743662
18
Verklein
Vergroot
Pagina terug
1/63
Pagina verder
TDMA CONTROL 601/701:
18
Published 07/2007
Example: Temperature Switch
Temperature sensor T2: No
Temperature T1 min: 55 °C
Temperature T1 max: 60 °C
T-PRO extended running: 2 minutes
If the temperature at temperature sensor T1 is lower than
the preset temperature of 55
o
C, the contact will close.
When the temperature rises to 60 °C at sensor T1, the
contact will reopen after the set extended running time of
2 minutes.
2.8 T-PRO 2
ADVICE
This function is not available with the CONTROL 601
Main Menu 12:34
T PRO 2 Input
A simpler temperature switch can be achieved using the
CONTROL 701.
T e m p e r a t u r e
MIN: 0…100°C
T e m p e r a t u r e
MAX: 0…140°C
The minimum and maximum values at which the „T-PRO
2“ should switch over are entered here. When the maxi-
mum set temperature is exceeded at the temperature sen-
sor the contact is opened. If the temperature falls below the
set minimum temperature the contact is closed. See the
Temperature Switch Example under paragraph 2.7.
T P R O 2 Extended Running Time:
0..6 0 M I N.
The „T-PRO 2“ function will only be deactivated once the
extended running time has expired.
Use T P R O 2 Time Switch:
Yes / No
If the time switch option „Yes“ is set the T-PRO 2 will only
be active during the two set time periods.
T P R O 2:
Each Day/Every Day/Weekend-
Weekdays
The time switch is set as described in paragraph 2.4.1.
2.9 Service Menu
Main Menu 12:34
S e r v i c e
Time 12:34
O k : hours/ minutes + / -
The time can be set here. Using the „-" and „+" keys the
hour can be set first, and once confirmed and entered by
pressing „OK“, the minutes can be set.
M o n d a y
Todays’s day - +
On first commissioning the actual day is entered here.
Set Factory Settings?
If „Set Factory Settings“ is confrimed with OK the regulator
will be set to it’s original factory settings and will operate
using its factor set base values (Variation 1).
Save Programme?
Load Saved Programme?
Settings particular to the customer can be saved and re-
loaded here.
Manual Operation?
All functions can be activated manually here.
Manually operated settings have priority. That is, pump,
valve or mixer functions can be switched on when that
particular function is switched off under another menu
point or even if that function is disrupted.
Example: Solar Pump Manual Operation
On: The solar pump is switched on permanently.
Off: The solar pump is switched off.
Auto: The regulator controls the solar hot water loading
to the thermal store following the settings.
NOTE:
If the hot water back up heating and the boiler func-
tions are activated manually by „on“ they switch back
to „Auto“ operation after 10 minutes automatically.
ATTENTION:
Any part of the system should only be switched on
manually for short periods and for test purposes. Con-
tinual running will lead to damage to the system or it’s
components because the safety functions are being
over ridden.
Block the Professional Menu?
After confirming this option with OK entry to some of the
input menus will be blocked and only accessible with a
18

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Consolar Control 601 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Consolar Control 601 in de taal/talen: Engels als bijlage per email.

De handleiding is 5,12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info