Handleiding Crivit Sports 10-LD2590 (pagina 1 van 1) (Engels)

482700

Verklein

Vergroot

Pagina terug

1/1

Pagina verder

Basic settings

The setting mode for basic settings is activated by

inserting the battery or by pressing RESET (on

the back side of the unit).

The language selection will appear on the display.

Select a language (English, German or French)

by pressing B, Confirm your selection by pressing

The display will now show the mode for advanced

users

ADVANCE / FORTGES / AVANCE

Or for beginners

EASY / EINFACH / FACILE

Select a mode by pressing B. Confirm your

selection by pressing A.

Important: In easy mode only the following

features are available:

Speed, average speed, trip distance and trip

timer.

In advanced mode all features are available and

settings for 2 bicycles can be stored.

C1 will now appear on the display. Set the

circumference of your tire in mm (see “Calculating

tire circumference”). Press B to set each digit and

press A to confirm each setting.

If you have selected advanced mode, you may

now enter the tire circumference for an additional

bicycle.

Calculating tire circumference

Tire circumference can be easily calculated by

multiplying the tire diamtere with 3.1416.

The tire curcumference of some standard tire

types is listed in the following table.

Diameter Circumference

20" 1598

22" 1759

24" 1916

26" (650A) 2073

26,5" (Tubular) 2117

26,6" (700x25C) 2124

26,8" (700x28C) 2136

27" (700x32C) 2155

28" (700B) 2237

ATB 24"x1,75 1888

ATB 26x1,4 1995

ATB 26x1,5 2030

ATB 26x1,75 2045

ATB 26x2 (650B) 2099

27"x1 2138

27"x1 1/4 2155

The display now shows the unit of distance

SET KM / EINST KM / AJUSTE KM

Select the unit miles (M) or Kilometers (KM) by

pressing B. Confirm your setting by pressing A.

The display now shows the age selection

SET AGE / ALTER / AGE

Set your age in years. Press B to set each digit

and pres A to confirm each setting.

The display now shows the unit of weight

selection

SET KG / EINST KG / AJUSTE KG

Select the unit Kilogram (KG) or Pounds (LB) by

pressing B. Confirm your selection by pressing A.

The display now shows the weight selection

SET WT / GEWICHT / POIDS

Set your weight in the selected unit. Press B to

set each digit and pres A to confirm each setting.

The display will now show the 12 or 24 hour time

format selection

SET CLK / EINST U / REG MONT

Select your preferred format by pressing B.

Confirm your selection by pressing A.

Set the hours and minutes in the same way.

The display will now show the service interval

selection

SERVICE / SERVICE / SERVICE

Set the interval by pressing B. Confirm your

selection by pressing A.

Possible settings are 200, 400, 600 or 800

Kilometers or Miles

If you selected advanced mode you may now

select the service interval for an additional bicycle.

The display will now show the temperature unit

selection. Select the temperature unit Celsius (°C)

or Fahrenheit (°F) by pressing B. Confirm your

selection by pressing A.

Using the bicycle computer

Press B to select a feature mode of the computer.

The lower row of the display will show the name

of the mode.

Press A to reach the subfeatures of each mode.

Press and hold A to reach the setting mode of a

feature or reset stored values.

Time

CLOCK / UHRZEIT / HEURE

Press and hold A for 3 seconds to enter time

setting mode (see basic settings)

Total distance

TOTODO / KM-RAD / KM-VELO

Press and hold A for 3 seconds to enter setting

mode for tire diameter (see basic settings).

After tire diameter setting the stored values for the

odometer can be changed.

Total distance for both bicycles

TOTALODO / GESAMTKM / DIST-TOT

Press and hold A for 3 seconds to enter tire

circumference setting (see basic settings).

After tire diameter setting the stored values for the

odometer can be changed.

Trip distance

TRIPDIST / TAGES-KM / DISJOUR

Press and hold A for 3 seconds to reset trip

distance, trip time and average speed.

Maximum speed

MAXSPEED / MAX-KMH / VIT-MAX

Press and hold A for 3 seconds to reset the stored

maximum speed.

Average speed

AVGSPEED / DURCH-KM / VITMOYEN

The average speed can be reset in the menu „trip

distance“.

Trip time

TRIPTIME / FAHRZEIT / TEMPPARC

The trip time can be reset in the menu „trip

distance“.

Thermometer

TEMP / GRAD / TEMP

Press A to show the maximum (HI) and minimum

(LO) values.

Press and hold A for 3 seconds to reach

temperature unit selection (°C or °F) (see basic

settings)

Stop watch

STPWATCH / STOPPUHR / CHRONO

Press A to start or stop the stop watch. Press and

hold A to reset the stop watch.

Current calorie consumption

CAL RATE / KAL RATE / CONS CAL

Calorie consumption at the current speed is

displayed.

Calorie counter

CAL RATE / KAL RATE / CONS CAL

Press and hold A for 3 seconds to reset the

calorie counter.

Fat burn in grams

FAT-BURN / FETT / GRAS

Press and hold A for 3 seconds to reset the fat

burn counter.

