802865
41
Verklein
Vergroot
Pagina terug
1/99
Pagina verder
80 81
ENEN
VR3100 | VR3110 | VR3120 VR3100 | VR3110 | VR3120
1 Filter strainer cover
2 Dust container button
3 Wall sensor
4 System reset button
5 System upgrade connection
(this connection is for professional use only)
Docking station
1 Power indicator light
2 Signal transmission area
3 Base charging contacts
4 Catch groove
5 Cover plate
6 Cable passage
7 AC adapter socket
8 Winding pin
5
4
3
2
1
6
7
8
List of parts
1 Docking station 1x
2 Remote control 1x
3 Wiping cloth 2x
4 HEPA filter + foam filter 3x (for VR3100, VR3110 2x)
5 Adapter 1x
6 Cleaning brush 1x
7 Left and right brush 2x
8 HARDFLOOR brush 1x (VR3110, VR3120 only)
CAUTION! Cannot be used on carpets, cleaning may
be interrupted.
When using the HARDFLOOR brush, the robot starts
at the highest power level. The power level cannot be
changed furthermore.
9 CARPET brush 1x
10 Electrically operated water tank 1x (VR3120 only)
11 PET brush 1x (VR3110, VR3120 only)
12 Main brush cover 1x (VR3120, VR3110 only)
suitable for HARDFLOOR and PET brushes
13 Main brush cover with steel wire 1x (suitable for
CARPET brush)
14 Hanging water tank 1x (VR3100, VR3110 only)
8
9
10
11
12
13
14
4
5
3
2
1
1
2
3
5
6
7
4
KEY FEATURES
Cleaning / ON/OFF
Press briefly to start or pause cleaning.
Press and hold for 3 seconds to switch the appliance
on or off.
Long press for 15 seconds to force the appliance to
shut down under unusual circumstances.
Charging / Local cleaning
Press briefly to start or pause charging.
Long press to start local cleaning.
Indicator light
Orange (VR3100, VR3110) / turquoise (VR3120):
Normal operation or charging.
Red: Abnormal condition or low battery.
Red-orange (VR3100, VR3110) / light blue (VR3120):
The appliance is not connected to the network.
Wi-Fi reset
Press both buttons simultaneously for 3 seconds.
INSTALLATION
1. Connect the power cord and store the excess
cable length in the cable compartment.
2. Place the docking station against the wall and
connect the power.
Note:
Provide a space of min. 0.5 m on both sides of the
docking station and min. 1.5 m in front of the station.
If the power cord is stretched vertically to the ground,
the appliance may pull it out and the docking station
may be switched off.
In normal condition, the charging indicator light is on
when switched on. When the appliance is charged, the
indicator remains lit.
3. Do not move the docking station or expose it to
direct sunlight.
Note: Direct sunlight will interfere with the docking
station signal and the appliance may not return to the
docking station properly.
4. Installing the side brush
Make sure the left side brush (L) and right side brush
(R) markings correspond to the L and R markings on
the bottom cover. Push the side brushes L and R until
you hear a click” sound.
5. Putting the appliance into operation and charging
To switch the robot on, press and hold the button .
If the power indicator light is normally on, charge the
robot in the docking station.
Note: If the appliance does not start due to a low
battery, charge it in the docking station and it will start
automatically. Normally, the appliance can only operate
when the battery level is ≥15 %.
6. Connecting a mobile app (you can skip this step)
Read the instructions for connecting Wi-Fi and connect
the mobile app.
7. Start of cleaning
After switching on the robot, briefly press the button
on the robot or start cleaning using the mobile app
(you can pause the appliance by pressing any button
during use).
Note:
The sweeping robot cannot be used to remove fluids.
If the battery charge level is less than 15 %, the
appliance cannot operate. In this case, recharge it.
If the battery charge level is less than 15 %, the
appliance automatically returns to the docking station.
Before use, remove various wires (including the
docking station power cord) from the floor to prevent
outages and damage to objects or wires when the
appliance catches these wires.
Do not carry the robot during operation. Always use
the manual control designed for controlling the robot.
8. Installing the wiping module
a) Installing the wiping cloth: glue the wiping cloth
straight to the bottom of the water tank.
Model VR3100, VR3110 - Hanging water tank
Model VR3120 - Electrically operated water tank
Note: Clean the wiping cloth after use to keep it in good
condition.
b) Fill the water tank: open the cover and fill the tank
with water.
Model VR3100, VR3110 - Hanging water tank
41

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Concept VR3120 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Concept VR3120 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info