736243
10
Verklein
Vergroot
Pagina terug
1/32
Pagina verder
10 GB/IE
Storage, cleaning
It is recommended that the product be thorough-
ly cleaned and dried after being used.
Remove small stones or other objects that may
have remained on your wheels. Dry off wet or
damp ball bearings with a clean cloth.
Oil the bearings from the outside with a suitable
bearing oil to prevent rusting. Always store the
product in a dry place.
Disposal
Dispose of the article and the packaging materi-
als in accordance with current local regulations.
Packaging materials such as foil bags are not
suitable to be given to children. Keep the packa-
ging materials out of the reach of children.
Notes on the guarantee and
service handling
The product was produced with great care and
under constant supervision. You receive a three-
year warranty for this product from the date of
purchase. Please retain your receipt.
The warranty applies only to material and
workmanship and does not apply to misuse or
improper handling. Your statutory rights, espe-
cially the warranty rights, are not affected by this
warranty. With regard to complaints, please con-
tact the following service hotline or contact us by
e-mail. Our service employees will advise as to
the subsequent procedure as quickly as possible.
We will be personally available to discuss the si-
tuation with you. Any repairs under the warranty,
statutory guarantees or through goodwill do not
extend the warranty period. This also applies to
replaced and repaired parts. Repairs after the
warranty are subject to a charge.
IAN: 292955
Service Great Britain
Tel.: 0871 5000 720 (£ 0.10/Min.)
E-Mail: deltasport@lidl.co.uk
Service Ireland
Tel.: 1890 930 034
(0,08 EUR/Min., (peak))
(0,06 EUR/Min., (off peak))
E-Mail: deltasport@lidl.ie
Maintenance
Replacing the wheels (Fig. I)
Important! Please observe the technical
data. Wheels that have a different dia-
meter can change the riding properties
and, in some cases, possibly endanger
the user.
Do not use wheels that cannot be per-
fectly mounted.
Never mount wheels that are larger
than the product’s original wheels.
Wheels wear out. This wear and tear results from
many factors, for example the ground, the user’s
size and weight, the weather conditions, the ma-
terial of the wheels and their durability. It is thus
necessary to replace them from time to time.
• Loosen the axle bolts (19) with two size 5
Allen keys.
• Pull out the axle bolts and remove the wheel
(20).
• Install the new wheel and secure it with the
axle bolts.
After replacing:
Do not use if the wheel grinds on the
sides following replacement!
Make sure that all screws are still se-
cure and have not loosened after the
first few minutes of riding.
Tighten the wheel again to make sure
that it runs smoothly and that no noises
are coming from the bearings.
Exchanging the ball bearings
(Fig. J)
• Remove the wheels (20) as described.
• Press out one of the bearings (22) on the
spacer (21) by pressing with an Allen key
and remove the spacer.
• Press out the other bearing (22) by pressing
with an Allen key.
• Push in a new bearing. Turn the wheel over,
insert the spacer and then push in a second
new bearing.
• Secure the wheels again.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crivit AS 4553 IAN292955 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crivit AS 4553 IAN292955 in de taal/talen: Nederlands, Duits, Engels, Frans, Portugees, Spaans als bijlage per email.

De handleiding is 2,91 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info