818974
13
Verklein
Vergroot
Pagina terug
1/340
Pagina verder
Error Code Description Solution
V18 Battery compartment (PMU) failure Check that the accelerator cables are connected properly
and restart the power supply.
V22 blade signal abnormal Check that the blade start switch is connected properly, and
then return the switch to its initial position.
V21 PMU CAN communication error Communication with the battery compartment timed out. Re-
start the power supply.
V23 Operator presence switch abnormal Check that the connector under the seat is connected prop-
erly, and then restart the power supply.
ML3 Left blade software overcurrent Check the mowing load and restart the power supply.
ML4 Left blade stalled Check the mowing load and return the blade start switch to
its initial position.
ML6 Left blade MOS error If you encounter this issue, contact your distributor for a
solution.
ML7 Left blade motor phase loss Check that the blade controller and motor cables are con-
nected properly, and then restart the power supply.
ML9 Left blade controller temperature
abnormal
The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply
ML14 Left blade hardware overcurrent Check the mowing load and restart the power supply.
ML15 Left blade failed to start Check the mowing load and return the blade start switch to
its initial position.
MR3 Motor lowspeed protection Check the mowing load and restart the power supply.
MR4 Motor overspeed protection Check the mowing load and return the blade start switch to
its initial position.
MR6 Motor Hall-sensor error If you encounter this issue, contact your distributor for a
solution.
MR7 Controller phase loss Check that the blade controller and motor cables are con-
nected properly, and then restart the power supply.
MR9 MOSFET open circuit error The controller temperature is too high. Wait for the controller
to cool down, and then restart the power supply.
MR14 Controller undervoltage Check the mowing load and restart the power supply.
MR15 Controller overvoltage Check the mowing load and return the blade start switch to
its initial position.
PMU10 Battery pack open circuit error The temperature of the battery compartment and battery is
too low. Use the machine at a suitable temperature and
restart the power supply.
PMU11 PMU major error The temperature of the battery compartment and battery is
too high. Wait for the battery to cool down, and then restart
the power supply.
PMU12 PMU secondary error A major error in the battery compartment prevented the
drive and blade systems from starting. Restart the power
supply and try again.
PMU13 No battery pack available Check that you are using the correct battery pack, and then
restart the power supply.
PMU Insufficient battery packs available,
functionality may be limited.
Please insert more battery packs.
13
English EN
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Cramer 82LT107 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Cramer 82LT107 in de taal/talen: Alle talen als bijlage per email.

De handleiding is 7.07 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info