well as adjusted and measured temperatures. (If this information fails
to appear on the display, press the “RESET” button with a wooden or
plastic stick. To press the button, do not use any electrically conductive
materials or graphite pencil).
After the batteries have been inserted, press the “SET” button. After
the “SET” button is pressed, the display stops flashing, the thermostat
goes to the main screen and the setting process can be started. After
inserting the batteries, snap the front panel of the device into the rear
panel mounted on the wall.
3.2 Setting current day and hour
Press the “DAY” button. At this time only the serial number of the
day will flash on the display of the thermostat and the hour and minute
values can be seen.
Usingthelargeorbuttononthefrontpanelofthedevice,
set the serial number of the current day (Monday 1; Tuesday 2;
10
