Handleiding Crosscall Element (pagina 3 van 22) (Engels)

644980

Verklein

Vergroot

Pagina terug

1/22

Pagina verder

Content

1. Know your phone ....................................................................................................................... 2

2. Preparation for mobile phone before opening ........................................................................... 3

3. Set the phone............................................................................................................................. 7

4. Feel free to contact .................................................................................................................... 7

5. Connected to the wireless network ............................................................................................ 8

6. Capturing life moments .............................................................................................................. 9

7. Map ......................................................................................................................................... 10

8. Gmail.com ................................................................................................................................ 10

9. Sync ......................................................................................................................................... 11

10. Email ....................................................................................................................................... 11

11. Troubleshooting ....................................................................................................................... 16

12. Safety and general information………………………………………………………………………………………………17

Thank you for purchasing this mobile phone

Please read all safety precautions and this manual carefully before using your device to

ensure safe and proper use.

Content, images and screenshots used in this manual may differ in appearance from

the actual product.

No part of this manual may be reproduced, distributed, translated, or transmitted in any

form or by any means, electronic or mechanical, including photocopying, recording, or

storing in any information storage and retrieval system, without the prior written permission.

Before using the phone, please read the following detailed

Charge the battery

Mobile phone battery is not charged. Phone is charging; do not remove the battery as this

may cause damage to the phone.

Also, do not attempt to disassemble the phone (otherwise the guarantee repair may be

invalid).

Understand the Privacy Act

Some countries establish the strict regulations for phone calls recording method in time.

We recommend that you use the phone recording at the beginning of understanding of the

country prior to the applicable law, this is a better approach.

*****Important reminder*****

Most of the applications on the phone need to continue to use the network

connection. Strongly recommend that you purchase the wireless network operator

package. If you do not purchase wireless Internet package, the network may make

prolonged use of mobile data traffic costs increased. Consult the use of your

package to operating agencies before start using mobile phones.

1. Know your phone

1. MENU

2. HOME

3. BACK

4. RECEIVER

5. FRONT CAMERA

6. MICRO USB JACK

7. MICPHONE

8. 3.5MM EARPHONE JACK

9. POWER KEY

10. VOLUME UP

11. VOLUME DOWN

12. REAR CAMERA

13. FLASHLIGHT

14. SPEAKER

2. Preparation for mobile phone before

opening

Press the power button, Be sure to have everything ready.

1. Push down the back cover.

2. Remove the battery cover.

3. Insert the SIM/USIM card(SIM card copper node down).

4. Insert the SD card (SD card copper node down).

5. Insert the battery.

6. Insert the battery cover.

7. Push the back cover up.

Charging the battery

Use the supplied power adapter and USB data cable to charge the phone.

3. Set the phone

Power on the phone first time, please log in to your Google account, Gmail ™ or Google

Mail or other Google applications was used. You can also set other email accounts,

Facebook ® or Twitter ™, etc. to your favorite social network. In addition, contacts and

other information of other brands mobile phones will be sent to the purchase of a new

phone by Bluetooth.

The home screen personalization.

You can change phone's main screen on the basis of your demand. You can choose

personalized configurations from the topic, can also create a theme for personal use, and

choose a different panel and wallpaper.

In addition to the main screen, there are four additional master screen panels that allow

you to add the desired content. Add gadgets, applications, shortcuts, and folder, just click

you can immediately access.

4. Feel free to contact

You can contact with your family, friends, in many ways.

Call

You can make a call anytime and anywhere. You can manually enter a phone number to

make a call, and can also make a call through contacts which stored in the device memory

or in the memory of the SIM card. You can also call operators service number to

communicate them anytime, anywhere to resolve the network problems, and to obtain the

appropriate services.

Contacts

You can add contacts in many ways.

Imports from SIM card

You can imports all of the contacts you have save in the SIM memory before.

Add a new contact

There are two different ways to add new contact:

a. Enter numbers manually and save a new contact to your device.

b. Select a number in the phone records to save a new contact to your device.

Synchronize contacts from a network account

If your device had set the Google and / or Exchange ActiveSync account, please select

the account you want to synchronize.

Short Message Service (SMS)

A SMS can be send anytime and anywhere to contact your friends.