Distance counter (forward/reverse)

KM / KM / KM

Press and hold A for 3 seconds to reach the

setting mode for the distance counter.

The symbol for the forward counter (-) or reverse

counter (+) will appear. Press B to select a

counter and confirm your setting by pressing A.

You can now set the desired distance. Press B to

set each digit and press A to confirm each setting.

After the set distance has been covered the

display will blink. Press A to stop the blinking.

Trip timer (forward/reverse)

TIME / TIMER / TIMER

Press and hold A for 3 seconds to reach the

setting mode for the trip timer.

The symbol for the forward counter (-) or reverse

counter (+) will appear. Press B to select a

counter and confirm your setting by pressing A.

You can now set the desired riding time. Press B

to set each digit and press A to confirm each

setting.

After the set riding time has been completed the

display will blink. Press A to stop the blinking.

Scan mode SCAN

In scan mode SCAN will appear on the display.

The trip distance (DST), maximum speed (MXS),

average speed (AVS) and trip timer (TM) alternate

on the display.

Service reminder

When the set service interval is reached the

service reminder will blink on the display. Press A

to reset the service reminder.

Selection of bicycle 1 or bicycle 2

Press A and B together briefly to load the settings

for bicycle 1 or 2.

Please note: All stored values except total

distance will be reset.

Battery replacement (30-second memory)

Before changing the battery, please press and

hold A and B together. {{-----}} will appear

on the display. If a new battery is inserted within

30 seconds, the stored values will remain intact.

Press A.

Please dispose of your batteries properly in

containers especially set up at retailers. Batteries

do not belong in household waste.

Easy mode, advanced mode and custom

menus for easy mode

Press and hold C for 3 seconds.

The display will now show the mode for advanced

users

ADVANCE / FORTGES / AVANCE

or for beginners

EASY / EINFACH / FACILE

Select the desired mode by press B.

You can now confirm your selection by pressing A

or customize the easy mode. To customize easy

mode select the mode by pressing B, then press

and hold A.

Press B to activate (ON) or deacitvate (OFF) the

clock feature. Confirm your setting by pressing A.

The other features can be activated or

deactivated in the same way.

Energy saving mode

If the bicycle computer was not used for 5 minutes

it will automatically enter standby mode. Press

any button or start riding to reactivate the

computer.

Batteries

Please dispose of your batteries properly in

containers especially set up at retailers. Batteries

do not belong in household waste.

Disposal

This electrical appliance may not be disposed of

with normal household waste. Please hand it in at

an appropriate local collection point.

Warranty

We provide a 3-year warranty for this item. The

warranty period starts from the date of sale

(receipt, proof of purchase). Within this period we

rectify all faults which are attributable to material

and manufacturing defects at no cost. For

damage which is attributable to improper

treatment, e.g. dropping, knocking, or water

damage, there is no warranty claim.

Free sevice hotline: 00800 5515 6616

http://www.inter-quartz.de

digi-tech ®, Valterweg 27A, D-65817 Eppstein

Congratulations on your purchase of this bicycle

computer. Please read the instruction manual

before using the unit.

Safety notes

This electronic appliance must be

protected from water and other hazards.

It is not a toy and children should not

use it unsupervised.

Setup

The setup and installation of the bicycle computer

is described on the information sheet

„installation“.

After installing the bicycle computer, please

remove the protective foil from the display and

press any key to start the computer.

Light

Press C briefly to activate the light temporarily.

Cleaning instructions

Clean the product with a dry, lint-free cloth. A

glasses cleaning cloth is ideal.

Features

Memory for 2 bicycles

Service interval selectable

Speed display (0-99,9km/h)

Average speed (0-99,9km/h)

Maximum speed (0-99,9km/h)

Speed comparison

Speed tendency

(Accelerating or slowing down)

Trip timer (max 9:59:59)

Trip timer (forward or reverse counting)

Time

Stop watch

Distance counter (0-999,99km/m)

Distance counter (forward or reverse counting)

Distance counter for 2 bicycles

Total distance

Memory function for Odometer

Scan feature for alternating display

Thermometer with max./min. memory

Celsius or Fahrenheit selectable

Kilometers or miles selectable

Fat burn counter

Calorie counter

Standby feature

Auto start

Easy or advanced mode selectable

Backlight

Display description

1 Selected bicycle (1 or 2)

Speed tendency: acceleration (turning to the

right) or slowing down (turning to the left)

2 Service interval reached

3 Scan (alternating display)

4 Subfeature display

5 Main feature display

6 Battery low indicator

7 Speed comparison: faster or slower than

average speed

Scope of delivery

1 Info sheet „Installation“

2 Bicycle computer

3 Magnet

4 Wired sensor with mount

5 Battery 3V CR2032

6 Cable ties (6 pcs.)

A B

-1- -2-

-3-

-4-

-5- -6-

-7-

-8- -9-

-10-

-11-

-12-

-13-

-14-

-15-

10-LD2590

Edition 1

G/I

Crivit Sports 10-LD2590 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Andere handleiding(en) van Crivit Sports 10-LD2590

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info