Presser foot
. . . . . . . . . . . . . . . . . . . . . .
zigzag foot
Program selection
. . . . . . . . . . . . . . . . . .
1-2-3-13
Stitch length dial
. . . . . . . . . . . . . . . . . . . . . . .
1 to 4
Beautiful two-colored patterns can be produced
by using a twin needle and threads of different
colors.
1
2
43
Spool holder
Thread guide
Sewing with a twin needle
Insert the twin needle in the same way as a
single needle
(flat side to the back).
Put two equally fully wound spools on the
extensible spool holders (31).
Make sure that both felt disks, which are
supplied with the accessories, are placed on the
two spool holders.
For threading, lead both threads through the
thread holder, as you do it when threading a
single needle.
1. When it comes to the upper thread tension
dial (20), lead both threads through the disks,
i.e.one of them on the right, and the other one
on the left from the medium disk, as shown.
2. Lead both threads into the thread guide.
When it comes to the eyes of the needle,
lead one thread into the right eye and the
other one into the left eye of the needle.
For sewing a corner with the twin needle,
raise the needle out of the fabric, since
otherwise the twin needle could either
break or be bent.
*
NOTE: Make sure ONLY to use stitch types
1, 2, 3, or 13 when using twin needles.
Not included. Please be careful when purchasing
twin needles that the distance between the two
needles does not exceed 0.1 inch.
*
