11
TAKING A PICTURE
TAKING A PICTURE WITH THE LCD AT DISTANT MODE
Taking a picture with the LCD:
1. Set the camera to ( ) camera mode and make sure the Macro Switch is set to
the ( ) Distant Mode located on the front of the camera.
2. Frame the subject in the LCD.
3. Press the shutter button half-way to activate the auto-focus lock until the green
AF LED lights up. (fig.1.1)
• The camera will focus the lens at different distances to find the correct focus
range, and you will hear a rapid click sound from the camera.
4. Press the shutter button fully to capture the image. (fig.1.2)
• The camera will beep when the image is captured if sound is activated.
• The camera will make a click sound.
• When the image has been captured, the Flash Ready LED next to the
viewfinder will blink to indicate that the image is being stored.
•Apreview of the image will be displayed on the LCD for 1 second and the
picture counter number displayed in the LCD will be updated.
AUTO-FOCUS LOCK
This feature can be used to freeze the focus when the subject is not located in the
center of the picture at ( ) Distant Mode.
To use the focus lock:
1. Position the subject in the center of the red frame located in the LCD. (fig.1.3)
2. Press the shutter button halfway until the green Auto Focus LED lights up.
(fig.1.4)
Auto Focus LED Status Description
Blinking (fig.1.5) The camera is setting the focus.
Steady (fig.1.6) The subject is in focus.
