Handleiding Conrad CH-2000B - 560075 (pagina 2 van 4) (Nederlands, Duits, Engels, Frans)

693591

Verklein

Vergroot

Pagina terug

1/4

Pagina verder

Convector Heater with 24 h timer

Item no. 56 00 75

Intended use

The convector heater is for heating air inside rooms. The heating function has 3 levels: 750 W, 1250 W and

2000 W. The unit may only be operated with 230 V/AC, 50 Hz line voltage. It can be installed freestanding or

mounted on a wall. The unit is Protection Class II compliant.

Unauthorisedconversionand/ormodicationofthedeviceareinadmissiblebecauseofsafetyandapproval

reasons (CE). Any usage other than described above is not permitted and can damage the product and lead to

associatedriskssuchasshort-circuit,re,electricshock,etc.Pleasereadtheoperatinginstructionsthoroughly

and keep them for further reference.

Features

• 3 heating levels (750 W / 1250 W / 2000 W)

• Overheating protection

• Timer

Content of delivery

• Convector heater

• Wall mounting material

• Operating instructions

Safety instructions

We do not assume liability for resulting damages to property or personal injury if the

product has been abused in any way or damaged by improper use or failure to observe

these operating instructions. The guarantee will then expire!

An exclamation mark in a triangle indicates important information in the operating

instructions. Carefully read the whole operating instructions before operating the device.

Never cover the fan heater. When operating the heater, make sure there is sufcient

distance from objects so as not to interfere with air circulation. There is danger of re!

• Unauthorisedconversionand/ormodicationofthedeviceareinadmissiblebecauseofsafetyandapproval

reasons (CE).

• The appliance must not be subjected to heavy mechanical stress.

• Do not leave packaging materials around unattended; they can become a dangerous toy for children.

• This device is not a toy and should be kept out of reach of children. Children cannot properly assess the

dangers associated with electrical devices. Do not let children use electrical devices unsupervised.

• Never touch the unit or the plug with damp or wet hands. This could result in a life-threatening electric

shock.

• The unit may only be used in dry inside areas.

• Never submerge the unit in water.

• In no case should you open the enclosure of the unit.

• Never touch bare wires (e.g., heating wires) with your bare hands.

• In commercial facilities, the accident prevention regulations of the local association of workers’ compensation

boards for electrical systems and equipment must be complied with.

• Never operate the device without supervision.

• Do not use the device in close proximity to a bathtub, shower or swimming pool.

• Do not position the device right underneath a mains outlet.

• Always unplug the power plug from the mains socket before cleaning the device.

• Do not operate the device in conjunction with a separate timer, a separate remote control system or other

equipmentwhichcouldturnthedeviceonautomatically.Thiswouldconstitutearehazardifthedevice

were covered or otherwise positioned incorrectly.

• Operation under adverse conditions is not permissible. Adverse conditions are:

- moisture or excessively high humidity

- dustorammablegases,vapours,orsolvents

- inthevicinityofopenames.

• If there is reason to believe that safe operation is no longer possible, the device is to be put out of operation

and secured against unintended operation. Safe operation is no longer possible if the device:

- shows visible damages,

- no longer works,

- was stored under unfavourable conditions for a long period of time or

- was subject to considerable transport stress.

• Servicing, adjustment or repair works must only be carried out by a specialist/ specialist workshop

• If any questions arise that are not answered in this operating instruction, contact our Technical Advisory

Service or other experts.

Installation

Option 1

1. Fasten the feet with the screws on the underside

of the unit.

2. Place the unit on a heat-resistant, level surface.

Make sure that the air entrance and exit on the top

and underside are unobstructed.

Option 2

1. Drill 2 fastening holes in the wall onto which it is

to be fastened, at the same distance apart as the

mountings on the back side of the unit.

2. Fasten the suspension brackets with the gap

facing upward with screws and plugs.

3. Hang the unit with the slots on it.

4. Tighten the remaining 2 brackets at the holes on

the underside, mark out the drill holes, drill them

and fasten the whole unit securely to the wall.