A MMS (Multi Media Service) can even take photos, rings or any other media contents.

5. Connected to the wireless network

You can connect to the network via data or Wi-Fi.

Using data connection

This procedure is simple and fast. The first time you power on the phone (need to insert

SIM card); the phone will connect to the operator's data services automatically.

Using Wi-Fi

While the Wi-Fi function turned on, the device will connect to the network automatically in

opened wireless network area. If the network enabled the security, you must input the

correct security password to connect.

Web surfing

if the device connected to a wireless network correctly, your device can access the

Internet through Browser, browse the Web and download pictures, music and any other

multimedia resources.

You can use finger touch browsing and zooming.

Application

Connected to the network, you can log in to the market to download and install any of your

favorite applications; many millions of applications can be selected. Through the

installation of these applications, according to your preferences, the theme of device

interface can be self-defined; even you can also install some applications to replace the

built-in applications such as Call, SMS and other applications. In addition there are tens of

thousands of games and other applications waiting for you.

These applications can be installed to the phone memory, and can also be installed to the

SD card extended memory.

If you do not like these applications anytime, anywhere, you can uninstall these

applications.

6. Capturing life moments

You can use the camera's built-in 5.0 megapixel rear camera and 3.0 megapixel front

camera, shooting high-resolution photos. The camera allows you to add special effects

photos to make your photos look like use special lenses and filters. You can also mark the

photos, and upload to Facebook ® and other social networks.

The camera even has HD video recording functions. You can also upload your videos to

YouTube and Facebook ®, to share with the rest of the world.

7. Map

Whether you were at home or abroad, the map application is the number of partners you

are traveling. It allows you to easily navigate the map, search for nearby places to go; you

can also set the destination of your route to go.

Use the map

Phone supports micro SD card expansion; you can download maps navigation software

into the SD card for free.

Before traveling abroad, you can first download maps of other countries into your phone.

So you do not need to use data link to view the map or search site, can help you save a lot

of roaming charges.

Upgrade Service

if you need detailed GPS road navigation, and violation camera information, they can be

acquired by way of additional services.

Select> the map. Press MENU, and then choose to upgrade.

Slide to the service tab, select the service you want to buy.

Choose to buy.

8. Gmail.com

If you first set your phone to skip the Google account application process, go to Settings

and select the account and sync> Add Account> Google, set up your account.

You can also use the computer's web browser to apply account.

Go to Gmail.com, and follow the onscreen instructions.

9. Sync

You can use Google accounts to synchronize phone and computer contacts, calendar,

e-mail.

You can also use the USB data cable link to the computer through the network to

download PC Suite to synchronize or install and uninstall the program.

Expansion of micro SD card can also function as a removable disk usage.

10. Email

On the main menu, click e-mail.

If you have multiple email accounts, select the account you want to use.

In the Inbox of E-mail account, choose to write messages.

Then choose to the email address that you want send e-mail contact.

You can also enter an email address. Each address separated by commas.

Enter topic, then enter your content. Then select “Send”.

All e-mail accounts use the same inbox.

You can see all the e-mail accounts in one place, without having to switch between

different accounts.

Simply select settings that show current email account, then select all the accounts.

Gmail/Google Mail

On the phone lets you view and send e-mail message directly.

If you log on your Google account when set the phone the first time; you can send and

receive Gmail / Google Mail messages. In the main menu, select Gmail.

Add other email accounts

You can use the mail application to add webmail and other POP3 or IMAP email accounts.

On the main menu, click e-mail.

In the selection screen of E-mail provider, select Other (POP3/IMAP).

Press MENU, then select Add Account> Other (POP3/IMAP).

Enter the e-mail accounts e-mail address and password.

Follow the onscreen instructions to complete the e-mail account settings.

If you have a working Microsoft Exchange ActiveSync account, you can also set the

second phone account.

