804453
20
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
20
EN
CA1010
PRODUCT DESCRIPTION
1 Display
2 Air outlet cover
3 Appliance body
4 Lower grille
5 Filter
6 Appliance base
INSTALLING THE FILTER
Turn the lter base counterclockwise (Fig. 1).
Insert the lter.
Insert the base back and turn it clockwise.
USE
TIMER: When the appliance is running, the operating time can be set using the “timer” button. Set the time to 1 hour, 2 hours, 3 hours, press again to turn o,
the corresponding indicator lights up after the selected time.
Fan speed: Press the fan speed button to change the speed (1-3).
RESET: The appliance is equipped with a lter replacement alert function. When the lter replacement indicator lights up, replace the lters. Then hold the
button for 3 seconds and the countdown will reset.
Ionization: Use the ionization on/o button to switch ionization on or o.
INSTALLATION INSTRUCTIONS
In case of internal dust, such as pollen, the appliance should be placed on the ground. Since pollen, dust, etc. are usually held close to the oor, it is
recommended to place the purier on a at oor in the room.
In order not to block the air inlet and outlet, place the appliance about 30 cm or more away from the left and right sides of the wall, furniture, curtains,
etc. For eective use of the appliance, please keep it at least 20 cm away from the wall behind it.
Do not place any objects on the top of the appliance (this may cause the appliance to malfunction).
Note: Do not place magnets or metal objects on the appliance.
Do not block the air inlet and outlet, for example, do not place any objects on the air outlet. Or on the front side, on the air inlet.
MAINTENANCE
Disconnect the mains supply before cleaning and maintenance.
Place the lter in a ventilated area so that harmful gases and bacteria on the lter surface can evaporate. Do not expose it to excessive sunlight.
Do not wash the lter with water.
Do not work with the lter removed (operation without the eect of removing dust may cause the appliance to malfunction).
If the appliance is idle for a long time, unplug the power cord (it also consumes power in standby mode).
TROUBLESHOOTING
Common faults, error code description and troubleshooting method.
Problem Cause Remedy
It is not possible to turn on or press the
button, no response Is the power cord plugged in? Plug in the power cord.
The odour from the appliance outlet is
unpleasant Is the lter installed correctly? Follow the installation instructions and
precautions.
The purier runs for a long time, but the air
quality does not improve signicantly
The lter indicator is on: this means that the
lter replacement timer has reached the
set value.
After replacing the lter, press the button to restart
thelter.
Control panel
A Ionization on/o
B Light
C Fan speed
D Wi-Fi symbol
E On/o button
F Timer
G Filter restart
20

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Concept CA1010 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Concept CA1010 in de taal/talen: Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 2.76 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info