736582
10
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
10 GB/IE
Bringing into use
table top is level, flat and non-slip.
j Place a chair in front of the device.
j Sit on the chair.
j Insert your hands into the straps on the pedals
2
,
7
or grasp the pedals or the pedals with the
massage nodes
12
,
13
.
j Change the distance between the device and
the chair if you find that the distance is too
small or too large.
j Move the pedals
2
,
7
,
12
,
13
smoothly
and regularly.
Q
Computer functions
You can also use the arm and leg trainer with the
training computer
6
switched off. However, the LC
display
17
of the training computer
6
(see Fig. E)
can give you helpful information about the results
of completed training sessions and tells you how
your training may be improved.
The arm and leg trainer is a device in accuracy
class C. This means no claims are made about the
accuracy of the information displayed by the train-
ing computer
6
.
Switching the device on and off:
The training computer
6
switches itself on auto-
matically as soon as you begin the training session
or move the pedals
2
,
7
,
12
,
13
. The values
are shown in the LC display
17
.
If the device is not moved for about 4 minutes, the
training computer
6
will switch off automatically.
LC display:
During the training session the first line of the LC
display
17
shows
– the current speed (approximate value)
During the training session the second line of the
LC display
17
shows
– the various modes in an automatic sequence
Modes:
j During training, press the MODE button
18
repeatedly until the SCAN indicator appears.
The LC display
17
now shows the following
modes for 6 seconds each in sequence:
TIME: Previous training time in
minutes: seconds
(0:00 – 99:59)
SPEED: Speed in km / h
(0.0 – 999.9 km)
ODO: Total distance covered
since the last insertion of
the battery (0 – 9999 km)
Note: This value is reset
to 0 as soon as the ex-
hausted
battery is removed
and replaced
by a new
battery.
RPM: Pedal rotation measured in
revolutions / minute
(0 – 9999)
DISTANCE: Distance covered km
(0.00 – 9999 km)
CALORIES: Calories used
1)
(0.00
– 9999)
1)
The calculation is based on the preprogrammed
standard values, which are provided as indicative
values only.
Resetting the values:
The values in the LC displays
17
are zero only at
the start of your first training session. For all subse-
quent training sessions, the training computer
6
continues from the values achieved at the end of
the previous session.
You can reset the indicators by pressing the MODE
button
18
and keeping it pressed until all the indi-
cators are once more visible at the same time.
The rest total distance (ODO) is reset by removing
the battery.
Q
Replacing the battery
j Take the training computer
6
carefully out of
the holder. The training computer
6
is con-
nected by a cable to the housing
1
and can
be pulled a maximum of 10 cm out of the holder.
j Remove the exhausted battery.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crivit Z31434 IAN 87953 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crivit Z31434 IAN 87953 in de taal/talen: Duits, Deens als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Crivit Z31434 IAN 87953

Crivit Z31434 IAN 87953 Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 36 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info