.194.
Fill with AdBlue® until the nozzle stops for
the rst time.
Close the SCR tube by turning it clockwise
until you hear a click.
Operations before driving
After relling the tank, only switch on the ig-
nition.
Leave the ignition on for at least 30 seconds
for the system to detect the uid load.
Make sure you wait for at least 30 seconds
before starting the engine!
WARNING
AdBlue® should only be stored in its original
container, which should be tightly closed and
kept in a safe place.
NOTICE
When relling, the nozzle grip should be
aligned downward. Otherwise the nozzle will
not connect automatically.
Do not try to add any more additive after
the nozzle has stopped for the rst time. The
AdBlue® tank could overow and AdBlue®
could spill out.
Only use AdBlue® that complies with the
ISO 22241-1 standard. Only use original con-
tainers.
306

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cupra Formentor - 2022 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cupra Formentor - 2022 in de taal/talen: Engels als bijlage per email.

De handleiding is 7.81 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Cupra Formentor - 2022

Cupra Formentor - 2022 Gebruiksaanwijzing - Nederlands - 424 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Deutsch - 415 pagina's

Cupra Formentor - 2022 Gebruiksaanwijzing - Français - 436 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info