Version 02/10

1. Choose a place for attachment that allows free circulation of air and at which there are no

ammableobjects.

2. Be careful not to damage any cables or pipes when drilling.

Operation

1. Connect the unit to a properly installed wall outlet with 230 V/

AC, 50 Hz.

2. Cross section and fuse protection of the feed line on which you

wanttoconnecttheunitshouldbesufcientforitsoutput.

3. Turn the unit on with one of the toggle switches (1 & 2). The

indicator lamp on the switch lights up when the unit is in operation.

- No switch activated – switched off

- (2) Switch 750 W – heating with 750 W

- (1) Switch 1250 W – heating with 1250 W

- (1 & 2) Both switches 750 W / 1250 W – heating with 2000 W

4. Set the desired ambient temperature with the thermostat (3).

When the set temperature is reached, the unit switches off – or

on again, if it goes below the set temperature.

5. Pull the plug out of the socket after use.

1 Toggle switch 1

2 Toggle switch 2

3 Thermostat

A slight odour of something burning after switching on should to a large extent vanish after a short

time, when all dust particles still on the heating wires have been burned.

Timer

1. Set the time switch to the current time. For this, turn

the outer dial (7) clockwise until the clock time (24 h

plan) matches the radial arrow symbol (8). The outer

dial allows for time settings in 15 minute intervals.

2. Move the red slide switch (5) onto the clock symbol.

The time switch is now activated.

3. Set the switch-on and -off times by moving the

switch cams (4) outward. Each cam corresponds to a

duration of 15 minutes (cf. scale). When all cams are

pushed out, the heater is switched on for 24 hours.

4. Position I of the red slide switch (5) switches the

heating functions on continuously, so that manual

operation is possible (toggle switches 1 & 2). The

single-handed clock (6) keeps running, but has no

inuenceonthesefunctions.

5. In Position 0 of the red slide switch (5), all heating

functions are switched off, but the clock continues

to run.

6. To turn the time switch off, pull out the power cord

of the unit.

Troubleshooting

Fault Possible Suggested solution

The device doesn’t work. Power connection interrupted

/ thermostat set too high / the

overheating protection has turned

the unit off / Time switch has

turned the unit off

Check the power plug / set the

thermostat / wait until the unit

cools off / Check time setting

The LED doesn’t light up. Heating not turned on / heating

element defective

Turn on heating level / repair by a

specialist / specialised workshop

Care and maintenance

Before every cleaning, separate the unit from the power network. If necessary, wait until it cools down to

normal temperature. It is best to clean the grille at bottom and top with a soft brush. The rest of the enclosure

is to be wiped off with a soft dry cloth, as needed. If there is more dirt, please use a lightly moistened cloth.

Do not use any abrasive cleaners or solvents.

After a longer period of not using the unit, make sure to remove most of the dust deposits from the heating

wires in the interior so that only slight remains are burned when turning it on again.

Disposal

Electronic devices are recyclable waste and must not be disposed of in the household waste.

At the end of its service life, dispose of the product according to the relevant statutory regulations.

Technical data

Operating voltage: 230 V/AC, 50 Hz

Power output Option 1

Option 2

Option 3

750 W

1250 W

2000 W

Dimensions (L x W x H): 580 mm x 198 mm x 342 mm

Weight: 2900 g

These operating instructions are published by Conrad Electronic SE,

Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany.

Allrightsincludingtranslationreserved.Reproductionbyanymethod,e.g.photocopy,microlming,orthecapturein

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

Theoperatinginstructionsreectthecurrenttechnicalspecicationsattimeofprint.

Wereservetherighttochangethetechnicalorphysicalspecications.

V5_0412_02-HL

Conrad CH-2000B - 560075 Handleiding

Hulp nodig? Stel uw vraag in het forum

Misbruik melden

Product:

Spelregels forum

Abonneren

Ontvang uw handleiding per email

Stel vragen via chat aan uw handleiding

Uw handleiding is per email verstuurd. Controleer uw email

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

U heeft geen emailadres opgegeven

Uw vraag is op deze pagina toegevoegd

Info