FCC RF Exposure Information and Statement

The SAR limit of europe is 2.0 W/kg averaged over one gram of tissue. Device types

Element (FCC ID: WA6 Element) has also been tested against this SAR limit. The highest

SAR value reported under this standard during product certification for use at the ear is

0.133W/kg and when properly worn on the body is 0.159W/kg. This device was tested for

typical body-worn operations with the back of the handset kept 1.5cm from the body. To

maintain compliance with FCC RF exposure requirements, use accessories that maintain

a 1.5cm separation distance between the user's body and the back of the handset. The

use of belt clips, holsters and similar accessories should not contain metallic components

in its assembly. The use of accessories that do not satisfy these requirements may not

comply with FCC RF exposure requirements, and should be avoided.

FCC WARNING

This device complies with Part 15 of the FCC Rules. Operation is subject to the following

two conditions:

1. This device may not cause harmful interference.

2. This device must accept any interference received, including interference that may

cause undesired operation.

Note 1:

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or

television reception, which can be determined by turning the equipment off and on, the

user is encouraged to try to correct the interference by one or more of the following

measures:

- Reorient or relocate the receiving antenna.

- Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver

is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Note 2:

Any changes or modifications to this unit not expressly approved by the party responsible

for compliance could void the user's authority to operate the equipment.

FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices

On July 10, 2003, the U.S. Federal Communications Commission (FCC) Report and

Order in WT Docket 01- 309 modified the exception of wireless phones under the Hearing

Aid Compatibility Act of 1988 (HAC Act) to require digital wireless phones be compatible

with hearing-aids. The intent of the HAC Act is to ensure reasonable access to

telecommunications services for persons with hearing disabilities. While some wireless

phones are used near some hearing devices (hearing aids and cochlear implants), users

may detect a buzzing, humming, or whining noise. Some hearing devices are more

immune than others to this interference noise, and phones also vary in the amount of

interference they generate. The wireless telephone industry has developed a rating

system for wireless phones, to assist hearing device users find phones that may be

compatible with their hearing devices. Not all phones have been rated. Phones that are

rated have the rating on their box or a label located on the box.

The ratings are not guarantees. Results will vary depending on the user’s hearing device

and hearing loss. If your hearing device happens to be vulnerable to interference, you may

not be able to use a rated phone successfully. Trying out the phone with your hearing

device is the best way to evaluate it for your personal needs.

M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate

less interference to hearing devices than phones that are not rated. M4 is the better/higher

of the two ratings.

RS90 is rated M3.

T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more

usable with a hearing aid’s telecoil than phones that are not rated. T4 is the better/higher

of the two ratings.

Element is rated T3.

Please power off the Bluetooth function while using hearing aid devices with your

Element.

Hearing devices may also be rated.

Your hearing device manufacturer or hearing health professional may help you find this

rating. Higher ratings mean that the hearing device is relatively immune to Interference

noise.

Safety and regulatory guide

The hearing aid and wireless phone rating values are then added together. A sum of 5 is

considered acceptable for normal use. A sum of 6 is considered for better use. A sum of 8

is considered for best use. In the above example, if a hearing aid meets the M2 level

rating and the wireless phone meets the M3 level rating, the sum of the two values equal

M5. This should provide the hearing aid user with “normal usage” while using their hearing

aid with the particular wireless phone. “Normal usage” in this context is defined as a signal

quality that is acceptable for normal operation. This methodology applies equally for T

ratings. The M mark is intended to be synonymous with the U mark. The T mark is

intended to be synonymous with the UT mark. The M and T marks are recommended by

the Alliance for Telecommunications Industries Solutions (ATIS). The U and UT marks are

referenced in Section 20.19 of the FCC Rules. The HAC rating and measurement

procedure are described in the American National Standards Institute (ANSI) C63.19

standard.

For information about hearing aids and digital wireless phones,

FCC Hearing Aid Compatibility and Volume Control:

http://www.fcc.gov/cgb/dro/hearing.html

Gallaudet University, RERC:

https://fjallfoss.fcc.gov/oetcf/eas/reports/GenericSearch.cfm

Troubleshooting

If problems occur when using the phone, try to find a solution here first.

Problems

Reasons and Solutions

Can’t switch on

 Press and hold end key until image appears on the display.

 Check the battery contacts. Remove and insert battery and switch

your phone on again.

 Check the battery charge level.

Can’t connect to

network

 Move into an area of better coverage.

 Beyond the network cover area；

 Contact your service provider if your SIM card is invalid.

