736848
12
Verklein
Vergroot
Pagina terug
1/27
Pagina verder
10 GB/IE
Keep exits clear. Do not block the exit with
objects.
Make sure you know the fire precaution
arrangements on the site.
§Tent assembly
Inside the carrying bag there is a label with
a QR-code. If the QR code is scanned you
will receive details about how to pitch the
product.
Please ensure that the product is only
assembled by people with the appropriate
skills.
Note: The polyester material of the tent
consists of water-repellent material.
It is possible that during the first rainfall
the tent will not be completely watertight.
However, the threads of the tent will contract
when exposed to water so that after a short
time the tent will become watertight.
Erect the product in accordance with the
illustrations A to F.
Illustration A:
1. Place the outer tent 1 flat on the ground.
The holders for the poles 3 4 must be
facing upwards.
2. Push the poles marked in different colours
carefully through the holders marked with the
same colour.
Illustration B:
3. Set the tent 1 up and fix the poles to the
rings of the floor fastenings.
Illustration C:
4. Fix one side of the tent in the ground with
the tent pegs 7. Then take hold of the other
end of the tent and pull it apart in such a
way that the tent is taut.
5. Secure the outer tent 1 by tensioning the
floor fastenings with the tent pegs 7.
6. Now secure the outer tent 1 with the guy
rope (pre-assemble) 6 and the tent pegs
7.
Illustration D:
7. Open the sunroof (entrance), unroll it and
attach it with the two fasteners.
8. Hang the detachable pockets 12 in inner
tent.
Illustration E:
9. Hang the inner tent 2 and the floor
tarpaulin 9 into the toggle and click
closures of the outer tent 1 that are
designated for that purpose.
10. Use the hooks 8 at the corners of inner
tent 2 to connect with the outer tent 1.
Illustration F:
11. Stretch the tent until taut and pull all of the
corners and guy ropes 6 until they are
tight. Do not over-tighten the guy ropes
6. If the strength of the wind increases
the attachment point and seam of the tent
might tear. In order to use the entrance as
a sunroof, insert the main support poles 5
into one another and attach the pointed end
of the main support poles 5 into the holes
of the sunroof provided.
12. Secure the supporting poles 5 with the
supporting ropes 10 and the tent pegs 7.
13. Lay out the groundsheet 9 in the tent and
engage the hooks of the groundsheet 9 in
the rings of the tent attachments.
14. The door in the partition of the inner tent 2
can only be opened to one side.
§Taking down the tent
Clean the tent both inside and outside before
you take the tent down. The tent must be
dismantled in the reverse order to the manner
in which it has been erected.
§Packing the tent together
m CAUTION! Please ensure that the tent is
completely dry before you pack it together.
Otherwise this may result in stains and
damage to the fabric.
m CAUTION! The tent pegs 7 and other
individual parts must be packed separately in
the bags provided. Otherwise the tent pegs
7 might damage the tent.
Always fold the outer tent 1 together in
such a way that the floor of the tent is facing
outwards.
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crivit HG00412 IAN 273647 IAN 273648 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crivit HG00412 IAN 273647 IAN 273648 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans als bijlage per email.

De handleiding is 0,55 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info