736507
9
Verklein
Vergroot
Pagina terug
1/30
Pagina verder
11GB/IE
Prevent property damage!
Avoid water, oil, potholes and very rough
surfaces.
Assembly
The product is supplied folded for transport.
Proceed as follows to set it up for use:
Unfolding (Fig. A)
1. Pull the clamping lever (2) up and hold in
place.
2. Pull the lever (1) up, then release the clamping
lever (2) and unfold the steering post (3) until
it locks into place.
Handle assembly (Fig. B)
1. Remove the handles (4) from the holders (5).
2. Lift the cover flap (6).
3. Push in the locking buttons (7) on the handles
and slide the handles into both ends of the
T-bar (8) on the steering post. You must hear
the locking buttons lock into the designated
holes (9).
4. Push the cover flap over the locking buttons.
Adjusting the steering post (Fig. C)
The steering post can be adjusted to four differ-
ent levels. Only use the product with the locking
button locked into one of the four designated
holes and after securing the steering post with
the quick-release connector!
1. Release the quick-release connector (10) on
the steering post.
2. Pull up on the steering post (11) until the
locking button (12) latches into one of the four
holes (13).
3. Secure the steering post by locking the
quick-release connector.
Note: If the quick release is not tight against the
bar when closed, tighten the knurled screw using
the included socket head wrench.
Verify the quick release is locked before tight-
ening.
Steering head bearing (Fig. D)
On product delivery the steering head bearing
is preset. If the handlebar has too much play
after some time or becomes too tight, have the
steering head bearing adjusted by a speciality
retailer or a bicycle shop.
Brake
Adjusting the brake
ATTENTION!
The brake must be adjusted so the
back wheel moves freely when the
brake lever is released and locks when
engaging the brake lever.
Turn the adjusting and locking nut (21) to the left
to reduce the braking force, turn the adjusting
and locking nut to the right to increase the brak-
ing force (Fig. E).
Readying the product
fortransport
1. Release the quick-release lever (10) on
thesteering post and push in the locking
button (12) (Fig. C).
2. Push the steering post (11) in all the way and
tighten the quick-release lever (10) (Fig. C).
3. Lift the cover flap (6) (Fig. B).
4. Push in the locking buttons (7) on the handles
and pull the handles (4) out of the T-bar (8)
(Fig. B).
5. Secure the handles in the holders (5) (Fig. B).
6. Pull the clamping lever (2) up and hold
in place (Fig. F). Pull the lever (1) up, then
release the clamping lever (2).
7. Move the steering post toward the deck until it
locks into place (Fig. F).
Use
Riding, braking, parking (Fig. G)
Place one leg on the deck (14) and put into
motion by evenly pushing off with the oth-
erleg.
To brake, step on the brake plate (15) or pull
the brake lever (Fig. E).
Swing out the stand (16) to park.
Only park the scooter on level surfaces.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crivit BW 4533 IAN 292827 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crivit BW 4533 IAN 292827 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info