The audio quality of

the call is poor

 Press navigator key to increase the volume when you are in a call.

 Check the signal strength indicator on the display.

 The line is busy and can not be connected to network; you can not

make a call.

Standby time too

short

 When failing to connect to network, the phone will keep searching

base station that consumes much battery and reduces standby time.

Move to an area with stronger signal strength or switch your phone

off temporarily.

 Replace the battery.

SIM card error

 Make sure that the chips in SIM card are not damaged; use the clean

cloth to scratch it.

 Make sure that SIM card is inserted correctly.

 SIM card invalid. Contact your service provider.

Can not dial calls

 Make sure that the number you dialed is available and the dial key

has been pressed.

 Make sure that there is enough money to make a call.

 Make sure that SIM card is valid.

 Fixed Dial is set or has call barring feature turned on. Deactivate

fixed dial function or call barring.

Can not receive calls

 Make sure that your phone has connected to network (Check if the

network is too busy or invalid).

 Make sure that there is enough money to receive the call.

 Make sure that SIM card is valid.

 Check call divert settings and incoming call barring settings.

The battery won’t

charge

 Make sure that the battery is inserted correctly. Securely connect the

charger to the phone.

 Only charge the battery in an environment where the temperature

does not go below -10℃ or above 55℃.

 The battery or charge need to be changed.

Can not set some

functions

 The operation is wrong.

 The network providers do not support the function, or you don’t apply

the function.

Safety and General Information

Read these guidelines before using your wireless phone. Failure to comply with them

may be dangerous or illegal.

1.1 General Precautions

1) Mobile Phone

 Please use the phone at a temperature of -10℃~55℃ and a relative humidity of

35%~85%.

 Avoid using the phone near regular telephone, television, radio and automatic office

equipment, as they may interfere with one another.

 Please keep the removable SIM card out of the reach of children as there is a risk

they could swallow it.

2) Battery

 Please put the battery in a cool and well-ventilated place out of direct sunlight.

 Batteries have life cycles. If the time that the battery powers equipment becomes

much shorter than usual, the battery life is at an end. Replace the battery with a new

battery of the same.

 Do not discard battery with household trash. Please dispose of used battery

according to your local environmental laws and guidelines.

3) Charger

Do not charge the phone in the below environment:

 Under direct sunlight;

 Temperature out of range: -10℃ to 45℃;

 Humid, dusty or severely shaking environment (could cause a malfunction);

 Near appliances such as television, radio (could affect the image, audio effect).

1.2 Phone Precautions

1) Switch off your phone in aircraft, hospital and any facility where posted notices

instruct you to do so. Wireless phone can cause interference to electronic

instruments and medical equipment, when using your phone in such kind of area,

meet any special regulations in force. Your phone features automatically power on

function, check your power settings and make sure your mobile phone will not

automatically switch on when on board an aircraft. Turn off your phone whenever on

board an air craft, so as not to interfere with electronic system and result in aircraft

accidents.

To prevent any interference, keep your device at least 15 cm away from a

pacemaker.

To reduce any risk of interference with a pacemaker, hold the device on the opposite

side away from the implant.

2) To avoid electromagnetic interference and/or compatibility conflicts, turn off your

mobile phone in any facility where posted notices instruct you to do so. Hospitals or

health care facilities may be using equipment that is sensitive to external RF energy.

Especially when near the below devices: hearing aid, pacemaker and other medical

devices, fire detector, automatic door and other automatic control devices. In the

event of mobile phone interfering with pacemaker and other medical electronic

devices, consult the manufacturer of the device or local salesman. Mobile phone may

interfere with appliances like television, radio, or PC

3) Do not hit the LCD display with extreme force or use it to hit other things. Doing so

may break the glass and cause the LCD liquid to leak. If the liquid enters into eyes, it

may blind you. In such case, rinse with a large quantity of water immediately (do not

rub your eyes) and consult a doctor.

4) Do not disassemble or remodel your phone. Doing this may damage your phone or

result in the leakage of electricity and circuit fault.

5) In a very few cases, the use of mobile phone may interfere with the electronic

equipments in some cars. In such case, for safety, do not use mobile phone.

