Be sure to follow the safety instructions of the tool manufactur-
er when using tools to install your parking aid system.
When installing the parking aid system, bear in mind that torn-
off pieces may pose a risk of accident. Therefore, fasten each
part securely in a location where it will not pose a risk to the
passengers.
The camera must not obstruct the rear lights, the number plate,
or any other part of the vehicle’s equipment, and it must not pro-
trude from the vehicle.
☞
These installation instructions do not apply to all vehicle types.
Due to the great number of car makes and models, the following
installation steps should only be taken as a general guideline.
For questions concerning your vehicle, please consult the
manufacturer of your vehicle. Check the local regulations if use
of the camera is permissible.
6.1 Camera installation
The following example shows the installation.
- Select an installation place for the camera.
- Check the position of the camera’s power cable to the rear lights. Determine
where to lay the power cables.
- Look for a suitable cable feedthrough in your vehicle for the power supply to the
camera.
☞
Some vehicles are already equipped with cable feedthroughs. If
your car, lorry, or motor caravan does not provide cable feedth-
roughs, appropriate holes must be drilled.
27
