Handleiding Crivit IAN 347012 WR 8221 (pagina 15 van 42) (Nederlands, Duits, Engels, Frans, Pools, Zweeds)

750298

Verklein

Vergroot

Pagina terug

1/42

Pagina verder

17GB/IE

Extra caution – risk of

injury to children!

• Keep the packaging materials

away from children. There is a risk

of suﬀocation!

• The product is not suitable play

equipment and must be stored

somewhere that is inaccessible to

children when not in use. To elimi-

nate the risk of injury, the product

must not be within reach of chil-

dren during the workout.

• Point out to children speciﬁcally

that the product is not a toy.

• Children must not be allowed play

with the product.

Dangers due to wear

and tear

• Check the product for damage or

wear before each use. Only use the

product if it is in perfect condition!

The safety of the product can only

be guaranteed if it is regularly

inspected for damage and wear.

If, for example, the strap or the

handles of the pull rod show signs

of damage, do not use the product

anymore.

• Use only original replacement parts.

• Protect the product from extreme

temperatures, sun and dampness.

Improper storage and use of the

product could lead to premature

wear and tear, and possible

breakages in the structure, which

could result in injuries.

• Do NOT permanently secure or

screw the product to the ﬂoor.

Doing so can cause considerable

damage to the product.

Warnings on batteries!

• Remove the batteries when they

are flat, or if the product is not in

use for an extended period.

• Do not use different types or

brands of battery or new and used

batteries together or batteries with

different capacities as these can

leak and cause damage.

• Ensure the polarity (+/-) is correct

when inserting the batteries.

• Replace all batteries at the same

time and dispose of the old batteries

as prescribed.

• Warning! Batteries must not be

charged or reactivated by other

means, taken apart, thrown into

fire or short-circuited.

• Always keep batteries out of reach

of children.

• Do not use rechargeable batteries!

• Cleaning and maintenance must

not be carried out by children

without supervision.

• Clean the battery and device

contacts as needed and before

inserting.

• Do not expose the batteries to

extreme conditions (e.g. radiators

or direct sunlight). Otherwise there

is an increased risk of leakage.

• Batteries can be life-threatening if

swallowed. Therefore, store batter-

ies in a place inaccessible to small

children. Medical attention must

be sought immediately if a battery

is swallowed.

Danger!

• Handle damaged or leaking

batteries with extreme caution and

dispose of them properly as soon

as possible. Wear gloves when

doing so.

• If you come into contact with bat-

tery acid, wash the affected area

with soap and water. If battery

acid gets in your eye, rinse it with

water and seek medical attention

immediately!

• The connection terminals must not

be short-circuited.

Inserting the batteries into the

product (Fig. H)

CAUTION: observe the following

instructions to avoid mechanical

and electrical damage.

Insert the enclosed batteries (18) into the battery

compartment (5q) of the computer (5).

Inserting the batteries

1. Remove the battery compartment cover (5p)

on the back of the computer (5).

2. Carefully insert the 2 x 1.5V batteries (18)

into the battery compartment (5q). The

batteries must be inserted fully into the battery

compartment.

Note: pay attention to the positive/

negative poles of the batteries and ensure

that they are inserted correctly as marked on the

bottom of the battery compartment.

3. Fasten the battery compartment cover onto

the back of the computer.

Replacing the batteries

CAUTION: observe the following

instructions to avoid mechanical

and electrical damage.

When the batteries are flat, replace them as

described in the insertion instructions. Remove

the batteries from the product before inserting

new ones.

Notes on setting up

• Choose a training area of approx. 3 x 1.8m

(L x W).

• Train on a ﬂat, non-slip surface only.

Assembly

The product should be assembled by

two people.

Take care with ﬂoors that are suscepti-

ble to damage! Use a mat or the like, if

necessary, to protect the ﬂoor.

Use the tool provided (16)/(17) to assemble the

product.

Step 1 (Fig. B):

1. Place the slide rail (2) on a solid, level surface

with the screw holes facing upwards.

2. Remove the pre-installed screws (2a) and the

washers (2b) at the end of the slide rail.

3. Slide the seat (3) onto the slide rail from

behind. To do this, direct the gliding carriage

under the seat into the guide on the slide rail.

Note: make sure that the seat is properly

aligned! The widest side of the seat must be

facing forwards.

4. Fasten the stopper (7) onto the back end of

the slide rail with the screws (10).

5. Place the cover cap (8) onto the end of the

slide rail.

Step 2 (Fig. C):

1. Leave the slide rail (2) inverted and fasten the

foot (4), with the screws (2a) and washers

(2b) removed previously.

Note: after assembling the product, adjust the

height with the little wheels (4a) on the left and

right of the foot.

Step 3 (Fig. D):

1. Turn the slide rail (2) 180° and insert the slide

rail into the base frame (1).

2. Fasten the slide rail on the base frame with the

screw (11), the washer (13) and the nut (12).

3. Screw the locking screw (14) and the washer

(15) from above into the threaded hole provid-

ed on the slide rail.

Note: tighten the locking screw so that the prod-

uct remains stable during training.

4. Secure the slide rail (2) with the locking pin (9).

Step 4 (Fig. E):

1. Remove the pre-installed screws (1a) on the

base frame (1).

2. Hold the computer (5) onto the base frame

and connect the two sensor cables of the

computer with those of the base frame.

Crivit IAN 347012 WR 8221 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info