6) Do not press keys with sharp things like needle or pen head. Doing so may cause

damage to your phone or operation mistakes.

7) Do not use the mobile phone if it has a damaged antenna, as it may cause injury to

persons.

8) Turn your phone off and do not remove its battery or charge the battery when in an

area with a potentially explosive atmosphere. Sparks in such areas could cause an

explosion or fire resulting in property damage, bodily injury or even death. For

example: switch off the phone before entering refueling point. Do not use the phone

near at a refueling point (service station) or near fuels or chemicals.

9) Keep your phone away from moisture. If water or other liquids get into phone, it will

cause phone overheating, leakage of electricity and malfunction. To be sure to secure

micro USB and jack connectors by closing properly the waterproof caps of your

smartphone

1.3 Battery Safety Precautions

1) Battery Precautions

 Do not throw a battery into a fire. A battery may rupture or bum violently when

thrown into a fire. Please dispose of the used battery according to your local

environmental laws.

 When installing battery, do not forcibly put pressure on the battery, or it may result

in overheating, leaking, rupturing or fire.

 Do not short-circuit the positive (+) and negative (-) terminals. If the positive and

negative terminals come into contact with each other or are shorted with wire or

other metallic objects, an instantaneous high current will flow, possibly damaging

the battery structure due to the generated heat, with the possible result of

overheating, leaking, rupturing or fire.

 Do not exceed the battery manufacturer's charging current or voltage limitations.

And only use the approved peripherals.

 Do not directly solder anything onto the battery terminals. Direct soldering onto the

battery terminals can cause heat generation, leaking, rupturing or fire.

 If the electrolyte inside the battery gets into your eyes, it may blind you. In such

case, do not rub your eyes but rinse with a large quantity of water immediately and

consult a doctor.

 For safety, do not put the battery into your mouth or use the damaged battery.

 Do not attempt to disassemble or modify a battery. Doing so may result in leaking,

overheating, rupture or fire.

 Do not use or put battery near high temperature places like fire or heat-generating

parts, or it may cause leaking, overheating, rupture or fire.

 Stop using the battery if abnormal heat, odor, discoloration, deformation, or

abnormal conditions are detected during use, charge, or storage.

 Do not allow leaked electrolyte to come into contact with your skin or clothes. If this

happens, rinse with a large quantity of water immediately and consult a doctor.

 If the battery leaks electrolyte or emits a strange odor, immediately remove it from

open flame to avoid fire and rupture.

 Keep battery from moisture, as it may cause the battery to overheat, smoke and

corrode.

 Do not place or store the battery in an automobile in hot weather, under direct

sunlight. Use or storage of the battery in these places may cause battery leakage

and overheating, and possibly lower the performance and shorten the battery's life.

 Only use the approved batteries and fittings. Do not connect to unspecified

devices.

 Do not continuously charge the battery for more than 24 hours, as battery may be

damaged by extensive overcharging.

2) Battery Capability

 Calling, backlight on and playing game drain your battery much quicker. Long

talk-time decreases the duration of the standby time.

 Idle time becomes shorter if the phone is out of coverage.

 Battery capability varies along with charging level, temperature, signal strength,

and backlight.

1.4 Disposing of Used Battery

The rechargeable batteries contain toxic heavy metals like mercury, cadmium, and

lead. Improperly disposed batteries will cause heavy metal contamination. These

batteries when discarded in ordinary household or workplace, after a long time, the heavy

metal will leach slowly into the soil, ground water and surface water. Therefore, please

dispose of used battery in a proper way.

1) Do not land filled, because the heavy metal will leach slowly into the soil, ground

water and surface water.

2) Do not incinerate, because the heavy metals can enter the air through smokestack

emissions and can concentrate in the ash produced by combustion.

3) Do not compost, because the heavy metals in the compost may exceed standards.

4) Do not throw away used batteries random, avoiding environmental pollution.

5) Separate wasted batteries from household trash, reducing its harm to the

environment.

1.5 Charger Precautions

1) Use charger to charge battery quickly. Before charging, make sure the battery has

been inserted in the phone correctly. Do not remove the battery while charging.

2) Please use the specified alternating current. Using other voltage will cause

electricity leakage, fire or damage to the phone and charger.

