447900
12
Verklein
Vergroot
Pagina terug
1/38
Pagina verder
22 23
Reflection Plate and Diffuser
The flash unit has an integrated reflection plate
and a diffuser. You can slide out the reflection
plate or the diffuser on the upper side, swivel the
flash head and use the reflection plate to shoot
photos with a heavy effect. The diffuser can
reduce the strong light, creating soft effects.
Using the diffuser is recommended to achieve
ideal results at close proximity (1 – 3 yards).
Energy-Saving Function
To save electricity, the flash unit automatically
switches off approximately 3 minutes after it has
been switched on or since the most recent flash
was released. The LCD display indicates the
“OFF” signal. To reactivate the flash unit, simply
press any button switch below the LCD display
table or switch the main switch off and back on.
The flash unit is not full switched off in the
energy-saving function setting, but its energy use
is drastically reduced. When you are no longer
using the flash unit, set the main switch to “OFF”.
ENG
ENG
Power-Zoom
Automatic control of the motorized zoom
When using zoom lenses that transmit their focal
widths to the camera, the camera forwards this
information to the flash unit. Then the flash unit
automatically adjusts its zoom position. The
automatic reflector control of the motorized zoom
is possible with cameras that permit the digital
transmission to the flash unit.
The LCD display on the flash unit indicates zoom
positions of 24-28-35-50-70-85 mm. When the
flash unit is switched on, the zoom is activated
and the position is set at 35 mm. As soon as the
camera’s release is touched only slightly, the focal
width of the flash unit is automatically adapted to
the focal width of the lens.
Whenever the flash head is not at the normal set-
ting (pointing forwards) whereby it is in another
position, the zoom position clicks to 50 mm and
is indicated in the LCD display by a short flash in
the Auto mode.
Manual Control of the Motorized Zoom
With the “Zoom” button, you can alter the
reflector position of the zoom independently
of the focal width of the lens. The LCD display
then indicates “M” and the current setting of the
reflector’s zoom position.
Light tapping of the “Zoom” button changes the
zoom position in this order: 24-28-35-50-70-85 mm.
Receiver Function
This flash unit can be operated as a wireless re-
ceiver by setting the switch “Slave Mode” to the
S position. The flash unit switches automatically
to the M mode with an energy ration of 1:1 and a
focal width of 24 mm. When the sensor discovers
the release of an extreme flash, the flash is
released simultaneously. The quantity of the light
emission can be selected by setting the energy
ration from 1/1 to 1/8. If several flash units
are used as receivers, then the corresponding
quantity of light must be taken into consideration
in order to calculate the correct lighting. If the
reception mode is activated, the energy-saving
mode does not operate.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cullmann D 4500 update bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cullmann D 4500 update in de taal/talen: Nederlands als bijlage per email.

De handleiding is 1,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info