802865
45
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
88 89
ENEN
VR3100 | VR3110 | VR3120 VR3100 | VR3110 | VR3120
Error 18: Error encountered initiating shut-down The robot alerts the user and automatically shuts down
or recharges.
Error 19: Low battery, please recharge When the battery charge level is too low, the robot is not
in the docking station and cleaning starts (the battery
charge level is less than 10 %).
Error 20: To shut me down, please place me away from
the docking station
The robot was turned off while charging at the docking
station.
WIRELESS CONNECTION AND COMPATIBILITY
Jindřich Valenta - CONCEPT shall in no way be liable for any incidental, indirect or consequential damages, or for any
loss of data or loss due to information leakage during communication via wireless technology.
Successful wireless communication cannot be 100% guaranteed on all Smart devices and Wi-Fi networks (routers).
Due to the variety of devices on the market, there may be cases where the character or specification of a given
Smart device or Wi-Fi network (router) makes connection impossible or is somehow disturbed. In addition, a number
of factors, including hardware and software configuration, also affect the success of wireless communication via
Wi-Fi network. The connection between the robot and your Wi-Fi network can also be adversely affected by the
surrounding Wi-Fi networks, which can be tuned to the same channel and thus interfere with the connection (e.g. in
housing estates, apartment buildings, etc.). These facts are not a reason to claim the appliance.
The application is owned and operated by a third party (the “Entity”) different from Jindřich Valenta - CONCEPT (the
“Seller”). No personal data is transferred to the Entity by the Seller. When registering for the application, the customer
submits personal data directly to the Entity, who becomes the administrator of personal data. The application and the
associated protection of personal data are governed by the Entity’s rules.
Compatibility:
Smart device operating system - Android 5.0 and higher
- IOS 9.0 and higher
Wi-Fi network - 2.4 GHz
- WPA1 and WPA2 security (WPA2 recommended)
NOTICE: The appliance cannot be operated on IEEE 802.1X-protected Wi-Fi networks (usually corporate Wi-Fi networks).
OPERATING USING THE APP
Before you can control the device through the application, it is necessary to connect it to your phone and give it access
to your Wi-Fi network.
Recommended distance during set-up: less than 4 meters
Make sure your robotic vacuum cleaner, router, and your mobile phone are close together so that you can pair your phone
with the device with no problems.
Download and installation of the app
1. Download the “Concept Robot app to your smart device for free. You can find it in the Apple Store or Google Play
database (Fig. 1).
2. Open the “Concept Robot app on your smart device. Follow the instructions to create an account. You can use your
email to register your account. The application may require you (depending on smart device model and operating
system) to allow different accesses (e.g. access to storage, device location, etc.). For proper function, it is necessary
to enable these accesses. Otherwise, you may prevent the application from functioning properly or prevent it from
pairing (Fig. 2).
3. Log in to the application under your created account (Fig. 3).
Fig. 1 Fig. 2 Fig. 3 Fig. 5Fig. 4
Instructions for pairing the device
Note: Pair the vacuum cleaner with a charged battery or directly placed in the charging station.
1. At the beginning of pairing, you need to be connected to your Wi-Fi network.
2. Then press + (Fig. 4) in the application to add a new device.
3. Make sure that the appliance is in standby mode before starting the connection. Press both buttons (Fig. 5) at the
same time for at least 3 seconds until the robot starts flashing and you hear the Wi-Fi lost, please follow the App
instruction for reconnection” voice message. Make sure your phone is connected to the same Wi-Fi network you want
to connect the robot to.
4. At this point, the vacuum cleaner will start sending its own signal. Keep your smart device close to the vacuum
cleaner and wait until the vacuum cleaner appears on the display. Click “Next (Fig. 6).
5. Fill in the Wi-Fi network name and password (the same Wi-Fi network to which your smart device is connected).
6. Now the name of the network (hotspot) transmitted by the vacuum cleaner appears in the list of visible Wi-Fi networks
of your smart device. Select "Robot ..." and connect to it (Fig. 7). At this point, your smart device may alert you to the
possibility of unavailability of the Internet, but ignore this. Then click "<" (top left) to return to the application and
wait for the connection (Fig. 8 and 9).
7. Once the device is connected, the main screen will appear showing the device status (Fig. 10). You can now operate
the vacuum cleaner remotely (e.g. from work). For this function, however, you must always have the Wi-Fi network to
which the vacuum cleaner is paired activated.
Fig. 6 Fig. 7 Fig. 8 Fig. 10Fig. 9
45

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Concept VR3120 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Concept VR3120 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info