3) Charge your battery for at least 12 hours at the first time for its best performance

and long cycle life.

4) If the charger still plugs in the charge slot and the phone has been fully charged, the

phone will check the battery state automatically, and recharge the battery once it is

not at full level.

5) While the mobile phone is being charged, keep it out of the reach of children.

6) Do not short-circuit the charger. A short-circuit may result in electric shock, smoke

and damage to the charger.

7) If the power cord is damaged, please do not use the charger, or it may cause fire or

electric shock.

8) Please clean the dust on the power outlet in time.

9) Do not put container filled with water beside charger, as water may be splashed on

charger, causing the charger overheating, leakage of electricity and malfunction.

10) If the charger comes into contact with water or any other liquids, immediately unplug

the charger from outlet to reduce the risk of overheating, fire, electric shock or

charger malfunction.

11) Do not disassemble or modify the charger. Doing so could result in risk of injury to

persons, electric shock, fire and damage to the charger.

12) Do not use charger in a high moisture environment like bathroom, or it may cause

electric shock, fire and damage to the charger.

13) Do not touch the charger, power cord and power outlet with wet hands as it may

cause electric shock.

14) Never put a heavy object on the power cord or modify the power cord. Doing so may

cause electric shock or fire.

15) To reduce risk of electric shock or injury, unplug the charger from the power outlet

before cleaning or maintenance.

16) When you disconnect the power cord of the charger, grasp and pull the plug, not the

cord. Pulling the cord may cause electric shock and fire.

1.6 Care and maintenance

Your phone is a product of superior design and craftsmanship and should be treated

with care. By following the warranty obligations and by caring for your mobile, you can

enjoy it for many years:

1) Keep the phone dry. Precipitation, humidity and liquids containing minerals will

corrode the electronic circuits;

2) Do not use or store the phone in dusty areas as the dust could obstruct or damage

the moveable parts;

3) Do not store the phone in hot areas. High temperatures can shorten the life of

electronic devices, damage batteries and warp or melt certain plastics;

4) Do not store the phone in cold areas, because moisture can form inside the phone

when temperature rises, which may damage the electronic circuits;

5) Do not drop, knock, bump or shake the phone. Rough handling may damage the

internal circuits. Put the phone in a safe place when you do not use it;

6) Use a slightly cloth damping with clean water or neutral soap to clean your phone

housing. Never use any chemical or abrasive cleaners, as they could damage the

phone;

7) Do not paint your phone as the paint could obstruct any moving parts and prevent

normal use;

8) Use only approved batteries and accessories. Use of any unauthenticated batteries

and accessories could damage your phone and may be dangerous;

9) If there’s something wrong with your phone or its accessories, do not attempt to

dismantle the phone. Contact qualified service personnel to repair your phone.

1.7 SAR Information

During testing, the maximum Specific Absorption Rate (SAR) recorded for this

model was 0.159 W/kg at the body level and 0.133 W/kg at the head level.

1.8 Terminology explanation

GSM

Global system of mobile

SMS

Short message service

SIM

Subscriber identify module card

Personal computer

PIN code is a 4-8 digit personal identification number, and is used to

prevent your SIM card from misuse. It is provided by your service

provider. If you enter 3 times error PIN code continuously, the SIM

card will be locked, and then you must enter PUK code to unlock.

PIN2

PIN code is a 4-8 digit personal identification number. It is provided by

your service provider. To protect the access of some advanced

functions like fixed dial. If you enter 3 times error PIN2 code

continuously, the SIM card will be locked, and then you must enter

PUK2 code to unlock.

PUK

An 8 digit key code. Used to unlock SIM cards after the wrong PIN has

been entered. PUK is provided by your service provider.

PUK2

An 8 digit key code. Used to unlock SIM cards after the wrong PIN2

has been entered. PUK2 is provided by your service provider.

Compliance

This device complies with essential recommandation and other relevant requirements

contained in the 1999/5/CE. The full text of the déclaration of conformity of your phone is

available on the website: www.crosscall.com

0700

At full volume, extended use of the mobile audio player could damage

the user’s ears.

Crosscall Element Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Crosscall Element

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info