627082
7
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
7
EN
If the battery leads are incorrectly connected, the reverse polarity protection will
ensure that the battery and charger are not damaged.
Start charging
1. When you are sure the battery leads are correctly placed, connect the charger
to the wall socket. The charger will indicate that the mains voltage is connected.
If the battery leads are incorrectly connected, the reverse polarity protection will
ensure that the battery and charger are not damaged. The fault indicator lamp will
be lit. If this is the case start from section 1 again “Connection of charger...”.
2. In order to start charging the correct current and voltage must be set by pressing
the “MODE” button until the proper setting is lit. Selecting the setting for your
battery is described in “BATTERY TYPES AND SETTINGS”.
3. The lamp for deeply discharged battery will indicate if the battery voltage is low
(seeMinbatteryvoltagein“TECHNICALSPECIFICATIONS”).
4. Normalchargingwillbeindicatedbythelampsforsoftstart(deeplydischarged
battery) bulk charge, absorption charge or maintenance charge. When the
lamp for maintenance charge is lit this means that the battery is fully charged.
The charge will restart again if the voltage drops. Indications for Recond and
Snowakemodesaredescribedin“BATTERYTYPESANDSETTINGS”.
5. If the lamp that indicates settings and the power lamp remains lit but no other lamp
is lit, there could be a bad connection to the battery or chassis or the battery could
be defect or have a terminal voltage that is too low. The charger requires that the
battery voltage is above a certain level, see “TECHNICAL SPECIFICATIONS”
to start the charging cycle. This means that if the battery is in a state of deep
discharge the charger will be unable to charge the battery in question. Another
reason could be lack of power from the wall socket. Start by improving the
connection between the battery and the charger.
6. Charging can be stopped at any time by disconnecting the mains cable from
the wall socket. Always disconnect the mains cable from the wall socket before
disconnecting the battery leads. When you interrupt charging of a battery installed
in a vehicle, you must always disconnect the battery lead from the chassis before
disconnecting the other battery lead.
CHARGING STEPS
All battery chargers charge and analyse in eight fully-automatic steps.
The MULTI XS 4003 model has many different settings, see “BATTERY TYPES AND
SETTINGS.
The battery chargers have an 8 step fully-automatic charging
cycle:
Desulphation
Desulphationwithpulsesrestoressulphatedbatteries.Thisisindicatedwithaxed
beam during this step.
Soft start
Starting mode for charging cycle. The start step continues until the battery terminal
voltage has risen above the set value, at which time the charging switches to bulk
charge. If the terminal voltage has not reached the set level within a set time, the
charge is stopped and the charger indicates error mode. The battery is then probably
defective or too large.
Bulk
Main charge until 80% of the charge is complete. The charge is carried out at
maximum current charge until the terminal voltage reaches the set level. Bulk
charging has a maximum time. The charging then switches to Absorption.
Absorption
Final part of the charge up to 100%. During this step the charge current falls
gradually to ensure the terminal voltage does not get too high. If the maximum time
for Absorption is exceeded, the charger switches automatically to maintenance.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Ctek Multi XS 4003 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Ctek Multi XS 4003 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,79 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Ctek Multi XS 4003

Ctek Multi XS 4003 Gebruiksaanwijzing - Nederlands - 10 pagina's

Ctek Multi XS 4003 Gebruiksaanwijzing - Deutsch - 12 pagina's

Ctek Multi XS 4003 Gebruiksaanwijzing - Français - 10 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info