736857
9
Verklein
Vergroot
Pagina terug
1/37
Pagina verder
9 GB/IE/NI
Installation / Start-upSafety / Preparation
Installation
Mounting the light
Prior to installation, remove the fuse or switch
off the circuit breaker (0 setting) in the fuse box.
Remove the screws
4
visible at the side of the
connection housing
2
and remove the mount-
ing bracket
1
at the back.
Use the slotted holes intended for the mounting
bracket
1
to mark the bores.
Now drill the fixing holes (ø 8 mm, depth ap-
prox. 40 mm). Ensure that you do not damage
the supply line.
Insert the rawlplugs
3
into the holes. Fasten
the mounting bracket
1
with the provided
screws
5
.
Open the plastic housing
13
. Then feed the
mains connection cable (external)
15
through
the protective tube
14
on the plastic housing
13
.
Now connect the connection cable of the light
to the mains connection cable (external)
15
us-
ing the terminal block
16
. Be sure to correctly
connect the individual wires of the mains con-
nection cable (external)
15
: live wire, black or
brown = symbol L, neutral wire, blue = symbol N)
.
Close the plastic housing
13
.
Use the screws
4
to fasten the luminaire to
the mounting bracket
1
.
Carefully insert the GU10 lamp
11
into the
socket and secure with a ¼ turn to the right.
Place a rubber washer
7
on each locating
screw
10
.
Insert the locating screws
10
through the glass
plate
8
.
Now place another rubber washer
9
on each
screw.
Secure the glass plate
8
to the light using the
locating screws.
Check for correct fitting.
Reinsert the fuse or switch the circuit breaker
back on.
Your light is now ready to use.
Start-up
Inserting / replacing
batteries (remote control)
Open the battery compartment at the back of
the remote control
17
.
Remove the spent battery, if necessary.
Insert new batteries into the battery compart-
ment. Only use type AAA batteries. Please note
the correct polarity.
This is indicated in the battery compartment of
the remote control
17
.
Close the battery compartment of the remote
control
17
.
Switching the luminaire on / off
You have the possibility of operating the luminaire
from an ordinary wall switch or switching it on and
off using the supplied remote control unit.
Switching the luminaire on / off using the
remote control unit:
The wall switch is in the basic position (OFF).
Activate the wall switch (ON).
Press the ON button on the remote control
17
to
switch the light on (GU10 LED lamp and colour
LEDs).
Push the OFF button on the remote control
17
to
switch the light completely off.
Switching the light on / off with the wall
switch
The wall switch is in the basic position (OFF).
Activate the wall switch (ON).
The GU10 lamps and the colour LED are on.
Activate the wall switch within approx. 1 second
by repeatedly pushing off and on. This will
switch through the various switch positions
(GU10 LED lamp and colour LEDs).
The light can be switched off with the wall switch
or the remote control
17
.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Crivit 14103504L IAN 276356 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Crivit 14103504L IAN 276356 in de taal/talen: Nederlands, Duits, Engels, Deens als bijlage per email.

De handleiding is 0,6 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Crivit 14103504L IAN 276356

Crivit 14103504L IAN 276356 Gebruiksaanwijzing - Français, Português, Espanõl - 61 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info