618072
12
Verklein
Vergroot
Pagina terug
1/23
Pagina verder
cressi.com
PLAN MODE: Dive planning.
While on surface, you can access the PLAN function in order to visualise, depending on the mixture used
(Nitrox or Air), the remaining time available at different depths (no-decompression limits). The values are given
both for the first of a (possible) series of dives and during the surface interval between two or more subsequent
dives; in such case Newton takes into account the residual nitrogen, therefore reducing the times within the no
decompression limits. To access the PLAN MODE, once the computer is on, press the UP button until PLAN is
displayed. Then, press the Mode button. The screen displays the values of the no decompression limits (no
decompression times) related to the different depths between 9 m and 48 m, with manual steps of 3 m achieved
by pressing the UP or DOWN button. Keep the Mode button pressed for a few seconds until hearing an
acoustic signal to confirm exit from the menu.
REMARK: The PLAN function will be switched off if the computer shows Error or in the case it is set in the
GAGE function.
GAGE MODE: depth gauge and timer.
Apart from the S-AIR MODE and S-NITROX MODE, the computer is provided with a third program called
GAGE (depth gauge and timer) that may be used for both apnea divers and for the use in “technical" dives. In
this case, the device just provides the dive basic parameters, i.e. depth and dive time. It does not make tissue
saturation and desaturation computation, which must be programmed and calculated by means of proper
software and/or tables. For such ends, Cressi reminds that all sport dives must be conducted within the no
decompression limits and at a maximum depth of 40 m (limit of sport dives). Exceeding these limits
dramatically increases the possibility of decompression sickness!
IMPORTANT: The Newton computer is designed for sport diving only and not for commercial or professional
use which require longer dive times and greater depths, consequently increasing the risk of decompression
sickness.
DANGER: Cressi discourages diving with gaseous mixtures other than air without proper training. The
use of “technical” multi-gas mixtures may expose the diver to different risks than those of recreational
diving, including serious physical damages and, in extreme cases, death.
IMPORTANT: after a dive in GAGE mode, the device will not make saturation and desaturation calculations for
the next 48 hours.
DANGER: Should you decide to reset the device by accessing the system mode, the nitrogen memory
will be cancelled. Therefore, the device will not be able to calculate the following dive. Before using this
function, wait for at least 48 hours after the last diving activity.
To access the GAGE program, press the UP or DOWN button until “GAGE" screen is displayed, then press the
Mode button. The word OFF/ON will flash. By pressing the UP or DOWN button the Gage program will be
connected or disconnected (ON/OFF).
When the Gage function is active, the MODE-S, DIVE-S and PLAN mode are disabled and on the lower right
section of the display it will appear the “G” icon.
REMARK: the Newton computer is factory set on the SET (MODE-S) AIR MODE function.
REMARK: the depth sensor provides indications between 0 and 120 m.
PLAN MODE
GAGE MODE
12
INDEX
LONG
x4x2
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
AUTOMATIC
RETURN OR
WITH LONG
MODE BUTTON
BEEP
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cressi NEWTON bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cressi NEWTON in de taal/talen: Engels als bijlage per email.

De handleiding is 8,29 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info